I accidentally flashed the wrong recovery image on my karbonn a4+ using mobileuncle tools . The phone is stuck in recovery mode and I am unable to make a selection in recovery. How can I flash the correct version of stock recovery. i cant factory reset in my phone. plz give a solution ......
i want to flash stock recovery or cwm recovery for karbonn a4+
Tried removing the battery?
Can you get into fastboot?
DopeyTheOne said:
Tried removing the battery?
Can you get into fastboot?
Click to expand...
Click to collapse
i tried to removing battery but only black screen on recovery mode
and i cant get into fastboot
is there way to install cwm recovery on karbonn a4+? (mt6577 hardware)
Red ngsTax
i tried to removing battery but only black screen on recovery mode
and i cant get into fastboot
is there way to install cwm recovery on karbonn a4+? (mt6577 hardware)
Click to expand...
Click to collapse
Ok, let's troubleshoot some more
When you connect thru usb, does the pc picks anything up? There are ways to check....via the command adb devices in cmd (make sure you have SDK installed), if it says "no devices detected" you should check the devicemanager to see if there's an unknown driver found (they usually pop out the tree with an ! behind it.
---------- Post added at 09:17 AM ---------- Previous post was at 08:47 AM ----------
i tried to removing battery but only black screen on recovery mode
and i cant get into fastboot
is there way to install cwm recovery on karbonn a4+? (mt6577 hardware)
Click to expand...
Click to collapse
Ok, let's troubleshoot some more
When you connect thru usb, does the pc picks anything up? There are ways to check....via the command adb devices in cmd (make sure you have SDK installed), if it says "no devices detected" you should check the devicemanager to see if there's an unknown driver found (they usually pop out the tree with an ! behind it.
mobile is repaired at karbonn care service :laugh:
the correct stock recovery is flashed
thnks for reply :good:
can u plz upload stock recovery img of karbonn a4+ my too recovery corrupted.. help me out
Happened to me too, but I later flashed using another toolkit and it worked!
Hey, Can u post your boot and recover image.. i strucked in similar problem... as am in outside india.. i can t go karbonn servicecenter.
Related
Please help me a have an HCL AP-10 tablet and i am facing a problem in it , i tried to backup my current ROm using rom manager it said that to backup you need to install CWM recovery so i did that and and installed gtablet recovery then clicked on backup Rom but i had not flashed the memory , problem i am faceing is that now its keeping showing the "Booting recovery kernel image " . when i connect it to pc using usb my pc detects the device but not able to recognise the device
Configuratio
Nvidia Tegra 2 cortex a9(Nvidia Harmony)
Please suggest me some solution
Have you tried flashing a different recovery?
Theonew said:
Have you tried flashing a different recovery?
Click to expand...
Click to collapse
i just not getting how can i do that , bcoz its not starting at ol its just get stuck on main screen which keeps showing that "booting recovery kernel image"
also my pc is not able to detect its usb drivers
Please tell me how can i try some other flash recovery or is theri any way to cancel the reboot in recovery mode command . so that i can do my work on that tablet
shobhitdimple said:
i just not getting how can i do that , bcoz its not starting at ol its just get stuck on main screen which keeps showing that "booting recovery kernel image"
also my pc is not able to detect its usb drivers
Please tell me how can i try some other flash recovery or is theri any way to cancel the reboot in recovery mode command . so that i can do my work on that tablet
Click to expand...
Click to collapse
Can your device boot up?
Theonew said:
Can your device boot up?
Click to expand...
Click to collapse
its not booting right now but if there is any way to cancel the recovery mood reboot command it will boot up and can start android
have u tried nv flash for flashing the rom. try it with 1.2 boot loader and u can use ROMS for adam or g tab
Hi guyz im new 2 xda
I have a serius prob actualy i have karbonn a1(clone of zte n721and also have same hardware and software of huawei pulse mini and huawei u8150) problem is that my device is stucked on boot logo and nothing is working like i tried to go into recovery mode and also in bootloader mode but no luck. also tried from pc with adb and fastboot but it also not worked (whenever i connect my phone to pc it automaticaly detected as adb interface)i also installed usb drivers correctly n still no luck
This happend when i tried to flash recovery n boot image via terminal emulater... when it giving me out of space error i rebooted my cell n this happend.... plz plz plz help me guyz
what exactly did u do ???u tried to flash cwm ?
No i mean i already succesfuly flashed cwm but still i could not go into recovery mode so i thought flashing custom recovery and boot image can solve this problem n then i tried to flash these 2 images via terminal emulater but then i got out of space error while flashing so i rebooted my cell n stucked on boot logo
did u try flashing othr custom rom ?
How can i flash other rom even i cant go into recovery mode
Hi,
I have been trying to flash CWM recovery using every possible means. I have tried MTK Uncle tool and have even tried SP Tool. both process completes and gives success report but when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Reason i want to install CWM recovery is to get the phone nandroid backup and install some old ROM as the ROM which i have is 4.1.9 and has so many bugs in it. even it cant sync my google contacts and calender.
Please guide me why my phone is not getting recovery installed even after completing the whole process without any error and get OK report at the end as well but when first time it is asked to reboot into recovery it gives a blank screen and when we do that again after replacing the battery it enters into factory mode.
Details of Phone are
BB Chip : MT6575
MS Board : GT-i9300
Modem Ver: MAUI.11AMD.W11.50.SP.V20 2012/11/09 09:33
Built Time : 2013 / 02 / 18
UBoot Ver : 2010.06
Kernel Ver: 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #2 PREEMPT Tue Feb 19 09:27:09 CST 2013
Android Ver: 4.1.9
SW Ver: ALPS.ICS.MP.V2.6
Custom built Verno. : 1361175260
I say again i want to downgrade to some old version like 4.0.4 which has least number of bugs.
Thanx
rajafawadhameed said:
when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Click to expand...
Click to collapse
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
pokexpert said:
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
Click to expand...
Click to collapse
Yes i have tried both. Rom Manager reboots me into a blank screen from which i have to come out by removing battery and by pressing volume down button it again gives me blank screen
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
zelendel said:
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
Click to expand...
Click to collapse
Actually rest all is fine and the only bug is that i cant sync my google contact with this rom... my one friend and old model with 4.0.4 rom and it works fine thats why wanna try that
Moonguy75 said:
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried recovery manager... on first installation it showed no recovery installed i tapped on flash CWM recovery a popup appeared displaying downloading recovery... but it remains on 0% and suddenly it vanished at 0% and a black popup appear saying recovery flashed but still not visible in recovery colomn... and even if i do reboot into recovery mode same blank screen with nothing visible and if i restart by removing batter and open recovery manager it again says no recovery installed
What about preloader.... if i flash some other preloader but offcourse compatible to my model will that make any difference ?
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Downloaded the app that you referred. installed that but its not running every time i tap on it, error appear like unfortunately recovery manager has stopped. i checked it on both while installing it on internal storage and external both sorry that i am bothering you so much. I have been using android for last 7 years now have used HTC Hero, HTC Desire, HTC HD2, HTC EVO 3D, Samsung Galaxy S3 original.... have rooted them all recovery installed custom roms, kernels and everything i have done... but this one has really made me helpless
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Presently i have two type of drivers installed on my pc
1. when i plug in the phone in normal mode it detect it as MTK65xx Android phone drivers are installed
2. When i plug it in when completely switched off for use in SP Tool mode it has drivers USB V com installed
3. When i try to get into recovery and switch it on while pressing vol up button it gets into a blank screen when i plug it in in that mode it is detected again as MTK65xx android phone but i dont have any drivers for that.
is this mode mentioned in number 3 is bootloader or download mode ? and where can i find its drivers as i googled it but coudnt find anything on that
kindly also tell me some good and stable link for ADT
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
I have the same problem. please help I don't wanna lose hope
I Cant even find the suitable recovery img for my phone. Please if you can help it would amazing ans thanks so much
[/B][/B]
rajafawadhameed said:
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
Click to expand...
Click to collapse
I own the same phone and have tried installing CWM on it through all possible ways! I think that newer phones with MT6575 no longer work with the Recovery img that we have been trying.
try this
i m using one...
on the black screen it seems stuck.. but press the home button u would get the recovery screen...enjoy
Hai there...
This is Rahul S Nair talking in behalf of Samsung Galaxy Grand Quattro development (qualcomm blooded device).. I m a dev working for this device for creating a cwm... I successfully found a suitable method to root it formely.. But when we reached to cwm level we found that the device is not at all taking custom recoveries .. even a moded stock recovery is not being showing up.. whenever custom recovery flashes it ll give a black screen and reboot... after a long investigation we figured that this device have a locked bootloader.. Is it possible for you to unlock this guy....
Sent from my GT-I8552 using XDA Premium 4 mobile app
Insufficient storage !!
Hey guys !! I need help quick .. I bought the same phone Samsung galaxy s3 (mt6575) the copy .. i tried every thing i rooted it but when i flash a rom from sp tools it says insufficient space on device , and ADT ends up with starting and direct to "Fail" i don't know why ? i searched the whole xda forum nobody else got this problem .. Please help me .. PM me or anything
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?