This app was initially developed for Samsung Galaxy devices with Always on Display. As Pixel devices also have an Always on Display i decided to port the Samsung version to Pixel devices.
You need a notification light / LED for your Pixel 6!
With aodNotify you can easily add a notification light / LED to your Pixel 6!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your Pixel 6 or Pixel 5!
As the notification light is integrated in Google's Always On Display it has minimal battery consumption and doesn't drain your battery like other apps which keep your phone awake!
MAIN FEATURES
• Notification light / LED for Pixel 6, Pixel 5 or Pixel 4a!
• Low energy notification preview
• Activate Always On Display (AOD) only on notifications
• Charging / Low battery light / LED
MORE FEATURES
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
BATTERY USAGE PER HOUR ~:
• LED - 3.0%
• LED & INTERVAL - 2.0%
• LED & ECO ANIMATION - 1.8%
• LED & ECO ANIMATION & INTERVAL - 1.5%
• NOTIFICATION PREVIEW - 1.0%
• ALWAYS ON DISPLAY - 1.0%
Without notification light the app consumes almost 0% battery!
The Pixel 6's Tensor chip has a context hub, which is a ultra low power context engine especially made for the AOD and other background tasks, wich should reduce power consumption a lot. The values above are approximate values from old Pixel devices.
DOWNLOAD:
DEVICES
• Pixel 6 / 6 Pro
• Pixel 5
• Pixel 4a
• Pixel ...
NOTES
• The app is still in beta stage, errors may occur!!
• Google may block this app with future updates!
• Please check if the app is compatible before updating phone software!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"Google Pixel" is a protected trademark of "Google LLC"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The position of the light around the camera cutout may not be accurate in this beta.
Position can be adjusted in Notification light > Size & position > fine tuning section in the app.
Very nice! Already installed yesterday, when it was only on the Pixel 5 forums. Will use for a few days and report battery usage.
(Since the default ring position is not adjusted to the camera, I adjusted manually. Y offset 60 and X/Y size at -52 seems to be fine)
@go_roy
Thanks for the feedback. Theres an update on the way fixing position and some other issues.
You can set position offset to 0 on next release then.
Trying to optimize as soon as i get my Pixel.
The new beta is online. Positions around camera should be correct now.
You may have to reset the position offsets to 0 after the update.
Any feedback about camera positions is appreciated! Enjoy!
Lookign good so far, thanks for your efforts. Description says it hides the fingerprint icon, which is something I really want .. but can't see how to do this? Any help much appreciated. Cheers.
darfbozo said:
Lookign good so far, thanks for your efforts. Description says it hides the fingerprint icon, which is something I really want .. but can't see how to do this? Any help much appreciated. Cheers.
Click to expand...
Click to collapse
Oh, sorry that text was from the oneplus version. Will do some testing if possible on pixel
Jawomo said:
Oh, sorry that text was from the oneplus version. Will do some testing if possible on pixel
Click to expand...
Click to collapse
Excellent, thank you.
Nice app! I have bought it. It works really well on a Redmi Note 10 Pro too. I'll use it on that while I wait for my pixel 6 to arrive after DPD UK have lost it...
Really nice app. Cant believe this is not build in.
Can you post the APK file as well for those without Google Play Store access? Thanks for the awesome app!
Edit: just bought the pro version to be able to customize east apps color! This app is sweet!
Seems like a great app so I had no choice but to buy you more coffee
Thank you @Jawomo for a superb app, let's hope that the battery claims are as good as the app is already.
has the option for the screen edge LED been removed?
@Cnsxskillz1
Currently yes. Theres a bug in android 12.
Still looking for a workaround
@Jawomo great app, bought premium right away.
One thing I would find cool is if the notification dot could move around the screen a bit to reduce burnin. Like have a slider for how much the dot moves around the screen.
BunkMoreland said:
@Jawomo great app, bought premium right away.
One thing I would find cool is if the notification dot could move around the screen a bit to reduce burnin. Like have a slider for how much the dot moves around the screen.
Click to expand...
Click to collapse
Thanks! Had this once and people complained that the dot moves in unwanted regions. As it blinks burn in should not be a problem. Maybe ill readd this sometime in future
Thanks for porting this to Pixel 6! I'm testing now...
Jawomo said:
Thanks! Had this once and people complained that the dot moves in unwanted regions. As it blinks burn in should not be a problem. Maybe ill readd this sometime in future
Click to expand...
Click to collapse
Cool good to know.
Does the app support "pocket detection"? So it doesn't to off when the proximity sensors goes off?
I love this idea, my Moto phone had this and it was great. Now, with the way always on is handled I keep my phone face down mostly. Can this be used on the rear of the phone?
Is there any way to enable edge lighting for notifications on this app? instead of notification dot or around the camera glow... I don't see it in my options and I have the pro version
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cover Algorithm
Simple,Fast,Feature Rich app which uses various Sensors for Locking & Unlocking device
Cover Algorithm is built on the idea that Locking & Unlocking can be more Simple,Fast using various Sensors
The most innovating app for Locking & Unlocking your Device.
Tons of features to come yet.
The fastest updating app & highly daily something NEW !
How it Works :
The most innovating app for Locking & Unlocking your Device.
It uses various sensors of your device like Proximity, Light, Accelerometer, Magnetic Sensors depending upon
which Sensor you choose.
Using, these sensors the app determines whether to lock or unlock the device using some special algorithms
Features :
1. High Accuracy :
The app has high precision of determining whether to lock / unlock device preventing accidental lock
2. Flip Cover Mode :
-Proximity : For normal Flip Cover available
-Magnetic : For an modified Flip Cover which an be achieved pasting an small piece of magnet to the flip cover
(Contact me for more details)
-Light Tablet : For tablets not having Proximity Sensor can use this for their Flip Cover
-Fuse Proximity + Light : Used when more accuracy of locking / unlocking needed & also prevents accidental lock-unlock
-Fuse Shake + Proximity : Close the flip cover & shake the device to lock. Open the flip cover & again shake to unlock
3. Pocket Mode :
-Proximity : For normal pocket keeping
-Shake
-Fuse Proximity + Light
-Fuse Shake + Proximity
-Split Shake & Proximity : Both the sensors can be used for performing the function & also functions of the both can be changed using Split Function
4. FUSION of sensors :
Combination of sensors for better accuracy & preventing accidental lock-unlock
5. Splitting of Sensors :
Both the sensors work independently & can also be set different functions (COOL)
6. Sensor Function :
Your the master select what should sensor do, currently only 3 options are available
- Lock
- Unlock
- Lock & Unlock
Choose what you like & have fun
7. Split 2nd Sensor Function :
You can define another effect for another sensor opening lot more opportunities.
For more details refer Tutorial in App.
8. Disable Lockscreen :
Lock Screen can removed for easier unlocking (Till App is ON)
9. To Keep Screen ON :
If your reading something & wanna keep the screen ON till the phone is turned over or Cover is closed then use this
10. Sensor Sensitivity
11. Auto Unlock
12. Battery Saver :
Stop the apps all the features when the battery level of device is decreased below the level selected
13. Vibration on Screen Lock / Unlock
14. Simple ON/OFF widget
15. Android 2.3 to 4.2 support
16. Tablet support & Tablet Layout support too
17. Ester Egg (Suprise) !!!
18. Highly Advanced & Categorized Settings
19. Vibration time can be customised
20. Weekly new updates
Advance / Key Features :
1. Ignore App List : Select the app for which my app should stop for preventing accidental lock while playing game & app doesn't disturb during that game
2. Night Mode : Select the time & app stops during that time interval basically during Night
3. Calibration : Sensors can be calibrate / tweaked means you can change the value for lock & unlock for your convience
4. Custom ROM support : Cover Algorithm provides an option to apply special custom ROM tweaks during first start up
Uses :
1. Basic Lock / Unlock of device
2. Saves the hardware keys from damage
3. Saves battery by instantly locking device instant of pressing any key
4. No need to find the unlock/lock hardware key again
5. Easy locking & unlocking the device
6. Faster access to device
7. You tell how it benefited you
Note :
Please, read FAQ for more information
More details will added on Thread soon as I tired typing this
Screen Shots :
Check out on PLAY STORE
App Expires on 5th July then new version will be available
As, per request of Will, XDA Editor in Chief. Hit thanks to him.:good:
I have uploaded the latest apk here for those who don't have PLAY STORE but, I recommend that you guys to download it here if you have PLAY STORE.
So, that I would get all statistics,bugs,features,etc.
This is thread is also for discussing issues & bugs found in Cover Algorithm
Report all your queries & discussions here or Support Page
Reserved for Future !
Hey, guys
Good news for all you guys.
Cover Algorithm has already crossed 1000 downloads in just 10 days.
I wanna thank all of you guys, it's just because of you.
New update will be available in few hrs for increasing expiration date.
It contains tons of updates & features improvements & also bug fixes.
Developing to make life easier & inspiring the world.
Sent from my GT-I9300 using xda app-developers app
Akshay (Aky) said:
Hey, guys
Good news for all you guys.
Cover Algorithm has already crossed 1000 downloads in just 10 days.
I wanna thank all of you guys, it's just because of you.
New update will be available in few hrs for increasing expiration date.
It contains tons of updates & features improvements & also bug fixes.
Developing to make life easier & inspiring the world.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay idk if it's me or this tab, but when i'm typing the app already locks my tablet, i deactivated it for now and will play arround with the sensors later, see how it goes, anyway, if this app works as it should be, it will get a popular app! Great work
It is not just your problem.
I need to improve sensors working on Tablets.
After that you can easily use the app with tablets.
I will surely try to fix it in upcoming.
Thanks for the report.
Sent from my GT-I9300 using xda app-developers app
Major update available on Play Store to fix all your problems & add new features.
Thank you guys as my app has got about 2000+ downloads which is an great news for me.
Keep updating here & PAID version will soon available
Please, consider making an review if not on Store.
Have fun!
Sent from my GS3
Thanks for you work
UN SALUDO !
It is great pleasure to read.
Thanks mate.
If you have any questions then just feel free to ask.
Have fun
Sent from my GS3
really awesome app!! I have a belkin case, how would i put a magnetic strip in it?
Sent from my GT-P7510
androidcortex said:
really awesome app!! I have a belkin case, how would i put a magnetic strip in it?
Sent from my GT-P7510
Click to expand...
Click to collapse
Thanks mate.
I will giving the guide as soon as possible for me in next update.
Please, consider rating if you don't mind
Sent from my GS3
Cover Algorithm Unlock version available to download. Consider, paying me a buck for my development
OR
Click here to download UNLOCK from PLAY STORE
Well, guys
What features do you want more in unlock version?
Upcoming features are
-Gestures
-More sensor functions like open an app
More upcoming features are given in Planned Features in App
Sent from my GS3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MeanPop for the Nexus 6!
MeanPop is built on stock 5.1.0 base (LVY47H)
TOP FEATURES
Color Battery %
Green battery when charging (% still visible while charging)
Time w/seconds and date on ambient display and lockscreen
Native notification LED
No special kernels or apps needed: the LED "just works"
Supports LED color (chosen in any app)
Flashing or solid LED (configurable - see post 2)
User configurable LED color priority system! (see post 2)
Can be turned off completely in build.prop (last line)
MEANPOP GOALS
----------------------------------------------------------------------------------------------------------------------------
To be clean: mostly stock look and feel
To be mean: apply optimizations for smoother performance
To be nice: provide cool functionality not present in the stock base
VIDEOS
----------------------------------------------------------------------------------------------------------------------------
Thanks Mike for the great video review!
NEWS/HAPPENINGS
----------------------------------------------------------------------------------------------------------------------------
v2.15 - Added color battery text (configurable, see post 2) and reduced contrast "Android is starting..." dialog to reduce screen burn-in
ROM/RADIO CONFUSION?
We developers are still getting a handle on exactly what changes were made in LMD47D, E, M, I and LVY57H and which radio works best for which carrier. Keep in mind that this ROM will run with any of those radios, just be sure to use the radio that is best for your carrier. You are likely to get service on any carrier using any of the three available bootloaders/radios but based on feedback in multiple threads and user testing, it is my recommendation that:
- T-Mobile users use the LMY47M bootloader/radio (flash via TWRP - thanks @scrosler)
- Everyone else use the LMY47E bootloader/radio (batch file: flash via fastboot - thanks @scrosler)
NEED A PROXIMITY SENSOR FIX?
MeanPop v2.09 now has the proximity sensor fix built in: you will not have proximity sensor issues with this ROM!
For those running other 5.1 ROMs, some users are experiencing problems with the increased sensitivity of the proximity sensor on 5.1 ROMs and are cutting, removing, or buying new screen protectors to fix the problem. This is no longer necessary! Just download my proximity sensor fix. It should fix your proximity sensor on any 5.1 stock based ROM. Installation is simple: just install your ROM and then flash the fix over top.
SECTION I: ROM SPECS
The clean:
Built on stock 5.1.0 LVY47H
Smooth and stable (I don't release betas)
User configurable options (see post 2) - set once and they stick through updates: no weeding through Aroma settings with each update!
The mean:
Performance tweaks
Screen on/off performance and battery tweaks for snappier UI and better battery
The nice:
Rooted (SuperSU)
Non-forced encryption
init.d support
Signature checking disabled
De-odexed for your modding pleasure
Zipaligned
6 way power/reboot menu (includes ability to turn off ambient display when you pick up the phone - useful when phone is in a moving vehicle)
To disable ambient display activation due to movement when in a vehicle, long press power and check the box for "Ambient Pickup OFF" (ambient display will still light for incoming notifications)
Re-enable ambient display on pickup with a long press on power, then check "Ambient Pickup ON"
Built in proximity sensor fix: you will not have the black-screen-in-calls issue with this ROM and your ambient display will work
Fixed low/inconsistent initial volume of ringtones and alarms (5.1 bug)
Clear all recent tasks
Battery % on status bar
Battery % on ambient display
Color battery text: white --> yellow --> red based on battery level (configurable - see post 2)
Ability to disable proximity sensor for those having black screen issues in calls on 5.1 ROMs (see post 2)
Ability to disable proximity sensor for ambient display (see post 2)
Native notification LED w/color support (solid or flashing - see post 2)
User configurable LED color priority: make your most important colors "stick" (see post 2)
Native LED can be turned off by modifying the last line in /system/build.prop (debug.nativeled=false)
Set your own LED blink rates (on/off times) in /data/meanpop.opt (see post 2)
Fast blinking blue LED for missed calls
Quick flash charging LED (red = charging, green = full, see post 2)
Ability to turn on/off LED notifications from the power menu (now you can sleep without the blinking and still see status when you turn notification LED back on)
Volume boost mod: thanks @scrosler
Reduced navigation height for more screen real estate (configurable: see top of post 2)
Adaptive brightness adjustments (brighter in bright light such as outdoor indirect sunlight)
Ambient notification - longer display time and slower fade-out
Ambient notification motion sensing improvements (display activates more consistently)
Ambient display lights once for each new notification instead of each notification reactivating the display several times over several minutes
Ambient display works indefinitely instead of stopping after 3 notifications
Ambient display shows time w/seconds and date
Fixed (stock) bug where ambient display can be up to several minutes slow
Double tap home for screenshot
Hold back button for screen off
Battery %
Battery green when charging, shows % while charging
Bonus ringtones, notifications, and alarms from other devices
Stock Android so no carrier bloatware (you'll have to install that yourself)
This is based on Google stock: so gapps already installed
More to come...
Changelog is in post #2
Problems?
Everything has been tested and is working based on initial tests. Since 5.1.0 is a new base, however, if you run into any problems, please just reply in this thread and I'll check into it.
Credit where credit is due:
As with any open source stuff, some of this work is my own and some comes from other sources. So in addition to my own work (mostly in the "mean" category), here's a quick thanks to those of you who contributed knowingly (thank you) and not-so-knowingly via open source 5 finger discount (thank you just the same: your stuff is good and that's why I used it). Sometimes it's not entirely obvious where the source started so if I missed someone, please let me know and I'll add you. Also, I'm careful to only include other work where the author does not specify any usage restrictions or has given approval. If you believe, however, that I've included something that shouldn't be in this ROM, please just PM me.
@scrosler: I started with your stock 5.1 LVY47H odex ROM, so thank you!
@scrosler for your help on the clear all recent tasks mod
Thanks @r4wOne for the MeanPop logo
Want my stuff?:
I list credits in the features section above and links to original works: if you see something credited there and you want to use it, click the link and seek permission from the developer I've credited. If you see something in this ROM and I don't reference some other source, I probably coded it myself. If you want it: take it and use it in your ROM, your theme, whatever you like. I just ask that you please credit me. I'm a firm believer in Android and open source so you don't even have to ask. Anything you see here... it's yours for just the price of a simple line crediting me. I always share as I believe that's the way we developers put the power in Android... and one way we can fight "the Apple brainwashing machine".
SECTION II: FLASHING NOTES
Below are some pointers on flashing before we get to the good stuff (installation and downloads).
Problems after you flash?:
PLEASE DO NOT REPORT PROBLEMS IN THIS THREAD UNTIL you've done a full wipe and fresh install to see if that cures it. I know I should really just do like most devs and proclaim REQUIRES FULL WIPE/FRESH INSTALL on every version. That saves me a lot of headaches but I know what a PITA a fresh install can be even with MyBackup or Titanium at your disposal. So it never hurts to try just a flash without a full wipe, but if you run into any HINT of a problem... anything at all... don't report the problem in this thread until you've tried a full wipe and fresh install first to see if that cures the problem!
Note regarding tweaks: don't flash tweaks or themes on top unless you KNOW the tweak/theme is compatible with the the 5.0.1 base
Flashing - a final note:
Use this ROM at your own risk as I won't be responsible for bricks or any other untoward happenings. I spent a lot of time ensuring that the stuff in this ROM is fast, smooth, and compatible. But... it always helps to have some familiarity with flashing ROMs to keep yourself safe. If you're starting from stock, be sure to familiarize yourself with the unlocking/rooting process (from other threads) before flashing this ROM.
SECTION III: INSTALLATION
Download links are below
Now to installation of the ROM itself...
Always make a backup before installing anything on your phone!
Make sure you already have the proper bootloader/radio installed: I recommend T-Mobile customers use @scrosler's LMY47M radio/bootloader (flashable ZIP) and everyone else use his LMY47E bootloader/radio (fastboot batch file).
On first install of MeanPop, do a full wipe (although if you are coming from a stock 5.0.1 or 5.1.0 base, you can try a dirty flash).
Subsequent updates: no wiping necessary BUT...
If you have any trouble at all, do a full wipe and then reinstall
Install using recovery (I use latest TWRP)
SECTION IV: DOWNLOAD
... you're gonna break it!
Don't flash any other mods, tweaks, or themes unless they specifically say they are built for (the latest version of) MeanPop or you WILL break features in this ROM and/or cause instability! While this ROM is designed to have the general look/feel of the stock ROM, it is highly customized under the hood and mods, tweaks, or themes not designed specifically for this ROM will cause problems. If you want this ROM to run perfectly without any issues, do not flash anything on top.
NEW releases (5.1.0):
Note: coming from MeanPop v1.x, v2.x (or any stock based 5.0.1 or 5.1.0 ROM for that matter): YES! You can dirty flash! But if you run into problems, please factory reset and install fresh before reporting issues.
Just remember to flash the 5.1 radio/firmware before flashing MeanPop v2.x.
Download from Android File Host
OLD releases (5.0.1):
Download from Android File Host
DONATIONS
Click to Donate
Donations are greatly appreciated! If you use this ROM as your daily driver, please consider contributing. This development takes time from my regular job so more contributions = more of my time.
Mike
OPTIONS AND CONFIGURING:
(scroll down for changelog)
Options (flashable ZIPs):
Look in your /data/MeanPop folder
stock-nav-bar.zip - flash this to restore stock navigation bar height
stock-proximity-5.1.zip - flash this if you have no trouble with the proximity sensor on 5.1 ROMs and you'd rather use the stock 5.1 proximity sensor code
CPU optimizations:
If you are running a custom kernel, I would recommend turning off the CPU optimizations. Open /data/meanpop.opt and set:
CPUOPT="false"
Color Battery Text
If you would rather have plain white battery text instead of the default color-level text, open /data/meanpop.opt and set:
BATTCOLOR="false"
Configuring the LED options:
Flashing notification LED and user configurable color priority is now available:
- Use Root Explorer or other root file explorer and open /data/meanpop.opt and edit parameters to your liking
- Set priorities so your more important LED colors stick and are not overwritten by lower priority colors
- Priority 9 will never overwrite priority 8, priority 8 will never overwrite priority 7, and so on
- Keep all priorities set to the default 9 if you don't care and always want to see the most recent notification color
- Default LEDBLINK mode is "auto" = LED will blink as long as there are not more (different) color notifications "underneath". If multiple color LED notifications exist, the LED goes solid.
- When LEDBLINK is set to "true", the LED always blinks
- When LEDBLINK is set to "false", the LED will always be solid
- You can open /data/meanpop.opt and change the blink rate (ON ms and OFF ms - see last two lines in that file)
- Don't go crazy with the blink rates: I recommend keeping the on and off periods at 500ms or higher
- New: LEDCHARGEMS controls how long the LED flashes when charging (red = charging, green = full). Set LEDCHARGEMS=0 to disable charging LED flash.
Notes on native LED... should you use it?:
The native notification LED built into this ROM needs a wake lock to run the LED, but only when the LED is actually on or blinking. Even with nativeled enabled, the phone will deep sleep as long as the LED is off but when the LED is on (solid or flashing), a wake lock is acquired and your phone will use slightly more battery. The difference in battery usage, however, is minimal and the fraction of extra battery used to run the LED is well worth the feature! Even with the LED on or blinking constantly, your phone will typically use only around 1% battery per hour with the screen off/idle.
If you don't plan to use the LED at all, I would recommend opening /data/meanpop.opt (you can do that with something like Root Explorer), and changing this line:
NATIVELED="false"
CHANGELOG
v2.15 released Apr 20
Added color battery text (configurable, see above) and reduced contrast "Android is starting..." dialog to reduce screen burn-in
v2.14 released Apr 13
Added ability to turn on/off notification LED from the power menu
v2.13 released Apr 11
Fixed LED so that it goes out after deleting or archiving an email from Gmail notification
Added volume boost mod: thanks @scrosler
v2.12 - pulled due to LED bug
v2.11 released Apr 6
Fixed low/inconsistent volume of ringtones and alarms (5.1 bug)
Fixed ability to turn off native LED (see above)
v2.10 released Apr 2
Rebased to LVY47H
v2.09 released Apr 1
Added ability to turn ambient display off when the phone is moved/picked up: long press power button and select "Ambient Pickup OFF"
Added ability to turn off CPU optimizations: useful when running custom kernels (see above for setup)
Built-in the proximity sensor fix
v2.08 released Mar 29
Added battery % to ambient display and replaced battery icon with battery % in status bar
v2.07 released Mar 28
Added quick flash LED for charging (see above for options)
Added ability to disable proximity sensor for ambient display (see above for options)
v2.06 released Mar 27
Fixed some minor issues with LED notifications and updated system apps to latest
v2.05 released Mar 25
Added ability to disable proximity sensor during calls for those having black screen issues (see above)
Updated some system libraries
v2.04 released Mar 24
Updated to LMY47M (all-carrier compatible) and updated all system apps
v2.03 released Mar 21
Added clear all recent tasks
Improved LED notifications so that the phone deep sleeps: wake lock is only used when the LED is actually on (solid or flashing)
Removed the second/small time display on the ambient display/lockscreen
Zipaligns all apk's and jar's
v2.02 released Mar 18
Update to LMY47E base
v2.01 released Mar 17
Added 4 way power/reboot menu
Reduced navigation bar height to increase screen real estate
Reduced home button lag
v2.0 released Mar 16
Upgrade to 5.1.0 base
v1.08 released Mar 8
Changed LED code to improve reliability
Added a flashable zip in /data/MeanPop to revert to solid signal bars
v1.07 released Mar 7
Improved clock on ambient display
Fast flashing blue LED for missed calls: never let a missed call go un-noticed!
v1.06 released Mar 5
LED notification reliability improvements
Ability to set blink rates (on/off times): see above
v1.05 released Mar 4
Ambient display shows time w/seconds and date
Fixed ambient display time lag bug (bug exists in stock ROM) where ambient display could show time up to several minutes slow
Improved native LED reliability
v1.04 released Mar 2
Fixed random blue notification LED that was popping up on rare occasions when another color LED is already lit
Improved the nativeled=false in build.prop for people who want their device to deep sleep and don't mind losing the LED (see above)
v1.03 released Mar 1
Fixed status bar signal meter transparency
Improved some boot parameters: should take care of any "storage space is running out" messages that a few people were seeing
v1.02 released Feb 28
Made changes to the native LED code to make it non-stock-kernel friendly
v1.01 released Feb 28
Ambient display lights once for each new notification instead of each notification reactivating the display several times over several minutes
Ambient display works indefinitely instead of stopping after 3 notifications
Fixed a bug that was causing long press back to sometimes not turn off the screen
v1.0 released Feb 27
LED blinking/solid options
LED color priority settings
Instant screen on (zero wake lag)
v0.3 released Feb 25
Improvements to native LED code
/data/meanpop.log that shows LED and screen on/off status messages
Updated superuser binaries
v0.2 released Feb 24
Native notification LED w/color support (solid only, no flashing)
Native LED can be turned off by modifying the last line in /system/build.prop (debug.nativeled=false)
Adaptive brightness adjustments (brighter in bright light such as outdoor indirect sunlight)
Ambient notification mods - longer display time and slower fade-out
Ambient notification motion sensing improvements (display activates more consistently)
Nice to see another option for stock based. I'll have to try it out.
Sent from my SinLess Shamu
Can you list exactly what your "performance tweaks and battery tweaks" are?
Hey I remember you.wasn't your ROM one of the more popular ROMs from the evo 3d?
Sent from my Nexus 6 using Tapatalk
mikeyxda said:
reserved
Click to expand...
Click to collapse
shizkoff777 said:
Hey I remember you.wasn't your ROM one of the more popular ROMs from the evo 3d?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Welcome to Nexus 6 Mikey! Fellow meanbean user from the EVO 4G LTE days.... Good times! Will be sure to Flash [emoji3] [emoji106]
antiochasylum said:
Can you list exactly what your "performance tweaks and battery tweaks" are?
Click to expand...
Click to collapse
Basically...
While screen is on:
- Stock 300Mhz - 2.6 Ghz CPU scaling
- Slightly lower than stock CPU up-threshold: 80%
While screen is off:
- Lowered 300Mhz - 1.6 Ghz CPU scaling
- Stock CPU up-threshold: 90%
Mike
shizkoff777 said:
Hey I remember you.wasn't your ROM one of the more popular ROMs from the evo 3d?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yeah. I started with the Evo 3D and then developed for the Evo 4G LTE and later the Samsung Galaxy Note 2. I'm on the Nexus 6 now: figured it was time for a true Android device.
Mike
With stock kernel right? Forced encryption?
Sent from my Nexus 6 using Tapatalk 2
mikeyxda said:
Yeah. I started with the Evo 3D and then developed for the Evo 4G LTE and later the Samsung Galaxy Note 2. I'm on the Nexus 6 now: figured it was time for a true Android device.
Mike
Click to expand...
Click to collapse
I remember you. I ran your Vzw note 2 rom on my note. It was a great rom. I'm gland to see you here.
janjan said:
With stock kernel right? Forced encryption?
Sent from my Nexus 6 using Tapatalk 2
Click to expand...
Click to collapse
Stock kernel, decrypted (not forced). I haven't played with decrypting my device though: mine is encrypted.
Mike
Changelog?
mikeyxda said:
Yeah. I started with the Evo 3D and then developed for the Evo 4G LTE and later the Samsung Galaxy Note 2. I'm on the Nexus 6 now: figured it was time for a true Android device.
Mike
Click to expand...
Click to collapse
Yeah i after the nexus 5 I didn't won't another HTC or Samsung device.well its good seeing you here
Sent from my Nexus 6 using Tapatalk
Mikey knows his stuff. I remember his killer rom on the VZW Note 2. Thanks for this rom, Mike!
Oh my god I haven't seen you since the early days of the note 2! You were the first dev I ever donated to. Wow this is awesome. I loved that status bar gradient you had
Clear All and Power Menu....?
Welcome Mikey! I ran nothing but MeanBean on my EVO4GLTE. Glad to see you made the move to Nexus device.
Mervingio said:
Clear All and Power Menu....?
Click to expand...
Click to collapse
Power menu is provided in the included Quick Boot app. I find that faster and easier than using the power button anyway (plus it saves your power button) but my intent is to not code stuff that already exists. That way I have time to do the stuff no one has done yet... and I don't have to redo it every time there is a base update.
As for clear all, I personally don't see any need for it: let the OS do what it does. But if lots of people want it, I can look into coding it.
Mike
Alright downloading this finally
Welcome to this awesome phone!! This ROM sounds promising from the other comments I've read, can't wait to flash it!
[NEW] aodNotify - Notification Light / LED for OnePlus 8 + No fingerprint burn in!
This app was initially developed for Samsung Galaxy devices with Always on Display. As OnePlus devices will also get an Always on Display soon i decided to create a version specially for OnePlus devices. For now the app runs in a compatibility mode as the Always on Display has not been released yet. App is in beta stage currently.
You need a notification light / LED for your OnePlus 8!
With aodNotify you can easily add a notification light / LED to your OnePlus 8!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your OnePlus 8 or OnePlus 7!
This app hides the fingerprint icon, so the icon can not burn in your screen! Enjoy your notification light!
MAIN FEATURES
• Notification light / LED for OnePlus 8 or OnePlus 7!
• Double tap to wake when notification arrives!
• Charging / Low battery light / LED
MORE FEATURES
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
BATTERY USAGE PER HOUR ~:
• LED - 7.5%
• LED & INTERVAL - 5.5%
• LED & ECO ANIMATION - 3.5%
• LED & ECO ANIMATION & INTERVAL - 2.5%
Without notification light the app consumes almost 0% battery!
DOWNLOAD:
DEVICES
• OnePlus 8
• OnePlus 7 (untested)??
• OnePlus 6 (untested)??
NOTES
• The app is still in beta stage, errors may occur!!
• OnePlus may block this app with future updates!
• Please check if the app is compatible before updating phone software!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"OnePlus" is a protected trademark of "One Plus Technology Co., Ltd"
Reserved
@Jawomo
Working good, glad to see you on the OP8, much appreciated.
Enjoy the coffee, you've earned it.
KOLIOSIS said:
@Jawomo
Working good, glad to see you on the OP8, much appreciated.
Enjoy the coffee, you've earned it.
Click to expand...
Click to collapse
Thanks! Is the position of the light around the camera ok? or did it need an fine adjustment in Notification light > Dimensions ?
Will add the offset to default if needed
Jawomo said:
Thanks! Is the position of the light around the camera ok? or did it need an fine adjustment in Notification light > Dimensions ?
Will add the offset to default if needed
Click to expand...
Click to collapse
The positioning is real close, good enough for me.
My screenshots don't show it, but, it is ever so slightly off-center, high at the 10:00 position.
Just a BTW/question :
I typically use the hide the cutout option in display settings.
In that mode, the ring light actually sits right below the camera cutout,resting atop the clock (clock still visible,an overlay by the ring).
Is this normal/limitation due to hiding the cutout?
To me, it's perfectly acceptable, it's not as if I'm not going to check my notifications, the app is doing its job, replacing the notification LED.
---------- Post added at 11:38 AM ---------- Previous post was at 11:23 AM ----------
@Jawomo
Tweaked the X/Y axis position on the camera ring:
X:4
Y:5
Left the size in X&Y as-is.
That puts it perfectly centered.
KOLIOSIS said:
The positioning is real close, good enough for me.
My screenshots don't show it, but, it is ever so slightly off-center, high at the 10:00 position.
Just a BTW/question :
I typically use the hide the cutout option in display settings.
In that mode, the ring light actually sits right below the camera cutout,resting atop the clock (clock still visible,an overlay by the ring).
Is this normal/limitation due to hiding the cutout?
To me, it's perfectly acceptable, it's not as if I'm not going to check my notifications, the app is doing its job, replacing the notification LED.
---------- Post added at 11:38 AM ---------- Previous post was at 11:23 AM ----------
@Jawomo
Tweaked the X/Y axis position on the camera ring:
X:4
Y:5
Left the size in X&Y as-is.
That puts it perfectly centered.
Click to expand...
Click to collapse
Will put the adjusted values in next beta. Thanks for testing!
Re the hide cutout option, will check if this can be optimized.
2.5% battery per hour is not too much consumption to show a notification led?
sakun-ice said:
2.5% battery per hour is not too much consumption to show a notification led?
Click to expand...
Click to collapse
As the LED is display on screen it consumes more energy like a single LED. But you wont let the light be active for hours, normally you check the device every hour at least.. so it wont consume that much battery.
But we can get some cool animations or fullscreen edge lighting, so for me its ok. When an AOD is released by OnePlus it will get lower hopefully.
Jawomo said:
As the LED is display on screen it consumes more energy like a single LED. But you wont let the light be active for hours, normally you check the device every hour at least.. so it wont consume that much battery.
But we can get some cool animations or fullscreen edge lighting, so for me its ok. When an AOD is released by OnePlus it will get lower hopefully.
Click to expand...
Click to collapse
I'm currently showing 1% usage & using the edge lighting option. (Using the default intelligent battery control setting for this app : Settings > Apps > aodNotify >Battery Optimization)
Definitely don't want to turn this thread into a battery life thread, but, just posting to show that it's not running down the battery in the background.
After the latest update I can't change offset position, only offset size.
diigiital said:
After the latest update I can't change offset position, only offset size.
Click to expand...
Click to collapse
Fixed! thanks!
Jawomo said:
Fixed! thanks!
Click to expand...
Click to collapse
Thanks, and I did buy you a coffee.:good:
diigiital said:
Thanks, and I did buy you a coffee.:good:
Click to expand...
Click to collapse
Thanks!
Does the camera cutout still need adjustment?
So glad you put this out for the OP8. Exactly what I was missing!! Thank you
Sent from my IN2017 using Tapatalk
Fyi, taking a little break for some days to recover. Please support each other as good as possible.
Thanks to all for contributing!
Will be back soon!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some times when receive call. Screen is off....
Does anyone have this problem?
I've just downloaded this to try it out. Is there a 'test' mode where I can see what it's going to look like? Nothing is shown on the screen at the moment. I'm running 10.5.7 (UK).
Alan
cascade128 said:
Some times when receive call. Screen is off....
Does anyone have this problem?
Click to expand...
Click to collapse
Slow unlocks after setting this up
narutosri said:
Slow unlocks after setting this up
Click to expand...
Click to collapse
I am getting this issue. Also one touch wake isn't working while app is running. I need to double tap, then use fingerprint sensor to unlock.
5stars said:
I am getting this issue. Also one touch wake isn't working while app is running. I need to double tap, then use fingerprint sensor to unlock.
Click to expand...
Click to collapse
Yep even I am facing the issue.....uninstalled the app for now although I loved it that I bought the premium. I will install it again after this is resolved.
Download now from Google Play Store! And if you like, please leave a rating.
This is the original battery indicator around punch hole cameras, Energy Ring. All variants of the App is now merged into this one 'Universal Edition', future device supports shall only be available through this App.
If you have a device with punch hole camera, reach out via email to get support added!
Similar Apps for other Devices:
Energy Bar
Energy Bar Curved Edition for S8/S9/S10/+
Energy Bar Curved Edition for Note 8/9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Adds a configurable Energy Ring around the camera lens indicating current Battery level. Dive into the various configuration options, not only you can quickly glance and get the battery info but, Energy Ring adds an accent to your phone's camera lens.
Got a full charge? The Ring will be a 360 degree wrap around the front camera lens.
Battery depleting? So will the arc of Energy Ring.
Out of the box features:-
✓ Energy Ring can be configured from a width of 1 pixel to a donut thick ring
✓ Energy Ring puts almost 0% load on CPU, as it wakes up only to reflect any change in battery level
✓ Energy Ring's direction can be configured as clockwise/bidirectional/anti-clockwise
✓ Energy Ring can hide on fullscreen content (apps, videos, images, games etc)
✓ Energy Ring can be configured to change colors automatically depending on the live battery level
✓ Energy Ring could have a mono color/multiple color segments/gradient (pro)
✓ You can literally assign any color in the world for your favorite configuration
✓ Energy Ring has a number of cool animations whenever a power source is plugged into your device
All that is cool! But what about Energy Ring consuming Battery?!
This is one of the most exciting question for me to answer. Energy Ring more than anything understands that you need to utilize your battery efficiently (after all, that's why you installed the App, right? .) Energy Ring sits on the screen silently putting almost 0% load on CPU, if battery level changes, Android wakes up Energy Ring. Once awake, Energy Ring quickly updates itself and goes back to sleep. And to be that extra efficient, the Ring goes on deep sleep when you turn off the screen, meaning it doesn't even read changes in battery level when the screen is off.
Accessibility Service Requirement:
Android requires Energy Ring to run as an Accessibility Service, to be able to display on Lock Screen. It does not read/monitor any data, whatsoever. This is especially useful for people who have disability to read numbers and work better with visual data.
Download now from Google Play Store! And if you like, please leave a rating.
Already using it. Great feature!!! Loving it.
Thank you so much!!
jagan2 said:
Download now from Google Play Store! And if you like, please leave a rating.
This is the original battery indicator around punch hole cameras, Energy Ring. All variants of the App is now merged into this one 'Universal Edition', future device supports shall only be available through this App.
If you have a device with punch hole camera, reach out via email to get support added!
Similar Apps for other Devices:
Energy Bar
Energy Bar Curved Edition for S8/S9/S10/+
Energy Bar Curved Edition for Note 8/9
Adds a configurable Energy Ring around the camera lens indicating current Battery level. Dive into the various configuration options, not only you can quickly glance and get the battery info but, Energy Ring adds an accent to your phone's camera lens.
Got a full charge? The Ring will be a 360 degree wrap around the front camera lens.
Battery depleting? So will the arc of Energy Ring.
Out of the box features:-
✓ Energy Ring can be configured from a width of 1 pixel to a donut thick ring
✓ Energy Ring puts almost 0% load on CPU, as it wakes up only to reflect any change in battery level
✓ Energy Ring's direction can be configured as clockwise/bidirectional/anti-clockwise
✓ Energy Ring can hide on fullscreen content (apps, videos, images, games etc)
✓ Energy Ring can be configured to change colors automatically depending on the live battery level
✓ Energy Ring could have a mono color/multiple color segments/gradient (pro)
✓ You can literally assign any color in the world for your favorite configuration
✓ Energy Ring has a number of cool animations whenever a power source is plugged into your device
View attachment 5202019
View attachment 5202021
All that is cool! But what about Energy Ring consuming Battery?!
This is one of the most exciting question for me to answer. Energy Ring more than anything understands that you need to utilize your battery efficiently (after all, that's why you installed the App, right? .) Energy Ring sits on the screen silently putting almost 0% load on CPU, if battery level changes, Android wakes up Energy Ring. Once awake, Energy Ring quickly updates itself and goes back to sleep. And to be that extra efficient, the Ring goes on deep sleep when you turn off the screen, meaning it doesn't even read changes in battery level when the screen is off.
Accessibility Service Requirement:
Android requires Energy Ring to run as an Accessibility Service, to be able to display on Lock Screen. It does not read/monitor any data, whatsoever. This is especially useful for people who have disability to read numbers and work better with visual data.
Download now from Google Play Store! And if you like, please leave a rating.
Click to expand...
Click to collapse
Found out about this app today and I absolutely LOVE it! I left a 5 star in the google play store for you
Just one quick question, what does transparent background do? I have checked and unchecked it and went through some of my apps but I can't tell what it does...
Been using this for a few months now on my 4a works like a charm. Make sure you kill battery optimization or it'll get killed by the system trying to save power. It uses next to no CPU/resources. Def. a 5 star app. Setting up the power levels for each color can be a little tricky...no big deal tho.
I like it! Thanks for putting in the time to make this work on so many devices.
Is there a way to remove the native Android battery indicator from the notification bar?
RaceFaceXC said:
I like it! Thanks for putting in the time to make this work on so many devices.
Is there a way to remove the native Android battery indicator from the notification bar?
Click to expand...
Click to collapse
there is! go Settings -> System -> System UI Tuner -> Status bar -> Battery and select "Don't show this icon". a really nice look, imo.
now if we could only get rid of the bottom bar too...
c_tho said:
there is! go Settings -> System -> System UI Tuner -> Status bar -> Battery and select "Don't show this icon". a really nice look, imo.
View attachment 5370799
now if we could only get rid of the bottom bar too...
Click to expand...
Click to collapse
Excellent! Thanks
I spoke too soon. I'm using Android 12 beta on this device and those settings don't exists (anywhere I can find, anyway) on this os version.
RaceFaceXC said:
I spoke too soon. I'm using Android 12 beta on this device and those settings don't exists (anywhere I can find, anyway) on this os version.
Click to expand...
Click to collapse
oh yeah i think it's hidden by default and the method to unhide it has varied over the years. there are a couple different ways on android 12 by the looks (i'm on beta 3) but imo the easiest is just to install this guy:
System UI Tuner - Apps on Google Play
Shortcut to the hidden System UI Tuner tool in Android 9 and newer.
play.google.com
that will just direct you straight to the menu.
c_tho said:
oh yeah i think it's hidden by default and the method to unhide it has varied over the years. there are a couple different ways on android 12 by the looks (i'm on beta 3) but imo the easiest is just to install this guy:
System UI Tuner - Apps on Google Play
Shortcut to the hidden System UI Tuner tool in Android 9 and newer.
play.google.com
that will just direct you straight to the menu.
Click to expand...
Click to collapse
Excellent. Thank you again
I have a 4a running custom ROM (dirty unicorn), it's telling me my device isn't compatible. Do you have a link to download outside of play store so I can try it out?
Assuming it works on custom ROM.
A quick google and ta daa!
Energy Ring - Universal Edition! ER_UNI_1.6 (2 Variants)
Download Energy Ring - Universal Edition! ER_UNI_1.6 Free Android Apps,
a2zapk.com
works great, thank you.
Great app! Is there a setting to show Energy Ring on the screen when it s!eeps, soI can see the phone is charging when screen is otherwise dark?
Update: Fixed the issue of System turning off Accessibility Service of Energy Ring frequently, it was a Android System Level bug, a workaround has been deployed successfully, let me know if Energy Ring is stable again for you! P.S. I am flooded with emails and messages, apologies if I couldn't reply all!
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
LMODroid is an AOSP-based mobile OS aiming to ease transition to de-googled(*) Android use-cases, while also supporting using Google services. Additionally, we want to make everyday experience better with useful features
The term de-googled is complicated, as AOSP by itself is by Google. We aim to reduce Google's data collection on mobile devices and make active efforts to remove contacts to Google servers and document more regarding this topic, but we value application compatibility over total Google avoidance.
Features:
Code:
UI/UX:
- Blur control
- Transparent control
Network & internet
- Control connected devices to hotspot (disconnect/backlist)
- eSIM support
- VPN tethring
Display:
- Lockscreen media art
- Pocket detection
- Customizable Wallpaper & style
- OSS Desktopmode
Sounds & vibration:
- In-call vibration
- Dual SIM rington
- Per-app volume control
Security:
- Enforcing selinux
- Encrypted storage
- OSS Face Unlock
- 3x3 / 4x4 / 5x5 / 6x6 pattern size
- Scramble pin layout
- QS toggle on lockscreen
- App lock
- Auto reboot
- Restrict USB
- Emergancy Panic trigger
Applications:
- Game Space
- Transistent task mode
- Parallel Space
Buttons:
- Taskbar toggle
- Invert layout
- Force navigation bar enabler
- Edge long swipe actions
- Advanced restart
- Power menu styles
- Long press button to enable torch
- Volume button control playback
- Volume panel on left
- Partial screenshot
Statusbar:
- QS quick pull down
- Network traffic monitor
- System icons tuner
- Old style signal icons
- Wi-Fi standart Icons
- Clock position
- Show seconds
- Auto hide
- AM/PM style
- Battery style
- QS Auto brightness toggle
- Data usage
Changelogs:
https://get.libremobileos.com/changes
Download:
https://get.libremobileos.com/devices/surya/builds
Notice:
- Recommended firmware is latest stable firmware
- No custom kernels and custom modules are supported. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Screenshots:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation:
Download *.img files from download section and install them from fastboot.
example:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash super super_empty.img
After installed all .img files reboot to recovery and follow these steps:
Factory reset:
- format data/cache/system
Apply update -> Apply from ADB:
Code:
adb sideload LMODroid-*-RELEASE-surya.zip
Useful links:
Web: https://libremobileos.com/
Download: https://get.libremobileos.com/
Gerrit:
https://gerrit.libremobileos.com/
Jenkins: https://jenkins.libremobileos.com/
Git: https://git.libremobileos.com/LMODroid
Git devices: https://git.libremobileos.com/LMODroid-Devices
Github(mirror): https://github.com/LMODroid
Github devices(mirror): https://github.com/LMODroid-Devices
Telegram discussion group: https://t.me/LMODroid_Discussion
wow! looks promising! pretty nice features and settings.
one very important question for me.
are the bluetooth hi-res audio capabilities supported on this rom? (aptx aptxHD, LDAC)
Excellent, was waiting for a XDA thread for this!
Which camera does it come with?
Which GCam is it compatible with?
Any GCam version + config recommendations?
Download link not working?
greekfragma said:
wow! looks promising! pretty nice features and settings.
one very important question for me.
are the bluetooth hi-res audio capabilities supported on this rom? (aptx aptxHD, LDAC)
Click to expand...
Click to collapse
aac aptx aptxhd ldac offload are supported
Master One said:
Excellent, was waiting for a XDA thread for this!
Which camera does it come with?
Which GCam is it compatible with?
Any GCam version + config recommendations?
Click to expand...
Click to collapse
Aperture (Official LineageOS camera)
We don't support others camera and take care about stock camera app only but others should be work fine.
You can try others and let us know
Master One said:
Download link not working?
Click to expand...
Click to collapse
It's working
iKeramat said:
Aperture (Official LineageOS camera) We don't support others camera and take care about stock camera app only but others should be work fine. You can try others and let us know
Click to expand...
Click to collapse
This turns out to be tricky, which is why I hope that someone with more time at hands can have a look and report back here.
From the LOS thread:
Camera Notes
ANX camera is not recomended and will most probably NOT work.
To get a fully working camera try one of the gcams here.
Do not forget to copy&load the associated xml file!
Official LOS uses oss camera service, so xml written for other custom roms might not work.
The gcams at the above link have modified xmls for LOS.
Click to expand...
Click to collapse
So far I have tried my previous favorite (NGCam v7.4.104-v2.0) that I have in use on ArrowOS 11 (last version with MIUI vendor), but it crashes as was to be expected due to the camera service as mentioned above.
I have also tried UltraCVM (v8.1 from the link above and v8.4.300.10u_ucvm from the GCam Hub) which worked with the provided config file, but unfortunately it does not seem to support a 3rd party gallery, I could not find out how to change camera lenses, and at one point while playing around with it, it just crashed.
So in the end I really would like to have a camera app that supports slow motion and time lapse video, 3rd party gallery, all the available lenses and runs stable.
Master One said:
This turns out to be tricky, which is why I hope that someone with more time at hands can have a look and report back here.
From the LOS thread:
So far I have tried my previous favorite (NGCam v7.4.104-v2.0) that I have in use on ArrowOS 11 (last version with MIUI vendor), but it crashes as was to be expected due to the camera service as mentioned above.
I have also tried UltraCVM (v8.1 from the link above and v8.4.300.10u_ucvm from the GCam Hub) which worked with the provided config file, but unfortunately it does not seem to support a 3rd party gallery, I could not find out how to change camera lenses, and at one point while playing around with it, it just crashed.
So in the end I really would like to have a camera app that supports slow motion and time lapse video, 3rd party gallery, all the available lenses and runs stable.
Click to expand...
Click to collapse
Actually with aperture all of sensors will work
iKeramat said:
Actually with aperture all of sensors will work
Click to expand...
Click to collapse
Just read up on Aperture, and indeed makes sense and needs to be supported, but still, it does not have slow motion and time lapse video and I'm not sure about the use of lenses:
Support for auxiliary cameras (this has to be enabled outside of the Aperture app)
Click to expand...
Click to collapse
Not sure what that means and if this has been enabled for the two additional lenses that we have on the POCO X3 NFC. I guess this should be the selector that reads ".9 | .9 | 1" in the middle of the lower part of this screenshot:
But unfortunately this is not working as the lens selection (main, macro and wide angle) obviously isn't correctly configured (though there are no UI options for that):
The "1" seems to be the main lens, which is working.
The middle ".9" is not working at all (makes the picture freeze and something crashes, because also the UI keeps working, the camera picture does not recover), so this must be an invalid camera ID.
The left ".9" looks like main lens in black & white, so that's also an invalid camera ID because that lens is not supposed to be used on its own, but does its job in conjunction with the main camera for more depth (or something like that).
So the camera ID configuration needs to be corrected and the UI needs a proper camera labeling (so that you can see which of the three selectors is which lens).
There is also a picture of the settings menu, which looks differently from the one we have:
We don't have the photo stabilization and the the lower two video stabilization options.
Hello all. do we have any feedback from this rom if anyone is using it? I would like to test it probably next weekend so I would appreciate anyone that has some experience till now.
greekfragma said:
Hello all. do we have any feedback from this rom if anyone is using it? I would like to test it probably next weekend so I would appreciate anyone that has some experience till now.
Click to expand...
Click to collapse
All good except the camera issue. Aperture is just not good enough, though of course it makes sense as it's OSS. Haven't found the time to play with various Gcam versions and have been testing crDroid in the meantime (though that one is not to stay as the next version will be rebased to LOS as well and requires a clean flash).
Master One said:
All good except the camera issue. Aperture is just not good enough, though of course it makes sense as it's OSS. Haven't found the time to play with various Gcam versions and have been testing crDroid in the meantime (though that one is not to stay as the next version will be rebased to LOS as well and requires a clean flash).
Click to expand...
Click to collapse
Is the photo quality really bad with this Aperture camera app?
AngusYoung14 said:
Is the photo quality really bad with this Aperture camera app?
Click to expand...
Click to collapse
YES!
SmartJuwel said:
YES!
Click to expand...
Click to collapse
Thanks!
Is there another camera app that suports 3rd party gallery?