{XMP} Possible bricked?... help! - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

After using flashtool to upgrade to ICS (Generic CE2 World from here), I heard that it was then best to use SEUS to force an install/repair in order for it to run as quickly as possible.
This started to work and then half way through just failed. So I tried again and it just failed.
The phone then wouldn't turn on.
So figured I'd re-flash using flashtool and start again - only this got 1/2 way through and also failed with the message:
18/059/2013 09:59:32 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
Now when the phone turns on a get a warning triangle and a picture of a phone....
What's the next step!?

teapea said:
After using flashtool to upgrade to ICS (Generic CE2 World from here), I heard that it was then best to use SEUS to force an install/repair in order for it to run as quickly as possible.
This started to work and then half way through just failed. So I tried again and it just failed.
The phone then wouldn't turn on.
So figured I'd re-flash using flashtool and start again - only this got 1/2 way through and also failed with the message:
18/059/2013 09:59:32 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
Now when the phone turns on a get a warning triangle and a picture of a phone....
What's the next step!?
Click to expand...
Click to collapse
Phone model ? Did your pc has your phone's driver installed ?

Xperia Mini Pro
All drivers installed - used the same PC and Flashtool to do the initial flash yesterday.
Then repair by SEUS failed - which is when the problems started.
Now SEUS fails and so does flashtool - using exactly the same file/setup as yesterday.
I've downloaded a stock GB firmware instead but get another error instead now, that it can't read the headers.
hmmm

teapea said:
Xperia Mini Pro
All drivers installed - used the same PC and Flashtool to do the initial flash yesterday.
Then repair by SEUS failed - which is when the problems started.
Now SEUS fails and so does flashtool - using exactly the same file/setup as yesterday.
I've downloaded a stock GB firmware instead but get another error instead now, that it can't read the headers.
hmmm
Click to expand...
Click to collapse
Are you sure you chose the .ftf for your device? If yes, try checking "no final verification" before reflashing
Sent from my Nexus 4 running Android 4.2.2

mihahn said:
Are you sure you chose the .ftf for your device? If yes, try checking "no final verification" before reflashing
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
yes yes and yes
But still getting errors I'm afraid.
Also I've not installed the whole thing on another machine and the same problems - so it looks like it's phone related.

hey bro
remember when you unlock your booloader you cant use anymore SEUS i read something like that before iam not sure. i suppose that reason show you error.
if not try with another pc.
you can install another kernel? try it for example extended stock and flash stock ics if dont like you custom roms. :good:

teapea said:
After using flashtool to upgrade to ICS (Generic CE2 World from here), I heard that it was then best to use SEUS to force an install/repair in order for it to run as quickly as possible.
This started to work and then half way through just failed. So I tried again and it just failed.
The phone then wouldn't turn on.
So figured I'd re-flash using flashtool and start again - only this got 1/2 way through and also failed with the message:
18/059/2013 09:59:32 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
Now when the phone turns on a get a warning triangle and a picture of a phone....
What's the next step!?
Click to expand...
Click to collapse
try flashing ftf via flashtool

Related

SEUS cannot repair phone

didnt see anything on this so i started a new topic...
but my x10 is haveing issues so i tried to repair via SE PC Companion, but the repair function doesnt seem to work, as i get... "An error has occurred and the phone software update was aborted"
and with the SEUS Update i get ... "The installation failed"
ive also tried flashtool, but the flashing of FW 435 fails @ amss_fs.sin stage..
Did i actually end up bricking the phone and have to send it for warranty?
unless i am missing something... any help would be appreciated
Flash with flashtool 0.2.8 and one stock rom, for example most recent, 2.0.1.b.1, my x10 brick yesterday too, I flash by this way.. regards..
sent by miui x10i with lockscreen sense 3.0!!
flowserver said:
Flash with flashtool 0.2.8 and one stock rom, for example most recent, 2.0.1.b.1, my x10 brick yesterday too, I flash by this way.. regards..
sent by miui x10i with lockscreen sense 3.0!!
Click to expand...
Click to collapse
i used flashtool 0.2.91 , and the most recent FW too, the b.1 and still have the same issue @ the amss_fs.sin step
I had this problem once and I fixed it by flashing only the baseband back to the the phone
Stephen3672 said:
I had this problem once and I fixed it by flashing only the baseband back to the the phone
Click to expand...
Click to collapse
hmm tried that too, but the amss_fs.sin file is still required on the baseband flash... aigoo~
Did u try flashing baseband on flashtool 0.2.8 . Were u
using a custom Rom before I had the same problem when I use jrepal 7.0.1 Rom when try seus my phone
would get the error and was stocked at se logo
Stephen3672 said:
Did u try flashing baseband on flashtool 0.2.8 . Were u
using a custom Rom before I had the same problem when I use jrepal 7.0.1 Rom when try seus my phone
would get the error and was stocked at se logo
Click to expand...
Click to collapse
yeah i tried flashtool 0.2.8 and still have same issue with the amss_fs.sin file..
try to flash the kernel.sin only from flashtool 0.2.91
Since today (I just realised it today so maybe since couple of days ago) the repair button doesn't even appair for me in the SEUS.
No repair in my seus. it just say I have newest software.
are SE black listning phones whit custom ROM ?
I have a similar problem, phone just wont turn on. SEUS doesnt give me a repair option. Then flashtool always gives me error and then aborts. And when i leave the battery out for at least 24 hours, then plug charger into phone w/o battery, then put battery in 10mins later, it starts up. goes straight to Xrecovery. Reboot and it turns on. but eventually it just turns off again to the point i cant turn it on again. so frustrating. I really think the phone is done for...

[Q] X10 Being weird

Hi everyone!
So I was trying to update my X10 from a CM7 mod to M&M`S MiUI 2.3.9, but when I tried to flash the kernel necessary for it, Flashtool wouldn't install it due to an error (12/055/2012 14:55:06 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed").
I didn't think anything of it, and decided to try installing the ROM anyways because I'm retarded. Now my phone won't get past the Sony Ericsson logo when booted, I can't flash anything with Flashtool because it just comes up with that error again, and PC Companion and Update Service won't repair it.
ANY and ALL help will be appreciated. Thank you!
Do u not meed to unlock bootloader for that Rom?
Sent from my X10 using XDA
Yeah, I didn't really read through everything. xD
Again, I'm retarded.
But is there any way of fixing this?
I would try this first.....in case youve not been using properly before.
http://forum.xda-developers.com/showpost.php?p=23521989&postcount=14
I did that, and it tells me that there is no software available for my phone yet.
So you are doing everything exactly as it says in the guide,and your saying that when you connect the phone in step 8,it hits you with no new software available.
Im asking because
1.Its always worked for me(about 10 times without any problem)
2.People connect their phone too early when using pc companion
If it doesnt help,you can try an earlier version of flashtool
I did it step by step and I'm using version 0.6.7.0 right now because I can't find any links to the newest version. :/

SEUS An Unexpected error has occurred!

I was checking update, since I am still on 4.0.3 & SEUS return with Unexpected error
well, I install the SEUS application to another PC, and got the same error, I didn't connect my phone to PC. its just SEUS error.
Search on google, some peoples complain about it since 2010 at Sony support forum, but nobody replied them.
and it's weird ....
same problem , i dont know what's the matter ?
me too, I need to reinstall my phone now, wtf should I do now
It was Sony Servers, causing the problem, & Now its Gone
Same Here
Me too got the same error
Does anyone know how to fix this?! bcoz of this error i can't unbrick my device with SEUS :crying::crying:
Emry said:
Does anyone know how to fix this?! bcoz of this error i can't unbrick my device with SEUS :crying::crying:
Click to expand...
Click to collapse
you can Flash your phone using Flash tool. no need to use SUES
thanks but I tried it with no success,. i get this error : Sin header verification failed. and the flashing process stops

[RESOLVED] Please help, I think I bricked my Z3v when trying to update with flashtool

So, I tried using flashtool for the first time today with my xperia z3v (verizon version). I wanted to update it to the fairly recently leaked lollipop rom (verizon is still on kitkat).
Anyways, I think what happened is that I forgot to turn on usb debugging before flashing the FTF. And now my phone is stuck saying: "the software update failed. Make sure that your phone is connected to the computer and try again."
I've tried reflashing multiple times to no avail. I've tried factory resetting by holding the volume down and power button but that won't work. And Sony PC companion won't pick up the device at all either. Can anyone help me get my phone working again? Maybe I should try flashing a different version? I've been googling for the last 4 hours trying to solve this so any input would be greatly appreciated!!
**EDIT: Nevermind I figured it out here is what I did when I had trouble with flashtool:
Quote:
Originally Posted by fixmewireless
I tired update Z3v with Flashtool to latest version and phone got soft bricked. I downloaded ftr file from server and flashed with flashtool. flashing process went thru, but phone shows message "software update failed".
Only error message I had during flash is ERROR - Error parsing TA file. Skipping
I noticed that flashtool does not have fsc preinstalled for D6708 (z3v). Did that cause the problem?
Can anybody upload fsc for z3v?
thanks
I actually ran into this same exact problem. After I had it soft bricked as you stated, I opened back up flash tool and when to set up the flash, and inside the flashtool I checked every box under Wipe, Also check all boxes under Exclude, EXCEPT SYSTEM. Leave SYSTEM un checked! Check everything under MiscTA Exclude too. I Then ran Flash and let it do its thing until it prompt me to plug in device into flashmode. It the ran the flash successfully and rebooted my device. I then followed the rest of the steps from page one and was able to root the device with no problems. Hope this helps!
If you hold volume down, and plug the usb into the pc, does the updating message appear?
zackdadams said:
If you hold volume down, and plug the usb into the pc, does the updating message appear?
Click to expand...
Click to collapse
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
actionjaxon77 said:
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
Click to expand...
Click to collapse
It's cusrious you are geting the error parsing TA file. You have a verizon phone so you must be bootloader locked. Were you roted before? Maybe just corrupt FTF file, try downloading it again or try to convert the SIN files to ext4 within flashtool and see if you can read everything correctly with ext4explore.
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
zackdadams said:
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
Click to expand...
Click to collapse
Thanks for the help, I was able to successfully flash it using the info I pasted in my edit to the original post!

Update failed and my sisters'Xperia X is now bricked

Hello,
My sister accepted the update 3 days ago and it failed. She had an error message with the android logo.
I tried PC companion but received an error from this app. I used flash tools from Androxyde with 2 different ftf but received everytime the same error :
04/005/2017 14:05:08 - ERROR - Processing of modem.sin finished with errors.
04/005/2017 14:05:08 - INFO - Flashing finished.
04/005/2017 14:05:08 - INFO - Please unplug and start your phone
04/005/2017 14:05:08 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
Now if I power on the phone, I have this error message in red : your devive has failed verification and may not work properly.
I need help !!!
Make sure you are flashing the correct firmware for the device, It should still be recoverable at this point.
Is it solved already? I am having the same problem
EDIT: it's ok now. i just reflashed it.
Use a another firmware
One question, where do you find the Driver for flashtool?
I choose every option but the program still ask for drivers
realthrash said:
Use a another firmware
One question, where do you find the Driver for flashtool?
I choose every option but the program still ask for drivers
Click to expand...
Click to collapse
hello look in C:\flashtool\driver after install flashtool only !!! :RÉ

Categories

Resources