Hi Xda members, I edited the touchpad.cfg file because i wanted to remove the water protection.. so when the phone started again the screen became totally unresponsive, i wanted to make a wipe but when i go to Android recovery shows an error saying "Failed to boot 2", is there a way to wipe the phone with all this problems? also i wanted to replace the file with the old one with adb or Android commander but the phone is not recognized on the pc because is pattern locked..
disjes said:
Hi Xda members, I edited the touchpad.cfg file because i wanted to remove the water protection.. so when the phone started again the screen became totally unresponsive, i wanted to make a wipe but when i go to Android recovery shows an error saying "Failed to boot 2", is there a way to wipe the phone with all this problems? also i wanted to replace the file with the old one with adb or Android commander but the phone is not recognized on the pc because is pattern locked..
Click to expand...
Click to collapse
Try using fastboot/adb to replace the touchpad.cfg file with a backup file, then reboot. If you're not sure how to use that try searching the forums or Google it. I really hope you have a copy of the original as that is the fastest way to replace that file and reboot. Hopefully that fixes your issue.
KillerKellerjr said:
Try using fastboot/adb to replace the touchpad.cfg file with a backup file, then reboot. If you're not sure how to use that try searching the forums or Google it. I really hope you have a copy of the original as that is the fastest way to replace that file and reboot. Hopefully that fixes your issue.
Click to expand...
Click to collapse
Hi KillerKellerjr, i've got a problem with fastboot, when i select fastboot it gets stucked in starting fastboot protocol support and adb does not recognize it.. drivers are already installed..
Related
Sup guys, im really desesperate, today i rooted mi motorola xt316 spice key, so i deleted some apps for a better performance, but now the screen is black, i can view the notificaction bar and the lock screen but its all, what can i do? i searched for one rom and i found nothing, do u guys have a rom or something? ohh and i already do a hard reset.. still the same, please help
What apps had you deleted?
Sent from my Nexus S using xda premium
well i dont remember exactly, but i deleted ones of motorola, u know the widget time, and others. i dont remeber exacly, damn:s
Black screen.. I think you have deleted the launcher
Sent from my Nexus S using xda premium
any suggestion?:S
Is your phone set up with an android market account? I've actually had this problem before and what you do is just install a launcher from the android market and it automatically installs on your phone and it should work perfectly. I still recommend you should reinstall the apps you lost because if you factory reset your phone it will be just as you described. hope it helps!
No , i cant login in with my account, i reset the phone with the factory reset, and when i turn it on, i cant connect with the google servers.
Have someone text you a link to the apk of a launcher, when you get the notification click the download link and when it finished downloading select the download from the notification bar. It'll prompt you to install. If you don't have unknown sources checked then it'll ask you to turn that option on. Once you have a launcher installed then your phone will function properly (depending on what you removed) until you can get the stock rom flashed.
Our you can go straight to the flashing part. Find a rom - stock if you'd like - and flash it. There should be some kind of stock flasher available if there aren't any roms, like an RUU or something... I think RUUs are only for HTC devices, but there should be something similar for your device.
If your phone has a subforum here on XDA, check there for stock or custom roms.
Supersonic Evo 4G | MIUI | Tapatalk
thanks for the response, i have a question; the launcher can be installed via adb?, im gonna try your solution first.
Well I tried the message metod and I apparently delete the default browser, so I tried to install pro launcher via adb but the cmd command says offline device, i think is because the usb debugging is off?, i cant activate it because the screen is black:S
Just flash your rom via Odin. It safer and easy
Odin? what is that? its compatible with the motolola spice key xt316? thanks for the response.
The problem is i cant put my phone in usb debugging because the screen is black, is there another method?
boot ur phone in recovery mode,
this does not need usb-debugging to be On,
and u can use adb...
worth to try
thanks dude im gonna try now.
I put my phone in recovery mode, and i plug the phone to my pc,but when i type adb devices, it doesnt appear.
in the recovery mode there is this options:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache
download nb0 from sd card
when i tried to install using the adb install comand it says error: device not found
henry225 said:
I put my phone in recovery mode, and i plug the phone to my pc,but when i type adb devices, it doesnt appear.
in the recovery mode there is this options:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache
download nb0 from sd card
when i tried to install using the adb install comand it says error: device not found
Click to expand...
Click to collapse
ya i think i know why
its the USB drivers for hboot
u need to install drivers for the phone (hboot drivers)
so the machine recognize the phone when plugged
--- or ---
u can get the apk and pack it as an update.zip file (google this to find out how)
then use the option (apply update from sd card)
i think this will install the apk
stinger1 said:
ya i think i know why
its the USB drivers for hboot
u need to install drivers for the phone (hboot drivers)
so the machine recognize the phone when plugged
--- or ---
u can get the apk and pack it as an update.zip file (google this to find out how)
then use the option (apply update from sd card)
i think this will install the apk
Click to expand...
Click to collapse
When i plug my phone on normal mode the comand adb devices recognize the phone but it say offline, but when i plug the phone on recovery mode dont. There is drivers for the recovery mode?, sorrty ima huge noob.
Ok i gogole it and i found a video,http://www.youtube.com/watch?v=FXDszE0Ytn8, but my question is the hboot drivers are the same for all androids? or i need find for my spce xt316.
henry225 said:
Ok i gogole it and i found a video,http://www.youtube.com/watch?v=FXDszE0Ytn8, but my question is the hboot drivers are the same for all androids? or i need find for my spce xt316.
Click to expand...
Click to collapse
i think there is some kind of types/drivers
not 100% related to manufacturer
i mean a driver may work even if its for another manufacturer
anyways try the drivers in ur hand (if u have any)
or try to find "google usb drivers" online somewhere
if failed...
check this list and try to get the proper drivers
http://developer.android.com/sdk/oem-usb.html
Ok, here is the straigth... Accidentally stupidly noobly i delete /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?)
So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
Is there any help here?
Problem SOLVED
xdanoobs said:
Ok, here is the straigth... Accidentally stupidly noobly i delete /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?)
So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
Is there any help here?
Click to expand...
Click to collapse
Problem SOLVED
SPECIAL THANKS TO "sliper123" @ HERE
Hello,
I have a Allview Speed City tablet, and after i installed root on it, i changed the dpi using an app..
(root thanks to mad_ady, root availible at http://forum.xda-developers.com/showthread.php?p=40740061#post40740061 )
After this, the tablet is stuck in a boot loop.
I tried to do a factory reset from recovery mode, but this didn't solved the problem.
(the tablet has only 2 buttons, power and home. The recovery can be accessed pressing and holding both buttons until the recovery boot).
I located the file where the dpi is changing, /system/build.prop , and tried to flash another file from Onda 701 ROM (a very similar tablet). I didn't managed to find the original file. Anyway, the flashing didn't succeeded, "instalation aborted" appeared on the screen.
I found on some forum a flashable zip with build.prop from another device, and i replaced the build.prop file with the one from Onda ROM, signed it with a tiny program and still fails.
What options do i have to replace/edit the build.prop file? Before bricking, the ADB was not turned on on the tablet, and i read that i cannot use the SDK (anyway don't know how to use it). I contacted Allview and they don't want to give me the ROM from the tablet. And so, i call anybody that can give me a backed up rom from the tablet, anyone who have the knowledge about AD ROMS and are willing to help me..
Thanks folks!
I installed ADB on my pc and tried to pull the build.system file from /system on tablet, but i get error:closed.. I tried to run this command with tablet in recovery/ apply update from ADB.. Why do i get this error? the device cannot recieve other commands than adb sideload?
Thanks..
this worked for me for full reset
crististan said:
I installed ADB on my pc and tried to pull the build.system file from /system on tablet, but i get error:closed.. I tried to run this command with tablet in recovery/ apply update from ADB.. Why do i get this error? the device cannot recieve other commands than adb sideload?
Thanks..
Click to expand...
Click to collapse
this has been done with the allview speed city
I had a simular problem...
here my solution, hold on and home button at the same time until the screen gets back
wait until you get the boot screen...
use both, 1. erase card and 2. media options...
then to be save I choosed the other option say something like for factory reset.
the I used the apply update from ADB...
the tablet shows the same screen for 5 or 6 minutes
after it booted normaly, but I still had some problems
and I used a needle for a reset...
after that the tablet worked fine
the only thing what I dont understand is why its still root
Thank you for this tutorial, but i solved my problem with warranty. Even so, i erased all cache, factory reset from recovery but still i had no access to system files, and factory reset didn't changed the build.prop (system settings) to defaults.
It's normal. build.prop is part of /system (and the su binary is installed under /system as well), and any changes you make to /system files are permanent until you flash a different firmware.
Hi everyone, I have a problem. I recently got a Huawei y220 and rooted it and enabled USB debugging, tweaked the SystemUI.apk and it all went good, I had no problem rebooting. I also changed my bootscren with BootScreen from the Play Store.
But today, my phone got stucked in bootloop, and i know why, I changed the /system/fonts permissions to 666, and also when I was trying to change the default font (DroidSans.tttf and DroidSansBold.ttf) copied a font file, so in that folder there was some permissions changed and an extra font. I had to to do something so i locked my phone. When I returned a couple of minutes later the phone was like off, so i removed the battery and rebooted it. It got stucked on my bootscreen, and didn't showed me my ADW launcher.
I can't install CWM as there is no file for this model (because it's very new), I can't flash anything as far as I know. Tried downloading the official "upgrade" from Huawei, copied the file, but I can't seem to enter the "Software Upgrade Mode", (VOL UP + VOL DOWN + POWER KEY), I press those keys for about a minute and nothing happens.
I know my phone isn't fully bricked, for now, so, how can I change those file permissions through my PC or Linux?
I can enter the bootloader screen BTW.
I also tried AromaFM, but i get a signature error.
I've already wiped/factory reset and wiped cache.
Thanks for your time!
--
TheEdwardRC
I thought the way you update / restore the stock firmware was by the update.app method? The update should be in an archive and once you unpack it should be a folder named : dload with the update.app in it. That whole folder should go on the root of the SD card so it should read /sdcard/dload. Unless it is a different y220...
Otherwise, you're kinda screwed because unless you have adb access when it is bootlooping (rare), there won't be much to do. You won't have adb in recovery either since it is still stock.
I guess it is the normal y220. The problem is that I can't get into the Software Upgrade Mode. Also, my other choice was AromaFM but i don't know how to stop it to verify the signature verification. If i could do that, i could have root acces to the files. Or maybe could install a POSSIBLE backup that i found online...
Well, when i am in recovery the device is detected on windows, but ot mounted...
Thank you
My point was, according to the info that I found, you don't update that one via the Software Update mode, you do it via the method I was talking about with the update.app in the dload folder on the SD card.
Huawei Ascend Y220 U00
After installing a theme pack, my huawei Y220 has been stuck in bootloop. I found a toolkit on some forum, it requires my device mounted on a Computer, I got all necessary drivers, but the pc could not install my device. It shows the device on device manager on the PC but after 3sec it ejects. Pls I need help.
look here, this will help you unbrick your device
http://en.club.vmall.com/forum.php?mod=viewthread&tid=13433&highlight=unbrick+huawei
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
SubwayChamp said:
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
Click to expand...
Click to collapse
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Jackevolution said:
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Click to expand...
Click to collapse
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Jackevolution said:
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
Click to expand...
Click to collapse
SubwayChamp said:
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Click to expand...
Click to collapse
Already done, now semms to be stuck on the same loading screen, baibe he installing apps? It taking sooo long...
i think this isn't working. It's just 20 minute that phone is stuck on "Mi" screen...
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Jackevolution said:
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Click to expand...
Click to collapse
Yes, you can reflash again the rom, put the rom zip in your adb folder and short the name as you can, and flash it using adb sideload, to do this tap on "advanced option" and then "adb sideload" in recovery menu and in adb terminal in your pc type adb sideload nameofrom.zip where nameofrom is te name of the rom, don´t forget the extension .zip as I wrote. TWRP will load the zip and flash it again and then you can flash Magisk to root device.
If you can´t see storage of device in your pc is cause it´s encrypted but you can perform adb sideload anyway
Jackevolution said:
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
Click to expand...
Click to collapse
Look at the error you got every time "Can not find flash_all.bat" its mean that you are selecting invalid path, okay so here is correct method to flash via fast-boot method:
Download the latest fast boot rom zip one option is http://bigota.d.miui.com/V9.5.12.0....FA_20180525.0000.00_7.1_global_343bc5aaef.tgz
Unzip .tgz using winrar and the zip will be extracted in folder named as vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 inside this folder there will be another folder named same.
Open Mi Flash tool and click to select direct to folder vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 open the folder and then open the other folder click Ok (don't open the the images folder)
Connect your redmi 5 plus in fast boot mode and click refresh, then choose clean all and click Flash