So far you have installed the android 4.1.2 could not upload CM10 or Backup android 4.0.3
the level of recovery, without the problems associated with networking, (no network coverage, operator and no IMEI)
It was necessary then upload soft 4.0.3 using KDZ.
From now on we do not need to install the firmware again from the computer,
Replacing the radio followed by the installation of
the file baseband from recovery:
Baseband for ICS V10C for Argentina P705G:
V10C for Argentina P705G
Baseband for ICS V10K:
V10k
Baseband for ICS V10J:
V10J
Baseband for JB V20A:
v20a
Baseband for JB V20A for Argentina P705G:
V20A for Argentina P705G
Baseband for JB V20D-EuropeOpen:
V20D-EuropeOpen
Baseband for JB V20E-PL:
V20E-PL
Baseband for JB V20E-GBR-UNITED-KINGDOM:
V20E-GBR-UNITED-KINGDOM
Baseband for JB V20F-Spain:
V20F-Spain Orange
Baseband for JB V20B-Philipines:
V20B-Philipines
Baseband for JB V20B-Indonesia:
V20B-Indonesia
Baseband for JB V20H-France:
V20H-France Orange
Baseband for JB V20B-Africa:
V20B-Africa
If you have android 4.1.2 and install CM10 based on android 4.0.3 and do not have the range and the operator
This baseband install the ICS
If you have android 4.0.3 and install rom based on android 4.1.2
we do not have the range and the operator to install the baseband of JB
Copy the file to your phone, can be copied to a memory card
Start the phone in recovery and make instal CWM zip from externalSD
We do Wipe Cache and Wipe Dalvik Cache
The phone.
BASEBAND install after installing rom
Link for my work in Polish forum
Forum Android com Pl
Do I just need to flash this through CWM?
brambram said:
Do I just need to flash this through CWM?
Click to expand...
Click to collapse
Yes
Update 1 post - basbands v10c and v20a for Argentina.
Hello i have an P700 its currently stock with 4.03 and the software version is VC10F-J502012. I want to upgrade to the [L7][ROM][4.3.1][JLS36G][BETA 2.1] Unofficial CyanogenMod 10.2.
Im a little confused, which baseband i actually need? I guess because i live in Europe this --> Baseband for JB V20D-EuropeOpen
razzor1984 said:
Hello i have an P700 its currently stock with 4.03 and the software version is VC10F-J502012. I want to upgrade to the [L7][ROM][4.3.1][JLS36G][BETA 2.1] Unofficial CyanogenMod 10.2.
Im a little confused, which baseband i actually need? I guess because i live in Europe this --> Baseband for JB V20D-EuropeOpen
Click to expand...
Click to collapse
yes ! V20D "europe open" is good for you !
it work with all others V20 too ..... but not "optimised" , i don't know in "detail" what are exactly the difference between these baseband ...
razzor1984 said:
Hello i have an P700 its currently stock with 4.03 and the software version is VC10F-J502012. I want to upgrade to the [L7][ROM][4.3.1][JLS36G][BETA 2.1] Unofficial CyanogenMod 10.2.
Im a little confused, which baseband i actually need? I guess because i live in Europe this --> Baseband for JB V20D-EuropeOpen
Click to expand...
Click to collapse
Flash V20f for Spain, for Poland its also work and its new :good:
szymel0 said:
Flash V20f for Spain, for Poland its also work and its new :good:
Click to expand...
Click to collapse
And what baseband version do you recommend here in south east Asia? Do you have one?
Sent from my LG-P700 using Tapatalk
vaikz said:
And what baseband version do you recommend here in south east Asia? Do you have one?
Sent from my LG-P700 using Tapatalk
Click to expand...
Click to collapse
Give mi your country and i do for you :good:
szymel0 said:
Give mi your country and i do for you :good:
Click to expand...
Click to collapse
Philippines.
Thanks in advance.
Sent from my LG-P700 using Tapatalk
@up
Baseband for JB V20B-Philipines:
V20B-Philipines
szymel0 said:
@up
Baseband for JB V20B-Philipines:
V20B-Philipines
Click to expand...
Click to collapse
Thanks.
Do you have any idea what the diff between these baseband? Is it something about this baseband is optimized to the frequencies being used on each countries?
Sent from my LG-P700 using Tapatalk
@up
Yes i think so
Brazlilian Baseband
Hey my friend, I saw thread and maybe you can help me, I upgrade my nieces phone from stock Ice Cream to KK Vanir, everything went fine, apart my network signal (no signal).
Could you point me which baseband I should flash to fix it?
Country Brazil.
mobile: L7 P705
ROM: Vanir 4.4.2 KK
CWM: 602
cheers!
d.terenzzo said:
Hey my friend, I saw thread and maybe you can help me, I upgrade my nieces phone from stock Ice Cream to KK Vanir, everything went fine, apart my network signal (no signal).
Could you point me which baseband I should flash to fix it?
Country Brazil.
mobile: L7 P705
ROM: Vanir 4.4.2 KK
CWM: 602
cheers!
Click to expand...
Click to collapse
You can flash any v20 baseband. But if you have problem, you can request op for baseband foot your country.
Sent from my LG-P700 using Tapatalk
Update 1 post
Baseband for JB V20H-France:
V20H-France Orange
szymel0 said:
Update 1 post
Baseband for JB V20H-France:
V20H-France Orange
Click to expand...
Click to collapse
Thank you very very much !!! my friend ...
Can I have Baseband for JB V20 for Hong Kong?
thanks
z1022 said:
Can I have Baseband for JB V20 for Hong Kong?
thanks
Click to expand...
Click to collapse
Yes I will Later do upload for You
V20C_Hong_Kong
Thanks
Related
Would anybody be kind enough to post a recent modem for the I9100G? I've flashed SuperROM v3.0 so the ROM and kernel are pretty up to date, the only thing is my Baseband is still at DZKL3. I'm looking for anything newer, basically LA2, LB1 LC1 or LC2.
Thanks in advanced.
Actually better use baseband that updated for ur country..if u r from malaysia..better stay with dzkl3
Sent from my GT-I9100G
Yes, I'm from Malaysia, but I don't think DZKL3 is even for Malaysia. I downloaded it somewhere. Seems to work fine. I don't think there's much different between the country builds. I just would like to have the most recent modem if available.
aidfarh said:
Yes, I'm from Malaysia, but I don't think DZKL3 is even for Malaysia. I downloaded it somewhere. Seems to work fine. I don't think there's much different between the country builds. I just would like to have the most recent modem if available.
Click to expand...
Click to collapse
I try few modem (came with different ROM), end up I flash back our local modem - DZKL3 as it work the BEST!
DZKL3 is local modem from local recent ROM.
hi Andrewtst,
i need source to download modems for our device i9100G.
i flashed LB1 but i think there is something wrong i cant connect data connection when using 2G.
so i need KK1 for Saudi Arabia or Egypt it's all working well when i used it.
Sent from my GT-i9100G
GalaxyRom v5.1
Lucifer 1.54
Using Tapatalk
aidfarh said:
Yes, I'm from Malaysia, but I don't think DZKL3 is even for Malaysia. I downloaded it somewhere. Seems to work fine. I don't think there's much different between the country builds. I just would like to have the most recent modem if available.
Click to expand...
Click to collapse
I have experience with latest lb1 modem..its bad in malaysia..and had flash back to dzkl3..just sharing my experience here..feel free to try it..another way to get the modem u needed is by flashing the whole stock firmware downloded through sammobile.com
Sent from my GT-I9100G
Using DZKL3 and its working good
Here are list of different modems for you to try tho
I9100G KL3 Modem
http://www.mediafire.com/?3wq4n1tsb1b0typ
I9100G KJ2 Modem
http://www.mediafire.com/?msmtcrgdd3ggqfs
I9100G KK1 Modem
http://www.mediafire.com/?hmfutwb3h087fck
Credits to Hanny Liu.
Thanks for all the feedback. I guess I'll just stick with DZKL3 modem.
Sent from my GT-I9100G using XDA
Hi,
can anyone give me a source for the DZKL3 modem please ?
greetz
Can anyone provide source to download KL4 modem for i9100GJPLC1_9100GXXKL4 KSA
Sent from my GT-9100G using Tapatalk
GalaxyRom v5.1 Lucifr1.6 300mhtz
Is the KL4 modem the newest one ?
Please give source !!!
So Malaysia use DZKL3??
or KL4? any sauce?
Here you go : (i can't post link, so , improvise)
foonode dot net/file/oxBZ
KL4 modem for i9100G. I'm using one in Singapore and connection/data is reliable and no issues.
komarov74 said:
Is the KL4 modem the newest one ?
Please give source !!!
Click to expand...
Click to collapse
currway said:
Here you go : (i can't post link, so , improvise)
foonode dot net/file/oxBZ
KL4 modem for i9100G. I'm using one in Singapore and connection/data is reliable and no issues.
Click to expand...
Click to collapse
Somebody could tell me which modem is better for french user with FREE operator please ?
Cordially.
request for i9100g modem file
hi guysss...am using i9100G S2 mobile belongs to india..when am try to update cyanogen mod ,it corrupts my device modem file
now i am regain to samsung official jelly bean but my network does not work..pls suggest some ideas and DDLS2 modem file
thank u
regards
chandran
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
*#1234# does not work ?!
Ok, usually the PDA is the same as the Build version/number => DXLP9.
Maybe you have to reflash the kernel or the whole ROM to get the *#1234# work again on your phone.
Dial codes will only work only stock Samsung ROM's. With it being “build 4.2," I'll assume it isn't a stock Samsung ROM. Flash one if you wish to use these dial codes.
Sent from my GT-I9100 using Tapatalk 2
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
deleted
Sun90 said:
well ur PDA is DXLP9 same as ur baseband
u mean u want to try the jkay framewrk mod, if so u have to dwnld the one made for DXLP9 and flash the same and not any other build one
Click to expand...
Click to collapse
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
nickxxxx;is749702 said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I910DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Anyone else this this looks unusual?
Android Version: 4.0.3
Baseband Version: I9100XXKI3
Build Number: XWLPG V5.1.2
Click to expand...
Click to collapse
SwannyBhoy said:
Anyone else this this looks unusual?
Click to expand...
Click to collapse
Not really. Looks like a Gingerbread modem was flashed to an ICS firmware. That is only unusual in that it would never come like that packaged from Samsung. But it still should work just fine. Modems are cross compatible between Gingerbread and ICS.
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
.
Click to expand...
Click to collapse
well thank u for correcting me ma8
edited my post for the same
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Click to expand...
Click to collapse
Okay... got it.. also Jkay works with stock roms or custom roms which have support for it and i dont think that slim ics support it as of yet.
Thanks.
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
mr_fing3rs said:
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
Click to expand...
Click to collapse
Of course, please try to just search because there are several guides to tell you how. But why not upgrade to official 4.0.4?
Sent from the Matrix
mr_fing3rs said:
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
Click to expand...
Click to collapse
Ofcourse there is. Just flash a 2.3.x rom
Sure but WHY would you wanna go back to Gingerbread?! You can just root your phone and install CyanogenMod 7.1 or a similar 2.3.4 based ROM although I really can't understand why you'd wanna do that.
bi11ie said:
Sure but WHY would you wanna go back to Gingerbread?! You can just root your phone and install CyanogenMod 7.1 or a similar 2.3.4 based ROM although I really can't understand why you'd wanna do that.
Click to expand...
Click to collapse
Why wouldnt he.I run GB too.
Donnie Sins said:
Of course, please try to just search because there are several guides to tell you how. But why not upgrade to official 4.0.4?
Sent from the Matrix
Click to expand...
Click to collapse
4.0.4 is not available in Lithuania and i can't find a Baltic SEB 2.3.x ROM
mr_fing3rs said:
4.0.4 is not available in Lithuania and i can't find a Baltic SEB 2.3.x ROM
Click to expand...
Click to collapse
You may flash any country's stock ROM. It doesn't matter. However, make sure that the ROM isn't branded. That's all. To get the roms, go to www.sammobile.com, sign up for free, and enter your phone details. Choose any country, e.g. any European unbranded firmware.
Sent from my GT-I9100 using Tapatalk 2
Hi I am too form Lithuanian write me pm...
Merry christmas and Happy new year
Paulius
theunderling said:
Why wouldnt he.I run GB too.
Click to expand...
Click to collapse
Well, ICS is significantly better than GB. Google did an amazing job. Stock ICS looks gorgeous, is very responsive and more functional.
once you go up...you never go down........
Hey guys I'm a noob here and I need the i9300 xxddlk1 zip for clockworkmod, my problems started when I flashed omega rom it changed my baseband to the EU one, I was able to find the Indian baseband for my device but it was the old xxdlib baseband for 4.1.1, now I need the new baseband and ril xxdlk1 can you please get me a clockworkmod flash able zip of the xxdlk1 l baseband and ril I am currently running paranoid android 3 4.2.1 so is it fine if I use the old baseband? WiFi works fine, but I'm scared that when I get a Sim card it won't work please help!!
mumbai52 said:
Hey guys I'm a noob here and I need the i9300 xxddlk1 zip for clockworkmod, my problems started when I flashed omega rom it changed my baseband to the EU one, I was able to find the Indian baseband for my device but it was the old xxdlib baseband for 4.1.1, now I need the new baseband and ril xxdlk1 can you please get me a clockworkmod flash able zip of the xxdlk1 l baseband and ril I am currently running paranoid android 3 4.2.1 so is it fine if I use the old baseband? WiFi works fine, but I'm scared that when I get a Sim card it won't work please help!!
Click to expand...
Click to collapse
Modem/ Ril threads .
jje
@jje I tried the ril/modem threads that's where I got the old baseband from they don't have the new baseband, please help I tried looking everywhere for a clockwormod flash able zip!! They have every baseband for 4.1.2 except my Indian baseband. Also another question I had was is it OK to use the old modem or will I face problems
Sent from my GT-I9300 using xda app-developers app
mumbai52 said:
@jje I tried the ril/modem threads that's where I got the old baseband from they don't have the new baseband, please help I tried looking everywhere for a clockwormod flash able zip!! They have every baseband for 4.1.2 except my Indian baseband. Also another question I had was is it OK to use the old modem or will I face problems
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Just wondering if it's possible to extract the modem from the firmware and flash it with Odin or mobile Odin?
I was also wondering, I made a nandroid backup of my original 4.1.2 ROM the only problem is it's on the new baseband which I don't have, will it cause any no baseband errors? Please help!!!???
Sent from my GT-I9300 using xda app-developers app
Yu can pull a modem and flash it .
Or download a cwm zip modem and replace the modem inside .
RIL possibly use GetRil from the market .
JJE
I'm now using leaked firmware 12\12\2013 open europe by the way i'm 4m egypt , and now i wanna downgrade to 4.1.2 i already backed up efs on 4.3 jb rom shall now i install 4.1.2 or i shoul do any other steps .
another question is swiss 26\12\2013 4.3 the most stable and fast rom or if it is not , what else is good
ahmedhels3iiidy said:
I'm now using leaked firmware 12\12\2013 open europe by the way i'm 4m egypt , and now i wanna downgrade to 4.1.2 i already backed up efs on 4.3 jb rom shall now i install 4.1.2 or i shoul do any other steps .
another question is swiss 26\12\2013 4.3 the most stable and fast rom or if it is not , what else is good
Click to expand...
Click to collapse
and began to leave 4.3 official few days ago. if you downgrade to 4.1.2 can install a modem having supeior mg4 or so you would not have problems imei.
ahmedhels3iiidy said:
I'm now using leaked firmware 12\12\2013 open europe by the way i'm 4m egypt , and now i wanna downgrade to 4.1.2 i already backed up efs on 4.3 jb rom shall now i install 4.1.2 or i shoul do any other steps .
another question is swiss 26\12\2013 4.3 the most stable and fast rom or if it is not , what else is good
Click to expand...
Click to collapse
If u did not back up ur efs before u flash 4.3, it is useless. Not entirely useless but useless at this situation.
Sent from my GT-I9300 using xda app-developers app