htc one x+ On fastboot only - HTC One X+

dear,
my phone is shutdown without rom only recovery mode (( i don't have system for my phone i don't know what is problem ))
i need rom to my phone (( official & RUU ))
my phone details
CID: HTC__J15
ENRC2B_U PVT SHIP S-ON RL
HBOOT-1.35.0000
CPLD-None
MICROP-None
RADIO-3.1204.168.32
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW Secure boot : enable
MODEM PATH : OFF
:crying::crying::crying::crying::crying::crying::crying::crying:crying::crying::crying::crying::crying::crying::crying:

himoo2277 said:
dear,
my phone is shutdown without rom only recovery mode (( i don't have system for my phone i don't know what is problem ))
i need rom to my phone (( official & RUU ))
Click to expand...
Click to collapse
i don't know which RUU you need for your CID, so i recommend you read this:
http://forum.xda-developers.com/showthread.php?t=2213910
and this:
http://forum.xda-developers.com/showthread.php?t=2066390
in depth and you should know how to get a stock like custom rom onto your phone

in depth and you should know how to get a stock like custom rom onto your phone [/QUOTE]
ok, but i still need international version for my phone how i get it (( until to buy ))
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

himoo2277 said:
in depth and you should know how to get a stock like custom rom onto your phone
Click to expand...
Click to collapse
ok, but i still need international version for my phone how i get it (( until to buy ))
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:[/QUOTE]
Everything is written on the thread reaper has mentioned.
However if you are on hboot 1.40, you are out of luck (like me...). Because there is no RUU for hboot 1.40

Everything is written on the thread reaper has mentioned.
However if you are on hboot 1.40, you are out of luck (like me...). Because there is no RUU for hboot 1.40[/QUOTE]
sorry, not work i don't no what wrong??
this message
C:\Android>fastboot flash zip PG86IMG_1.40-hboot.zip
sending 'zip' (351 KB)...
OKAY [ 0.055s]
writing 'zip'...
FAILED (remote: 99 unknown fail)
finished. total time: 0.163s

himoo2277 said:
Everything is written on the thread reaper has mentioned.
However if you are on hboot 1.40, you are out of luck (like me...). Because there is no RUU for hboot 1.40
Click to expand...
Click to collapse
sorry, not work i don't no what wrong??
this message
C:\Android>fastboot flash zip PG86IMG_1.40-hboot.zip
sending 'zip' (351 KB)...
OKAY [ 0.055s]
writing 'zip'...
FAILED (remote: 99 unknown fail)
finished. total time: 0.163s
[/QUOTE]
What the hell are you trying to do??? As far as I understood your problem, you should simply install recovery and rom as described in the tutorials...
Sent from my HTC One X+ using xda app-developers app

reaper90 said:
sorry, not work i don't no what wrong??
this message
C:\Android>fastboot flash zip PG86IMG_1.40-hboot.zip
sending 'zip' (351 KB)...
OKAY [ 0.055s]
writing 'zip'...
FAILED (remote: 99 unknown fail)
finished. total time: 0.163s
Click to expand...
Click to collapse
What the hell are you trying to do??? As far as I understood your problem, you should simply install recovery and rom as described in the tutorials...
Sent from my HTC One X+ using xda app-developers app[/QUOTE]
As you are on hboot 1.40 - you can not use RUU as I have already said.
You need to get a custom ROM installed.

You can't fastboot flash the rom.zip, we don't have S-off. Just connect your phone in fastboot mode and run the RUU as normal.
Sent from my HTC One X+ using Tapatalk 4 Beta

AndroHero said:
You can't fastboot flash the rom.zip, we don't have S-off. Just connect your phone in fastboot mode and run the RUU as normal.
Sent from my HTC One X+ using Tapatalk 4 Beta
Click to expand...
Click to collapse
He can't as there is no RUU available for hboot 1.40

Addicted2xda said:
He can't as there is no RUU available for hboot 1.40
Click to expand...
Click to collapse
His only other option then, is to flash TWRP and sideload a custom rom. Not my fave option as sideloading is temperamental at best lol
Sent from my HTC One X+ using Tapatalk 4 Beta

Related

Problem Unlock, help me please

Forgive if not the place...
I have a problem. I can not unlock bootloader.
When I type "fastboot flash unlocktoken Unlock_code.bin" It answers "sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...FAILED (remote: unlock token check failed) finished. total time: 0.150s" I have tried reinstalling the drivers and doing it in different pc get the same result.
I configured it correctly repeatedly...
Help please. Thank you, very much.
raa_ said:
Forgive if not the place...
I have a problem. I can not unlock bootloader.
When I type "fastboot flash unlocktoken Unlock_code.bin" It answers "sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...FAILED (remote: unlock token check failed) finished. total time: 0.150s" I have tried reinstalling the drivers and doing it in different pc get the same result.
I configured it correctly repeatedly...
Help please. Thank you, very much.
Click to expand...
Click to collapse
Check your unlock_code.bin file, its reporting 0kb and that's a null file.
I would also recheck if the phone is being properly id'ed by the OS and there are no further communications issues.
Code, in theory gives correctly...
The conexion is correct (apparently)...
The file Unlock_code.bin is 2 kb.
raa_ said:
Code, in theory gives correctly...
The conexion is correct (apparently)...
The file Unlock_code.bin is 2 kb.
Click to expand...
Click to collapse
Try removing the battery off the phone then booting in fastboot and try again.
I did as usual... It answers "FAILED (remote: unlock token check failed) finished. total time: 0.150s"
I repeated the process many times
raa_ said:
I did as usual... It answers "FAILED (remote: unlock token check failed) finished. total time: 0.150s"
I repeated the process many times
Click to expand...
Click to collapse
What hboot are you ? I would do a ruu exe and redo that lockcode part to see if it fixes ya.
Sent from my PG86100 using xda premium
EVO 3D data are:
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
Oct 3 2011,15:03:01
How do a ruu exe? Help me please.
raa_ said:
EVO 3D data are:
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
Oct 3 2011,15:03:01
How do a ruu exe? Help me please.
Click to expand...
Click to collapse
So I'm guessing your cdma ? Sorry man been a long long day been running on 3 hrs of sleep lol I think you can root the revolutionary way since your not 1.5 hboot .
Sent from my PG86100 using xda premium
reaper24 said:
So I'm guessing your cdma ? Sorry man been a long long day been running on 3 hrs of sleep lol I think you can root the revolutionary way since your not 1.5 hboot .
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
In the stickies in the dev section football's post has links for the cdma ruu exe's
Make sure you know if your cdma or gsm?
Anyways download the one for hboot 1.49 . Don't snag the latest 2.17 or you will be hboot 1.5 .
When you have the program downloaded your AntiVirus may say something about it cause it is a exe don't worry file is safe.
Hook your phone up to your computer run the program while in hboot..
Sent from my PG86100 using xda premium
My model is European, I guess then that is GSM
Think you do have bad structure of Hboot?
Then you can not do? I can do?
Thanks
They're Gsm phone. There are stickies in the GSM Development Section for this, but here's where to go:

[Tutorial] [UNLOCK/ROOT] EVO 3D GSM Hboot 1.49.0011> + S-On [HTC Unlock method] http://forum.xda-developers.com/showthread.php?t=1248231
Unlock via HTC's site. If u get stuck at step13, you may have to reflash the original GSM Ruu (zip or exe) and try again.
[Tutorial - How to revert back to Original ROM for backup or warranty purposes] http://forum.xda-developers.com/showthread.php?t=1262457
(You can likely skip the "goldcard" setup if you can get the correct RUU for your phone/carrier from Football's GSM Ruu thread)
Once unlocked u use fastboot command prompt to flash (& enter) the correct Cwm Recovery (ShooterU ). Make a backup from recovery. Then flash the Su zip like it says in the op. Then your rooted.
Make a new rooted backup from recovery if you like.
Originally Posted by dr wasim said:
how to create backup from cwm? and do we have to flash kernal for installing any custom rom?
Click to expand...
Click to collapse
To make a CWM Backup, see guide/flashing notes in my signature, go to post 4 (cwm recovery notes) and u can get an idea of how to make w backup. Keep in mind the file links in the thread are for Sprint Cdma phones, so don't use the links. The step-by-step is correct.
The kernel is usually included with the ROM u just need to enter recovery by fastboot command prompt and make sure the ROM & kernel are compatible with your phone/baseband.
Sent from my PG86100 using Tapatalk
I have seen that I can´t go recovery, is normal?
raa_ said:
My model is European, I guess then that is GSM
Think you do have bad structure of Hboot?
Then you can not do? I can do?
Thanks
Click to expand...
Click to collapse
Ya ur gsm .. sorry man .. I know more about cdma .
Not much about gsm .
Sent from my PG86100 using xda premium
Thank you reaper24
I hope someone can help me
Did u go to the thread I mentioned? U won't have a recovery until u HTC unlock & flash one via fastboot command prompt.
Sent from my PG86100 using Tapatalk
Ok, thanks.
I follow the link http://forum.xda-developers.com/showthread.php?t=1256208, I hope to get lucky
Solved!!!
I installed "RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.9 020.00_10.13.9020.08_2M_release_203403_signed" and it put me Hboot 1.49.007 then I installed Revolutionary Recover S-OFF & Recovery Tool 0.4pre4
Thank you for all!!

[Q] Can't flash RUU, return phone to stock (noob needs help)

Tried following the instructions on this site to flash the latest HTC firmware and I could not install it from 4EXT. Renamed the file to PG86IMG.zip and flashed it from fastboot but hit an error. Tried to run the RUU for my radio version and every single one has hit an error (Update Failed! Main Version is older!).
The phone was originally HBOOT 1.40 S-OFF but it is now HBOOT 1.57 with s-on (which I did). I want to return the phone back to stock and start fresh but I really don't know how. Can I return back to HBOOT 1.40 or do I have to flash to the latest 1.50 and downgrade?
I'm really stumped by this one and any help would be greatly appreciated.
I'm as new to the forums as you, but I did a little messing and reading around. In order to return your phone to the same way you bought it, you need to downgrade hboot to version 1.4 and then run the RUU.exe of your firmware version (I'm not sure which version it is for your phone, it was 2.17.651.5 for me but I got my phone with hboot 1.5). The downgrade thread is here [it's very tricky to brick it, make sure the light is a solid faint red (NOT BLINKING) in order to do it successfully]. Hopefully someone else can tell you which RUU version to use (to run before the downgrade if you get the *Security Warning* in hboot, as well as the one to use after in order to return to the way you were when you got the phone). I just downloaded all the RUU's and ran them all until one worked.
LesbianSeagull said:
Tried following the instructions on this site to flash the latest HTC firmware and I could not install it from 4EXT. Renamed the file to PG86IMG.zip and flashed it from fastboot but hit an error. Tried to run the RUU for my radio version and every single one has hit an error (Update Failed! Main Version is older!).
The phone was originally HBOOT 1.40 S-OFF but it is now HBOOT 1.57 with s-on (which I did). I want to return the phone back to stock and start fresh but I really don't know how. Can I return back to HBOOT 1.40 or do I have to flash to the latest 1.50 and downgrade?
I'm really stumped by this one and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hi, did you unlock and root your phone using the HTC method?
If so I think I may be able to help.
koty2012 said:
Hi, did you unlock and root your phone using the HTC method?
If so I think I may be able to help.
Click to expand...
Click to collapse
I think it was the Revolutionary method. Can't remember for sure since I did it quite a long time ago.
LesbianSeagull said:
I think it was the Revolutionary method. Can't remember for sure since I did it quite a long time ago.
Click to expand...
Click to collapse
Pm me your email, and if you'd like I could email you the RUU I have and you could see if it'll work. I'll walk you through it. You have gmail right?
Bizarre1 said:
I'm as new to the forums as you, but I did a little messing and reading around. In order to return your phone to the same way you bought it, you need to downgrade hboot to version 1.4 and then run the RUU.exe of your firmware version (I'm not sure which version it is for your phone, it was 2.17.651.5 for me but I got my phone with hboot 1.5). The downgrade thread is here [it's very tricky to brick it, make sure the light is a solid faint red (NOT BLINKING) in order to do it successfully]. Hopefully someone else can tell you which RUU version to use (to run before the downgrade if you get the *Security Warning* in hboot, as well as the one to use after in order to return to the way you were when you got the phone). I just downloaded all the RUU's and ran them all until one worked.
Click to expand...
Click to collapse
Just tried that, but I got the same HBOOT error message and I couldn't start the update in order to brick.
LesbianSeagull said:
Just tried that, but I got the same HBOOT error message and I couldn't start the update in order to brick.
Click to expand...
Click to collapse
Since you got that error, you need to flash the 2.08 or 2.17 RUU.exe to get rid of it. Try running the RUU while in the fastboot menu, and make sure you have the HTC drivers installed on your computer.
Have you tried both RUUs to no avail?
*Edit: I believe the drivers will install if you install HTC sync. Unfortunately I cant post the link to it, but just do a Google for HTC Evo 3D drivers. It's on HTC's website
koty2012 said:
Pm me your email, and if you'd like I could email you the RUU I have and you could see if it'll work. I'll walk you through it. You have gmail right?
Click to expand...
Click to collapse
PM'd and thanked
Bizarre1 said:
Since you got that error, you need to flash the 2.08 or 2.17 RUU.exe to get rid of it. Try running the RUU while in the fastboot menu, and make sure you have the HTC drivers installed on your computer.
Have you tried both RUUs to no avail?
Click to expand...
Click to collapse
Tried both
Code:
RUU_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230_signed
RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304_signed
Both of which gave me the same error. the RUU connects over fastbootusb but halts at a specific point in the install, so I assume I have the right HTC drivers. I can find the install point in question if that would help.
Tried both
Code:
RUU_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230_signed
RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304_signed
Both of which gave me the same error. the RUU connects over fastbootusb but halts at a specific point in the install, so I assume I have the right HTC drivers. I can find the install point in question if that would help.
Click to expand...
Click to collapse
That's really strange. Just to make sure you have the right drivers, go to Control Panel and then to Device Manager and see if your phone is there. It should be under "Android USB devices" or the like. Also, is USB debugging on before the going into hboot?
*Edit: Some more little things, HTC Sync should be uninstalled from your computer, and your phone should be locked.
LesbianSeagull said:
Tried following the instructions on this site to flash the latest HTC firmware and I could not install it from 4EXT. Renamed the file to PG86IMG.zip and flashed it from fastboot but hit an error. Tried to run the RUU for my radio version and every single one has hit an error (Update Failed! Main Version is older!).
The phone was originally HBOOT 1.40 S-OFF but it is now HBOOT 1.57 with s-on (which I did). I want to return the phone back to stock and start fresh but I really don't know how. Can I return back to HBOOT 1.40 or do I have to flash to the latest 1.50 and downgrade?
I'm really stumped by this one and any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you flash the vm firmware ??
#Root-Hack_Mod*Always\
laie1472 said:
Did you flash the vm firmware ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
I used the instructions and download links from androidadvices(dot)com/update-htc-evo-3d-cdma-leaked-ics-403-firmware/. Reading the instructions now I see that I didn't put the phone into USB recovery mode. I can't get back into the ROM to do so and I can't get into my recovery either.
Your currently on hboot 1.57 and thats your your getting an update fail since 2.17 RUU has hboot1.50 Im not sure their is a way to downgrade this firmware unless you try the downgrade method for hboot 1.50 but that could maybe cause in a permanent brick.
iTzLOLtrain said:
Your currently on hboot 1.57 and thats your your getting an update fail since 2.17 RUU has hboot1.50 Im not sure their is a way to downgrade this firmware unless you try the downgrade method for hboot 1.50 but that could maybe cause in a permanent brick.
Click to expand...
Click to collapse
I'm trying that now. Hopefully it works!
So I tried bricking the phone using Unknownforce's method but everytime I would try and flash the 2.17 PG86IMG file in fastboot I get the same Hboot Version error. I also tried the Shooter_ICS_35_S_Sprint zip by renaming it to PG86IMG and and flashing in fastboot (since it has the matching hboot version), but I get a CID incorrect error. I'm trying to unlock my bootloader by using the HTC method in order to change the CID, but when I do so it gives me this in terminal.
Code:
C:\rootevo3dnew>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.151s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.159s
C:\rootevo3dnew>fastboot oem writecid htc__001
...
(bootloader) shooter_init_sd, SD card already power on
(bootloader) sdcc_init_memory_device done
(bootloader) [FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
(bootloader) [JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 0.198s]
finished. total time: 0.198s
My bootloader still says it's locked but the unlock_code.bin in ADB looks like it's working. Can anyone tell me what is happening? This is the only thing holding me back from downgrading and it's frustrating
LesbianSeagull said:
So I tried bricking the phone using Unknownforce's method but everytime I would try and flash the 2.17 PG86IMG file in fastboot I get the same Hboot Version error. I also tried the Shooter_ICS_35_S_Sprint zip by renaming it to PG86IMG and and flashing in fastboot (since it has the matching hboot version), but I get a CID incorrect error. I'm trying to unlock my bootloader by using the HTC method in order to change the CID, but when I do so it gives me this in terminal.
Code:
C:\rootevo3dnew>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.151s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.159s
C:\rootevo3dnew>fastboot oem writecid htc__001
...
(bootloader) shooter_init_sd, SD card already power on
(bootloader) sdcc_init_memory_device done
(bootloader) [FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
(bootloader) [JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 0.198s]
finished. total time: 0.198s
My bootloader still says it's locked but the unlock_code.bin in ADB looks like it's working. Can anyone tell me what is happening? This is the only thing holding me back from downgrading and it's frustrating
Click to expand...
Click to collapse
Hey sorry I so abrubtly had to go earlier, did you try again to flash the cwm.img? If you can get into backup and restore I feel as if you might be able to just go back to the previous hboot and ROM you had , not making any promises though.
koty2012 said:
Hey sorry I so abrubtly had to go earlier, did you try again to flash the cwm.img? If you can get into backup and restore I feel as if you might be able to just go back to the previous hboot and ROM you had , not making any promises though.
Click to expand...
Click to collapse
Just gave it another shot, but I got the same error:
Code:
C:\rootevo3dnew>fastboot flash boot cwm.img
sending 'boot' (4832 KB)...
OKAY [ 1.130s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.928s
EDIT: Also tried running the 2.17 RUU again and it fails after attempting a signature check as well.
LesbianSeagull said:
Just gave it another shot, but I got the same error:
Code:
C:\rootevo3dnew>fastboot flash boot cwm.img
sending 'boot' (4832 KB)...
OKAY [ 1.130s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.928s
EDIT: Also tried running the 2.17 RUU again and it fails after attempting a signature check as well.
Click to expand...
Click to collapse
I believe you don't flash that as boot. You flash cwm.img (clock work mod) as a recovery. Try
C:\rootevo3dnew>fastboot flash recovery cwm.img
*Edit: make sure your cwm.img is in your C:\rootevo3dnew folder.
Then after that, boot into the bootloader and go to recovery to access clockwork mod. See if you have any backups (which will save you a TON of pain by putting you back on hboot 1.4 with whatever former ROM you backed it up with)
Sent from my Evo 3D using XDA
Bizarre1 said:
I believe you don't flash that as boot. You flash cwm.img (clock work mod) as a recovery. Try
C:\rootevo3dnew>fastboot flash recovery cwm.img
*Edit: make sure your cwm.img is in your C:\rootevo3dnew folder.
Then after that, boot into the bootloader and go to recovery to access clockwork mod. See if you have any backups (which will save you a TON of pain by putting you back on hboot 1.4 with whatever former ROM you backed it up with)
Sent from my Evo 3D using XDA
Click to expand...
Click to collapse
Tried it, still gave me the signature verification error. I think it's because the bootloader is locked.
bump
Is there anything else I can try???
I know someone on XDA has to have a solution to this...
LesbianSeagull said:
Is there anything else I can try???
I know someone on XDA has to have a solution to this...
Click to expand...
Click to collapse
You have to be unlocked to flash the recovery image. Does it not say its unlocked at the top of HBOOT after using the HTC method?
Sent from the mobile paperweight itself!

remote: not allowed

hi guys, i have a big problem, i have an htc evo 3d gsm hboot 1.49.0007 S-OFF but i can't use fastboot, it gives me this error, for example i wanted to flash a boot.img:
c:\Android>fastboot flash boot boot.img
sending 'boot' (3720 KB)...
OKAY [ 0.861s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 1.179s
why? what can i do?
Peppero said:
hi guys, i have a big problem, i have an htc evo 3d gsm hboot 1.49.0007 S-OFF but i can't use fastboot, it gives me this error, for example i wanted to flash a boot.img:
c:\Android>fastboot flash boot boot.img
sending 'boot' (3720 KB)...
OKAY [ 0.861s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 1.179s
why? what can i do?
Click to expand...
Click to collapse
Read this post for an explanation.
You will need to either HTC unlock your bootloader, which is not recommended since it will leave a flag on your phone that it was modified, or flash a custom bootloader for your model. I don't have links to any for a GSM phone but I'm sure someone else can help.
ramjet73
ramjet73 said:
Read this post for an explanation.
You will need to either HTC unlock your bootloader, which is not recommended since it will leave a flag on your phone that it was modified, or flash a custom bootloader for your model. I don't have links to any for a GSM phone but I'm sure someone else can help.
ramjet73
Click to expand...
Click to collapse
ehm..but i have S-OFF RL, revolutionary, so i have already a custom bootloader....maybe method E of this post can help me? :/ http://forum.xda-developers.com/showthread.php?t=1743466
Peppero said:
ehm..but i have S-OFF RL, revolutionary, so i have already a custom bootloader....maybe method E of this post can help me? :/
Click to expand...
Click to collapse
I'm not familiar with the GSM hboots and didn't recognize 1.49.0007 as a Revolutionary version, but since you are S-OFF you could try flashing one of the JBear modified bootloaders from this page. I know they support the extended fastboot commands like "flash" and "erase". You might have to flash it from your current bootloader as PG86IMG.zip in the root of your SD card.
ramjet73
ramjet73 said:
Read this post for an explanation.
You will need to either HTC unlock your bootloader, which is not recommended since it will leave a flag on your phone that it was modified, or flash a custom bootloader for your model. I don't have links to any for a GSM phone but I'm sure someone else can help.
ramjet73
Click to expand...
Click to collapse
ramjet73 said:
I'm not familiar with the GSM hboots and didn't recognize 1.49.0007 as a Revolutionary version, but since you are S-OFF you could try flashing one of the JBear modified bootloaders from this page. I know they support the extended fastboot commands like "flash" and "erase". You might have to flash it from your current bootloader as PG86IMG.zip in the root of your SD card.
ramjet73
Click to expand...
Click to collapse
ok, i have solved, after the method E i have used the revolutionary method and now i have hboot 1.49.1107 revolutionary, hboot 1.49.0007 was not revolutionary xD
Same hboot as me, you may now back up your gb crap (nandroid) flash the updated your firmware and flash away, the bonus is you can flash any Rom with that hboot. As I have not had any bootloops, from miui, sense 3.6 or sense 4.1
Sent from my HTC EVO 3D X515m using Tapatalk 2

[Bricked/Semi-Bricked]::[walkthrough needed]

Basically I was given a bricked HTC evo 4g LTE. When I try to power it on normally it stays on the white "HTC quietly brilliant" it also says "this ROM is for development purposes only" under that.. when I boot into the boot-loader it says
***tampered ***
***relocked ***
Jewel PVT SHIP S-ON RL
HBOOT-2.09.0000
RADIO-1.12.11.1210
OpenDSP-V31.1.0.45.0815
eMMC-boot
Oct 18 2012,15:46:20
There is no recovery, when I try to boot into recovery through adb via a cmd prompt or any other way it just reboots into fast boot. The firmware version is 3.16.xxxxxx
I would really appreciate a walkthrough or at least some tips/help on what to do. I figured getting s-off would be the best place to start but no luck so far
Sent from my SGH-T989 using xda premium
sk8dayfuknight said:
Basically I was given a bricked HTC evo 4g LTE. When I try to power it on normally it stays on the white "HTC quietly brilliant" it also says "this ROM is for development purposes only" under that.. when I boot into the boot-loader it says
***tampered ***
***relocked ***
Jewel PVT SHIP S-ON RL
HBOOT-2.09.0000
RADIO-1.12.11.1210
OpenDSP-V31.1.0.45.0815
eMMC-boot
Oct 18 2012,15:46:20
There is no recovery, when I try to boot into recovery through adb via a cmd prompt or any other way it just reboots into fast boot. The firmware version is 3.16.xxxxxx
I would really appreciate a walkthrough or at least some tips/help on what to do. I figured getting s-off would be the best place to start but no luck so far
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Have you tried running a ruu to get an OS back? Sounds like all you need. Then use dirty racun or face palm for s off
Edit: Btw you are far from bricked my friend...
Sent from my EVO using Tapatalk 2
You need to unlock your bootloader, follow the instructions on big daddy's thread and the flash a recovery, you are re-locked... Then install a rom with a soon kernel installer or fastboot the boot.img
from my EVO using xda app-developers app
There is no RUU for my current firm ware. Only zip files.
You don't need a RUU... Just go to htcdev.com and follow the instructions to unlock your bootloader... Leave your phone in fastboot and flash twrp... Download either meanbean or viper rom which have s-on installers baked in and follow the instructions in the respective OP
Edit: go to this thread and follow instructions from step 1 to step 3a...
http://forum.xda-developers.com/showthread.php?p=35217085
Once you do that reboot into twrp and wipe everything then install a ROM with a s-on kernel installer...
Sent from my EVO using xda app-developers app
sk8dayfuknight said:
There is no RUU for my current firm ware. Only zip files.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2197909
And no you don't Need an ruu but I wasn't sure your direction with all of this.
Unlocking and installing a custom recovery is fine like stated above.
Just read through all the s off directions to get an idea of the prerequisites and what you will need to accomplish it.
Sent from my EVO using Tapatalk 2
Right on thanks guys. Never owned an HTC device before, so some of this new to me. I usually stick to Samsung, or LG.
Sent from my SGH-T989 using xda premium
gunfromsako said:
http://forum.xda-developers.com/showthread.php?t=2197909
And no you don't Need an ruu but I wasn't sure your direction with all of this.
Unlocking and installing a custom recovery is fine like stated above.
Just read through all the s off directions to get an idea of the prerequisites and what you will need to accomplish it.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
that ruu requires s-off, i meant that theres no ruu's that dont require s-off btw
how long will dirty racun do this for?
Rebooting from bootloader
Waiting...
...waiting
Detecting...
Starting up...
Searching for the device...
Found the device...
Racun is sneaking...
It's a long way to sneak this will take several minutes...
Hiding behind a wall..
Hiding under your Mercedes...
Racun has burned himself on your engine.
..............
Fastboot detected.
....................
Racun is sneaking...
It's a long way to sneak this will take several minutes...
Hiding behind a wall..
Hiding under your Mercedes...
Racun has burned himself on your engine.
..............
Fastboot detected.
...................
Racun is sneaking...
It's a long way to sneak this will take several minutes...
Hiding behind a wall..
Hiding under your Mercedes...
Racun has burned himself on your engine.
..............
Fastboot detected.
....................
Racun is sneaking...
It's a long way to sneak this will take several minutes...
Hiding behind a wall..
Hiding under your Mercedes...
Racun has burned himself on your engine.
..............
Fastboot detected.
Several minutes...?
Edit : sorry I couldn't resist but the best way to get support and the fastest is to visit their irc channel
Sent from my EVO using Tapatalk 2
Help Please!
jocarog said:
You don't need a RUU... Just go to htcdev.com and follow the instructions to unlock your bootloader... Leave your phone in fastboot and flash twrp... Download either meanbean or viper rom which have s-on installers baked in and follow the instructions in the respective OP
Edit: go to this thread and follow instructions from step 1 to step 3a...
http://forum.xda-developers.com/showthread.php?p=35217085
Once you do that reboot into twrp and wipe everything then install a ROM with a s-on kernel installer...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
jocarog said:
You don't need a RUU... Just go to htcdev.com and follow the instructions to unlock your bootloader... Leave your phone in fastboot and flash twrp... Download either meanbean or viper rom which have s-on installers baked in and follow the instructions in the respective OP
Edit: go to this thread and follow instructions from step 1 to step 3a...
http://forum.xda-developers.com/showthread.php?p=35217085
Once you do that reboot into twrp and wipe everything then install a ROM with a s-on kernel installer...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Whats up XDA! First, thanks for all the help to the community. I would REALLY appreciate your help on this... I have the same problem here.(Bought the phone of someone in this condition.) After reading tons of threads I'm still stuck. I've tried to gain S-OFF by HTCdev and after pasting the unlock token this is what I got:
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
(And I made sure everything on it was pasted onto the box.) no missing characters. Tried a few times and still the same.
Also tried to push OTA through cmd following another thread and this was the result:
C:\ANDROID>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.094s]
finished. total time: 0.094s
(went from bootloader screen to a black screen with HTC on it.
then...
C:\ANDROID>fastboot erase cache
erasing 'cache'...
OKAY [ 0.125s]
finished. total time: 0.125s
And then...
C:\ANDROID>fastboot flash zip jewel_jb_ota_firmware.zip
sending 'zip' (20142 KB)...
OKAY [ 2.219s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 4.313s
Please any help is appreciated.
The phone reads:
***TAMPERED***
***RELOCKED***
***SECURITY WARNING***
JEWEL PVT SHIP S-ON RL
HBOOT - 2.09. 0000
RADIO- 1. 12. 11. 1210
OpenDSP- v31. 1. 0.4. 0815
eMMC- boot
Oct 18 2012, 15: 46: 20
---------- Post added at 07:03 PM ---------- Previous post was at 06:41 PM ----------
jocarog said:
You don't need a RUU... Just go to htcdev.com and follow the instructions to unlock your bootloader... Leave your phone in fastboot and flash twrp... Download either meanbean or viper rom which have s-on installers baked in and follow the instructions in the respective OP
Edit: go to this thread and follow instructions from step 1 to step 3a...
http://forum.xda-developers.com/showthread.php?p=35217085
Once you do that reboot into twrp and wipe everything then install a ROM with a s-on kernel installer...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Whats up XDA! First, thanks for all the help to the community. I would REALLY appreciate your help on this... I have the same problem here.(Bought the phone of someone in this condition.) After reading tons of threads I'm still stuck. I've tried to gain S-OFF by HTCdev and after pasting the unlock token this is what I got:
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
(And I made sure everything on it was pasted onto the box.) no missing characters. Tried a few times and still the same.
Also tried to push OTA through cmd following another thread and this was the result:
C:\ANDROID>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.094s]
finished. total time: 0.094s
(went from bootloader screen to a black screen with HTC on it.
then...
C:\ANDROID>fastboot erase cache
erasing 'cache'...
OKAY [ 0.125s]
finished. total time: 0.125s
And then...
C:\ANDROID>fastboot flash zip jewel_jb_ota_firmware.zip
sending 'zip' (20142 KB)...
OKAY [ 2.219s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 4.313s
Please any help is appreciated.
The phone reads:
***TAMPERED***
***RELOCKED***
***SECURITY WARNING***
JEWEL PVT SHIP S-ON RL
HBOOT - 2.09. 0000
RADIO- 1. 12. 11. 1210
OpenDSP- v31. 1. 0.4. 0815
eMMC- boot
Oct 18 2012, 15: 46: 20
PM bigdaddy619 regarding your issue with the unlock token. As far as S-off goes, once your bootloader is unlocked you will need to use Dirty Racun.
Also, HTC never released an RUU for the latest OTA, so you can't RUU. There is an RUU tool in the development section for the latest OTA but you must be S-off to use it.
Sent from my EVO using xda premium
FinZ28 said:
PM bigdaddy619 regarding your issue with the unlock token. As far as S-off goes, once your bootloader is unlocked you will need to use Dirty Racun.
Also, HTC never released an RUU for the latest OTA, so you can't RUU. There is an RUU tool in the development section for the latest OTA but you must be S-off to use it.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Ok thanks, Ill do that.

[Q] Softbricked and really screwed up.....

Okay guys. I unlocked with Moonshine, was on a Carbon ROM 10.1, updated last night to a 10.2 based Carbon ROM and lost my data. I found out to get it back, I needed to RUU back to stock. Downloaded the RUU and tried to run but it tells me that fastboot.exe and adb.exe have stopped working (I am on Windows 8). In the meantime, I missed a step and re-locked the bootloader early.
Trying to re-unlock with Moonshine and it continually reboots my phone at the "Launching Temproot" stage. Tried to unlock with Facepalm and it worked fine except it didn't fail (as it's designed too) Try to run the next step from Facepalm (The boot stage) and it fails.
Now when I hard reboot get out of the HTC screen from Facepalm, it hangs on the splash screen which is custom. Also after I performed Facepalm, it overwrote my custom recovery so that's gone and it won't let me write another one because the bootloader is locked.
I'm am at a complete loss here and am very afraid that my DNA it toast but I know there is a glimmer of hope because I can access fastboot. Any help from the masters here at XDA would be great.
Snowman1771 said:
Okay guys. I unlocked with Moonshine, was on a Carbon ROM 10.1, updated last night to a 10.2 based Carbon ROM and lost my data. I found out to get it back, I needed to RUU back to stock. Downloaded the RUU and tried to run but it tells me that fastboot.exe and adb.exe have stopped working (I am on Windows 8). In the meantime, I missed a step and re-locked the bootloader early.
Trying to re-unlock with Moonshine and it continually reboots my phone at the "Launching Temproot" stage. Tried to unlock with Facepalm and it worked fine except it didn't fail (as it's designed too) Try to run the next step from Facepalm (The boot stage) and it fails.
Now when I hard reboot get out of the HTC screen from Facepalm, it hangs on the splash screen which is custom. Also after I performed Facepalm, it overwrote my custom recovery so that's gone and it won't let me write another one because the bootloader is locked.
I'm am at a complete loss here and am very afraid that my DNA it toast but I know there is a glimmer of hope because I can access fastboot. Any help from the masters here at XDA would be great.
Click to expand...
Click to collapse
Wow! 1)..RUU does totally format, erase and finally restore the original system that came with the phone as new. so you loose everything
2) Try it from Windows 7 PC
3) Return to stock on Moonshine S-Off > http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Okay, Tried RUU from a Windows 7 pc and no dice, I get error 170 (USB connection) but no fastboot or adb failures. I was able to flash the stock 1.15 HBOOT but when I go to fastboot it tells me my HBOOT is version 1.33.
Tried Facepalm to no avail, It still won't fail after the first command as its supposed to. Tried Moonshine as well but wouldn't work because debugging isn't enabled.
Found a guide that said to find the RUU rom in the temp files and put that on the sd-card which I can't do because it won't boot, but thought I would try to flash it and this is what it did - P.S. The Rom is the PB99IMG file
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.045s]
finished. total time: 0.045s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot fla
sh zip PB99IMG.zip
sending 'zip' (913111 KB)...
OKAY [ 40.273s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 46.433s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>
Snowman1771 said:
Okay, Tried RUU from a Windows 7 pc and no dice, I get error 170 (USB connection) but no fastboot or adb failures. I was able to flash the stock 1.15 HBOOT but when I go to fastboot it tells me my HBOOT is version 1.33.
Tried Facepalm to no avail, It still won't fail after the first command as its supposed to. Tried Moonshine as well but wouldn't work because debugging isn't enabled.
Found a guide that said to find the RUU rom in the temp files and put that on the sd-card which I can't do because it won't boot, but thought I would try to flash it and this is what it did - P.S. The Rom is the PB99IMG file
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.045s]
finished. total time: 0.045s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot fla
sh zip PB99IMG.zip
sending 'zip' (913111 KB)...
OKAY [ 40.273s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 46.433s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>
Click to expand...
Click to collapse
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
letschky said:
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
Click to expand...
Click to collapse
IDK it may work, worked in a different phone, but have to be pushed to the sd card
http://forum.xda-developers.com/showthread.php?p=32574569
letschky said:
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
Click to expand...
Click to collapse
Here is the link to what I used to get the PB99IMG.zip - It is the same one finanandroid posted
http://forum.xda-developers.com/showthread.php?p=32574569
And my Bootloader is locked because I was following this guide (http://forum.xda-developers.com/showthread.php?t=2293919) and spaced out and locked the bootloader without realizing I needed to flash the stock HBOOT and Splash screen, That's what I get for trying to do it at 11:30 at night.
Snowman1771 said:
Here is the link to what I used to get the PB99IMG.zip - It is the same one finanandroid posted
http://forum.xda-developers.com/showthread.php?p=32574569
And my Bootloader is locked because I was following this guide (http://forum.xda-developers.com/showthread.php?t=2293919) and spaced out and locked the bootloader without realizing I needed to flash the stock HBOOT and Splash screen, That's what I get for trying to do it at 11:30 at night.
Click to expand...
Click to collapse
Where are you currently?
s-off?
locked?
whats your CID read as in fastboot?
Also are you on windows 8 or 8.1 and do you have working drivers to begin with.
I have S-ON and Bootloader is locked,Problem,i have Software 1.15 but i flash the HBoot,Boot.img ... To make Moonshine S-OFF.This is the 2.06 Kernel with Software 1.15 and i have Problem with Wifi and the Screen flackered white.And the next Problem,i can't unlock the Bootloader witn Hboot 1.33,i hope you understand me.
jake.corey.jacobs said:
Where are you currently?
s-off?
locked?
whats your CID read as in fastboot?
Also are you on windows 8 or 8.1 and do you have working drivers to begin with.
Click to expand...
Click to collapse
My bootloader screen reads,
"Tampered
Locked
Monarudo pvt ship s-off
CID-VZW_001
HBOOT-1.33.0001
RADIO-1.01.01.0110"
I am on Windows 8 (and have access to a Windows 7 desktop) and yes, I have working drivers.
Moonshine and face palm are failing because you're already s-off
Try a different usb port and flash the stock splash screen, then run RUU
Phaded said:
Moonshine and face palm are failing because you're already s-off
Try a different usb port and flash the stock splash screen, then run RUU
Click to expand...
Click to collapse
Okay I tried both of my 2.0 USB slots and neither worked, Here is what I get -
C:\Users\Matt\Desktop\adt-bundle-windows-x86_64-20130522\sdk\tools>fastboot flas
h splash1 splash.img
sending 'splash1' (4050 KB)...
OKAY [ 0.616s]
writing 'splash1'...
FAILED (remote: not allowed)
finished. total time: 0.653s
You need to unlock... Um try htcdev and go for an unlock token. Since you're s-off it may work.
Fastboot oem unlock might work as well. Try that first, then if no go try htcdev
Phaded said:
You need to unlock... Um try htcdev and go for an unlock token. Since you're s-off it may work.
Fastboot oem unlock might work as well. Try that first, then if no go try htcdev
Click to expand...
Click to collapse
Just tried to OEM unlock and nothing, it gives me this.
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.010s]
finished. total time: 0.010s
The command is "fastboot oem unlock" isn't?
Just looked into HTC Dev and the DNA is not listed as being supported.
Snowman1771 said:
Just looked into HTC Dev and the DNA is not listed as being supported.
Click to expand...
Click to collapse
you have to select other devices.
Like Jake said, scroll to the other devices part, then try
jake.corey.jacobs said:
you have to select other devices.
Click to expand...
Click to collapse
Just tried and it failed, here is what it said.
Error Code: 160.
Error Reason: MID Not Allowed.
Snowman1771 said:
Just tried and it failed, here is what it said.
Error Code: 160.
Error Reason: MID Not Allowed.
Click to expand...
Click to collapse
does your CID say vzw_001 or 111111 or 222222
You may be able to write the cid since you're s-off. Don't hold me to that tho.
jake.corey.jacobs said:
does your CID say vzw_001 or 111111 or 222222
Click to expand...
Click to collapse
The CID says VZW_001.

Categories

Resources