Related
If you see this on Modaco, apols.
Hi folks, just picked one of these up for the £149 in Orange, but have a problem with wi-fi that I have had with a few WM devices over time, think its the AR6000 wlan chipset myself, seems very fussy about what and when it connects.
I would appreciate any help, but not please along the lines of "change your router", that ain't happening, it works fine with loads of other devices, so if this issue is non solveable, its the TG01 that goes!
OK, first connection to the Router (its a Billion ADSL) was fine, got connection, worked OK. From there in, as soon as it woke up, no dice, just unable to connect, always shows up in both WM and Tosh wireless util as available, just never connects.
Now, what I have noticed with this and at other times when I have had this issue with past devices is that it puts some odd stuff in the IP address field in the Configure Networks Adaptors screen.
I have it set for Use Server Assigned IP Address, but in the field below, I get this odd stuff fe80:221:e8ff:fe88 instead of 192.xxx.xxx.xxx that should be in there. I am sure this is somehow related to my connection issues, but searching the web, seems like noone else ever had this?
Kev
can u turn ur wifi off ?
and can u turn it back on ?
Yep, turns on and off no problem, even done hard reset to see if I can get that fresh connection, but no way.
That is your IP. You need to configure it with get automatic IP or put you the IP but is more complicated.
This problem have origin be tween router and mobile or pc. Some time routers didn't assign an IP address.
Some time have other origin is a key try to put the key in different form AES or TKIP nbest one TKIP.
Check to security type.
kevwright said:
I have it set for Use Server Assigned IP Address, but in the field below, I get this odd stuff fe80:221:e8ff:fe88 instead of 192.xxx.xxx.xxx that should be in there.
Click to expand...
Click to collapse
That looks like an IPv6 address as opposed to an IPv4 address, so I guess your router must be using IPv6. Does it not do this for your other devices? Maybe your router's DHCP serves up an IPv6 address because it detects that the TG01 can handle it. What happens when you try to do something meaningful on the network?
try and change your router security from wep (i assume it is due to a problem i have) and that seems to solve it,did for me neway and you are probably right about the chipset,
bojan6 said:
That is your IP. You need to configure it with get automatic IP or put you the IP but is more complicated.
This problem have origin be tween router and mobile or pc. Some time routers didn't assign an IP address.
Some time have other origin is a key try to put the key in different form AES or TKIP nbest one TKIP.
Check to security type.
Click to expand...
Click to collapse
Is it an IP address, all my other devices show 192.168.xxx.xxx, not seen that format before.
Checked the AES/TKIP thing, and tried both to no effect.
Also tried to set a static IP, but no dice.
Kev
paroariax said:
That looks like an IPv6 address as opposed to an IPv4 address, so I guess your router must be using IPv6. Does it not do this for your other devices? Maybe your router's DHCP serves up an IPv6 address because it detects that the TG01 can handle it. What happens when you try to do something meaningful on the network?
Click to expand...
Click to collapse
Hrmm, IPv6 address looks like
2001:0db8:3c4d:0015:0000:0000:abcd:ef12
Which is not really what I have, and nothing else uses it, in fact can not see any reference to IPv6 on the router.
Kev
useyourfist said:
try and change your router security from wep (i assume it is due to a problem i have) and that seems to solve it,did for me neway and you are probably right about the chipset,
Click to expand...
Click to collapse
Security is WPA2-PSK, which to be fair works on lots of other devices, and I don't really wanna mess with them
Kev
Put your configuration here and lets check if we have the same.
I have a similar issue using a Siemens Gigaset SE587 ADSL router at home with the wireless security set to WPA/WPA2 - it will happily connect me once, but subsequent attempts fail unless I reset the router. Other access points are fine. For example, there is a BTOpenZone router not far outside that I can connect to at will, with no problem. Also, the router we use at work happily embraces the TG01's desire to connect.
The SE587 has been a bit temperamental with certain other devices so I wonder if the issue is the slightly fussy router rather than the phone?
Oh well .. I'm picking up a second hand Belkin 54g router soon, so hopefully this will solve it.
Ok guys this problem how I said his origin is to not assign one IP address correctly. This problem is because of WPA2 crypt key.
Turn of your security in your router and try to connect and lets start talk then.
that address (the numbered one) looks like a mac address, if you log on to your router, set up a rule with that mac address and/or ip addres (try 192.168.0.4, its usually free unless you have more than 4 connected devices, if you have then up the 4 to a 6) and restart the connection
it may help or it may do nothing or i might be wrong
I have recently returned to my apartment with my brand new archos 70. I use WPA2-PSK encryption for my wifi network. at first everything was golden, I could browse the web and whatnot just fine. as of a few days ago, wifi has not been working correctly. my device connects to the network (pulls an ip address from the router) but when I try to browse web pages or open web based apps they hang up and act as if I have no connection. it works fine on other networks (to limit the problem to my network) I have tried doing a factory reset of the device, tried power cycling my router and modem with no luck. I have also changed encryption types to no avail. i have the latest firmware for the gen 8 series. also from time to time during this session of events, sometimes it will connect to the router, then disconnect and reconnect. I have no clue whats going on because I havent changed any router settings since I got back. the only other devices on my wifi network are two laptops. any help would be appreciated.
you mean you restored to the factory settings ran through the start up all over again and it still won't connect to your router? have you tried any other types of connections or routers?
I had this problem just the other night was this close to reformatting the whole thing. but I solve the problem by turning the device off, then holding the reset button while it rebooted to turn it off again, an reinitializing the drivers.
how do you reinitialize the drivers? I did a factory wipe. and it connects, it shows as having network connectivity (even my router lists it as a dhcp client and currently making use of the access point) but no internet functions work. ive connected to other networks fine.
This happened to me when I first got my A70. What I had to do to fix it (after getting incredibly pissed, reformatting twice, and almost returning the thing) was to set it up to use a static IP address on my home wifi network. Don't know if it'll solve your problem, but it works beautifully for me and I'm able to enjoy the device now.
Just remember to uncheck "use static IP address" when you get on other wifi networks.
well, I set up static addressing, gave it a private ip, set up the gateway and dns, and it still wont connect to anything.
If set as wireless N, set as N+G or G only, latest firmware may have trouble connecting to wireless N networks.
na, I dont have it set to n, I have it set to auto which I believe puts it to g with my archos. thing is, it used to work. now it suddenly has problems.
Im beginning to wonder if the archos tablets are just picky about wireless routers. I wouldnt think so...
Upgrade the firmware
Archos published a firmware upgrade to solve this problem (December 2010). The related bug in the release notes is...
Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
The new firmware download link is in the Archos website.
you can download the firmware to your computer, copy it to the root directory of the tablet using the USB cable, and run the upgrade process in the tablet.
... or you can use another WiFi network (without WPA2/AES) and download the update in the same tablet
Note: I cannot send the links, however you can use the information to search the links in the internet.
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
I have had a Netgear Powerline Adapter system set up in my Bedroom (XAVNB2001) for the past year and a half, because the signal from my Cisco E4200 doesn't effectively reach up there. It has its own SSID, on the 2.4GHz band. It has been completely solid and reliable, and I use it all the time with my Verizon Samasung Galaxy Nexus (stock ROM 4.2.2), and Asus Infinity Tablet (stock ROM 4.2.1). My wife also used it without problem with her prior Motorola Droid 3.
But for reasons I can't identify, my wife's new Galaxy S4 won't connect to it. Also Stock ROM 4.2.2. Her phone sees the Adapter/SSID, and shows a strong signal when we're up there. I enter the passcode with the same encryption (WPA/WPA2 PSK) as I have on the other working devices, and it quickly goes to "Acquiring IP" but this never completes. It tries a couple of times, and usually ends up saying: "Network Disabled Because Internet Connection Is Slow." But it is not slow - works as fast with the other devices as when I'm connected to the Cisco downstairs near the Router. I have carefully entered the passcode (checking the box to show the characters to make sure I'm not putting in a typo) a dozen times.
There is no problem connecting her S4 to any other WiFi network we've encountered (to the Cisco downstairs directly, at my kids' houses, hotels, etc.).
I can't see any trouble-shooting steps to even identify the problem. Usually this is a no-brainer: you see the SSID, enter the passcode, and you're in. What could possibly be the problem here??
DLCPhoto said:
I have had a Netgear Powerline Adapter system set up in my Bedroom (XAVNB2001) for the past year and a half, because the signal from my Cisco E4200 doesn't effectively reach up there. It has its own SSID, on the 2.4GHz band. It has been completely solid and reliable, and I use it all the time with my Verizon Samasung Galaxy Nexus (stock ROM 4.2.2), and Asus Infinity Tablet (stock ROM 4.2.1). My wife also used it without problem with her prior Motorola Droid 3.
But for reasons I can't identify, my wife's new Galaxy S4 won't connect to it. Also Stock ROM 4.2.2. Her phone sees the Adapter/SSID, and shows a strong signal when we're up there. I enter the passcode with the same encryption (WPA/WPA2 PSK) as I have on the other working devices, and it quickly goes to "Acquiring IP" but this never completes. It tries a couple of times, and usually ends up saying: "Network Disabled Because Internet Connection Is Slow." But it is not slow - works as fast with the other devices as when I'm connected to the Cisco downstairs near the Router. I have carefully entered the passcode (checking the box to show the characters to make sure I'm not putting in a typo) a dozen times.
There is no problem connecting her S4 to any other WiFi network we've encountered (to the Cisco downstairs directly, at my kids' houses, hotels, etc.).
I can't see any trouble-shooting steps to even identify the problem. Usually this is a no-brainer: you see the SSID, enter the passcode, and you're in. What could possibly be the problem here??
Click to expand...
Click to collapse
You could try creating a static IP address using the MAC of the GS4 on your Cisco router. It sounds like it's authenticating, but unable to assign an IP for whatever reason.
Disable WiFi Multimedia (WMM) or the equivalent... BOOM! should work fine.
Also, if it's a MAC filter issue turn your MAC filtering off. If that is the issue your GS4 will connect instantly once MAC filtering is off.
Thanks for the replies.
I assigned a Static IP to the GS4 through the Router without difficulty. I then went to the GS4's settings for this SSID, changed it to Static IP, entered the assigned IP, kept the Gateway as 192.168.1.1, and changed the DNS settings to what is shown through IPCONFIG when I check my Desktop.
It now connected, but shows a DNS error when trying to go to a given website. So something funky is going on there. The phone shows a setting for "Network prefix length" and has a value of 24 - I've not encountered this before - should there be a different setting here?
There is no MAC filtering enabled, so that's ok.
"Disable WiFi Multimedia (WMM) or the equivalent" - where is this setting located? I don't see anything along those lines on the Phone, or in the Router's program??
DLCPhoto said:
Thanks for the replies.
I assigned a Static IP to the GS4 through the Router without difficulty. I then went to the GS4's settings for this SSID, changed it to Static IP, entered the assigned IP, kept the Gateway as 192.168.1.1, and changed the DNS settings to what is shown through IPCONFIG when I check my Desktop.
It now connected, but shows a DNS error when trying to go to a given website. So something funky is going on there. The phone shows a setting for "Network prefix length" and has a value of 24 - I've not encountered this before - should there be a different setting here?
There is no MAC filtering enabled, so that's ok.
"Disable WiFi Multimedia (WMM) or the equivalent" - where is this setting located? I don't see anything along those lines on the Phone, or in the Router's program??
Click to expand...
Click to collapse
I'm not sure about Eric214's suggestion, but it sounds like it could help. Regarding the static IP, if you set it on the router, the phone should pick it up automatically without you needing to enter it manually. After you set the static IP on the router, does the phone still hang on Acquiring IP? If you HAD to manually enter, you could plug in the DNS address coming straight from your router, or Google's open-dns of 8.8.4.4 and 8.8.8.8 (I think that still works.)
ttupa said:
I'm not sure about Eric214's suggestion, but it sounds like it could help. Regarding the static IP, if you set it on the router, the phone should pick it up automatically without you needing to enter it manually. After you set the static IP on the router, does the phone still hang on Acquiring IP? If you HAD to manually enter, you could plug in the DNS address coming straight from your router, or Google's open-dns of 8.8.4.4 and 8.8.8.8 (I think that still works.)
Click to expand...
Click to collapse
I tried it before, but tried it again - with the Static IP set up on the Router (using the "DHCP Reservation" option in the Router's program), and the Connection Settings on the GS4 for this SSID set to DHCP, all advanced settings at their default, it behaves the same way: Shows Acquiring IP, tries it twice, then shows the message I quoted above.
The Router remains set at Automatic Configuration/DHCP overall, with DHCP Reservation used to create a Static IP for this phone's MAC address. If this isn't the proper way to do this, let me know.
And with the Phone Settings for this SSID's WiFi set to Static IP, and the info entered as above, it quickly connects, but doesn't gain internet access.
It shouldn't be this hard. This is usually a no-brainer, as I first indicated. What is so different with this phone's WiFi setup??
I appreciate your input!
DLCPhoto said:
I tried it before, but tried it again - with the Static IP set up on the Router (using the "DHCP Reservation" option in the Router's program), and the Connection Settings on the GS4 for this SSID set to DHCP, all advanced settings at their default, it behaves the same way: Shows Acquiring IP, tries it twice, then shows the message I quoted above.
The Router remains set at Automatic Configuration/DHCP overall, with DHCP Reservation used to create a Static IP for this phone's MAC address. If this isn't the proper way to do this, let me know.
And with the Phone Settings for this SSID's WiFi set to Static IP, and the info entered as above, it quickly connects, but doesn't gain internet access.
It shouldn't be this hard. This is usually a no-brainer, as I first indicated. What is so different with this phone's WiFi setup??
I appreciate your input!
Click to expand...
Click to collapse
That sounds exactly right to me, and you're right that it shouldn't be that difficult. I've heard others report of miscellaneous routers that don't play nice with our phone. In this case, it's an AP, but that might still be the issue. I haven't personally experienced the problem, so hopefully someone else can chime in who has.
ttupa said:
That sounds exactly right to me, and you're right that it shouldn't be that difficult. I've heard others report of miscellaneous routers that don't play nice with our phone. In this case, it's an AP, but that might still be the issue. I haven't personally experienced the problem, so hopefully someone else can chime in who has.
Click to expand...
Click to collapse
Does anybody else have any ideas here?
I have also posted on Netgear and Verizon's forums, but am not expecting too much from either of these. I'm putting my money on the expertise here at XDA!
WMM is listed under the advanced settings of your router, it's not phone based but in your router. Disable it and return your other settings to normal and it should fix your problem.
Eric214 said:
WMM is listed under the advanced settings of your router, it's not phone based but in your router. Disable it and return your other settings to normal and it should fix your problem.
Click to expand...
Click to collapse
I'll have another look in the morning but earlier today I looked through every page of settings and didn't see anything that looked or sounded like this.
What section or function might you expect it to be found? What else might it be called?
Thanks.
Advanced settings in your router.
Basically, the 802.11n spec requires devices to support 802.11e (Quality of Service [QoS] enhancements for wireless LAN) in order to use HT (High Throughput) link rates, i.e. higher than 54 Mbps. (WMM is a subset of 802.11e that was created by the Wi-Fi Alliance as a stop-gap measure while 802.11e made its way slowly through the IEEE review process.)
The point is this is an issue for the GS4 as it's either firmware related or a Samsung issue they didn't realize they caused. Point being, if you have constant disconnects to your router, disabling WMM should make your connection "stick". At this point its what you may have to do until a firmware update for the router is released or Samsung releases an OTA update fix. Unless you're rolling 3+ devices at the same time streaming content you shouldn't have an issue running 54mbps. I stream full HD content to 2 devices at the same time with no lags or decompression issues at 54mbps.
As long as your phone has a static IP from the router there is no reason to set the DNS on the S4...the router does all the DNS routing for your devices. Hopefully that'll fix your DNS error issue.
Sent from my SCH-I545 using Tapatalk 2
OK - had another look at the Router settings, and found the WMM option in the QoS section. I somehow overlooked that yesterday. I'll try this out later today when I'm at home.
Eric214 - with respect to this WMM setting, I have a Panasonic SmartTV, and stream Netflix, Amazon Video, Vudu, etc. and can get the highest quality (1080p) through these. Is changing this setting going to impair throughput for this purpose?
chrishoyt2012 - after changing to Static IP, if I did nothing on the phone (that is, kept it at DHCP), it didn't fix the problem. I then selected Static IP on the phone, which necessitated inputting DNS. There were DNS server entries there by default, and these didn't work, so I manually changed them to my ISP's DNS that are used on my Desktop.
What should I be doing in this regard, other than what I have tried above?
Thanks!
Well, I disabled WMM Support, but nothing changed. It still failed to get an IP Address, same as I described in my original post.
No replies in the other forums either.
I'd really like to get this going - I'm also considering getting the S4, but this may cause some second thoughts...
I went into the Netgear Adapter's setup program, but couldn't fix the problem there either.
I tried different Channels, and a few other settings changes, but no joy.
There was a WMM setting there, but it was checked, and greyed out, so I couldn't try unchecking it even if I wanted to. I disabled WMM on the Router again, but this option remained unavailable on the Adapter's setup program.
I went into my Router, and deleted the IP address for the S4, to try and 'reset' it, but still no change. The S4 shows 'failed to acquire IP' every time.
Any other ideas?? I also tried my daughter's Razr HD, and it connected fine, just like the others. What is so different about the S4's WiFi connectivity??
I've just gotten a Moto G Power. I have kids, so my router's parental controls are set up to alert me of new devices joining the home network so I can give them appropriate permissions.
My new phone is constantly connecting with different MAC addresses, causing me to get spammed with alerts. I changed all the home WiFi networks on the phone to "Use Device MAC", but it doesn't seem to make any difference. It's still using random MACs and there's no device connected to the router with the "real" MAC of the phone.
Anyone have any suggestions?
update...seems okay now
I just checked my router and it's showing the expected device MAC rather than a random one. Maybe it just took a while for something to time out or something. Weird.