One of the phones I picked up to resell.
Anyways its flashed with:
Carbon Rom - nightly 20130625-0418
CWM Recovery - 5.5.0.4
And on kernal:3.0.72-cyanogenmod-g2c1e1a3
How can i revert all back to factory?
Semborski said:
One of the phones I picked up to resell.
Anyways its flashed with:
Carbon Rom - nightly 20130625-0418
CWM Recovery - 5.5.0.4
And on kernal:3.0.72-cyanogenmod-g2c1e1a3
How can i revert all back to factory?
Click to expand...
Click to collapse
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
can you do this coming from a custom rom?
Yes you can.
Not to be a jerk... but if you bought a device to sell...
Why don't you put in the work of searching for this answer that's been gone over for over a year?
You are trying to make money doing this... usually jobs require effort.
Related
just got my i717R(locked with Rogers), tried to root the gadget but failed.
I flashed with the wrong BOOT.IMG file and the cellphone keeps stuck on SAMSUNG LOGO screen.:crying::crying::crying:
I have wiped the factory data and partition from the android recovery mode, which is the original one not CWM one.
Also once I tried to connect with ODIN and flash a CWM recovery, but it seems disconnect with the computer.
What should I do now? Please help !!!:crying::crying::crying::crying::crying:
You can try kies emergency recovery.
Kies will get you the latest firmware available for your device.
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
You can try kies emergency recovery.
Kies will get you the latest firmware available for your device.
1. On a PC open
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
Thank you so much !!! i am going to do it right now. Hope it will work.
PS. I just install the CWM recovery with another laptop. seems sth wrong with mine...
After that, I download the CM10 ATT rom and install from CWM recovery but it failed again.
Is there any idea what's wrong with it?
guojiachang said:
Thank you so much !!! i am going to do it right now. Hope it will work.
PS. I just install the CWM recovery with another laptop. seems sth wrong with mine...
After that, I download the CM10 ATT rom and install from CWM recovery but it failed again.
Is there any idea what's wrong with it?
Click to expand...
Click to collapse
There is another problem. The Kies forced to stop update the rom automaticlly which really drived me crazy.
And I think the problem is that Kies is not able to connect with my cellphone.
Anybody can help???
My phone could only get into S/W update mode, and using the “UpTestEX” offline method wasn’t working, as during the flashing process (14-20%, depending on current bootloader version). I also had a myriad of other issues along the way, but I found out the steps to a perfect fix for my LG Optimus L9 P769! I was also able to flash the following ROMs with this method: V20H (T-Mobile) and V10B (MetroPCS MS769 — less bloat, MUCH easier to clean with NoBloat).
This process will fix the following issues:
“LG Security Error” msg on boot
“Problem with Communication with phone” error during offline flash method
“Phone not detected!” error during flashing with “KZD_FW_UPD”
Unable to Download / flash with the latest LG customer support tool/PC Suite
Please read the following posts and give thanks:
Offline Flash method:
http://forum.xda-developers.com/showthread.php?t=2085344
Fastboot repair bootloader method:
http://forum.xda-developers.com/showthread.php?t=2292828
You will need:
Small http server running with modified hosts file (link above)
Fastboot package (link above)
Flash package (link to post below)
Instructions:
I randomly messed around and I got the flasher working! Massive thanks to djallen1 for the package—I don’t know if this version happens to have anything different. Here’s how I did it:
1. (using Win7 x64, used the flash package from this post: http://forum.xda-developers.com/showpost.php?p=51639161&postcount=2)
2. I used fastboot to flash ICS x-boot/boot (option 5 here: http://forum.xda-developers.com/showthread.php?t=2292828 )
3. YOU NEED ICS bootloader. Phone will not be detected by tool if you are on JB!!!
4. I uninstalled MSXML (from previous attempts)--not sure if this mattered
5. I uninstalled C:\ProgramData\LGMOBILEAX\B2C_Client (from previous attempts)--not sure if this mattered
6. I set Windows Enabler and UpTextEx to Run in XP SP3 Compatibility mode + Run as admin checked
7. I took a shot in the dark and ran KDZ_FW_UPD as administrator
8. Used “3GQCT” + “EMERGENCY” mode, and selected the KDZ file to flash
9. Put the phone in “S/W Update” mode (press Vol Up, insert battery, insert USB cable)
10. Go into Device Manager (right click “My Computer, click “Manage”, then “Device Manager”)
11. I disabled the “LGE Mobile USB Modem #X” (listed under the “Modems” section)
12. Then click “Launch Software Update”
13. Software update [KDZ] will display two lines, “Launching SW Update” and “Unpacking KDZ”
14. [KDZ] WILL FREEZE / display “Not Responding” THIS IS OK. WAIT PATIENTLY.
15. The window will unfreeze/un-grey out and you will see “|Param = xx” updates. This is the “progress bar”—when you reach 100%, it will restart and your phone will be alive again! (fyi, I had “Model Dll Msg Not Found(200x, 0)” messages throughout this flashing process)
16. Do a Hard Reset (press Power, Vol Down, Home until LG logo shows up, then release power)
17. ENJOY!
็Hard!!
Breex243 said:
My phone could only get into S/W update mode, and using the “UpTestEX” offline method wasn’t working, as during the flashing process (14-20%, depending on current bootloader version). I also had a myriad of other issues along the way, but I found out the steps to a perfect fix for my LG Optimus L9 P769! I was also able to flash the following ROMs with this method: V20H (T-Mobile) and V10B (MetroPCS MS769 — less bloat, MUCH easier to clean with NoBloat).
This process will fix the following issues:
“LG Security Error” msg on boot
“Problem with Communication with phone” error during offline flash method
“Phone not detected!” error during flashing with “KZD_FW_UPD”
Unable to Download / flash with the latest LG customer support tool/PC Suite
Please read the following posts and give thanks:
Offline Flash method:
http://forum.xda-developers.com/showthread.php?t=2085344
Fastboot repair bootloader method:
http://forum.xda-developers.com/showthread.php?t=2292828
You will need:
Small http server running with modified hosts file (link above)
Fastboot package (link above)
Flash package (link to post below)
Instructions:
I randomly messed around and I got the flasher working! Massive thanks to djallen1 for the package—I don’t know if this version happens to have anything different. Here’s how I did it:
1. (using Win7 x64, used the flash package from this post: http://forum.xda-developers.com/showpost.php?p=51639161&postcount=2)
2. I used fastboot to flash ICS x-boot/boot (option 5 here: http://forum.xda-developers.com/showthread.php?t=2292828 )
3. YOU NEED ICS bootloader. Phone will not be detected by tool if you are on JB!!!
4. I uninstalled MSXML (from previous attempts)--not sure if this mattered
5. I uninstalled C:\ProgramData\LGMOBILEAX\B2C_Client (from previous attempts)--not sure if this mattered
6. I set Windows Enabler and UpTextEx to Run in XP SP3 Compatibility mode + Run as admin checked
7. I took a shot in the dark and ran KDZ_FW_UPD as administrator
8. Used “3GQCT” + “EMERGENCY” mode, and selected the KDZ file to flash
9. Put the phone in “S/W Update” mode (press Vol Up, insert battery, insert USB cable)
10. Go into Device Manager (right click “My Computer, click “Manage”, then “Device Manager”)
11. I disabled the “LGE Mobile USB Modem #X” (listed under the “Modems” section)
12. Then click “Launch Software Update”
13. Software update [KDZ] will display two lines, “Launching SW Update” and “Unpacking KDZ”
14. [KDZ] WILL FREEZE / display “Not Responding” THIS IS OK. WAIT PATIENTLY.
15. The window will unfreeze/un-grey out and you will see “|Param = xx” updates. This is the “progress bar”—when you reach 100%, it will restart and your phone will be alive again! (fyi, I had “Model Dll Msg Not Found(200x, 0)” messages throughout this flashing process)
16. Do a Hard Reset (press Power, Vol Down, Home until LG logo shows up, then release power)
17. ENJOY!
Click to expand...
Click to collapse
I have my chioy is eazy than this
http://forum.xda-developers.com/showthread.php?t=2686746
Hi..
I have come across threads asking "how to install stock latest firmware on rooted devices"
or " No OTA updates on rooted devices"
So are you tired of searching the stock firmware ???
Here is the Guide to upgrade your phone with the latest firmware on Samsung Galaxy Grand 2 using Samsung Kies 3
NOTE : This processes will unroot your device & install the latest firmware from Samsung.
Things required :
A computer (Windows OS /MacOS) ,Kies 3 software, USB cable,Samsung Galaxy Grand 2 (SM-G7102 in my case) & last but not least an active internet connection.
Steps :
Install Samsung Kies
Open Kies
Click on Tools
Firmware Upgrade and Initialization.
(Pop up window will appear)
Enter the device Model Number/Name (ie "SM-G7102" in my case) Note : Must be in uppercase.
& OK
Now Enter the S/N ( serial number) found on the sticker in the battery compartment
OR
From your phone go to Settings-->General -->About device --> Status-->Serial Number. Note : Must be in uppercase.
& Ok
Click Ok again.
Check Initialized Version of the firmware
To Proceed click OK
Check mark on Terms & Condition
Allow Saving
Turn off your phone
Go to download mode on your phone ( press volume down, home and power buttons at the same time until Warning!! appears on the display & press volume up key in order to enter download mode )
Connect your device
&
Click on Start Upgrade :good:
Note : wait till the process get complete & do not unplug device during the upgrade process.
phone do not open it is sub brick
pearlborpuzari said:
hi..
i have come across threads asking "how to install stock latest firmware on rooted devices"
or " no ota updates on rooted devices"
so are you tired of searching the stock firmware ???
here is the guide to upgrade your phone with the latest firmware on samsung galaxy grand 2 using samsung kies 3
note : This processes will unroot your device & install the latest firmware from samsung.
things required :
A computer (windows os /macos) ,kies 3 software, usb cable,samsung galaxy grand 2 (sm-g7102 in my case) & last but not least an active internet connection.
steps :
install samsung kies
open kies
click on tools
firmware upgrade and initialization.
(pop up window will appear)
enter the device model number/name (ie "sm-g7102" in my case) note : Must be in uppercase.
& ok
now enter the s/n ( serial number) found on the sticker in the battery compartment
or
from your phone go to settings-->general -->about device --> status-->serial number. note : Must be in uppercase.
& ok
click ok again.
Check initialized version of the firmware
to proceed click ok
check mark on terms & condition
allow saving
turn off your phone
go to download mode on your phone ( press volume down, home and power buttons at the same time until warning!! Appears on the display & press volume up key in order to enter download mode )
connect your device
&
click on start upgrade :good:
note : Wait till the process get complete & do not unplug device during the upgrade process.
Click to expand...
Click to collapse
any one tried this in kitkat 4.4.2? not working to me
abilash10 said:
any one tried this in kitkat 4.4.2? not working to me
Click to expand...
Click to collapse
Flash stock firmware by odin,
Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
wilywizzzz said:
Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
Click to expand...
Click to collapse
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
No GO
It aid This device's version cannot be updated
wilywizzzz said:
No GO
It aid This device's version cannot be updated
Click to expand...
Click to collapse
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
440bro said:
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
thank you it worked with your instructions
But not the first and to clear things up I did put in SGH-I717 in ALL CAPS
Thank you
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
crazydads said:
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
Click to expand...
Click to collapse
Sorry you're having trouble. I've never came across someone with a loop at optimization before. Maybe you can try to re download the file and repeat the process again. You might have a corrupt download.
Hey,
I got Polaroid S20EG tablet, a few minutes ago, I tried to install Lollipop firmware which should work as I think, that's not the issue.
I used RKDevelopment Tools 1.37 and I did as these instructions:
Instructions (be aware: it is your own risk!)
1. connect your Odys Iron to the power supply and to the PC via USB cable
=========
first install only
2. boot your Oyds Iron and set storage mode to MTP and debugging to USB
3. run DriverInstall.exe
=========
4. run RKAndroidTool.exe with admin rights
5. press power button and volume up button and hold for 12 sec
6. release the power button
7. release volume up button 2 sec after "Found ..." is shown
8. select EraseIDB
9. select Run
10. Iron will boot into CWM
11. release a factory reset
12. go back, reboot system (do not fix su)
13. wait 4 min
Have fun!
Click to expand...
Click to collapse
Rom: crewrktablets.arctablet.com/?p=5617
I stopped at "select Run" cause It said "LoaderFile is not Existed" after googling it, I found out that I gotta choose a loader file, I downloaded the one on the page above and pressed Run. After that the tablet got disconnected (Status changed to: "No Found RKAndroid rock usb")
NOTE: I choose only Loader!
It doesn't start anymore :crying::crying::crying:
Please, please any help would be appreciated.....
Problem: I used the wrong bootloader and now it doesn't turn on at all, I got backup of the original bootloader.. how I can flash it back? the device is not recognized anymore