{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cover Algorithm
Simple,Fast,Feature Rich app which uses various Sensors for Locking & Unlocking device
Cover Algorithm is built on the idea that Locking & Unlocking can be more Simple,Fast using various Sensors
The most innovating app for Locking & Unlocking your Device.
Tons of features to come yet.
The fastest updating app & highly daily something NEW !
How it Works :
The most innovating app for Locking & Unlocking your Device.
It uses various sensors of your device like Proximity, Light, Accelerometer, Magnetic Sensors depending upon
which Sensor you choose.
Using, these sensors the app determines whether to lock or unlock the device using some special algorithms
Features :
1. High Accuracy :
The app has high precision of determining whether to lock / unlock device preventing accidental lock
2. Flip Cover Mode :
-Proximity : For normal Flip Cover available
-Magnetic : For an modified Flip Cover which an be achieved pasting an small piece of magnet to the flip cover
(Contact me for more details)
-Light Tablet : For tablets not having Proximity Sensor can use this for their Flip Cover
-Fuse Proximity + Light : Used when more accuracy of locking / unlocking needed & also prevents accidental lock-unlock
-Fuse Shake + Proximity : Close the flip cover & shake the device to lock. Open the flip cover & again shake to unlock
3. Pocket Mode :
-Proximity : For normal pocket keeping
-Shake
-Fuse Proximity + Light
-Fuse Shake + Proximity
-Split Shake & Proximity : Both the sensors can be used for performing the function & also functions of the both can be changed using Split Function
4. FUSION of sensors :
Combination of sensors for better accuracy & preventing accidental lock-unlock
5. Splitting of Sensors :
Both the sensors work independently & can also be set different functions (COOL)
6. Sensor Function :
Your the master select what should sensor do, currently only 3 options are available
- Lock
- Unlock
- Lock & Unlock
Choose what you like & have fun
7. Split 2nd Sensor Function :
You can define another effect for another sensor opening lot more opportunities.
For more details refer Tutorial in App.
8. Disable Lockscreen :
Lock Screen can removed for easier unlocking (Till App is ON)
9. To Keep Screen ON :
If your reading something & wanna keep the screen ON till the phone is turned over or Cover is closed then use this
10. Sensor Sensitivity
11. Auto Unlock
12. Battery Saver :
Stop the apps all the features when the battery level of device is decreased below the level selected
13. Vibration on Screen Lock / Unlock
14. Simple ON/OFF widget
15. Android 2.3 to 4.2 support
16. Tablet support & Tablet Layout support too
17. Ester Egg (Suprise) !!!
18. Highly Advanced & Categorized Settings
19. Vibration time can be customised
20. Weekly new updates
Advance / Key Features :
1. Ignore App List : Select the app for which my app should stop for preventing accidental lock while playing game & app doesn't disturb during that game
2. Night Mode : Select the time & app stops during that time interval basically during Night
3. Calibration : Sensors can be calibrate / tweaked means you can change the value for lock & unlock for your convience
4. Custom ROM support : Cover Algorithm provides an option to apply special custom ROM tweaks during first start up
Uses :
1. Basic Lock / Unlock of device
2. Saves the hardware keys from damage
3. Saves battery by instantly locking device instant of pressing any key
4. No need to find the unlock/lock hardware key again
5. Easy locking & unlocking the device
6. Faster access to device
7. You tell how it benefited you
Note :
Please, read FAQ for more information
More details will added on Thread soon as I tired typing this
Screen Shots :
Check out on PLAY STORE
App Expires on 5th July then new version will be available
OR
Click here to download from PLAY STORE
This is thread is also for discussing issues & bugs found in Cover Algorithm
Report all your queries & discussions here or Support Page
Reserved for Future Use !
and its already 17th june!
Ohh, sorry forgot to change the date
Sent from my GT-I9300 using xda app-developers app
This awsome man
Sent From C6603 Using xda premium
Thanks mate for testing my app.
Just, report all your issues & features you want here or mail me.
If you wish, then please consider making an review of the app.
Thanks again
Sent from my GT-I9300 using xda app-developers app
To make this app trial free just keep tapping on version number.
Sent from my Xperia U using xda app-developers app
Finally, your the guy who found out my Ester Egg
It doesn't remove trial just shifts it by Max 2 days.
Congrats mate for searching.
New update coming today
Sent from my GT-I9300 using xda app-developers app
Hey, guys
Good news for all you guys.
Cover Algorithm has already crossed 1000 downloads in just 10 days.
I wanna thank all of you guys, it's just because of you.
New update will be available in few hrs for increasing expiration date.
It contains tons of updates & features improvements & also bug fixes.
Developing to make life easier & inspiring the world.
Sent from my GT-I9300 using xda app-developers app
Main thread updated.
And support site added too.
Sent from my GS3
After using this app for few days I can say its bug free,I couldnt find any bugs.
Great job!
Thanks mate
The most major update coming soon for Cover Algorithm.
Will, make learning & using tremendously simple than before.
Everything will be bit more faster & less Ram eater which will give you more battery life.
This time it is going to change your life for sure.
Currently, I am also working on adding more images & helping windows soon.
How to use the app videos will also be soon available to watch on YouTube.
Sent from my GS3
Major update available on Play Store to fix all your problems & add new features.
Thank you guys as my app has got about 2000+ downloads which is an great news for me.
Keep updating here & PAID version will soon available
Please, consider making an review if not on Store.
Have fun!
Sent from my GS3
Related
Automaton
Intelligently sleeps & wakes your device right when you want using various Sensors
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Automaton is an Revolutionary step in Automating your Device using Sensors
It is built on the idea that Locking & Unlocking can be more Simple,Fast using various Sensors
XDA EDITOR IN CHIEF Will Verduzco says: “Magically” wakes the device right when you want to use it
The most innovating app for Locking & Unlocking your Device.
Tons of features to come yet.
How it Works :
The most innovating app for Locking & Unlocking your Device.
It uses various sensors of your device like Proximity, Light, Accelerometer, Magnetic Sensors depending upon
which Sensor you choose.
Using, these sensors the app determines whether to lock or unlock the device using special algorithms used in app.
Key Features :
1. High Accuracy :
The app has high precision of determining whether to lock / unlock device preventing accidental lock
2. Flip Cover Mode :
-Proximity : For normal Flip Cover available
-Magnetic : For an modified Flip Cover which an be achieved pasting an small piece of magnet to the flip cover
(Contact me for more details)
-Light Tablet : For tablets not having Proximity Sensor can use this for their Flip Cover
-Fuse Proximity + Light : Used when more accuracy of locking / unlocking needed & also prevents accidental lock-unlock
-Fuse Shake + Proximity : Close the flip cover & shake the device to lock. Open the flip cover & again shake to unlock
3. Pocket Mode :
-Proximity : For normal pocket keeping
-Shake
-Fuse Proximity + Light
-Fuse Shake + Proximity
-Split Shake & Proximity : Both the sensors can be used for performing the function & also functions of the both can be changed using Split Function
4. FUSION of sensors :
Combination of sensors for better accuracy & preventing accidental lock-unlock
5. Splitting of Sensors :
Both the sensors work independently & can also be set different functions (COOL)
6. Sensor Function :
Your the master select what should sensor do, currently only 3 options are available
- Lock
- Unlock
- Lock & Unlock
Choose what you like & have fun
7. Split 2nd Sensor Function :
You can define another effect for another sensor opening lot more opportunities.
For more details refer Tutorial in App.
8. Disable Lockscreen :
Lock Screen can removed for easier unlocking (Till App is ON)
9. To Keep Screen ON :
If your reading something & wanna keep the screen ON till the phone is turned over or Cover is closed then use this
10. Sensor Sensitivity
11. Auto Unlock
12. Battery Saver :
Stop the apps all the features when the battery level of device is decreased below the level selected
13. Vibration on Screen Lock / Unlock
14. Simple ON/OFF widget
15. Android 2.3 to 4.2 support
16. Tablet support & Tablet Layout support too
17. Ester Egg (Suprise) !!!
18. Highly Advanced & Categorized Settings
19. Vibration time can be customised
20. Weekly new updates
Advance Features :
1. Ignore App List : Select the app for which my app should stop for preventing accidental lock while playing game & app doesn't disturb during that game
2. Night Mode : Select the time & app stops during that time interval basically during Night
3. Calibration : Sensors can be calibrate / tweaked means you can change the value for lock & unlock for your convience
4. Custom ROM support : Automaton provides an option to apply special custom ROM tweaks during first start up
5. Every Smartphone & Tablet supported
6. Plethora of Well Tailored Settings for Customizing the working of App
7. Say Time : Tells the time on Unlock
Uses :
1. Basic Lock / Unlock of device
2. Saves the hardware keys from damage
3. Saves battery by instantly locking device instant of pressing any key
4. No need to find the unlock/lock hardware key again
5. Easy locking & unlocking the device
6. Faster access to device
7. Helps you instantly unlock while driving (Don't try at your home !)
You tell how it benefited you ..
Note :
For more details refer Tutorial in App.
Please, read FAQ for more information
More details will added on Thread soon as I tired typing
Screen Shots
Check out on PLAY STORE or Below Attachments
App Expires on 15th August then new version will be available
Automaton Trial
OR
Click here to download from PLAY STORE
Automaton Unlock
OR
Click here to download UNLOCK from PLAY STORE
Consider, paying me a buck for my development
If you don't have Play Store in your region download the below attachment. But, it is recommended to always download from Play Store
Click here to download from Trial from XDA
This is thread is for discussing issues & bugs found in Automaton
Report all your queries & discussions here or mail me
Reserved for FUTURE USE !
Reserved for Future Use
Just a couple of questions
1. Do I need to turn ON motion in settings
2. Does it consume more battery life
Thanks
Sent from my GT-N7105T using xda premium
Thanks mate for testing my app.
I didn't get your 1st question are you asking me about shake
2nd question answer : Nope, I have tried my best to eat the least battery
Yet, you feel that app eating more battery just report me, I will check out your issue
Sent from my GT-I9300 using xda app-developers app
Force closes on Stock MC3
btw any chances to work with black flip cover? I know its some limitation from sensor itself but if still can make batter.
When does it force closes on your device?
Next time just click report & I will check it out
I have heard that issue but, don't face any problem like that on my S3
Maybe, you too shouldn't get that.
Sent from my GT-I9300 using xda app-developers app
Hey, guys thanks for trying out the app
I got some bugs which I will fix in next update
Just, make sure to rate the app on Play Store
Sent from my GT-I9300 using xda app-developers app
Thanks guys for all your reports
All the bugs faced will be fixed in the upcoming update
It will be available in few days
Sent from my GT-I9300 using xda app-developers app
Hello, XDA
Thanks for supporting my app, new major update will be available in few hrs on Play Store.
All, the features requested & bugs reported are fixed
Have fun & please, consider rating the app on Play Store
Sent from my GT-I9300 using xda app-developers app
hello Akshay
I tried your soft and i've got a FC at each reboot my Gnote2 and "start app at startup" checked
Just installed the update and it's the same trouble.
This application works beautifully on my Note II but seem to be having problems with my Motorola Xoom II tablet, anyone tried it on a tablet
Sent from my GT-N7105T using xda premium
Thanks mate for testing the app
This app doesn't work when using Leak ROMs because, some days before I tested on Samsung Leaked ROMs & it didn't work
I will check out what I can do just report me in detail what issue you face
Sent from my GT-I9300 using xda app-developers app
Thanks for testing the app.
I will test my app on actual tablets as, I have just tested on tablet emulators
If your using sensor mode as Light the you may face problem because many tablets stop light sensor on screen off
I will check out what I can do
Sent from my GT-I9300 using xda app-developers app
@akshay I have a s3 i9300 and have started using/testing this app. I must say it has great potential. A problem I have with it though is that if I set it to start on boot it FC's upon first boot. once I press close it starts the service properly a few seconds later. Sometimes it randomly FC's too. Not that bad as it automatically restarts itself, just a minor inconvenience.
One thing I'd like to see is the ability to select multiple sensors and set an action to them individually. Like proximity to lock and light sensor to unlock.
Also what do the custom ROM tweaks actually do?
Thanks for the great app and keep up the good work :thumbup:
TP.
Thanks for trying out my app & finding potential in it.
Well, I don't face any FC on startup mine is too S3.
I will check out the problem just give me some more information
Thanks for request of feature, I will try to add it.
Next thing about the custom ROM tweak:
There is an problem in Samsung Lockscreen because when I try to unlock phone it get lock in instantly
Hence, I need to increase the cpu wake time causing more battery to drain
For Aosp ROMs the 0 value works to unlock & doesn't eat much battery life hence if your using an Aosp lockscreen then set the unlock Screen Timeout to 0
Sent from my GT-I9300 using xda app-developers app
Hey, XDA
Thanks for downloading my app it has been downloaded 691 times which is an great achievement for me
I hope you report all your issues here & consider rating my app
Sent from my GT-I9300 using xda app-developers app
I can't use shake to lock and unlock , can i ?
been trying for the past 15 mins but no luck .
I will take a look at it
Maybe, due to 2nd sensor Function this issue have arised
I will check it out as soon as humanly possible
Sent from my GT-I9300 using xda app-developers app
This is just a very usefull app.
Congrats to developer
) ) ) over the air on GN2 ( ( (
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cover Algorithm
Simple,Fast,Feature Rich app which uses various Sensors for Locking & Unlocking device
Cover Algorithm is built on the idea that Locking & Unlocking can be more Simple,Fast using various Sensors
The most innovating app for Locking & Unlocking your Device.
Tons of features to come yet.
The fastest updating app & highly daily something NEW !
How it Works :
The most innovating app for Locking & Unlocking your Device.
It uses various sensors of your device like Proximity, Light, Accelerometer, Magnetic Sensors depending upon
which Sensor you choose.
Using, these sensors the app determines whether to lock or unlock the device using some special algorithms
Features :
1. High Accuracy :
The app has high precision of determining whether to lock / unlock device preventing accidental lock
2. Flip Cover Mode :
-Proximity : For normal Flip Cover available
-Magnetic : For an modified Flip Cover which an be achieved pasting an small piece of magnet to the flip cover
(Contact me for more details)
-Light Tablet : For tablets not having Proximity Sensor can use this for their Flip Cover
-Fuse Proximity + Light : Used when more accuracy of locking / unlocking needed & also prevents accidental lock-unlock
-Fuse Shake + Proximity : Close the flip cover & shake the device to lock. Open the flip cover & again shake to unlock
3. Pocket Mode :
-Proximity : For normal pocket keeping
-Shake
-Fuse Proximity + Light
-Fuse Shake + Proximity
-Split Shake & Proximity : Both the sensors can be used for performing the function & also functions of the both can be changed using Split Function
4. FUSION of sensors :
Combination of sensors for better accuracy & preventing accidental lock-unlock
5. Splitting of Sensors :
Both the sensors work independently & can also be set different functions (COOL)
6. Sensor Function :
Your the master select what should sensor do, currently only 3 options are available
- Lock
- Unlock
- Lock & Unlock
Choose what you like & have fun
7. Split 2nd Sensor Function :
You can define another effect for another sensor opening lot more opportunities.
For more details refer Tutorial in App.
8. Disable Lockscreen :
Lock Screen can removed for easier unlocking (Till App is ON)
9. To Keep Screen ON :
If your reading something & wanna keep the screen ON till the phone is turned over or Cover is closed then use this
10. Sensor Sensitivity
11. Auto Unlock
12. Battery Saver :
Stop the apps all the features when the battery level of device is decreased below the level selected
13. Vibration on Screen Lock / Unlock
14. Simple ON/OFF widget
15. Android 2.3 to 4.2 support
16. Tablet support & Tablet Layout support too
17. Ester Egg (Suprise) !!!
18. Highly Advanced & Categorized Settings
19. Vibration time can be customised
20. Weekly new updates
Advance / Key Features :
1. Ignore App List : Select the app for which my app should stop for preventing accidental lock while playing game & app doesn't disturb during that game
2. Night Mode : Select the time & app stops during that time interval basically during Night
3. Calibration : Sensors can be calibrate / tweaked means you can change the value for lock & unlock for your convience
4. Custom ROM support : Cover Algorithm provides an option to apply special custom ROM tweaks during first start up
Uses :
1. Basic Lock / Unlock of device
2. Saves the hardware keys from damage
3. Saves battery by instantly locking device instant of pressing any key
4. No need to find the unlock/lock hardware key again
5. Easy locking & unlocking the device
6. Faster access to device
7. You tell how it benefited you
Note :
Please, read FAQ for more information
More details will added on Thread soon as I tired typing this
Screen Shots :
Check out on PLAY STORE
App Expires on 5th July then new version will be available
As, per request of Will, XDA Editor in Chief. Hit thanks to him.:good:
I have uploaded the latest apk here for those who don't have PLAY STORE but, I recommend that you guys to download it here if you have PLAY STORE.
So, that I would get all statistics,bugs,features,etc.
This is thread is also for discussing issues & bugs found in Cover Algorithm
Report all your queries & discussions here or Support Page
Reserved for Future !
Hey, guys
Good news for all you guys.
Cover Algorithm has already crossed 1000 downloads in just 10 days.
I wanna thank all of you guys, it's just because of you.
New update will be available in few hrs for increasing expiration date.
It contains tons of updates & features improvements & also bug fixes.
Developing to make life easier & inspiring the world.
Sent from my GT-I9300 using xda app-developers app
Akshay (Aky) said:
Hey, guys
Good news for all you guys.
Cover Algorithm has already crossed 1000 downloads in just 10 days.
I wanna thank all of you guys, it's just because of you.
New update will be available in few hrs for increasing expiration date.
It contains tons of updates & features improvements & also bug fixes.
Developing to make life easier & inspiring the world.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay idk if it's me or this tab, but when i'm typing the app already locks my tablet, i deactivated it for now and will play arround with the sensors later, see how it goes, anyway, if this app works as it should be, it will get a popular app! Great work
It is not just your problem.
I need to improve sensors working on Tablets.
After that you can easily use the app with tablets.
I will surely try to fix it in upcoming.
Thanks for the report.
Sent from my GT-I9300 using xda app-developers app
Major update available on Play Store to fix all your problems & add new features.
Thank you guys as my app has got about 2000+ downloads which is an great news for me.
Keep updating here & PAID version will soon available
Please, consider making an review if not on Store.
Have fun!
Sent from my GS3
Thanks for you work
UN SALUDO !
It is great pleasure to read.
Thanks mate.
If you have any questions then just feel free to ask.
Have fun
Sent from my GS3
really awesome app!! I have a belkin case, how would i put a magnetic strip in it?
Sent from my GT-P7510
androidcortex said:
really awesome app!! I have a belkin case, how would i put a magnetic strip in it?
Sent from my GT-P7510
Click to expand...
Click to collapse
Thanks mate.
I will giving the guide as soon as possible for me in next update.
Please, consider rating if you don't mind
Sent from my GS3
Cover Algorithm Unlock version available to download. Consider, paying me a buck for my development
OR
Click here to download UNLOCK from PLAY STORE
Well, guys
What features do you want more in unlock version?
Upcoming features are
-Gestures
-More sensor functions like open an app
More upcoming features are given in Planned Features in App
Sent from my GS3
Introduction
Google's Wear OS lacks many things from competitors... One of these is a Barometer-Altimeter application. So why not building one by getting the inspiration from the best one out in the market?
Read the instructions before installation!
Demonstration
App Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tile Screenshot
Tour of the app (gif)
Features
Barometer:
● Real-time pressure display digital
● Real-time pressure red hand indicator
● Graph for the past 6 hours
● Pressure trend over the past 6 hours
● Background collecting of pressure
● Notification for possible storms
Altimeter:
● Real-time altitude display digital
● Real-time altitude red hand indicator
● Graph for the past 6 hours
● Auto calibration of altitude based on weather data
● Manual calibration
TILE:
● Thanks to the Unofficial Tile API: Tile showing pressure and altitude!
Settings:
● Enable / disable storm alert
● Enable / disable automatic calibration of altitude
● Set manual altitude
● Metric / imperial units
● Advanced settings
Installation instructions
● Only supports Wear OS, not standard Android
● Android version must be 8.0+
0 - If any previous version in installed, go to "Settings" > "Apps & Notifications" > "App info" > "Alti-Barometer" > "App Info" > "Clear data" > Confirm
1 - Download the latest .apk file
2 - Install the .apk with adb (tutorial on the third post)
3 - Start the app
4 - Grant the Location permission (optional but recommended, if you want the automatic calibration)
Done!
Update instructions
If you want to update this app to a newer version, uninstall the old version and then install the latest using ADB!
Detailed info about the app
Every 5 minutes a the app will get the pressure from the sensor and store the data.
The weather notification is sent if 4 hPa are dropped in the past three hours.
The trend seen in the barometer is calculated in the past 6 hours.
For the first 6 hours the trend is going to be inaccurate because it doesn't have real data to compare.
Altitude is measured using the barometric formula, considering standard the pressure of 1013.25 hPa.
Issues
Automatic calibration not working on Samsung watches. I don't have a watch to test and I can't fix this bug unfortunally.
Download
Changelog
1.11
● Changed the app UI to make it different from the original app
● Added "Advanced Settings"...
... and that's a secret
1.14
● Added manual calibration
● Fixed a bug involving calibration
1.15
● Added fully customisable units
Auto calibration of altitude - explanation of the physics
I think this is cool to share
Air pressure depends on your altitude, but since air pressure changes normally, the readings are not accurate if the instrument is not correctly calibrated.
Manual calibration can be done... but it's just not practical! Automatic calibration is instead much better.
Let's start with the barometric formula:
Ph = P0 × e^(-α × h)
with constant α = (M × g) / (R × T)
The app gets your location, then finds thanks to the weather API the pressure P0 at sea level.
Once found P0, I can substitute it in the same formula to finally find the actual calibrated altitude
h = ln(Ph / P0) / - α
Ph is now the reading from the sensor and h is the current altitude
The calibration of the altitude highly depends on how accurate are the weather forecast provided...
From my testing I had a +- 10 m which is considerably good, but it depends from place to place.
ADB Tutorial
1) You will need to install ADB drivers to your computer. Suggested tutorial --> [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 | XDA Developers Forums (xda-developers.com)
Assuming you are using Windows, you should find a folder named "adb" inside the C drive with some files in it.
2) Place inside this folder the apk you want to install.
3) Enable "USB Debugging" on the device you want to install the apk on. This setting is hidden inside the "Developer Settings", that you can enable by pressing 7 times on the "Build Number" under "Device Info". There are many videos that show this.
4) Open the command prompt inside the "adb" folder. To do so using Windows, just press Shift + Right Click of the mouse and then select "Open PowerShell Window".
5) Connect your smartwatch to the PC with the usb cable.
6) On the PowerShell type "adb devices" without quotes and confirm with enter. Make sure the android device shows a message.
7) On the device press "Allow always" (or something like that).
8) On the PowerShell type "adb install Alti-Barometer1.15.apk" without quotes and confirm with enter.
DONE!
Suunto 7 ( Display resolution 454 x 454)
First install not test but Thanks for now. ( beautiful UI )
tom.android said:
Suunto 7 ( Display resolution 454 x 454)
First install not test but Thanks for now. ( beautiful UI )
Click to expand...
Click to collapse
Thank you so much! I'd appreciate a little review here in the comments after you test it so I know if there are some areas that can be improved
Especially the thing i'm most concerned is battery life so if you find problems you know what to do!
New update
● Fixed a minor bug involving a predefined value where for the first three hours of app running, no notification would display
● The altitude graph only displays rounded integers numbers, now is much clearer (no more spikes)
● Fixed a bug involving calibration
To update it is recommended to follow the procedure described in the original post
calugj said:
● Added tile! But for now it's just a static image representing how it will look like when finished....
Click to expand...
Click to collapse
Can shows get lococation access icon (status) and beep sound in Altimeter and Tile page ?
Thanks
tom.android said:
Can shows get lococation access icon (status) and beep sound in Altimeter and Tile page ?
Thanks
Click to expand...
Click to collapse
This project's purpose is to replicate almost identically both in terms of UI and functionality the Samsung Alti-barometer app, which is preinstalled on Samsung smartwatches.
This is the app I'm talking about -> https://galaxystore.samsung.com/geardetail/com.samsung.alti-barometer
I don't understand what you mean by beep sound (what's the beep for?) and location icon (you mean that the app should display an icon when it gets the location?), especially because I don't think the original app has these features.
Final Update
The latest update features a new UI for the tile.
calugj said:
The latest update features a new UI for the tile.
Click to expand...
Click to collapse
Thanks for your work, Can we access the app from tile and the full app can keep alive (not close itself till we close it.)
from my Suunto 7
and the last quest why altitude num from tile not the same as app itself. (from my picture --3m & --1m)
tom.android said:
Thanks for your work, Can we access the app from tile and the full app can keep alive (not close itself till we close it.)
from my Suunto 7
and the last quest why altitude num from tile not the same as app itself. (from my picture --3m & --1m)
Click to expand...
Click to collapse
1) Click on tile added
2) I managed to fix that.
NOTE: Your issue might also be related to always on. If you have always on disabled, after some seconds the display will lock. With this fix, if you turn your wrist (or click a button, or touch the screen), the app will return visible instead of showing the clock.
If you have always on enabled... No issues either because always on is supported and the app will keep open.
3) That's because the tile does not show real time data, while the app does.
This app collects data in the background every five minutes. This data serves for: pressure trend, notification alert and graphs. The value you see in the altimeter and barometer page are instead real time data, polled and computed instantly.
The tile shows the last collected data from the background service so what you see in the tile is at worst five minutes old.
It's not beneficial for battery life to have high refresh rate tiles... and for that there's the application!
Why v1.7 is not calibrated? please help. (After installed 24 hrs.) THANKS
tom.android said:
Why v1.7 is not calibrated? please help. (After installed 24 hrs.) THANKS
Click to expand...
Click to collapse
This is strange cause I didn't change anything on the background service from last update.
If you followed the installation instructions from original post I'll suggest try checking again these things:
1) Go to "Settings" > "Apps & Notifications" > "App info" > "Alti-Barometer" > "Permissions" and make sure that "Location" is enabled
2) watch has to be connected to the internet, it doesn't matter if through WiFi, through 4G or trough your phone's bluetooth (so no airplane mode)
3) watch's location can depend on phone's location. Try checking if both are active in the settings (but I assume they both are because it worked for you yesterday)
4) as a last step I'll suggest to reboot... Most of the times that solves any issues
Keep in mind calibration is set every 4 hours so if one of these actually solved your problem you'll notice it after some time!
If it still doesn't work let me know because it is strange
Storm Warning Notification is OK.
we have 7 day Weather Forecast, During 3 – 5 Aug, people in the whole country should beware of severe conditions and stay tuned for the weather update. All ships should proceed with caution and should keep ashore including keeping away from thundershower bra bra bra...
and I 've trid to clean new installation hope auto calibration work again.
Altitude is not calibrated, does not calibrate at all, location permission is on, maps work, but altimeter says calibrated never.
Ticwatch Pro LTE
LaurisLT said:
Altitude is not calibrated, does not calibrate at all, location permission is on, maps work, but altimeter says calibrated never.
Ticwatch Pro LTE
Click to expand...
Click to collapse
I'll definitely have to check what's going on... However one thing that bothers me is that from the weather provider portal I can see that today were made 2 API requests... So somebody has this feature working. I'll dig more and update you if I find something. Also the fact that currently I don't have a phisical watch to test it apart from the emulator doesn't help
finally calibrated by V1.7 , after 4 hrs of Clean install . But don't known why minus altitude value.
tom.android said:
finally calibrated by V1.7 , after 4 hrs of Clean install . But don't known why minus altitude value.
Click to expand...
Click to collapse
Last calibrated was at 18:10 and the altitude +8 m should be more or less correct I guess. What happened in your case is that air pressure in your location increased as happens naturally during the day, tricking the altimeter to think that you went lower on altitude. Probably what's going to happen at 22:10 is a new calibration that should show accurate altitude. From my side I can't do anything about this, It has to do on how accurate the weather API are in your location and on how the pressure changes throughout the day. In days where air pressure is pretty stationary you won't notice it
Consider the altimeter value with a precision of 10 meters on raw value. Delta value (like if you want to measure how tall a building is) are precise instead!
News on the automatic calibration bug
I tested the app with the emulator and managed to fix that issue.
I'll try to explain what the problem was.
This app doesn't use real time GPS for location, it uses instead the so called "coarse location", that is based on cellular towers. The reasons are simple: the app doesn't need the metric precision given by the GPS, and "coarse location" is much less energy consuming.
Right after every reboot, the system location is a "null" value, meaning it is not usable for my app. At this stage the app couldn't calibrate the altimeter.
Then after approximately half an hour, the system location started giving usable values for the app and after that moment the calibration worked every single time.
So in conclusion, after a reboot, the app wants to calibrate the altimeter, but until the system location is not "null", it won't and there's no guarantee that the system will update it soon.
Solving this issue was pretty easy: I had to manually refresh the location right when needed.
Now it should work as expected.
By the way I moved the download link directly to xda attachments
At the time of the edit of this post I just reuploaded ver 1.8... I forgot to replace one thing I used on the debugging phase
I have found another bug. If the location takes a lot of time to be collected (which might happen), the background service will lock, showing a constant notification that is impossible to dismiss... This is not a normal behaviour and I will make a fix hoping that it will be the last.
EDIT: Updated
This app was initially developed for Samsung Galaxy devices with Always on Display. As Pixel devices also have an Always on Display i decided to port the Samsung version to Pixel devices.
You need a notification light / LED for your Pixel 6!
With aodNotify you can easily add a notification light / LED to your Pixel 6!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your Pixel 6 or Pixel 5!
As the notification light is integrated in Google's Always On Display it has minimal battery consumption and doesn't drain your battery like other apps which keep your phone awake!
MAIN FEATURES
• Notification light / LED for Pixel 6, Pixel 5 or Pixel 4a!
• Low energy notification preview
• Activate Always On Display (AOD) only on notifications
• Charging / Low battery light / LED
MORE FEATURES
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
BATTERY USAGE PER HOUR ~:
• LED - 3.0%
• LED & INTERVAL - 2.0%
• LED & ECO ANIMATION - 1.8%
• LED & ECO ANIMATION & INTERVAL - 1.5%
• NOTIFICATION PREVIEW - 1.0%
• ALWAYS ON DISPLAY - 1.0%
Without notification light the app consumes almost 0% battery!
The Pixel 6's Tensor chip has a context hub, which is a ultra low power context engine especially made for the AOD and other background tasks, wich should reduce power consumption a lot. The values above are approximate values from old Pixel devices.
DOWNLOAD:
DEVICES
• Pixel 6 / 6 Pro
• Pixel 5
• Pixel 4a
• Pixel ...
NOTES
• The app is still in beta stage, errors may occur!!
• Google may block this app with future updates!
• Please check if the app is compatible before updating phone software!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"Google Pixel" is a protected trademark of "Google LLC"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The position of the light around the camera cutout may not be accurate in this beta.
Position can be adjusted in Notification light > Size & position > fine tuning section in the app.
Very nice! Already installed yesterday, when it was only on the Pixel 5 forums. Will use for a few days and report battery usage.
(Since the default ring position is not adjusted to the camera, I adjusted manually. Y offset 60 and X/Y size at -52 seems to be fine)
@go_roy
Thanks for the feedback. Theres an update on the way fixing position and some other issues.
You can set position offset to 0 on next release then.
Trying to optimize as soon as i get my Pixel.
The new beta is online. Positions around camera should be correct now.
You may have to reset the position offsets to 0 after the update.
Any feedback about camera positions is appreciated! Enjoy!
Lookign good so far, thanks for your efforts. Description says it hides the fingerprint icon, which is something I really want .. but can't see how to do this? Any help much appreciated. Cheers.
darfbozo said:
Lookign good so far, thanks for your efforts. Description says it hides the fingerprint icon, which is something I really want .. but can't see how to do this? Any help much appreciated. Cheers.
Click to expand...
Click to collapse
Oh, sorry that text was from the oneplus version. Will do some testing if possible on pixel
Jawomo said:
Oh, sorry that text was from the oneplus version. Will do some testing if possible on pixel
Click to expand...
Click to collapse
Excellent, thank you.
Nice app! I have bought it. It works really well on a Redmi Note 10 Pro too. I'll use it on that while I wait for my pixel 6 to arrive after DPD UK have lost it...
Really nice app. Cant believe this is not build in.
Can you post the APK file as well for those without Google Play Store access? Thanks for the awesome app!
Edit: just bought the pro version to be able to customize east apps color! This app is sweet!
Seems like a great app so I had no choice but to buy you more coffee
Thank you @Jawomo for a superb app, let's hope that the battery claims are as good as the app is already.
has the option for the screen edge LED been removed?
@Cnsxskillz1
Currently yes. Theres a bug in android 12.
Still looking for a workaround
@Jawomo great app, bought premium right away.
One thing I would find cool is if the notification dot could move around the screen a bit to reduce burnin. Like have a slider for how much the dot moves around the screen.
BunkMoreland said:
@Jawomo great app, bought premium right away.
One thing I would find cool is if the notification dot could move around the screen a bit to reduce burnin. Like have a slider for how much the dot moves around the screen.
Click to expand...
Click to collapse
Thanks! Had this once and people complained that the dot moves in unwanted regions. As it blinks burn in should not be a problem. Maybe ill readd this sometime in future
Thanks for porting this to Pixel 6! I'm testing now...
Jawomo said:
Thanks! Had this once and people complained that the dot moves in unwanted regions. As it blinks burn in should not be a problem. Maybe ill readd this sometime in future
Click to expand...
Click to collapse
Cool good to know.
Does the app support "pocket detection"? So it doesn't to off when the proximity sensors goes off?
I love this idea, my Moto phone had this and it was great. Now, with the way always on is handled I keep my phone face down mostly. Can this be used on the rear of the phone?
Is there any way to enable edge lighting for notifications on this app? instead of notification dot or around the camera glow... I don't see it in my options and I have the pro version
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
LMODroid is an AOSP-based mobile OS aiming to ease transition to de-googled(*) Android use-cases, while also supporting using Google services. Additionally, we want to make everyday experience better with useful features
The term de-googled is complicated, as AOSP by itself is by Google. We aim to reduce Google's data collection on mobile devices and make active efforts to remove contacts to Google servers and document more regarding this topic, but we value application compatibility over total Google avoidance.
Features:
Code:
UI/UX:
- Blur control
- Transparent control
Network & internet
- Control connected devices to hotspot (disconnect/backlist)
- eSIM support
- VPN tethring
Display:
- Lockscreen media art
- Pocket detection
- Customizable Wallpaper & style
- OSS Desktopmode
Sounds & vibration:
- In-call vibration
- Dual SIM rington
- Per-app volume control
Security:
- Enforcing selinux
- Encrypted storage
- OSS Face Unlock
- 3x3 / 4x4 / 5x5 / 6x6 pattern size
- Scramble pin layout
- QS toggle on lockscreen
- App lock
- Auto reboot
- Restrict USB
- Emergancy Panic trigger
Applications:
- Game Space
- Transistent task mode
- Parallel Space
Buttons:
- Taskbar toggle
- Invert layout
- Force navigation bar enabler
- Edge long swipe actions
- Advanced restart
- Power menu styles
- Long press button to enable torch
- Volume button control playback
- Volume panel on left
- Partial screenshot
Statusbar:
- QS quick pull down
- Network traffic monitor
- System icons tuner
- Old style signal icons
- Wi-Fi standart Icons
- Clock position
- Show seconds
- Auto hide
- AM/PM style
- Battery style
- QS Auto brightness toggle
- Data usage
Changelogs:
https://get.libremobileos.com/changes
Download:
https://get.libremobileos.com/devices/surya/builds
Notice:
- Recommended firmware is latest stable firmware
- No custom kernels and custom modules are supported. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Screenshots:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation:
Download *.img files from download section and install them from fastboot.
example:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash super super_empty.img
After installed all .img files reboot to recovery and follow these steps:
Factory reset:
- format data/cache/system
Apply update -> Apply from ADB:
Code:
adb sideload LMODroid-*-RELEASE-surya.zip
Useful links:
Web: https://libremobileos.com/
Download: https://get.libremobileos.com/
Gerrit:
https://gerrit.libremobileos.com/
Jenkins: https://jenkins.libremobileos.com/
Git: https://git.libremobileos.com/LMODroid
Git devices: https://git.libremobileos.com/LMODroid-Devices
Github(mirror): https://github.com/LMODroid
Github devices(mirror): https://github.com/LMODroid-Devices
Telegram discussion group: https://t.me/LMODroid_Discussion
wow! looks promising! pretty nice features and settings.
one very important question for me.
are the bluetooth hi-res audio capabilities supported on this rom? (aptx aptxHD, LDAC)
Excellent, was waiting for a XDA thread for this!
Which camera does it come with?
Which GCam is it compatible with?
Any GCam version + config recommendations?
Download link not working?
greekfragma said:
wow! looks promising! pretty nice features and settings.
one very important question for me.
are the bluetooth hi-res audio capabilities supported on this rom? (aptx aptxHD, LDAC)
Click to expand...
Click to collapse
aac aptx aptxhd ldac offload are supported
Master One said:
Excellent, was waiting for a XDA thread for this!
Which camera does it come with?
Which GCam is it compatible with?
Any GCam version + config recommendations?
Click to expand...
Click to collapse
Aperture (Official LineageOS camera)
We don't support others camera and take care about stock camera app only but others should be work fine.
You can try others and let us know
Master One said:
Download link not working?
Click to expand...
Click to collapse
It's working
iKeramat said:
Aperture (Official LineageOS camera) We don't support others camera and take care about stock camera app only but others should be work fine. You can try others and let us know
Click to expand...
Click to collapse
This turns out to be tricky, which is why I hope that someone with more time at hands can have a look and report back here.
From the LOS thread:
Camera Notes
ANX camera is not recomended and will most probably NOT work.
To get a fully working camera try one of the gcams here.
Do not forget to copy&load the associated xml file!
Official LOS uses oss camera service, so xml written for other custom roms might not work.
The gcams at the above link have modified xmls for LOS.
Click to expand...
Click to collapse
So far I have tried my previous favorite (NGCam v7.4.104-v2.0) that I have in use on ArrowOS 11 (last version with MIUI vendor), but it crashes as was to be expected due to the camera service as mentioned above.
I have also tried UltraCVM (v8.1 from the link above and v8.4.300.10u_ucvm from the GCam Hub) which worked with the provided config file, but unfortunately it does not seem to support a 3rd party gallery, I could not find out how to change camera lenses, and at one point while playing around with it, it just crashed.
So in the end I really would like to have a camera app that supports slow motion and time lapse video, 3rd party gallery, all the available lenses and runs stable.
Master One said:
This turns out to be tricky, which is why I hope that someone with more time at hands can have a look and report back here.
From the LOS thread:
So far I have tried my previous favorite (NGCam v7.4.104-v2.0) that I have in use on ArrowOS 11 (last version with MIUI vendor), but it crashes as was to be expected due to the camera service as mentioned above.
I have also tried UltraCVM (v8.1 from the link above and v8.4.300.10u_ucvm from the GCam Hub) which worked with the provided config file, but unfortunately it does not seem to support a 3rd party gallery, I could not find out how to change camera lenses, and at one point while playing around with it, it just crashed.
So in the end I really would like to have a camera app that supports slow motion and time lapse video, 3rd party gallery, all the available lenses and runs stable.
Click to expand...
Click to collapse
Actually with aperture all of sensors will work
iKeramat said:
Actually with aperture all of sensors will work
Click to expand...
Click to collapse
Just read up on Aperture, and indeed makes sense and needs to be supported, but still, it does not have slow motion and time lapse video and I'm not sure about the use of lenses:
Support for auxiliary cameras (this has to be enabled outside of the Aperture app)
Click to expand...
Click to collapse
Not sure what that means and if this has been enabled for the two additional lenses that we have on the POCO X3 NFC. I guess this should be the selector that reads ".9 | .9 | 1" in the middle of the lower part of this screenshot:
But unfortunately this is not working as the lens selection (main, macro and wide angle) obviously isn't correctly configured (though there are no UI options for that):
The "1" seems to be the main lens, which is working.
The middle ".9" is not working at all (makes the picture freeze and something crashes, because also the UI keeps working, the camera picture does not recover), so this must be an invalid camera ID.
The left ".9" looks like main lens in black & white, so that's also an invalid camera ID because that lens is not supposed to be used on its own, but does its job in conjunction with the main camera for more depth (or something like that).
So the camera ID configuration needs to be corrected and the UI needs a proper camera labeling (so that you can see which of the three selectors is which lens).
There is also a picture of the settings menu, which looks differently from the one we have:
We don't have the photo stabilization and the the lower two video stabilization options.
Hello all. do we have any feedback from this rom if anyone is using it? I would like to test it probably next weekend so I would appreciate anyone that has some experience till now.
greekfragma said:
Hello all. do we have any feedback from this rom if anyone is using it? I would like to test it probably next weekend so I would appreciate anyone that has some experience till now.
Click to expand...
Click to collapse
All good except the camera issue. Aperture is just not good enough, though of course it makes sense as it's OSS. Haven't found the time to play with various Gcam versions and have been testing crDroid in the meantime (though that one is not to stay as the next version will be rebased to LOS as well and requires a clean flash).
Master One said:
All good except the camera issue. Aperture is just not good enough, though of course it makes sense as it's OSS. Haven't found the time to play with various Gcam versions and have been testing crDroid in the meantime (though that one is not to stay as the next version will be rebased to LOS as well and requires a clean flash).
Click to expand...
Click to collapse
Is the photo quality really bad with this Aperture camera app?
AngusYoung14 said:
Is the photo quality really bad with this Aperture camera app?
Click to expand...
Click to collapse
YES!
SmartJuwel said:
YES!
Click to expand...
Click to collapse
Thanks!
Is there another camera app that suports 3rd party gallery?