Any custom kernel for Omega Rom 45.1? - Galaxy S III Q&A, Help & Troubleshooting

Hi guys, i tried to search for a kernel that supports STweaks in order to increase my charging speed on Omega Rom 45.1 Android 4.2.2 but i couldnt find any, i could use a little help!
Thanks in advance!:good:

Pereman said:
Hi guys, i tried to search for a kernel that supports STweaks in order to increase my charging speed on Omega Rom 45.1 Android 4.2.2 but i couldnt find any, i could use a little help!
Thanks in advance!:good:
Click to expand...
Click to collapse
4.2.2 is a leak. This means there is no kernel source available (since Samsung only release code after official releases). No source means no custom kernels.

rootSU said:
4.2.2 is a leak. This means there is no kernel source available (since Samsung only release code after official releases). No source means no custom kernels.
Click to expand...
Click to collapse
Thank you for your fast response! but isn't there any way to increase the mAh in this version?

Pereman said:
Thank you for your fast response! but isn't there any way to increase the mAh in this version?
Click to expand...
Click to collapse
It's controlled by the kernel and you cannot have a custom kernel, so no.

Related

[Q] OTG at Mwakious3Drom® AOSP 3.5

Hello.
I have a question:
Is there any posibilities that Mwakious3Drom® Aosp 3.5 support OTG.
I ask this because he use modified ButteredToasT kernel, and this kernel in its original form support OTG
irumora said:
Hello.
I have a question:
Is there any posibilities that Mwakious3Drom® Aosp 3.5 support OTG.
I ask this because he use modified ButteredToasT kernel, and this kernel in its original form support OTG
Click to expand...
Click to collapse
You can always tlash "normal" Buttertoast and give it a go
Yes but Mwak said that he uses modified version of kernel so i dont want to flash another kernel.
Is there anyone who knows is this rom support OTG
irumora said:
Yes but Mwak said that he uses modified version of kernel so i dont want to flash another kernel.
Is there anyone who knows is this rom support OTG
Click to expand...
Click to collapse
I flashed another kernel, OCed it ti1566MHz, and it works perfect! Phone is much faster than with Mwaks stock kernel, no reboots, no glitches, my battery is running 1day, 13 hours moderate use and I still have around 20% left. So, it´s totaly up to you which kernel you are going to use. Try flashing few kernels and see which one works best for your needs
Excuse me but can i know which kernel do you use
irumora said:
Excuse me but can i know which kernel do you use
Click to expand...
Click to collapse
The one that cannot be mentioned on xda

[Q] Bootloop with perseus kernel [SOLVED]

Hi guys,
I am newbie, my S3 i9300 is using temasek 10.1 rom and his amazing lastest kernel. About batterylife saving, I am trying to find out the ASV version of my S3 to get right value for stweak app by flashing perseus kernel together with flashing unchecksetonboot.zip as manual but I faced the bootloop, my S3 could not started. I have tried the ways (only flash perseus kernel (36.3) or flash perseus kernel together with flashing unchecksetonboot.zip) but it was not booted. I do not know how to solve this.
I could not post my question in Temasek's thread because i am newbie. Is there someone else like me and any help for me, please!
I hope Temasek can see my question.
Thanks a lot!
vinhtq79 said:
Hi guys,
I am newbie, my S3 i9300 is using temasek 10.1 rom and his amazing lastest kernel. About batterylife saving, I am trying to find out the ASV version of my S3 to get right value for stweak app by flashing perseus kernel together with flashing unchecksetonboot.zip as manual but I faced the bootloop, my S3 could not started. I have tried the ways (only flash perseus kernel (36.3) or flash perseus kernel together with flashing unchecksetonboot.zip) but it was not booted. I do not know how to solve this.
I could not post my question in Temasek's thread because i am newbie. Is there someone else like me and any help for me, please!
I hope Temasek can see my question.
Thanks a lot!
Click to expand...
Click to collapse
TL;DR: before flashing aside from known issues in the second post.
This isn't an AOSP kernel. I won't work with CM and AOSP derivatives.
DOESN'T WORK ON SAMSUNG JELLYBEAN 4.2.1 ROMS.
JustArchi said:
TL;DR: before flashing aside from known issues in the second post.
This isn't an AOSP kernel. I won't work with CM and AOSP derivatives.
DOESN'T WORK ON SAMSUNG JELLYBEAN 4.2.1 ROMS.
Click to expand...
Click to collapse
It is my BAD.
I have read this but till do not know why, I do know that temasek's rom is an CM derivative. Perseus kernel is not AOSP kernel. So could you guys teach me what ROM (AOKP rom but not CM) I have to flash to be compatible with perseus kernel? i am confused
Sorry for my BAD.
vinhtq79 said:
It is my BAD.
I have read this but till do not know why, I do know that temasek's rom is an CM derivative. Perseus kernel is not AOSP kernel. So could you guys teach me what ROM (AOKP rom but not CM) I have to flash to be compatible with perseus kernel? i am confused
Sorry for my BAD.
Click to expand...
Click to collapse
All Samsung (or Sammy) derivatives that means all Rom with XX... in its name, MC3, etc. And 4.1.x only. See thread's titles it's written there.
Striatum_bdr said:
All Samsung (or Sammy) derivatives that means all Rom with XX... in its name, MC3, etc. And 4.1.x only. See thread's titles it's written there.
Click to expand...
Click to collapse
You open my mind! I am too stupid to think that Sammy ROM derivatives is AOSP, My BAD.
Even I do not really understand about AOSP ROM because of this words " The name is often co-opted for custom ROMs that are very close to the original AOSP, from What's the difference between an AOSP ROM and a stock ROM?"
But as you teach me, I will chose a Sammy ROM derivatives without the AOSP note in ROM.
Iam downloading a [ROM][MC3][JKAY] Purelook HD v5.0 I SGS 4 + Xperia Z ROM. Hope it works.
I will try to improve my self step by step.
Thank you! :highfive:
vinhtq79 said:
You open my mind! I am too stupid to think that Sammy ROM derivatives is AOSP, My BAD.
Even I am not really understand about AOSP ROM because of this words " The name is often co-opted for custom ROMs that are very close to the original AOSP, from What's the difference between an AOSP ROM and a stock ROM?"
But as you teach me, I will chose a Sammy ROM derivatives without the AOSP note in ROM.
Iam downloading a [ROM][MC3][JKAY] Purelook HD v5.0 I SGS 4 + Xperia Z ROM. Hope it works.
I will try to improve my self step by step.
Thank you! :highfive:
Click to expand...
Click to collapse
There are 2 main kind of roms - based on samsung sources and based on aosp sources (cyanogenmod). They're not compatible with each other, that means kernels, mods, themes etc.
Most AOSP Roms have 4.2.2 Android while Sammy have 4.1.2.
JustArchi said:
There are 2 main kind of roms - based on samsung sources and based on aosp sources (cyanogenmod). They're not compatible with each other, that means kernels, mods, themes etc.
Most AOSP Roms have 4.2.2 Android while Sammy have 4.1.2.
Click to expand...
Click to collapse
After few affords with help, i found that my S3's ASV version is 06. I am happy now and continue to learn more about tweak for performance and battery. Thanks pro!

AOSP ROM, 4.2.2 Kernels??

I've just flashed (for the first time) an AOSP ROM, running Android 4.2.2.
It plays up with games and other things so i was looking to try different Kernels.
Locating alternative Kernels for this type of ROM and this android version is proving more difficult than other ROMs.
Can someone please help me by suggesting other kernels that would work on Android 4.2.2 on an AOSP ROM?
Thank you in advance :good:
((The ROM i've flashed is LiquidSmooth))
AndyGalaxy said:
I've just flashed (for the first time) an AOSP ROM, running Android 4.2.2.
It plays up with games and other things so i was looking to try different Kernels.
Locating alternative Kernels for this type of ROM and this android version is proving more difficult than other ROMs.
Can someone please help me by suggesting other kernels that would work on Android 4.2.2 on an AOSP ROM?
Thank you in advance :good:
((The ROM i've flashed is LiquidSmooth))
Click to expand...
Click to collapse
Siyah
Devil
Yank
Googy-Max
Temasek
rootSU said:
Siyah
Devil
Yank
Googy-Max
Temasek
Click to expand...
Click to collapse
Thanks for the quick response..
But do these kernels work both with AOSP ROMs AND Android 4.2.2??
Because, for example, Siyah has noted on their download page that this is for Android 4.1.x ROMs ONLY and that "Samsung 4.2 leaks are not supported",
rootSU said:
Siyah
Devil
Yank
Googy-Max
Temasek
Click to expand...
Click to collapse
Says the same for "Googy-Max" kernel on their XDA page:
"This kernel is ONLY for SAMSUNG 4.1.2 ROMS"
AndyGalaxy said:
Thanks for the quick response..
But do these kernels work both with AOSP ROMs AND Android 4.2.2??
Because, for example, Siyah has noted on their download page that this is for Android 4.1.x ROMs ONLY and that "Samsung 4.2 leaks are not supported",
Click to expand...
Click to collapse
Siyah and Googy work on AOSP and Samsung ROMS
They work with AOSP 4.2.2 but only up to 4.1.2 on samsung
The reason being Samsung have not released the sources for Samsung 4.2.2, so we cannot make kernels for that
rootSU said:
Siyah and Googy work on AOSP and Samsung ROMS
They work with AOSP 4.2.2 but only up to 4.1.2 on samsung
The reason being Samsung have not released the sources for Samsung 4.2.2, so we cannot make kernels for that
Click to expand...
Click to collapse
Okay, brilliant, thanks.
I will give Siyah a go as i had and liked Siyah on my previous ROM.
Thanks again.. :good:

i9300 4.3 slow charging

i was running android 4.1.1 rooted with adam kernel i installed adam kernel to ignore unstable charging power now i updated my phone to 4.3 samsung stock update (I9300XXUGMJ9) and i cant find any supported kernel the current with stock kernel and a new oem charger and new oem cable is 200 ma when i enable ignore stable power on 4.1.1 i got 1000 ma as normal.. i wonder if i can compile my own kernel to get ignore unstable power for 4.3 since there is no support for 4.3 or what to do to fix the main prop. of the phone
4.3 kernels you will have to wait .
Kernel sources are out for 4.3 if you want to build a kernel .
Search for 4.3 kernel sources post .
JJEgan said:
4.3 kernels you will have to wait .
Kernel sources are out for 4.3 if you want to build a kernel .
Search for 4.3 kernel sources post .
Click to expand...
Click to collapse
thanx for replay
i will download the source
i will need help to modify it it is the first time to do :/
andrewsamy said:
thanx for replay
i will download the source
i will need help to modify it it is the first time to do :/
Click to expand...
Click to collapse
You are taking on a task that is beyond you ???
JJEgan said:
You are taking on a task that is beyond you ???
Click to expand...
Click to collapse
these is the first time to modifiy a kernel so i need a lot of research :/
Good luck
Sent from my GT-I9300 using XDA Premium 4 mobile app

[Q] Any custom kernels support RR KK 4.4.2?

Hi all.
Does anyone know if the new RR KK 4.4.2 supports any custom kernels like Dorimanx?
Feel like I'm searching in vain on the forums regarding this ROM and kernel support :/
Thanks
Husum182 said:
Hi all.
Does anyone know if the new RR KK 4.4.2 supports any custom kernels like Dorimanx?
Feel like I'm searching in vain on the forums regarding this ROM and kernel support :/
Thanks
Click to expand...
Click to collapse
You can try Apollo kernel
Jeetu said:
You can try Apollo kernel
Click to expand...
Click to collapse
I will try this out when I have time. Maybe I should just wait until there is an official message regarding support on RR KK Rom for other kernels.
Thank you

Categories

Resources