Hey guys im wondering what will happen if u root your phone without usb debugging on? Will it cause errors? Cause I have this problem how I always lose battery when my phone is rooted and I dont check usb debugging and when phone is back to normal it charges perfectly fine I just want to know what is usb debugging? What will happen if u dont turn it on while ur rooting
Punishar said:
Hey guys im wondering what will happen if u root your phone without usb debugging on?
Click to expand...
Click to collapse
Nothing.
You can root your phone, enable usb debugging or not, they are no difference if you don't use adb binary.
lelinuxien52 said:
Nothing.
You can root your phone, enable usb debugging or not, they are no difference if you don't use adb binary.
Click to expand...
Click to collapse
thanks
Punishar said:
Hey guys im wondering what will happen if u root your phone without usb debugging on? Will it cause errors? Cause I have this problem how I always lose battery when my phone is rooted and I dont check usb debugging and when phone is back to normal it charges perfectly fine I just want to know what is usb debugging? What will happen if u dont turn it on while ur rooting
Click to expand...
Click to collapse
it is for the pc to establish a direct connection with the phone. if you do not turn it on, there is a chance of getting FAIL in odin.
sriram231092 said:
it is for the pc to establish a direct connection with the phone. if you do not turn it on, there is a chance of getting FAIL in odin.
Click to expand...
Click to collapse
thank you
sriram231092 said:
it is for the pc to establish a direct connection with the phone. if you do not turn it on, there is a chance of getting FAIL in odin.
Click to expand...
Click to collapse
I don't believe that that is true .
jje
sriram231092 said:
it is for the pc to establish a direct connection with the phone. if you do not turn it on, there is a chance of getting FAIL in odin.
Click to expand...
Click to collapse
This is FALSE. No link between rooting the phone with ODIN and the debugging mode.
When you try to root your phone (with ODIN), the device runs a special bootloader (Volume-Down + Home + Power buttons). Odin can flash kernel, recovery and all without any debugging autorization.
Although, debug ON gives nothing interesting for non-developer person without root access (ex. adb remount...).
Related
It happend after I flashed JK5 (I lost track with so many updates)
The phone is not recognized by windows anymore, cannot access odin or anything.
I have another vibrant and is still working so drivers are installed and everything.
The phone does recognize the connection, lets you choose, can get into download mode, but is just not being seen by the PC,
Since the other vibrant connects fine cable is also right, it is a problem strictly with this phone.
I tried flashing other roms, modems, and so on via CWM but problem is not solved.
Any help or ideas will be appreciated
I had the same problem. Someone said try usb debugging, & it worked like a charm.
Applications/development/usb debugging. I hope this helps.
Thanks, I tried that, and all the options for pairing without success
gagb1967 said:
Thanks, I tried that, and all the options for pairing without success
Click to expand...
Click to collapse
If USB debugging is enabled, it shouldn't give you a choice of usb connection mode. Make sure your USB cable is unplugged when you enable debugging, or else it will just tell you to unplug and try again.
bahnburner said:
If USB debugging is enabled, it shouldn't give you a choice of usb connection mode. Make sure your USB cable is unplugged when you enable debugging, or else it will just tell you to unplug and try again.
Click to expand...
Click to collapse
I meant to say, first i tried with debugging enabled, did not work, after that i disable debugging and tried Kies, Emdia Player and Mass Storage, still not recognized, also is not recognized when in Download mode.......
Any Ideas?
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
prashamsahni said:
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
Click to expand...
Click to collapse
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
I have same problem with cable connection
I'm connecting by wifi from play store get air droid or WiFi file transfer its very easy
Sent from my GT-I9100 using xda premium
Sun90 said:
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
Click to expand...
Click to collapse
still the same
prashamsahni said:
still the same
Click to expand...
Click to collapse
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Sun90 said:
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Click to expand...
Click to collapse
my pc is not recognizing it...nothing is happening..i have also tried deleting the drivers of my phone from pc..
charge plus connect
Sun90 said:
go to systemsettings>storage there hit the soft menu button to open settings there u select USB computer connection and in that select MTP mode then connect to pc and check
Click to expand...
Click to collapse
+1 to this. and also your samsung drivers may not be installed yet. :good:
idoleng said:
+1 to this. and also your samsung drivers may not be installed yet. :good:
Click to expand...
Click to collapse
Sun90 said:
well then try this,dwnld the att USB mass storage apk, put it on ur internal sdcard
then install like a normal apk file and reboot, first time when u open the same it will ask for supersu permission grant it.
then connect to pc open the app and tap on the blue android icon so that it turns green and now u will be connected to pc.
Click to expand...
Click to collapse
i tried cleaning the phone's usb receptacle and after that my pc finally responded when my phone was connected to it but the phone is unidentified(yellow triangle pops)...is it because of the wrong driver?
prashamsahni said:
i am running resurrection remix 2.6.1 and when ever i connect my phone to pc via USB it only charges and does not connect...i do not get any drop down options...i have tried using different cables and also different pc's...any help would be really appreciated...thanks in advance!!
Click to expand...
Click to collapse
Did you enable fast charging?
You can change that by changing the settings of the Siyah kernel or the fast charging toggle.
chocolate_lover said:
Did you enable fast charging?
You can change that by changing the settings of the Siyah kernel or the fast charging toggle.
Click to expand...
Click to collapse
no i did not enable fast charging...the only problem i am facing is no pc is recognizing my phone
prashamsahni said:
i tried cleaning the phone's usb receptacle and after that my pc finally responded when my phone was connected to it but the phone is unidentified(yellow triangle pops)...is it because of the wrong driver?
Click to expand...
Click to collapse
uninstall the exsisting drivers from ur PC, then reload the drivers and check
Sun90 said:
uninstall the exsisting drivers from ur PC, then reload the drivers and check
Click to expand...
Click to collapse
did that too..its just driving me crazy..nothing is helping!!
http://forum.xda-developers.com/showpost.php?p=29843320&postcount=16
skip the odin part and download mode.
ksilver89 said:
http://forum.xda-developers.com/showpost.php?p=29843320&postcount=16
skip the odin part and download mode.
Click to expand...
Click to collapse
tried that as well but nothing i think there's something wrong with my phone coz the pc is recognizing every other phone..
Can the pc recognize your phone in download mode? if yes, use odin to flash another kernal.
I have the same problem before and it works for me!
Sent from my GT-I9100 using xda app-developers app
seetings>>developing options>>debugging mode
if it's on turn it off and try to connect and if it's off turn it on and try again
Tefanym said:
seetings>>developing options>>debugging mode
if it's on turn it off and try to connect and if it's off turn it on and try again
Click to expand...
Click to collapse
honadia said:
Can the pc recognize your phone in download mode? if yes, use odin to flash another kernal.
I have the same problem before and it works for me!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
tried debugging didn't work...
and the pc does not recognize my phone even in the download mode....tried flashing through CWM but it didn't work as well...
btw i really appreciate all the help thanks a loot guys!!!
have you tried factory reset on RR?
idoleng said:
have you tried factory reset on RR?
Click to expand...
Click to collapse
through CWM??? then yes but not from the settings>backup&reset...i am not sure but i think they are different..
can anyone tell me how to properly clean phone's USB and charging port...???
Hi all,
I'm planning to root my GS4 but I noticed that when I plug my phone into my computer (win 7) it switches to Media Device instead of staying in Installer mode. I have USB debugging checked and install from unknown sources checked. I've tried to uninstall the drivers and then plug back in to reinstall the drivers but have had the same result.
Has anyone heard of this and know a possible solution or something I could try? I really don't want to start rooting my phone if its not staying in debug mode.
Thanks!
lewbrah
lewbrah said:
Hi all,
I'm planning to root my GS4 but I noticed that when I plug my phone into my computer (win 7) it switches to Media Device instead of staying in Installer mode. I have USB debugging checked and install from unknown sources checked. I've tried to uninstall the drivers and then plug back in to reinstall the drivers but have had the same result.
Has anyone heard of this and know a possible solution or something I could try? I really don't want to start rooting my phone if its not staying in debug mode.
Thanks!
lewbrah
Click to expand...
Click to collapse
You could try to Odin the Stock image and then try to root from there.
DarkMenace said:
You could try to Odin the Stock image and then try to root from there.
Click to expand...
Click to collapse
Thanks for the reply. I am on Stock image (haven't done anything to my phone yet). It's just weird why it won't stay on installer mode if I have debug mode checked.
lewbrah said:
Thanks for the reply. I am on Stock image (haven't done anything to my phone yet). It's just weird why it won't stay on installer mode if I have debug mode checked.
Click to expand...
Click to collapse
Try getting the latest USB drivers from my signature. You should be in MTP mode when it's connected to the PC I do believe. It will then show a picture of you phone and you can browse the device then.
DarkMenace said:
Try getting the latest USB drivers from my signature. You should be in MTP mode when it's connected to the PC I do believe. It will then show a picture of you phone and you can browse the device then.
Click to expand...
Click to collapse
Ok i'll try that. I thought if USB debugging was checked that there was a third mode (installer) that it stayed in besides the Media or Camera options that can be selected because I was reading another post on XDA about the root tool by a post from user Jondoyle24:
http://forum.xda-developers.com/showthread.php?t=2301720&page=11
lewbrah said:
Ok i'll try that. I thought if USB debugging was checked that there was a third mode (installer) that it stayed in besides the Media or Camera options that can be selected because I was reading another post on XDA about the root tool by a post from user Jondoyle24:
http://forum.xda-developers.com/showthread.php?t=2301720&page=11
Click to expand...
Click to collapse
Use the Recovery's/Root tools in my signature. I'll also PM you.
Hello how to enable usb debugging on galaxy mini (gt-s5570) when phone is off ? Because I went to reinstall the software and I forgot to turn on USB debugging and now I can not even turn on :/
oktobus0084 said:
Hello how to enable usb debugging on galaxy mini (gt-s5570) when phone is off ? Because I went to reinstall the software and I forgot to turn on USB debugging and now I can not even turn on :/
Click to expand...
Click to collapse
If you are trying to restore your phone via Odin, there would be no need to enable USB Debugging.
http://droidangel.blogspot.com/2011/05/samsung-galaxy-mini-s5570-original.html
I know it says under: IMPORTANT to enable USB Debugging. They're wrong. USB Debugging / adb commands do not work in the mode you need the phone to be in to restore it anyway, so can't even imagine the point of adding that, especially under the important heading.
Premium account
But there you have to buy premium account to download firmware
oktobus0084 said:
But there you have to buy premium account to download firmware
Click to expand...
Click to collapse
Sorry! Didn't think to check that part.
http://www.sammobile.com/firmwares/1/?model=GT-S5570&pcode=0#firmware
You'll have to join (it's free), and the free download links aren't the fastest, but has everything you need and is legit.
USB on my I9300 keeps disconnecting, i tried Factory reset, wipe all ,fix permissions, odin mode, clean port with needle, but no luck
Phone is charging but usb keeps disconnecting and connecting , it stays connected not even for 1 sec.
Please help me.
Cybrion said:
USB on my I9300 keeps disconnecting, i tried Factory reset, wipe all ,fix permissions, odin mode, clean port with needle, but no luck
Phone is charging but usb keeps disconnecting and connecting , it stays connected not even for 1 sec.
Please help me.
Click to expand...
Click to collapse
Sounds like you need a new usb port to me :crying: If you want to transfer files while you get it fixed you can use one of the many wifi enabled apps to transfer files from your phone to the pc. Also if you want to use Odin there is a mobile version here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << no pc needed (although root is required). Best way to test it is flash another rom if problem is still there then it is hardware problem.
I wanted to do this, but i don't have WIFI , and i couldn't flash even 1mb because of this disconnecting
Cybrion said:
I wanted to do this, but i don't have WIFI , and i couldn't flash even 1mb because of this disconnecting
Click to expand...
Click to collapse
Mobile Odin doesn't need a usb like I said no pc needed you flash from the phone but of course you need root.
tallman43 said:
Mobile Odin doesn't need a usb like I said no pc needed you flash from the phone but of course you need root.
Click to expand...
Click to collapse
ok i'll try