Sorry for the stupid question - it's been a while that I used my X10 Mini Android phone...
I am trying to revive my phone for my son and just installed newest stock ROM from Sony. Everything works as Sony - expected, however I do not find e.g. the App Kytephone in the store to install. I heard that this app pretty much close down the phone and makes any android phone a great kids phone.
Any help how I can install that app? Any stting or update to marketpalce needed Would updating to any custom ROM might make that App available to install ? Which one is most stable (as my son shouldn't use too many features anyway...)
THANK YOU!
It needs Android 2.2 or higher, and sony's latest update is 2.1, that's why you can't find it in the store, so upgrading to a custom froyo or gingerbread rom should do the trick
SmG67 said:
It needs Android 2.2 or higher, and sony's latest update is 2.1, that's why you can't find it in the store, so upgrading to a custom froyo or gingerbread rom should do the trick
Click to expand...
Click to collapse
Awsome - thanks, will try. I know this is a non-checker question and it all depends on individual opinions... However, could you name any ROM that has its strength in stability and battery life?
I would go with MiniCM7, the last version to run on stock kernel was 2.0.7, which is quite stable.
Or you could try this, which should run on 2.1 too
SmG67 said:
I would go with MiniCM7, the last version to run on stock kernel was 2.0.7, which is quite stable.
Or you could try this, which should run on 2.1 too
Click to expand...
Click to collapse
Flashed CM7 - works great
Kytephone has some uber features, although Kiddo place looks promising. Thanks again for coaching, kid will love his 1st phone
how run "unsuppoerted" apps ? I cant find them oon market ? ...
NoOne00 said:
how run "unsuppoerted" apps ? I cant find them oon market ? ...
Click to expand...
Click to collapse
The market will only show apps that are suitable for our phones. You get more choice if you run the latest custom rom (which is Jellybean), but the market will also take into account things like the screen resolution, and the architecture of the chip used.
Apps developed specifically for Armv7 or higher won't run on our phones, which have Armv6 architecture, and if an app requires a resolution higher than 240x320, then the market won't show those options either.
If you want to try an app that is unsopported, find a .apk for that app (use a general search for that app), copy it to your sd-card and install it from there. If the app checks it's own requirements (rather than let google-play decide if it's appropriate) it still won't install though. Sometimes you'll get lucky, but that is really rare.
Usually the only way to get an 'unsupported' app to run is to get a different device that fulfill it's requirements.
Related
Hey
Can anybody recommend a stable and fast vanilla 2.1 ROM for the Hero?
I've tried Vanillain but found it to be quite laggy and FC'ing.
If not, can anybody suggest any 2.1 ROM I can use and just disable SenseUI?
Thanks
kie.
Im in search for this also. Currently using latest ahero but im not satisfied. Best vanilla rom I've tried is aychteesee but that's 1.5 it is fast as hell. Every 2.1 rom i tried is laggy as hell.
norpan111 said:
Im in search for this also. Currently using latest ahero but im not satisfied. Best vanilla rom I've tried is aychteesee but that's 1.5 it is fast as hell. Every 2.1 rom i tried is laggy as hell.
Click to expand...
Click to collapse
Exactly the same for me,,, I like Vanilla but agree, the 1.5 makes it not an option for me.... please can someone help us ??????
I'm sure we'll see some good vanilla 2.1 ROMs once HTC releases the 2.1 kernel source. Of course, that could take forever.
To be honest, the best "workaround" I have found is to use a 2.1 ROM and disable Sense UI.
I have been using Legendary recently using this method, the battery life is second best to any other ROM I have tried but it is very laggy and annoying to use. I find that AutoKiller shows a lot of processes running which can be stopped. This does speed the handset up alot, but say you close the People application, then open it again, it takes a while to show contacts.
I am literally going back to SenseHero 1.6 as we speak because 2.1 ROMs arn't great at the moment, and I will be disabling SenseUI, seems to use alot of resources and slows the phone down a bit.
For people who want to disable SenseUI...
Go to Settings > Applications > Manage Applications > SenseUI and click Clear Defaults. Press the Home button and then choose Home (you can also tick the box to use Home as the default Launcher)
BTW, I am quite new to android so any other advice would be cool, like what can actually be done with a rooted handset? I have failed to see any benefits yet (apart from an unlock)...
norpan111 said:
Im in search for this also. Currently using latest ahero but im not satisfied. Best vanilla rom I've tried is aychteesee but that's 1.5 it is fast as hell. Every 2.1 rom i tried is laggy as hell.
Click to expand...
Click to collapse
The best 2.1. IMO is Villain 3.4
As mentioned I've disabled sense and installed helix launcher.... I've tried all the roms, but 3.4 gives me the speed I need and most important, everything works.
The absolut very best rom is "SenseHero2.1" from "Stickman" (or try the 1.6 version, also still available)
its: FAST, STABLE, GOOD LOOKING, and WORKS!
http://www.htcdevscene.info/showthread.php?63-[ROM]-[17-04-10]-SenseHero-2-1-Beauty-Speed-Stable-[ONLINE]
oh, and no GPS problems or forced closings whatsoever, enjoy!
romflasher said:
The absolut very best rom is "SenseHero2.1" from "Stickman" (or try the 1.6 version, also still available)
its: FAST, STABLE, GOOD LOOKING, and WORKS!
http://www.htcdevscene.info/showthread.php?63-[ROM]-[17-04-10]-SenseHero-2-1-Beauty-Speed-Stable-[ONLINE]
oh, and no GPS problems or forced closings whatsoever, enjoy!
Click to expand...
Click to collapse
I have to agree that this rom is very veruy good,.... only problem is the vanilla lockscreen
Every ROM on 2.1 i tried is very slow compared to the fastest 1.5 there is like aychteesee. And disabling sense is only changing the homescreen i like vanilla everywhere
Personally, I use Fresh 2.0d rom found here:
http://forum.xda-developers.com/showthread.php?t=643034
My advice is to update your recovery console to RA 1.6.2 (check version for your phone first at the site) .. found here:
http://forum.xda-developers.com/showthread.php?t=561124
Once you're RA is up to date, use the utiilities in the RA console to do a nandroid back up of your o/s, then wipe system and existing partition, repartition your sd card and convert ext2 to ext3. It will only take a minute to do all of that.. its really easy. Then flash Fresh rom and check his site for standard sprint apps if you want to install them. The rom has auto a2sd if you're interested in having your apps stored and run from your sd card. It didnt work on mine until I went into the recovery and manually flashed the as2d program using Darktremor A2sd 2.6:
http://forum.xda-developers.com/showthread.php?t=670087
After that, it worked great (at least for me it did). Pretty much everything works on the rom with the exception of live wallpaper, you can add it but then the weather animations wont work so its one or the other based on what you prefer. They have a fix for the lock screen as well but it has 3 different options based on alarm preferences. Other than that, I found it to be fast, functional and fun. Definitely better than any other rom I've used so far and about the closest you'll get right now to anything resembling an official 2.1 rom. Just remember to make that nandroid backup of your o/s before you do anything in case you don't like the rom (which I doubt will happen).
Best of luck guys!
another vote for fresh 2.0d, ran so much faster than the sprint 1.5 i had even after i removed all the bloatware.
Hi, got a little question..
just want to know if you can use standard apps from 2.2.1 (like camera, and messages)
to include then in 2.1 rom?
like take the libcameraservice.so etc. and the apk from /system/app and replace them with
the ones from a 2.2.1 ROM
could it work?
thx
Not sure it will.. Often the camera is annoying at this point.. Why don't just flash a 2.2-rom? Then you will be able to use more of the "new" android functions as the push-messages/chrome-to-phone things?
mljjlm said:
Not sure it will.. Often the camera is annoying at this point.. Why don't just flash a 2.2-rom? Then you will be able to use more of the "new" android functions as the push-messages/chrome-to-phone things?
Click to expand...
Click to collapse
yeah i'm using 2.3 atm, but i want to obtain some knowledge about the system and try some things on an older ROM before messing with newer stuff noticed the camera being hard, don't even know if they'll fix it
In this place we have the new firmware for Xperia, but I cant use it.
developer.sonyericsson.com/wportal/devworld/downloads/download/x10x10minix10miniprox8eclair21a0435tar?cc=gb&lc=en
What we need to do to use it?
I hope have helped.
Open Source!!??
When it will be released?
Sent from my X10i using XDA App
Looks like the update for dual-touch. :/
will we be able to use this firmware with the help of someone here?
multi touch is already update = =' must b sumthin else
robsonsop said:
In this place we have the new firmware for Xperia, but I cant use it.
developer.sonyericsson.com/wportal/devworld/downloads/download/x10x10minix10miniprox8eclair21a0435tar?cc=gb&lc=en
What we need to do to use it?
I hope have helped.
Click to expand...
Click to collapse
It's is a developers source code and if I am not wrong these are for developers to look into and tinker around with.
Firmware for end-user is available via OTA/SEUS/PC Companion as per company's plan generally a few days/weeks after being mentioned on PRTDC.
Sent from my X10i using XDA App
This is not usable as a ROM. It's only the Source data that SE has to release as per the Open GPL Licenses....
The only workaround with this file should be to compile some Kernel Modules like tun.ko etc...
As Kloud_ said the firmware releases are sent via SEUS/PC Companion....
Jim
Someone who knows what they are looking for can tell what is included in the update from the source code posted above, though
I'm not smart enough for that
multi touch was updated officially on the 20th right?
can anyone confirm that mediascape supports multi touch?
Sent from my X10i using XDA App
SiRIus[X] said:
multi touch was updated officially on the 20th right?
can anyone confirm that mediascape supports multi touch?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I confirm that Mediascape does not support the released dual-touch update.
hush66 said:
I confirm that Mediascape does not support the released dual-touch update.
Click to expand...
Click to collapse
Works on my phone(at least in the picture viewer portion of mediascape). MT works in all apps that support it at all.
I'm currently running:
Firmware: 2.1-update-1
Baseband: 2.0.46
Kernel: 2.6.29
Build: 2.0.A.0.504 (MT update and fix(mt for all apps) with JIT enabled)
i wonder when SE will show 2.2 after all
juviman35 said:
i wonder when SE will show 2.2 after all
Click to expand...
Click to collapse
they OFFICIALLY said: NEVER
fred444 said:
they OFFICIALLY said: NEVER
Click to expand...
Click to collapse
Well, do you remember what they said about multi/dual-touch?
"NEVER" or something, my memory's kinda fuzzy... Though this time I'm rather sure that they really meant never as, well, never.
ooidort said:
Well, do you remember what they said about multi/dual-touch?
"NEVER" or something, my memory's kinda fuzzy... Though this time I'm rather sure that they really meant never as, well, never.
Click to expand...
Click to collapse
Believe me, it will never appear.
They are going to release the Xperia ARC in q1 with gingerbread 2.3 and then nobody cares about the X10.
The X10-Roadmap ends with a UXP upgrade in January.
fred444 said:
Believe me, it will never appear.
Click to expand...
Click to collapse
...I did agree with you, if that was unclear. Just saying that they also said "never" for the multi/dual-touch implementation, though doesn't necessarily mean anything.
Guys I updated my phone thru SE today.This is actually a rom.the base band and the build number are different and also could root the phone with flash tools.
Screen shots.Also added the 2.2.11 market and some other stuff like Neo reader and post card which are not really usable.But i Confirm you can root the device,
ooidort said:
...I did agree with you, if that was unclear. Just saying that they also said "never" for the multi/dual-touch implementation, though doesn't necessarily mean anything.
Click to expand...
Click to collapse
They did once say they may be able to get multi-touch working on the X10 tho, they have never said they may release 2.2.
It isn't going to happen, never ever will, end of story.
If they did I would prefer FreeX10 anyway, as SE 2.2 would have too much ****e on it
2.1.A.0.435 = poor perfromance
SE update service announced this a while back but ignored it until I got a dead ROM, which happened today while playing with Gingerbread 2.3.1 - TripNRaVeR v1.1 - since gone to 1.2 and with the sound / keyboard / wifi / sdcard fixes in place and working, highly recommend checking it..
EDIT: After flashing back to this standard ROM to look into MultiTouch further, found Multitouch is implemented in stock 2.1.A.0.435 ROM. Working with browser, docs, Angry Birds, Maps and more, not Navigation by default, investigating.
So there you have it - Multitouch is enabled on the 435 ROM. All other ROM versions can add it with the Dual Touch kernel mod and setting the xml file options / Build.prop etc.. takes 10 minutes and is worth it!
The new Mediascape has a Plus / Minus flexible icon that appears when you hold your finger on the picture, allowing you to zoom in and out, but not pinch ouch!
2.1.A.0.435 is the slowest ROM I've used. Linkpack score of 6.xx - totally lame app performance, constantly killing processes and I gave up using it within 2 hours, not even bothering to make an update.zip to return to xRecovery loading my preferred 2.0.2.A.0.24 with XGbread theme.
EDIT 2: Don't recommend downgrading from 2.3.1 to 2.1.A.0.435 ROM by Flashing with Update Service and then using xRecovery to attempt loading 2.1.A.0.24 - as this bricked my device and was forced to use the Update Service to go back to 2.1.A.0.435, which is where I am stuck right now - lol - this is because of the baseband version being so different you will always receive - No service - WiFi will crash repeatedly and basically you can't use it as a phone anymore.
Root via SuperOneClick - works! - Install BusyBox - works! - load xRecovery works!
Hi,
I´m writing this post to notify that there is a new official update from toshiba.
I cannot give more information, because my folio is in SAT, but the version number might be "18/02/2011 (2.2.5.0131)". I have no info about changes yet, but I´ve red something about preparation for the new flash player and more utilities.
My source:
htcmania.com/showthread.php?p=1874046&posted=1#post1874046
(Sorry, I can´t still post urls, you may add the usual www to check the adress)
Maybe we have new materials for our favourite mods (for me, Folionotion and foliomod, I can´t decide).
Any additional info will be wellcome, thanks
herozote said:
Hi,
I´m writing this post to notify that there is a new official update from toshiba.
I cannot give more information, because my folio is in SAT, but the version number might be "18/02/2011 (2.2.5.0131)". I have no info about changes yet, but I´ve red something about preparation for the new flash player and more utilities.
My source:
htcmania.com/showthread.php?p=1874046&posted=1#post1874046
(Sorry, I can´t still post urls, you may add the usual www to check the adress)
Maybe we have new materials for our favourite mods (for me, Folionotion and foliomod, I can´t decide).
Any additional info will be wellcome, thanks
Click to expand...
Click to collapse
New update is fantastic, touchscreen is super sensitive, battery lenght really improve, And rotation od screen is super fast and smooth. Flash work perfectly. Really a great update. Finally I can say thanks Toshiba.
Impressive the laggs are completly removed
MCLP said:
Impressive the laggs are completly removed
Click to expand...
Click to collapse
Is there support to market place?
Will we have it in mods ???
I have installed it.
It seems to be more performance in 3D games.
Flash plugin preinstaled, and it can run the flash animation in Toshiba's web page .
It solves some bug about brong accelerometer axis in some games.
But no Android Market, only the same *sigh* Toshiba Market.
The question is whether we can install FolioMod on top of this update or not. For me,it's not worth updating this without DexterMod, which is already very good imo
xitrumch said:
The question is whether we can install FolioMod on top of this update or not. For me,it's not worth updating this without DexterMod, which is already very good imo
Click to expand...
Click to collapse
if you wantt custom mods, you avoid the update!!!!
THIS UPDATE WILL BLOCK YOUR UPDATE OPTIONS, AND BYE BYE CUSTOM ROMS
I confirm that the root of 5.0131 is ok yessssssss !
I'm guessing this updates the recovery kernel, and the recovery kernel is the only place that the recovery kernel is visible from to write? So root access is not enough for a simple way of updating the whole OS partition.
tshoulihane said:
I'm guessing this updates the recovery kernel, and the recovery kernel is the only place that the recovery kernel is visible from to write? So root access is not enough for a simple way of updating the whole OS partition.
Click to expand...
Click to collapse
they might have blocked it on the new update as well, making it really hard to get revert.. but on previous editions you can easily write a new recovery.
the partition is visible at partition 7, but this might have changed.
i have not had the luxury to look at the actual update, so what is inside, is for me to find out.. then we get all the nasty details.
ok guys... anyone having installed this update pls kindly report the following:
1. stability status
(crashes freezez sod)
2. software issue - can sideloaded applications be installed and used?
3. root ability ?
4. 3d games like dangeon defenders working ?
5. custom flashing ability?
sader0 said:
ok guys... anyone having installed this update pls kindly report the following:
1. stability status
(crashes freezez sod)
2. software issue - can sideloaded applications be installed and used?
3. root ability ?
4. 3d games like dangeon defenders working ?
5. custom flashing ability?
Click to expand...
Click to collapse
1. no craches or freezing
2.3d games like the one mentioned should work has a charm
3.root ability yes
4.ability to sideloads apps not tested but should be fine since you can root its easily
5 custom flashing ability yes using adb to instal first the old kernel
basicly the tablets works has it was ment to be i think that toshiba might even suprise everyone by realeasing honeycomb for this tablet in future
When I go to Toshiba Service Station, there is no update available(using Dexters wonderful foliomod). How do I get to see it and if I want to install how do I keep all the wonderful stuff on it already. This is my wifes and not mine so she will get pissed off if she loses everything on it again?
Thanks.
go back to stock rom and update it should work
MCLP said:
2.3d games like the one mentioned should work has a charm
Click to expand...
Click to collapse
you will need build.prop changes to some games working, and gameloft is still the same as CPU has not changed..
MCLP said:
4.ability to sideloads apps not tested but should be fine since you can root its easily
Click to expand...
Click to collapse
So you can use market now
MCLP said:
5 custom flashing ability yes using adb to instal first the old kernel
Click to expand...
Click to collapse
guess how many users will ask how do it i think its a step backwards, and too complex for regulars...
MCLP said:
basicly the tablets works has it was ment to be i think that toshiba might even suprise everyone by realeasing honeycomb for this tablet in future
Click to expand...
Click to collapse
unless it got market, gmail and syncing support, its not like its meant to be yet..
and honeycomb will not appear as display is just 1024x600, so no chance of a google certification for folio100 here, same as with gapps support. so forgot toshiba solving that..
Saw people got honeycomb running on nook color with the same resolution screen... no certification does not mean that is not possible...so we still can have our fingers crossed on that
sader0 said:
Saw people got honeycomb running on nook color with the same resolution screen... no certification does not mean that is not possible...so we still can have our fingers crossed on that
Click to expand...
Click to collapse
i wrote: Toshiba do not deliver, that does not mean i can't
I don't doubt you can. But I guess this screen resolution difference could cause troubles in some apps again
Just read about the new update and the issues with it. I have my Folio sent in for repair and they always update to the latest firmware before sending back to customer, so it looks like im in deep ****. I know how to use adb and fastboot, use them all the time on my desire hd and my VEGA. Maybe someone could write a good guide on how to flash this old recovery and which of all the rooting procedures that works with the new firmware. I also dont know how to get Folio in fastboot. But if we have a working root we can flash the old recovery or clockwork recovery, is that right? Because if not i might as well throw it away. No use in trying to sell it, no one will buy a useless tablet anyways. HOPING FOR A GUIDE CALLED: HOW TO RESTORE YOUR FOLIO WITH FLASHABLE RECOVERY
Hi guys,
I'm about to pull the trigger on a nc, but need to have skyscape working for it to replace my current archos 101.
I have a link to the apk here, if someone could please install it and see if it runs.
Please also state which Rom you're using.
Cheers, thanks heaps in advance
Link: http://forum.xda-developers.com/attachment.php?attachmentid=510921&d=1297034453
(Tablet specific version)
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
liqn7 said:
Hi guys,
I'm about to pull the trigger on a nc, but need to have skyscape working for it to replace my current archos 101.
I have a link to the apk here, if someone could please install it and see if it runs.
Please also state which Rom you're using.
Cheers, thanks heaps in advance
Link: http://forum.xda-developers.com/attachment.php?attachmentid=510921&d=1297034453
(Tablet specific version)
Click to expand...
Click to collapse
One more thing: When launching Skyscape, you HAVE to be connected via wifi. If not, it will give you the message that the device ID is different or your device is in airplane mode. But once the initial open with wifi enabled, you can use it with wifi off. If you ever reboot, always connect the first time with wifi enabled.
Thanks for the reply.
Have you tried the apk in my opening post?
I think its a tablet specific version as I'm able to use it on my 101 without wifi and without an id. The one from the market for example doesn't work.
Could you please try it and see if it makes a difference?
Cheers
liqn7 said:
Thanks for the reply.
Have you tried the apk in my opening post?
I think its a tablet specific version as I'm able to use it on my 101 without wifi and without an id. The one from the market for example doesn't work.
Could you please try it and see if it makes a difference?
Cheers
Click to expand...
Click to collapse
I believe this is the same version I was using. I installed the apk and my paid resources were locked out. It asked me to reinstall the paid resources, but I just am restoring my system instead. Maybe you don't need the wifi to connect for non-paid resources? Your 101 must be generating some ID. Go into the software and click "about." It should show your device ID.
I've just double checked - my archos does indeed generate a stable ID.
However, I do have paid databases on their at the moment and don't need Wi-fi access upon start up... I wonder whats happening?
Do you think they'll fix it in CM7?
Have you tried running Android ID changer (on the market) to set/spoof an android device ID?
I believe the ID problem has been fixed, first by framework patch, and now in the nightlies. The problem is serious enough that I would expect it to most definitely be resolved by the time the Stable release arrives.
liqn7 said:
I've just double checked - my archos does indeed generate a stable ID.
However, I do have paid databases on their at the moment and don't need Wi-fi access upon start up... I wonder whats happening?
Do you think they'll fix it in CM7?
Have you tried running Android ID changer (on the market) to set/spoof an android device ID?
Click to expand...
Click to collapse
I thought it might be giving the problem without wifi because of subscription resources. I bought a four month subscription, so I thought that might be the programs way of checking online first before launching the paid subscription resource. Not sure, though. CM7 does appear to generate a device ID.
My nook is arriving next week
Has anyone had a chance to test skyscape out on the latest CM7 nightlies?
Also you're saying that it doesn't run on rooted stock eclair?
liqn7 said:
My nook is arriving next week
Has anyone had a chance to test skyscape out on the latest CM7 nightlies?
Also you're saying that it doesn't run on rooted stock eclair?
Click to expand...
Click to collapse
I downloaded the app from the market, created an account. I downloaded the free resources that were available and all seems well. It runs on a full screen.
.Update.....
I did not really read the op very well at first. I uninstalled the market app and installed your apk. Logged into the account that I created and it loaded fine. Actually, instead of 3 resources available for download, I had seven or eight with this version. Looks like it works. This is a great medical database. I am running cm7 nightly 12.
Any way to make it full screen
Is there any way to view skyscape with full screen at nook color? since only a tiny screen appears as if it is in a 3.5inch smartphone
kosei_inoue said:
Is there any way to view skyscape with full screen at nook color? since only a tiny screen appears as if it is in a 3.5inch smartphone
Click to expand...
Click to collapse
Go to the spare parts app and the option to run older apps in compatability mode. If it is on, toogle off and reboot. If it is off, toggle on and reboot. One or the other sequence works.
Thanks for the update mate
Skyscape is the bomb...especially once you load a few databases on there
Really interested to see if anyone could please try it on autonooted stock 2.1 though, as CM7 while awesome is still not as stable as I'd like at the moment.
sec6 said:
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
Click to expand...
Click to collapse
Is there any solution to get a fixed device ID in eclair- Im dying here!
sec6 said:
Using it on the froyo flashable rom. No problems. Skyscape is the only reason I'm sticking with the froyo rom. Tried it with the CM7 rom but since no device ID is created with this rom, it won't work. The eclair roms won't work as the device ID is created randomly. Skyscape needs a stable fixed ID. I imagine the ID issue with gingerbread will be worked out in the future.
Click to expand...
Click to collapse
Im now trying the froyo that runs off the sdcard but skyscape just crashes- logcat shows the error to be "cannot determine device identification"- I'm guessing my only option is to flash froyo?
EDIT- was using old version- working now!
Or CM7 as it looks to be more stable now
Arggh- just flashed froyo and still skyscape crashes on launch- logcat still lists error as "Cannot determine device identification"- what gives!!! any ideas?
EDIT- looks like I was using an old version- its running now
jimmyz said:
EDIT- looks like I was using an old version- its running now
Click to expand...
Click to collapse
Did you get your version from the market or from the apk I posted?
liqn7 said:
Did you get your version from the market or from the apk I posted?
Click to expand...
Click to collapse
from market- is there advantage with the one you posted?
jimmyz said:
from market- is there advantage with the one you posted?
Click to expand...
Click to collapse
Not sure. Mine is version 1.26. I used it previously as the one from the market didn't support tablets. They may have updated it now..not sure...