Well I got this device from a great friend of mine @DowntownJeffBrown. Its a T-Mobile Vibrant (US). Now I'm using it in India.
It came to me with a CM10.1 ( thanks to my friend there ). My previous phone was a tiny Galaxy Y. It had just GB and no ICS. We just got CM7 a month back. After using that... the transaction is a bit difficult. (I just got the phone yesterday though ).
My questions are just basic noob ones but reading through guides here..most of them are solved. I still have some thus the thread. Well let me start.
As I have CM10.1 now... If I have to change the ROM...do I HAVE to flash froyo? And after the Odin... can i directly flash the ROM.zip or do I have to install a kernel or flash a CM7 or a CM9 or a CM10 before proceeding?
Can I get a temporary CWM or is it available only with kernels?
ROM zips come with an included kernel? If then... Can I flash them directly from froyo?
I read in one guide that I'll have to flash the SAME Rom.zip twice (after a reboot ). Is it necessary? And can someone explain why that is important?
Can I flash the modems? I saw that the modems listed are for US ONLY. Well the phone was from the US but right now its half way around the world...will it work?
What is the necessity of a bootloader?
I appreciate every help I get
Sent from my SGH-T959 using Tapatalk 4 Beta
TeeJay!! said:
Well I got this device from a great friend of mine @DowntownJeffBrown. Its a T-Mobile Vibrant (US). Now I'm using it in India.
It came to me with a CM10.1 ( thanks to my friend there ). My previous phone was a tiny Galaxy Y. It had just GB and no ICS. We just got CM7 a month back. After using that... the transaction is a bit difficult. (I just got the phone yesterday though ).
My questions are just basic noob ones but reading through guides here..most of them are solved. I still have some thus the thread. Well let me start.
As I have CM10.1 now... If I have to change the ROM...do I HAVE to flash froyo? And after the Odin... can i directly flash the ROM.zip or do I have to install a kernel or flash a CM7 or a CM9 or a CM10 before proceeding?
Can I get a temporary CWM or is it available only with kernels?
ROM zips come with an included kernel? If then... Can I flash them directly from froyo?
I read in one guide that I'll have to flash the SAME Rom.zip twice (after a reboot ). Is it necessary? And can someone explain why that is important?
Can I flash the modems? I saw that the modems listed are for US ONLY. Well the phone was from the US but right now its half way around the world...will it work?
What is the necessity of a bootloader?
I appreciate every help I get
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi,
Q: As I have CM10.1 now... If I have to change the ROM...do I HAVE to flash froyo? And after the Odin... can i directly flash the ROM.zip or do I have to install a kernel or flash a CM7 or a CM9 or a CM10 before proceeding?
A: NO. you can flash ROM without flashing froyo (go back to stock before flashing a new ROM). You can directly flash through CWM the ROM.zip
Q:Can I get a temporary CWM or is it available only with kernels?
A:There are two options here. Choose which is best for you, before you start.
ROOT ONLY METHOD:
A – This is an update.zip (633KB) that roots your phone only. You can then install Rom Manager from the Market to flash CWR (Clockwork Recovery) and install custom ROMs.
INSTALL CLOCKWORK RECOVERY AND FLASH A ROM THAT WILL GIVE ROOT ACCESS (MY PREFERRED METHOD):
B – use the other update.zip (1.7MB) and this will flash CWR for you – allowing you to immediately flash a custom ROM.. I do this because it's faster.
source: ★★★ NOOB GUIDE :: Root :: Odin :: Files :: Guides ★★★
Q:ROM zips come with an included kernel? If then... Can I flash them directly from froyo?
A: withing a ROM the kernel is also included. But It can be changed later by flashing a different appropriate kernel. YES, you can directly flash from froyo without any issue.
Q:I read in one guide that I'll have to flash the SAME Rom.zip twice (after a reboot ). Is it necessary? And can someone explain why that is important?
A: Yes it is needed sometimes when you get a boot loop after flashing a new ROM b/c to update the recovery.
Q:Can I flash the modems? I saw that the modems listed are for US ONLY. Well the phone was from the US but right now its half way around the world...will it work?
A:YES. you can flash modems. Only thing matters is choose a modem based on your OS (ICS/JB/CM7 etc)
Q:What is the necessity of a bootloader?
A:Bootloaders were introduced for solve recovery and rainbow issues on Gingerbread ROMs.
When we got Gingerbread ROMs, we also faced the issue of not being able to see the Recovery on the GB Kernels and having to see our screens go funny which were safely called Rainbows! Well, no more !!
Click to expand...
Click to collapse
I prefer Bootloaders b/c it gives better key combination
more info: [BOOTLOADERS]CUSTOM Gingerbread Bootloaders for Vibrant
Hope this answers your questions
Great!
Let me clear myself...
1. I don't need to flash froyo every time I want to flash a new ROM. Even if I'm on any ROM(GB or ICS or JB )
I just boot boot into recovery >wipe data and system and Mount everything back flash my new Rom and done? And oh... Flash the zip again.
( how do I know when I have to flash it twice?? )
And about bootloaders... Do I HAVE to flash them? Can I do stuff without them? ( i never had to deal with it before )
And...
Since the phone is a US phone... Which firmware do I chose? US or Indian (if any is available that is )
Sent from my SGH-T959 using Tapatalk 4 Beta
http://forum.xda-developers.com/showthread.php?p=31060223
This?
Sent from my SGH-T959 using Tapatalk 4 Beta
TeeJay!! said:
Great!
Let me clear myself...
1. I don't need to flash froyo every time I want to flash a new ROM. Even if I'm on any ROM(GB or ICS or JB )
I just boot boot into recovery >wipe data and system and Mount everything back flash my new Rom and done? And oh... Flash the zip again.
( how do I know when I have to flash it twice?? )
And about bootloaders... Do I HAVE to flash them? Can I do stuff without them? ( i never had to deal with it before )
And...
Since the phone is a US phone... Which firmware do I chose? US or Indian (if any is available that is )
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Bootloaders are unlocked so that u can flash things like new radio's. So if u are only going to flash roms and kernels u will never have to worry about the bootloader.
I'm pretty sure that radio's are universal as in there is no Indian radio and USA radio. There is just vibrant radio's that work all around the world universally. But I may be wrong this because it's been so long since I used the vibrant.
As far as flashing a new Rom you should just have to reboot into recovery, wipe data and system, then just be able to flash a new Rom. I'm not quit sure why that one Rom u showed me tells u to flash it twice. But again it's been so long since I used the vibrant that I'm not sure. I can tell you this when I flashed cm10.1 on it before I sent it to u I just use these steps
Reboot recovery
Wipe data/system/caches
Flash Rom
Flash gapps
Reboot
But let some of these guys clarify it for u because they are the experts on this phone at this point not me.
Cheers brother
We see you meow on our nexus⁴ can we haz some more?
Radio = modem right? And thanks man! Appreciate it
Sent from my SGH-T959 using Tapatalk 4 Beta
TeeJay!! said:
Radio = modem right? And thanks man! Appreciate it
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Correct :thumbup:
And no problem brother you know I got your back
We see you meow on our nexus⁴ can we haz some more?
TeeJay!! said:
Great!
Let me clear myself...
1. I don't need to flash froyo every time I want to flash a new ROM. Even if I'm on any ROM(GB or ICS or JB )
I just boot boot into recovery >wipe data and system and Mount everything back flash my new Rom and done? And oh... Flash the zip again.
( how do I know when I have to flash it twice?? )
And about bootloaders... Do I HAVE to flash them? Can I do stuff without them? ( i never had to deal with it before )
And...
Since the phone is a US phone... Which firmware do I chose? US or Indian (if any is available that is )
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Q: 1. I don't need to flash froyo every time I want to flash a new ROM. Even if I'm on any ROM(GB or ICS or JB )
I just boot boot into recovery >wipe data and system and Mount everything back flash my new Rom and done?
A: Yes. you don't need to flash froyo (which means ODIN back to stock) prior flashing a ROM. You can simply boot into recovery and do a FULL wipe (data/system, cache, dalvik) and if needed format the system under mounts (please refer the installation guide provided with the ROM ). Also re-flashing the ROM depends. It will not happen all time. BUT if it has to be done it is inserted in the OP. Further If the 1st boot after flashing ROM is unsuccessful don't panic and do a battery pull and re-flash the ROM.zip b/c sometimes recovery needs to updated
Q:And about bootloaders... Do I HAVE to flash them? Can I do stuff without them?
A: No. its not essential to flash bootloaders. You can proceed without them.
Q:Since the phone is a US phone... Which firmware do I chose? US or Indian
A: You can use any firmware (I think you are referring to radio/modem) which supports vibrant and the OS you are running. Modems are not based on location BUT the results depends on various locations.
more information: Modem Info *Must See*
tc
OK... Kinda got it all the way Thanks Haarsh and Jeff
Just one thing for now...
The last part... The firmware is the PDA CSC and modem thing we flash right? At least that walhat was for me before ( galaxy Y ). We had to flash back to the stock firmware every time we needed to flash a different ROM. It used to be region specific and kept updating... But here its just the froyo one right? I having been to the part if downloading it for now...
Sent from my SGH-T959 using Tapatalk 4 Beta
TeeJay!! said:
OK... Kinda got it all the way Thanks Haarsh and Jeff
Just one thing for now...
The last part... The firmware is the PDA CSC and modem thing we flash right? At least that walhat was for me before ( galaxy Y ). We had to flash back to the stock firmware every time we needed to flash a different ROM. It used to be region specific and kept updating... But here its just the froyo one right? I having been to the part if downloading it for now...
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes. PDA and PIT are used when going back to stock using odin. This link shows [GUIDE] How to Restore or Recover Your Samsung Vibrant using those files.
A Samsung Galaxy S ROM has a few parts :
kernel -> includes the linux kernel, which is the core of the Android OS, drivers to communicate with the hardware. Froyo includes Linux 2.6.32. Gingerbread is 2.6.35.
PDA -> most of the stuff, android and samsung applications, ringtones, etc.
Modem (or phone) -> the radio firmware. Without this you have 0 communication with the cell tower.
CSC -> customisation for a particular provider or country
The PDA can also include the kernel (zImage file)
source: http://forum.xda-developers.com/showthread.php?p=13922405
Click to expand...
Click to collapse
I don't get what you meant by But here its just the froyo one right?
haarsh said:
Yes. PDA and PIT are used when going back to stock using odin. This link shows [GUIDE] How to Restore or Recover Your Samsung Vibrant using those files.
I don't get what you meant by But here its just the froyo one right?
Click to expand...
Click to collapse
Thanks for that link!
I meant in my old phone... There were three files ( PDA , CSC and modem ) that we had to put in Odin while flashing but here its just one file ( froyo stock image I guess ) in the PDA slot. And also the pit file ofcourse!
Sent from my SGH-T959 using Tapatalk 4 Beta
And when (if I ) flash a fresh stock ROM... Does my internal memory( the second bar in the pic) get cleaned up? Just the system partition is cleaned right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-T959 using Tapatalk 4 Beta
TeeJay!! said:
Great!
Let me clear myself...
1. I don't need to flash froyo every time I want to flash a new ROM. Even if I'm on any ROM(GB or ICS or JB )
I just boot boot into recovery >wipe data and system and Mount everything back flash my new Rom and done? And oh... Flash the zip again.
( how do I know when I have to flash it twice?? )
And about bootloaders... Do I HAVE to flash them? Can I do stuff without them? ( i never had to deal with it before )
And...
Since the phone is a US phone... Which firmware do I chose? US or Indian (if any is available that is )
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Just to maybe save you some trouble in the future.......
Froyo is 2.2 and stock for the vibrant is Eclair 2.1, you can find froyo odin images but that is not stock.
With the vibrant you can flash roms without needing to go to stock everytime if the os is the same or if you are upgrading, never downgrade through recovery mode.
You only have to flash back to stock (or froyo) if you plan to downgrade, for example you are on jelly bean 4.2 and want to try gingerbread 2.3.
The only time you should have to flash twice is when you are upgrading, for example you are on 2.2 froyo and want to try jelly bean 4.2, recovery is updated with first flash then second flash installs the rom.
Everything else has been answered by haarsh in deatail, refer to his posts.
Sent from my SGH-T959 using Tapatalk 2
TeeJay!! said:
And when (if I ) flash a fresh stock ROM... Does my internal memory( the second bar in the pic) get cleaned up? Just the system partition is cleaned right?
Sent from my SGH-T959 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Perfectly understood sir
Just this last question (quoted )
TeeJay!! said:
Perfectly understood sir
Just this last question (quoted )
Click to expand...
Click to collapse
Yes it will be wiped, that is where your apps are stored. Just back them up first and and restore (app only) after flashing a new rom. Things like pictures and music will not be wiped though.
Sent from my SGH-T959 using Tapatalk 2
Didn't do a Odin flash yet... But tried out major ROMs Slimbean is awesome!
Sent from my SGH-T959 using Tapatalk 4 Beta
@TeeJay!!
Take a look at this thread and read it from front to back. It was when we got ICS, but there are many bits of info in there for bootloaders, why we have to flash certain things in certain order, hazards and pitfalls.
Will do sir! Tapatalk giving me problems so can't open that link... Will try it ASAP!
Sent from my SGH-T959 using Tapatalk 4 Beta
Related
Is it ok to flash a custom kernel on top of another custom kernel?
Sent from my GT-I9100 using xda premium
You dont need to revert on the original one before flash another custom. But you need to format dalvik cache and cache in recovery before flashing or you probably have a bootloop.
I suggest to make a backup of the rom in recovery, so If something goes wrong you can enter recovery and have the latest known working rom back in 2 minutes.
Please note flashing kernels always have a very small chance to corrupt your efs partition, its suggested to backup your efs folder before start play with roms and kernels. How to backup the efs, use the search tool of the forum
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
You dont need to revert on the original one before flash another custom. But you need to format dalvik cache and cache in recovery before flashing or you probably have a bootloop.
I suggest to make a backup of the rom in recovery, so If something goes wrong you can enter recovery and have the latest known working rom back in 2 minutes.
Please note flashing kernels always have a very small chance to corrupt your efs partition, its suggested to backup your efs folder before start play with roms and kernels. How to backup the efs, use the search tool of the forum
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for that. I know how to backup efs. Can i just use nitrality instead of ADB? To flash ROMs does it need to be in a specific firmware like sgsl or is it ok to have different firmware from the base of a custom rom?
Sent from my GT-I9100 using xda premium
I know my english sux sry:
Depends on the kernel but usually it is listed in the kernel thread the how to (odin or clockworkmod), clockworkmode is already on your phone if you rooted it with cf-root.
Now, to enter clockworkmod recovery, just push volume up + home + power button until the S2 bootlogo appears, then wait few seconds.
About the kernel type, i always flashed any kernel despite of my baseband, the difference is not so big.
if something is not working, you can always youse the nandroid backup (the backup done with the recovery cwm (up+home+power) and get back to the previous rom with previous kernel.
Im not really in the kernel "how to" someone else can prolly give you more detailed info, but as for me, i flashed ninphetamine 2.05 and 2.1.3 in cwm and it worked.
But.. as always, the kernel developers got a how to install in their kernel thread, so just read those and be sure about if you need odin or clockworkmod, if you are not sure, DONT flash anything until you are sure on how to proceed or wich system to use for flashing, better keep an old kernel with a working phone than have a brick to hold the papers
PS: also almost all the roms on the S2 forum are flashable with the clockworkmod, only few (like the lite'ning) are flashable with odin.
Again, i know im boring, dont proceed if you are not sure, better ask 10 times instead brick your phone
ephraim033 said:
Is it ok to flash a custom kernel on top of another custom kernel?
Yes not a problem flash as per the custom kernel instructions .
Kernel can be changed within an individual firmware or custom rom .
jje
Click to expand...
Click to collapse
Thanks for the reply guys. Coming back to my second question. What if i have KF1 and the rom i want to flash has a base of KI3, should i flash to stock KI3 first before flashing the custom rom or is it ok to flash a KI3 custom rom without flashing first to stock KI3?
Sent from my GT-I9100 using xda premium
The custom rom first, the kernel after.
I got the habbit to boot succesfully at least once the custom rom. If everything is ok i then flash the kernel. Better do 1 task at time.
You can decide to try the rom without change the kernel..and try a different one if you experience battery drain or other problems.
Sent from my GT-I9100 using Tapatalk
If i am on KH3 and want to flash a custom rom based on KI4 then i would flash stock KI4 and KI4 root first .
Custom rom flashed i will often try a different kernel later .
jje
from my experience
I have found that when i upgraded rom from gingerbread to ics that most custom kernals work with these roms ie now running with xxlpw ics (from gingerbread) with xwlp7 kernal. from what i have read on other posts and threads i could swap kernal to siya or any other as the mega good developers have made them (hotswappable) interchangeable as previous reply said swapping kernal might give you better battery or solve overheat probs.
Eg iwas running darkys rom with siya kernal v?something my phone rocketed temp in short time so i swapped kernal for an up to date one (could have used older one) it solved problem.
Anyone feel free to correct explination im still learning too lol
linuxnubee said:
I have found that when i upgraded rom from gingerbread to ics that most custom kernals work with these roms ie now running with xxlpw ics (from gingerbread) with xwlp7 kernal. from what i have read on other posts and threads i could swap kernal to siya or any other as the mega good developers have made them (hotswappable) interchangeable as previous reply said swapping kernal might give you better battery or solve overheat probs.
Eg iwas running darkys rom with siya kernal v?something my phone rocketed temp in short time so i swapped kernal for an up to date one (could have used older one) it solved problem.
Anyone feel free to correct explination im still learning too lol
Click to expand...
Click to collapse
I'll just point out this thread was dead since Sept 30 before you posted...
Is it possible to download back the old stock rom through ODIN and reinstall it on my ace? Or can I install it with CMW too from the SD card? Or is there some deleting and complexity involved in this backwards process?
Sure, you can instal any stock rom on your phone. Just have to have the firmware files. I just flashed back stock 2.3.4 after 7.1 CM BehradGH. And istaled BehradGH again I don't think u could instal any stock rom via CWM. Specialy the lower version u have.
Wojtys said:
Sure, you can instal any stock rom on your phone. Just have to have the firmware files. I just flashed back stock 2.3.4 after 7.1 CM BehradGH. And istaled BehradGH again I don't think u could instal any stock rom via CWM. Specialy the lower version u have.
Click to expand...
Click to collapse
Lmao nah bro it failed. I tried flashing it through ODIN and installing the stock 2.3.5 again and the phone was stuck in an endless boot. I got scared as hell and reflashed back to CM 7.1. I have no idea what happened though but everything is working fine. I guess I'll be sticking to CM7.
The reason I wanted to go back was because Heywire (txting app) was the only thing that stopped working after I flashed. I depend a lot on texting and I was thinking it'd go back if I went back to stock. I guess I'll have to try and find another alternative :/
Phone feels like a super phone though. LONG LIVE CM7!
Well, I'm not a developer or advenced user so I can't tell u the reason why you phone stuck in on boot. Today i was broke my CM7.1 Behrad and i could only go to download mode so i flash official 2.3.4 KPH and it's worked. Next i instaled CWM and BehradGH' rom again. Before useing BehradGH's rom i had Grif's KANG rom and after that i flash stock 2.3.4 to instal another CM7.1. It wasn't first time so I'm sure of that what i write here
Haha. I'm guessing we were both pretty lucky then. The first thing I did was to make sure I could boot into recovery. Then I reflashed CM7 from there. I'm still curious about the boot loop thing... I hope someone answers.
You need to flash a full package to not have a bootloop.
SuperAce609 said:
Lmao nah bro it failed. I tried flashing it through ODIN and installing the stock 2.3.5 again and the phone was stuck in an endless boot. I got scared as hell and reflashed back to CM 7.1. I have no idea what happened though but everything is working fine. I guess I'll be sticking to CM7.
The reason I wanted to go back was because Heywire (txting app) was the only thing that stopped working after I flashed. I depend a lot on texting and I was thinking it'd go back if I went back to stock. I guess I'll have to try and find another alternative :/
Phone feels like a super phone though. LONG LIVE CM7!
Click to expand...
Click to collapse
If u wer on cm7, then u should flash a full package bcoz cm7 converts ur system from rfs to ext. So wen u flash a full package, ur system is converted back to rfs.
Sent from my GT-S5830 using Grif's CyanogenMod
Dont jus say thanks, use d 'Thanks' button. [XDA-RULE]
Oh I see. How do I flash the whole package then?
SuperAce609 said:
Oh I see. How do I flash the whole package then?
Click to expand...
Click to collapse
You need to download something called a 5 file package, extract and then in Odin you deselect 'one package'. Generally for stock ROMs you select
OPS - cooper.ops
BOOT - APBOOT.......tar.md5
PHONE - MODEM......tar.md5
PDA - CODE......tar.md5
CSC - CSC.......tar.md5
easswar said:
You need to download something called a 5 file package, extract and then in Odin you deselect 'one package'. Generally for stock ROMs you select
OPS - cooper.ops
BOOT - APBOOT.......tar.md5
PHONE - MODEM......tar.md5
PDA - CODE......tar.md5
CSC - CSC.......tar.md5
Click to expand...
Click to collapse
Oooohh that. I remember doing that once before when I was flashing stock roms on my ace. Can you provide a link to these 5 file downloads? Thanks *clicks*
It's not 5 downloads.
Sammobile.com, find the KPH file. I know it's confirmed to be a full package.
It seems samfirmware.com is not updated with latest firmwares. So u can try sammobile.com which is updated.
Sent from my GT-S5830 using Grif's CyanogenMod
Dont jus say thanks, use d 'Thanks' button. [XDA-RULE]
dunno about now, but a long time back when i was flashing stock KPN, samfirmware.com had a one file KPN, so i flashed a 5 file KPE and then the KPN...
I think KPN is supposed to be better than KPH which was a leaked ROM.
SuperAce609 said:
Oooohh that. I remember doing that once before when I was flashing stock roms on my ace. Can you provide a link to these 5 file downloads? Thanks *clicks*
Click to expand...
Click to collapse
See attachment. Cooper.ops and Odin is already included in the zip file, just extract it. Happy flashing
http://hotfile.com/dl/134788696/23d069d/S5830XXKPH.rar.html
SuperAce609 said:
Haha. I'm guessing we were both pretty lucky then. The first thing I did was to make sure I could boot into recovery. Then I reflashed CM7 from there. I'm still curious about the boot loop thing... I hope someone answers.
Click to expand...
Click to collapse
Hey!
I think you was flashed the ONE package file, but jeah, you need MULTI package file for ODIN, flash from CM to STOCK ROM.
Just read the FLASHING TUT. before flashing!
CHEERS!
To back to stock rom i always use Odin Didn't said i do this by recovery. And always use multi-file pack. Never "one package" - some1 said it is unstable... So go to Download Mode and flash ur Ace by useing Odin and multi-file rom (OPS, PDA, BOOT, PHONE, CSC)
casiocas said:
Hey!
I think you was flashed the ONE package file, but jeah, you need MULTI package file for ODIN, flash from CM to STOCK ROM.
Just read the FLASHING TUT. before flashing!
CHEERS!
Click to expand...
Click to collapse
I know how to flash stock roms. I've been doing so since 2.2. I'm talking about going from custom to stock xD. But thanks for the link anyways, saving it just in case
droidtwoseven said:
See attachment. Cooper.ops and Odin is already included in the zip file, just extract it. Happy flashing
http://hotfile.com/dl/134788696/23d069d/S5830XXKPH.rar.html
Click to expand...
Click to collapse
Thanks a whole bunch! I didn't make a back up of my stock rom before flashing so it's really good to have this.
Wojtys said:
To back to stock rom i always use Odin Didn't said i do this by recovery. And always use multi-file pack. Never "one package" - some1 said it is unstable... So go to Download Mode and flash ur Ace by useing Odin and multi-file rom (OPS, PDA, BOOT, PHONE, CSC)
Click to expand...
Click to collapse
Unstable how? I've always used one packages for flashing stock roms and they've worked perfectly. Unless you're talking about the performance of the rom?
SuperAce609 said:
Unstable how? I've always used one packages for flashing stock roms and they've worked perfectly. Unless you're talking about the performance of the rom?
Click to expand...
Click to collapse
It's not unstable. You will only get boot problems flashing across android versions using one package files.
Sorry for being a bit dumb, I used to be on XDA all the time when I had my x10 but that's some time ago now!
I want to flash an original unbranded uk 2.3 ROM on to my phone. No tweaks, rooting etc
Can someone please help me find one or link me to the relevant thread?
And once I've got the ROM what do I need to do? With the x10 it was a simple case of place the zip on the sd, boot into xrecovery and flash. Is it the same with the GS2?
Curious as to why you'd want to put a 2.3 GB rom on your phone ? Anyhoo, have a look at this thread. If you find links don't work, note the details of the firmware you want & search Samfirmware.com for it.
Want to install unbranded GB so I can get the official ICS update via Kies. That would work - right?
Yep. If you install 'correct' stock rom for your region it should give you the correct CSC for your country & you should be able to get Kies updates. If it doesn't work, you can always grab ICS stock roms from here/elsewhere & flash them manually.
psx612 said:
Want to install unbranded GB so I can get the official ICS update via Kies. That would work - right?
Click to expand...
Click to collapse
Just a tad confused as there's so many ROMs to choose from!
I've installed Clockwork Mod, is it now just a case of find the correct ROM, stick it on the SD card and boot the phone in recovery?
Doubt you'll find many stock roms that are CWM flashable.
The majority (all ?) are Odin flashable, because people tend to go back to stock to either get a 'clean slate' they can then install custom roms/kernels over if they've had problems, or if they're sending the phone in for warranty service/replacement.
Right, so gotta work out how to use Odin....cheers!
So that means that custom ROMs can be flashed using CWM?
Sent from my GT-I9100 using xda premium
Many (most) custom roms are CWM flashable. Some also have Odin flashable versions.
That's what makes trying custom roms so easy, you backup your existing rom in CWM, flash the rom you want to try, if you don't like it you restore your backup & go back to your previous setup. All in a matter of minutes.
psx612 said:
Right, so gotta work out how to use Odin....cheers!
So that means that custom ROMs can be flashed using CWM?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
As to the last post .
I have custom GB rom and want to try but not buy ICS custom rom .
Nandroid backup of full existing GB rom and all apps and settings via CWM recovery .
Flash ICS custom rom via CWM recovery test it make a nandroid backup also .
Boot CWM recovery and go back to the exact GB settup and i can even restore the ICS rom again .
jje
First up, sorry for the new thread....
Now....i've just (this morning) upgraded to the S2 (international?)
I live in the UK and my phone is locked to 3 mobile UK.
I'm not totally new to the Android scene....my last phone was a Galaxy W that i rooted, flashed CWM to and flashed unofficial CM10 to.......
Believe me when i say i have put in the screen time on this....i've read xda, android forums, google searched, visited the cyanogen website and even tried github......
The trouble is that every method i've seen says something different....or it's for a different version of the OS....or it's for a different varient of the phone....etc, etc......
All i want to do is root, install CWM and flash JB to my phone with little or no chance of bricking it......
Here are the details for my phone...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please can someone help me by pointing me in the direction of the correct threads/tools.....
Thanks in advance....
Sent from my GT-I9100 using Xparent Green Tapatalk 2
keithross39 said:
All i want to do is root, install CWM and flash JB to my phone with little or no chance of bricking it......
Click to expand...
Click to collapse
IMHO, the most important thing to do before anything else is to confirm whether your phone has an "insane" EMMC chip affected by a superbrick bug. You have an ICS 4.0.4 installed, which might be a recipe for big trouble if you ever try wiping your data from recovery. Read this for more details: http://forum.xda-developers.com/showthread.php?t=1756242. There is an app here on XDA to verify your chip: http://forum.xda-developers.com/showthread.php?p=27014974.
The rest (rooting, CWM) has been covered extensively. If you want a stock or stock-based ROM, taking a quick glance over General or Development forums will give you sooo much info...
Try to stick to xda forums only.
Every other android forum gets its stuff from here anyway.
Sent from the little guy
kt-Froggy said:
IMHO, the most important thing to do before anything else is to confirm whether your phone has an "insane" EMMC chip affected by a superbrick bug. You have an ICS 4.0.4 installed, which might be a recipe for big trouble if you ever try wiping your data from recovery. Read this for more details: http://forum.xda-developers.com/showthread.php?t=1756242. There is an app here on XDA to verify your chip: http://forum.xda-developers.com/showthread.php?p=27014974.
The rest (rooting, CWM) has been covered extensively. If you want a stock or stock-based ROM, taking a quick glance over General or Development forums will give you sooo much info...
Click to expand...
Click to collapse
Well....this is me......
Unknown chip....don't know whether to feel relieved or not.....
REALLY beginning to have second thoughts as to whether i should modify this phone at all......
If i were to take the plunge....it's CM based ROMs i'm looking to flash....possibly 9, preferably 10.....
Sent from my GT-I9100 using Xparent Green Tapatalk 2
If you're honestly that terrified, leave it. There's always going to be risk if you flash. How much risk is determined by how poorly you follow instructions/learn (as opposed to having someone give you a bunch of steps to follow you don't understand). If you can follow instructions/learn, that risk is small. The risk increases exponentially with how badly you do those two things.
keithross39 said:
REALLY beginning to have second thoughts as to whether i should modify this phone at all...
Click to expand...
Click to collapse
Read carefully the first thread I referenced - it tells you how to avoid a brick, and it's not that complicated. As already said, you need to understand the steps, rather than just follow them. I have a bad chip, and I am still OK after about 10 or so full ROM flashes (both through Odin and recovery), and probably twice as many kernels... There is always a chance of something going sideways, so you have to decide for yourself. Some phones are easier ro screw up than others. I also have an LG P990 - that phone is literally unbrickable, short of physical damage. Unfortunately, can't say the same about SGS2, but I am still flashing it...
Good luck!
Thats the thing...i CAN follow instructions and read threads etc....(i created a help thread over on the galaxy W forum which was sticky'd that was based on what i'd read and understood)
It's just that i select a thread that might be of use, read it, and discover it applies to a different varient of the phone....or a different OS version...........
Sent from my GT-I9100 using Xparent Green Tapatalk 2
keithross39 said:
Thats the thing...i CAN follow instructions and read threads etc....(i created a help thread over on the galaxy W forum which was sticky'd that was based on what i'd read and understood)
It's just that i select a thread that might be of use, read it, and discover it applies to a different varient of the phone....or a different OS version...........
Sent from my GT-I9100 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
-take necessary backup (sms/contacts/apps etc)
-download stock JB 4.1.2 from sammobile.com
-flash it via odin
-if you are stuck in samsung logo, reboot in recovery mode and factory reset & reboot it would be fine
-to root, download Philz latest CWM and flash it.
-you can also try NeatROM lite (which has samsung boaltware removed)
kmaq said:
-take necessary backup (sms/contacts/apps etc)
-download stock JB 4.1.2 from sammobile.com
-flash it via odin
-if you are stuck in samsung logo, reboot in recovery mode and factory reset & reboot it would be fine
-to root, download Philz latest CWM and flash it.
-you can also try NeatROM lite (which has samsung boaltware removed)
Click to expand...
Click to collapse
Thanks for the info kmaq....
I've been looking at the Dorimanx kernel....if i read it right it includes root and cwm.....is this a good choice? Also am i right in thinking that i can go on to flash ANY cusROM once that kernel is installed?
Sent from my GT-I9100 using Xparent Green Tapatalk 2
keithross39 said:
I've been looking at the Dorimanx kernel....if i read it right it includes root and cwm.....is this a good choice? Also am i right in thinking that i can go on to flash ANY cusROM once that kernel is installed?
Click to expand...
Click to collapse
Yes, it includes root (using Chainfire's SuperSU) and touch CWM. Dori seems to work very well for me. Stable, with nice customizations. Many people would consider it the best kernel, but we know there is no such thing...
Nobody can guarantee that ANY ROM will work with a particular kernel. It's always best to read both ROM and kernel threads about compatibility. Some ROM/kernel combos are known for problems. But Dori is supposed to be compatible with most of the ROMs.
One thing to keep in mind is that CWM will not do a complete Nandroid backup for you - it doesn't include Preload partition. Workarounds are available, like hawkerpaul's scripts, or Onandroid.
Thanks again kt-froggy for your reply and info....
So the steps i need to undertake are.....
1) flash dorimanx kernel via odin.
2) create a nandroid backup (without using cwm)
3)Wipe cache, dalvic and data.
4) flash this ROM....
http://forum.xda-developers.com/showthread.php?t=1794758
And it's associated gapps via the newly installed cwm.
5) wipe cache and dalvic again and reboot.....
Edit....just read further down the install instructions for the Rom and it mentions cwm flashable modem....do i need to worry about that?....
Sent from my GT-I9100 using Xparent Green Tapatalk 2
keithross39 said:
So the steps i need to undertake are.....
1) flash dorimanx kernel via odin.
2) create a nandroid backup (without using cwm)
3)Wipe cache, dalvic and data.
4) flash this ROM....
http://forum.xda-developers.com/showthread.php?t=1794758
And it's associated gapps via the newly installed cwm.
5) wipe cache and dalvic again and reboot.....
Click to expand...
Click to collapse
I am not an expert by any means, so don't take my words as the ultimate truth... Others may have better advice. Besides, I know almost nothing about CM, as my preference has always been towards stock-based ROMs... The best option would be to follow instructions in CM thread you mentioned -- it tells you exact steps for installing it. Flash Dori kernel (or any other safe kernel, for that matter) first using Odin, to make further steps safe for you (because of a brick risk with your current 4.0.4 stock kernel). It is supposed to be compatible with CM10 (Dori was saying that CM10.1 is broken). The latest version (7.46) has some mixed reviews, so you may want to use 7.45 - it is available in both TAR and ZIP versions for flashing via Odin or recovery. You can make a nandroid backup using CWM, just run hawkerpaul's script to also backup Preload partition.
Edit....just read further down the install instructions for the Rom and it mentions cwm flashable modem....do i need to worry about that?....
Click to expand...
Click to collapse
Modem (or baseband) is something you can flash separately from a kernel or ROM. Different basebands work better than others, depending on your area and your carrier. I'd say you don't need to worry about it, but you can always try flashing a different baseband if you have some problems (cell and WiFi signal strength, overheating, etc.)
kt-Froggy said:
I am not an expert by any means, so don't take my words as the ultimate truth... Others may have better advice. Besides, I know almost nothing about CM, as my preference has always been towards stock-based ROMs... The best option would be to follow instructions in CM thread you mentioned -- it tells you exact steps for installing it. Flash Dori kernel (or any other safe kernel, for that matter) first using Odin, to make further steps safe for you (because of a brick risk with your current 4.0.4 stock kernel). It is supposed to be compatible with CM10 (Dori was saying that CM10.1 is broken). The latest version (7.46) has some mixed reviews, so you may want to use 7.45 - it is available in both TAR and ZIP versions for flashing via Odin or recovery. You can make a nandroid backup using CWM, just run hawkerpaul's script to also backup Preload partition.
Modem (or baseband) is something you can flash separately from a kernel or ROM. Different basebands work better than others, depending on your area and your carrier. I'd say you don't need to worry about it, but you can always try flashing a different baseband if you have some problems (cell and WiFi signal strength, overheating, etc.)
Click to expand...
Click to collapse
We need a couple of guys like this.
Can you clone yourself like...5 times?
Sent from the little guy
gastonw said:
We need a couple of guys like this.
Can you clone yourself like...5 times?
Click to expand...
Click to collapse
Why, thanks, but... Like I said, I am no expert (not even close, haha). But when I know something, I try to help -- however little, it's still some contribution to the community. Most of the time here on XDA I just read and learn...
kt-Froggy said:
Why, thanks, but... Like I said, I am no expert (not even close, haha). But when I know something, I try to help -- however little, it's still some contribution to the community. Most of the time here on XDA I just read and learn...
Click to expand...
Click to collapse
kt....you may think you know "very little" about the S2, but you know way more than me....and i for one, appreciate your help....thanks mate....
Sent from my GT-I9100 using Xparent Green Tapatalk 2
Ok, lets hug it out now.
No homo stuff tho.
Sent from the little guy
Lol...any last minute advice before i begin?....if not, I'll see y'all on the other side......hopefully
Sent from my GT-I9100 using Xparent Green Tapatalk 2
Well...i'm part way there.....i've rooted using this method.....
http://forum.xda-developers.com/showthread.php?t=1501719
I couldn't find a "tar" version of dorimanx and siyah wouldn't install through odin, so i had to do it this way.
My question now is.....
Do i NEED to install a custom kernel, or will the stock kernel support a cusROM ?....specifically the CM10 that i linked to in my earlier post?......
Sent from my GT-I9100 using Xparent Green Tapatalk 2
CMW (that is now your recovery)
Sent from the little guy
keithross39 said:
Well...i'm part way there.....i've rooted using this method.....
http://forum.xda-developers.com/showthread.php?t=1501719
I couldn't find a "tar" version of dorimanx and siyah wouldn't install through odin, so i had to do it this way.
Click to expand...
Click to collapse
Technically, you didn't need to root your current ROM, since it has no relevance to your ability to flash CM10... For TAR version of Dori kernel, look here -- Kernel-V7.45-[01-10]-[29-01]-TAR-FOR-ODIN.tar. This download link is posted in the kernel's thread.
Do i NEED to install a custom kernel, or will the stock kernel support a cusROM ?....specifically the CM10 that i linked to in my earlier post?......
Click to expand...
Click to collapse
Not sure if I understood the question exactly... CM10 that you referenced includes its own kernel, so your stock kernel is irrelevant and doesn't have to support CM10 -- it will be replaced the moment you flash it. The only thing you really need to flash a custom ROM is a custom recovery (CWM or TWRP). BUT, as you already know, you have a 4.0.4 stock kernel that is affected by a superbrick bug, and you are not sure about your EMMC chip. So, flash a safe kernel first (Dori is a good option, but it can be a different one). It will include the CWM recovery (permanent -- not temporary, like you used for rooting). After that, you can safely flash your CM ROM from CWM, followed by gapps.
Once you are on CM, your kernel (the one that you flashed before) will be gone and replaced by the CM kernel. You can keep it, or, if you want, you can then re-flash another kernel of your choice (Dori or other).
Hi Everyone!
This is my first thread on XDA.Hope I'll get quick and helpful replies
I just bought a samsung galaxy s2 at&t variant.
1 - The phone is rooted and superuser is intalled but when I go into recovery its something like android 3e recovery which is stock recovery I guess,so my question is will I be able to flash using this stock recovery if not should I re-root my s2 to get clockworkmodrecovery or is there any other method to get cwmr?If I have to re-root my s2 then whats the easiest way to do it?
2 - How to flash custom rom without risk of getting bricked?
3 - How to make backup of stock ROM and other things?
4 - Another question is my phone is unlocked now and will I loose it after flashing?Suppose my phone is locked again so will I get my phone unlocked again through galaxsim or similar softwares without any hazard and use any sim I want?I read somewhere that its important to use the same software for unlocking again that u used before,is this true?
5 - My phone is running on 2.3.4 and I want to upgrade to either ICS or JB.Are there stable JB and ICS roms available for s2 i777?
Is there any official update of android for I777?
Some more info:
Baseband Version:I777UCKH7
Kernel Version:2.6.35.7
Build Number:GINGERBREAD.UCKH7
I am still learning so plz ignore my noobism.
Thanks.
mostwantedht said:
Hi Everyone!
This is my first thread on XDA.Hope I'll get quick and helpful replies
I just bought a samsung galaxy s2 at&t variant,the phone is rooted and superuser is intalled but its not rooted with clockworkmod bcz when I try to go into recovery it takes me to something like android 3e recovery,so my question is will I be able to flash s2 using this android 3e recovery if not should I root my s2 again and if yes then how,whats the easiest way to root it again with cwm?I've experience rooting with odin...
Once the rooting is done then how to flash custom rom without risk of getting bricked?
Another question is my phone is unlocked now and will I loose it after flashing?Suppose my phone is locked again so will I be able to unlock it through galaxsim or similar softwares without any hazard and use any sim I want?I read somewhere that its important to use the same software for unlocking again that u used before,is this true?
My phone is running on 2.3.4 and I want to upgrade to either ICS or JB.Are there stable JB and ICS roms available for s2 i777?
Is there any official update of android for I777?
Some more info:
Baseband Version:I777UCKH7
Kernel Version:2.6.35.7
Build Number:GINGERBREAD.UCKH7
Thanks.
Click to expand...
Click to collapse
I'll give you a quick head-up then you go off and do your own.
In the bold, since it's rooted, get the Odin Mobile, flash the custom kernel which should already included the CwMR. From there, boot into CwMR and flash any custom ROM you want.
The open sentence, you said the phone is rooted, then you asked how to root, I think you need to understand more. Anyway, read those Stickies threads more and more. For the starter, search for "creepyncrawly" and read ALL threads in his signature.
votinh said:
I'll give you a quick head-up then you go off and do your own.
In the bold, since it's rooted, get the Odin Mobile, flash the custom kernel which should already included the CwMR. From there, boot into CwMR and flash any custom ROM you want.
The open sentence, you said the phone is rooted, then you asked how to root, I think you need to understand more. Anyway, read those Stickies threads more and more. For the starter, search for "creepyncrawly" and read ALL threads in his signature.
Click to expand...
Click to collapse
Do cwm and rooting have any relation?
The phone is rooted but when I go into recovery its other than cwm and through which I can't install custom rom so I asked if I have to "re-root" to get cwm or not...
Things are little clear to me after reading stickies.
Ignore the first two questions and answer the others plz.
mostwantedht said:
Do cwm and rooting have any relation?
The phone is rooted but when I go into recovery its other than cwm and through which I can't install custom rom so I asked if I have to "re-root" to get cwm or not...
Click to expand...
Click to collapse
Root and CWM have no relation. Having root will allow you to obtain CWM by flashing a kernel that includes CWM. All of the kernels for our phone on this site include CWM. So as votinh mentioned, install mobile odin (which you can find on this site), and then flash one of the kernels from this forum, which will give you CWM.
mostwantedht said:
Things are little clear to me after reading stickies.
Ignore the first two questions and answer the others plz.
Click to expand...
Click to collapse
Those questions you can easily find on Google.
Sent from my Zanpakuto using Getsuga Tensho!
mostwantedht said:
Things are little clear to me after reading stickies.
Ignore the first two questions and answer the others plz.
Click to expand...
Click to collapse
If you get and get to know with 1 and 2 then question 3 will be easily answered.
Get into the recovery, play and understand all options, it's not many though.
About 4, I said 80% you will not lose the unlock if you understand the factors. It means 20% is your fault if you do not follow the instruction so go off and hunting that 20%. Be sure of what you do.
About 5, do you know what version of OS currently on your phone? Get it right first before doing anything else.
mostwantedht said:
Is there any official update of android for I777?
Click to expand...
Click to collapse
I777UCKH7 Gingerbread 2.3.4 (original release firmware)
I777UCKK6 Gingerbread 2.3.6 (various issues)
I777UCLE5 ICS 4.0.3 (the kernel may have contained eMMC cap erase bug)
I777UCLC3 ICS 4.0.4 (serious sleep of death issue)
I777UCLL6 ICS 4.0.4 (fixes sleep of death issue)
See the links in my signature for 1,3 and 5 firmware downloads. Also see my signature to discover my favorite Jelly Bean.
Ok so before flashing custom kernel and rom after that,should I backup stock ones ?
"Nandroid" will this app help me in making backup of stock rom and kernel and also to recover whenever I want?I am just asking bcz I had bad experience with it when I made backup of stock rom on my galaxy mini.I was confused between root and cwm bcz when I rooted my mini cwm was included with it without flashing custom kernel.
Which kernel to flash,any specific?
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
creepyncrawly said:
I777UCKH7 Gingerbread 2.3.4 (original release firmware)
I777UCKK6 Gingerbread 2.3.6 (various issues)
I777UCLE5 ICS 4.0.3 (the kernel may have contained eMMC cap erase bug)
I777UCLC3 ICS 4.0.4 (serious sleep of death issue)
I777UCLL6 ICS 4.0.4 (fixes sleep of death issue)
See the links in my signature for 1,3 and 5 firmware downloads. Also see my signature to discover my favorite Jelly Bean.
Click to expand...
Click to collapse
Can I get that UCLL6 update on my device that is with UCKH7?
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
mostwantedht said:
Can I get that UCLL6 update on my device that is with UCKH7?
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Sure.
Use the UCLL6 plus root package from the link. The one-click downloader is easiest. Then, if you want, install Mobile Odin lite or Mobile Odin pro and use it to flash a custom kernel such as AJK or Siyah.
And... I would suggest you read through the first link in my signature to learn the basics.
creepyncrawly said:
Sure.
Use the UCLL6 plus root package from the link. The one-click downloader is easiest. Then, if you want, install Mobile Odin lite or Mobile Odin pro and use it to flash a custom kernel such as AJK or Siyah.
And... I would suggest you read through the first link in my signature to learn the basics.
Click to expand...
Click to collapse
Dude is there any risk of getting my phone locked after updating to this package?
And what would u suggest me to install custom ROM or the official one!
In one-click downloader update,what will I have to do?Just to open some app or any other thing?
mostwantedht said:
Dude is there any risk of getting my phone locked after updating to this package?
Click to expand...
Click to collapse
Not really sure, but probably not. AFAIK, most of the lost unlocks happen with Jelly Bean. But if it does happen, you should be able to unlock it again with galaxsim unlock.
And what would u suggest me to install custom ROM or the official one!
Click to expand...
Click to collapse
Depends on what you want. UCLL6 is Ice Cream Sandwich, 4.0.4. If you prefer Jelly Bean, there are several great firmware distributions, both Samsung based and AOSP based, available in the development section of this forum.
In one-click downloader update,what will I have to do?Just to open some app or any other thing?
Click to expand...
Click to collapse
1. Enter recovery and perform a wipe data/factory reset.
2. Open one-click downloader on your pc's desktop.
3. Put your phone into download mode.
4. When the phone is recognized in the one-click downloader, press start.
If you need detailed descriptions of these steps, read the guides linked in my signature.
After the phone restarts with UCLL6 stock plus root, I would suggest you use Mobile Odin to install a custom kernel as I mentioned before. The phone will run better, and you avoid the possibility of the eMMC cap erase bug, if that still exists in the stock UCLL6 kernel (which is unknown).
If you want custom firmware instead of stock, you are now ready to use ClockworkMod Recovery to flash that new firmware.
creepyncrawly said:
Not really sure, but probably not. AFAIK, most of the lost unlocks happen with Jelly Bean. But if it does happen, you should be able to unlock it again with galaxsim unlock.
Depends on what you want. UCLL6 is Ice Cream Sandwich, 4.0.4. If you prefer Jelly Bean, there are several great firmware distributions, both Samsung based and AOSP based, available in the development section of this forum.
1. Enter recovery and perform a wipe data/factory reset.
2. Open one-click downloader on your pc's desktop.
3. Put your phone into download mode.
4. When the phone is recognized in the one-click downloader, press start.
If you need detailed descriptions of these steps, read the guides linked in my signature.
After the phone restarts with UCLL6 stock plus root, I would suggest you use Mobile Odin to install a custom kernel as I mentioned before. The phone will run better, and you avoid the possibility of the eMMC cap erase bug, if that still exists in the stock UCLL6 kernel (which is unknown).
If you want custom firmware instead of stock, you are now ready to use ClockworkMod Recovery to flash that new firmware.
Click to expand...
Click to collapse
I would have given u 1000 thanks if I could
Bro is there any app that make the backup of stock rom and kernel also the apps and easy to restore...?
Not trying to be mean here, but every single question you asked has already been answered and is freely available here on xda to read. Read every sticky note (those are important threads) and search for any issues you have questions about, either using google or xda searche. I realize its easier for you just to ask. But a lot of time and effort was made to make the threads that already exist to help new members and allow our forums to remain unclogged with many threads pertaining to the same questions. I do wish you all the best, and it can be overwhelming. But we've all got to be held to the same standard .
Phalanx7621 said:
Not trying to be mean here, but every single question you asked has already been answered and is freely available here on xda to read. Read every sticky note (those are important threads) and search for any issues you have questions about, either using google or xda searche. I realize its easier for you just to ask. But a lot of time and effort was made to make the threads that already exist to help new members and allow our forums to remain unclogged with many threads pertaining to the same questions. I do wish you all the best, and it can be overwhelming. But we've all got to be held to the same standard .
Click to expand...
Click to collapse
Well I had more then one question so it was easy to ask in one thread.I know its my laziness,sorry for that and I won't start new thread for minor issues again
Ok so there is some serious issue with my friend's s2,he can't unlock his phone,he tried every possible way.Can anyone help him with this plz?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@creepyncrawly
Bump...help me with the imei prob...
Your friend most likely corrupted his efs while trying. Did he back up the original efs?
He should try this tool to see if that fixes it.
https://play.google.com/store/apps/details?id=com.helroz.GSII_Repair
Sent from my SGH-I777 using xda premium
Red_81 said:
Your friend most likely corrupted his efs while trying. Did he back up the original efs?
He should try this tool to see if that fixes it.
https://play.google.com/store/apps/details?id=com.helroz.GSII_Repair
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
No he didn't backup original efs
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2