anyone know if there is a custom overclock kernel that can be use with the new AtrICS ROM?
gbmaster137 said:
anyone know if there is a custom overclock kernel that can be use with the new AtrICS ROM?
Click to expand...
Click to collapse
No and there likely won't be one until there is source code released. Also, they are busy working out the bugs/issues still.
thanks...
Does anyone know if the Mac Kernel Linaro -03 works on the Paranoid Android 2.52 ROM by lens?
try it , find out and share result.
If you are referring about Mac sense then no it won't work with pa jb. Mac Aosp does but your camera will not work. So I suggest the butteredtoast RSL 12 kernel.
Jsparta26 said:
If you are referring about Mac sense then no it won't work with pa jb. Mac Aosp does but your camera will not work. So I suggest the butteredtoast RSL 12 kernel.
Click to expand...
Click to collapse
OK thank, I will try that kernel then
Jsparta26 said:
If you are referring about Mac sense then no it won't work with pa jb. Mac Aosp does but your camera will not work. So I suggest the butteredtoast RSL 12 kernel.
Click to expand...
Click to collapse
I tried the butteredtoast kernel but it cause the camera not to work also I tried using both camera drivers but the aosp ones caused a no boot scenario.
The camera already works without a different kernel flashed. The buttertoast kernel I know for a fact works with the camera because I am using it now. Have you tried doing a full wipe and reflashing the rom?
Jsparta26 said:
The camera already works without a different kernel flashed. The buttertoast kernel I know for a fact works with the camera because I am using it now. Have you tried doing a full wipe and reflashing the rom?
Click to expand...
Click to collapse
Yes I did do a full wipe and installed a nandroid backup, but I'll just wait for the next update to the ROM as lens stated that he's including the buttered toast kernel.
Hi any body knows which Rom support OTG mode ?
shahnowaz said:
Hi any body knows which Rom support OTG mode ?
Click to expand...
Click to collapse
I think CM10 does. But you can confirm that.
Most CM10 based roms have the required kernel support for it, but I could never get it working properly, I don't think it is capable hardware-wise.
steamdnt said:
Most CM10 based roms have the required kernel support for it, but I could never get it working properly, I don't think it is capable hardware-wise.
Click to expand...
Click to collapse
Do you think a Y-cable would make a difference?
No just checked CM10 build ,it wont detect.
shahnowaz said:
Hi any body knows which Rom support OTG mode ?
Click to expand...
Click to collapse
None for amaze
Hi guys, i tried to search for a kernel that supports STweaks in order to increase my charging speed on Omega Rom 45.1 Android 4.2.2 but i couldnt find any, i could use a little help!
Thanks in advance!:good:
Pereman said:
Hi guys, i tried to search for a kernel that supports STweaks in order to increase my charging speed on Omega Rom 45.1 Android 4.2.2 but i couldnt find any, i could use a little help!
Thanks in advance!:good:
Click to expand...
Click to collapse
4.2.2 is a leak. This means there is no kernel source available (since Samsung only release code after official releases). No source means no custom kernels.
rootSU said:
4.2.2 is a leak. This means there is no kernel source available (since Samsung only release code after official releases). No source means no custom kernels.
Click to expand...
Click to collapse
Thank you for your fast response! but isn't there any way to increase the mAh in this version?
Pereman said:
Thank you for your fast response! but isn't there any way to increase the mAh in this version?
Click to expand...
Click to collapse
It's controlled by the kernel and you cannot have a custom kernel, so no.
Here is a kernel for stock Cyanogen OS13.x/13.0/12.1 with hardboot support (To use the stock Rom as primary Rom in Multirom)
Code:
Use my kernel only if you are sure about the risks of flashing custom Roms/Kernel to your device. I'm is not responsible for any damage caused by using one of my files.
I have attached 2 file types.
The .img files to flash it with fastboot or an kernel flasher app.
The .zip files to flash it with a custom recovery
The COS13.0 ZNH0EAS26M kernel will also work on COS13.0 ZNH0EAS2JK
The COS13.1.1 ZNH2KAS2X1 kernel will also work on COS13.1.2 ZNH2KAS3P0
Sources:
https://github.com/bauner/android_kernel_oneplus_msm8974
thank you so much :victory::victory::victory:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
900 something views and 2 comments...! very supportive pple in this forum nowadays.. cant get even a referance.
Great Kernel mod. Thanks... Confirmed working on my 1+1 64GB. Flashed multiboot and used flashify to update TWRP.. great work.. Thanks again.
NOW ME PHONE RUNNING THE PASINO AND THE SOKP.. MUSIC WHEN AND HOW I WANT IT>
comexx said:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
Click to expand...
Click to collapse
The kernel in this thread is for cos12.1 YOG4P only!
It will not work with cos12 or cm11s
@bauner do you intend to develop this kernel any further? i like it
maxed4901 said:
@bauner do you intend to develop this kernel any further? i like it
Click to expand...
Click to collapse
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
yes it definitely is working well.. thanks though and look forward to future builds.:good:
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Hello?
Sent from my A0001 using Tapatalk
Pls provide kernel for latest OTA with multirom support
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Dusha999 said:
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Click to expand...
Click to collapse
Phate00 said:
Pls provide kernel for latest OTA with multirom support
Click to expand...
Click to collapse
maxed4901 said:
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Click to expand...
Click to collapse
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
bauner said:
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
Click to expand...
Click to collapse
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
maxed4901 said:
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
Click to expand...
Click to collapse
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
bauner said:
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
Click to expand...
Click to collapse
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thx for the info.
I will check it soon
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
There are a few changes in the init scripts.
I have attached a new version for YOG4PAS3JL in the first post
Thanks for super duper fast update...