Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
wilywizzzz said:
Can someone help me uninstall cyanogenmod procedures and restore my ATT note SGH- I717
The phone is acting up big time:
Shutting off on it's own and sometimes reboot by itself, also it flickers
Thank you
Click to expand...
Click to collapse
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
No GO
It aid This device's version cannot be updated
wilywizzzz said:
No GO
It aid This device's version cannot be updated
Click to expand...
Click to collapse
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
440bro said:
That's funny because it works for me! Are you sure you put in SGH-I717 in ALL CAPS?
Here's another method.
Download this file http://www.mediafire.com/download/g7gn29h7nu63id5/I717UCMD3_I717ATTMD3_ATT.zip
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
thank you it worked with your instructions
But not the first and to clear things up I did put in SGH-I717 in ALL CAPS
Thank you
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
crazydads said:
ok I have do like you have posted with oden and i get to where oden says paassed....now i keep getting Android is upgrading...optimizing apps loop...now what
Click to expand...
Click to collapse
Sorry you're having trouble. I've never came across someone with a loop at optimization before. Maybe you can try to re download the file and repeat the process again. You might have a corrupt download.
Related
One of the phones I picked up to resell.
Anyways its flashed with:
Carbon Rom - nightly 20130625-0418
CWM Recovery - 5.5.0.4
And on kernal:3.0.72-cyanogenmod-g2c1e1a3
How can i revert all back to factory?
Semborski said:
One of the phones I picked up to resell.
Anyways its flashed with:
Carbon Rom - nightly 20130625-0418
CWM Recovery - 5.5.0.4
And on kernal:3.0.72-cyanogenmod-g2c1e1a3
How can i revert all back to factory?
Click to expand...
Click to collapse
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
can you do this coming from a custom rom?
Yes you can.
Not to be a jerk... but if you bought a device to sell...
Why don't you put in the work of searching for this answer that's been gone over for over a year?
You are trying to make money doing this... usually jobs require effort.
How to flash I9082XXUBMF2 Android 4.2.2 Jelly Bean on Samsung Galaxy Grand Duos GT-I9082 device:
Download the leak Android 4.2.2 Jelly Bean I9082XXUBMF2 file from here "https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html?expire=1" and save it in your PC.
Now, extract the downloaded file and get a tar.md5 file together with a few other files.
Download Odin 3.07 , save it on the PC, extract its content and get Odin 3 v3.07 exe file and other some files.
Power off complete the Samsung Galaxy Grand device.
Now, boot the smartphone into Download Mode. To do that press and keep holding the Home + Power + Volume Down buttons on the same time.
Open Odin3 v3.07.exe file with the administrator rights.
Next, connect the Samsung Galaxy Grand device to PC, for making this use the USB cable while the device is in Download mode.
Now, just look on the Odin interface to make sure that the ID: COM box turn yellow with the proper COM port number and an Added message will be displayed, that means the smartphone is connected successfully,
In case the Added message isn’t displayed try to connect the device on another USB port. If the Odin application still fails to recognize the connection between the device and PC re-install the suitable USB driver once again.
Now, after the connection between Android device and PC is successfully realized, and the ODIN confirmed that you have to select these files extracted from I9082XXUBMF2 folder to flash the same on the smartphone:a) From ODIN click the PDA button, search and load the .tar.md5 file
b) Now, click the Phone button, search and load the file with MODEM in its name.
c) Next, click the CSC button and load the file with CSC in its name.
d) Click the PIT button from ODIN, search and load the .pit file.
Note: Ignore these steps in case the file from step b, c and d isn’t existing.
Important: You have to configure the Odin settings. In ODIN window make sure that the Auto Reboot and F.Reset Time checkboxes are selected. Uncheck the Re-Partition option from ODIN window select it, only in case a .pit file is being used (loaded previously).
Now, when you want to start the installation process, click the Start button in Odin app.
The flashing process should start immediately, and you need to wait about few minutes to be done.
Now, when flashing process is successfully completed, the ODIN app will say a PASS message with a green background very top of the Odin app, and the Samsung Galaxy Grand device will restart automatically.
After restart, you can disconnect safety the USB cord from the PC.
Congratulation, now the Samsung Galaxy Grand Duos should running on the leaked official Android 4.2.2 XXUBMF2 Jelly Bean firmware.
Verify if the new firmware is running on the smartphone, to do that navigate to the following path Settings>> About phone and note down the firmware version running on the smartphone.
Troubleshooting:
In case the Android device gets stuck at the first booting animation or it is entering on a bootloop you have to do:
Place the device in the recovery mode, to do this press and keep holding the Home+ Power + Volume UP buttons on the same time.
Now, from the Recovery Mode select Wipe data/factory reset and after that select wipe cache partition option.
Next, back on the main menu of Recovery Mode and from there select reboot system now option.
Dont forget to hit thanx
Wat about my warrenty after update?
Sent from my GT-I9082 using xda premium
tanmay5 said:
How to flash I9082XXUBMF2 Android 4.2.2 Jelly Bean on Samsung Galaxy Grand Duos GT-I9082 device:
Download the leak Android 4.2.2 Jelly Bean I9082XXUBMF2 file from here "https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html?expire=1" and save it in your PC.
Now, extract the downloaded file and get a tar.md5 file together with a few other files.
Download Odin 3.07 , save it on the PC, extract its content and get Odin 3 v3.07 exe file and other some files.
Power off complete the Samsung Galaxy Grand device.
Now, boot the smartphone into Download Mode. To do that press and keep holding the Home + Power + Volume Down buttons on the same time.
Open Odin3 v3.07.exe file with the administrator rights.
Next, connect the Samsung Galaxy Grand device to PC, for making this use the USB cable while the device is in Download mode.
Now, just look on the Odin interface to make sure that the ID: COM box turn yellow with the proper COM port number and an Added message will be displayed, that means the smartphone is connected successfully,
In case the Added message isn’t displayed try to connect the device on another USB port. If the Odin application still fails to recognize the connection between the device and PC re-install the suitable USB driver once again.
Now, after the connection between Android device and PC is successfully realized, and the ODIN confirmed that you have to select these files extracted from I9082XXUBMF2 folder to flash the same on the smartphone:a) From ODIN click the PDA button, search and load the .tar.md5 file
b) Now, click the Phone button, search and load the file with MODEM in its name.
c) Next, click the CSC button and load the file with CSC in its name.
d) Click the PIT button from ODIN, search and load the .pit file.
Note: Ignore these steps in case the file from step b, c and d isn’t existing.
Important: You have to configure the Odin settings. In ODIN window make sure that the Auto Reboot and F.Reset Time checkboxes are selected. Uncheck the Re-Partition option from ODIN window select it, only in case a .pit file is being used (loaded previously).
Now, when you want to start the installation process, click the Start button in Odin app.
The flashing process should start immediately, and you need to wait about few minutes to be done.
Now, when flashing process is successfully completed, the ODIN app will say a PASS message with a green background very top of the Odin app, and the Samsung Galaxy Grand device will restart automatically.
After restart, you can disconnect safety the USB cord from the PC.
Congratulation, now the Samsung Galaxy Grand Duos should running on the leaked official Android 4.2.2 XXUBMF2 Jelly Bean firmware.
Verify if the new firmware is running on the smartphone, to do that navigate to the following path Settings>> About phone and note down the firmware version running on the smartphone.
Troubleshooting:
In case the Android device gets stuck at the first booting animation or it is entering on a bootloop you have to do:
Place the device in the recovery mode, to do this press and keep holding the Home+ Power + Volume UP buttons on the same time.
Now, from the Recovery Mode select Wipe data/factory reset and after that select wipe cache partition option.
Next, back on the main menu of Recovery Mode and from there select reboot system now option.
Dont forget to hit thanx
Click to expand...
Click to collapse
Hey man i wiped my data and cache partition but even after that it gets stucked what should i do?
Sent from my GT-I9082 using xda premium
just got my i717R(locked with Rogers), tried to root the gadget but failed.
I flashed with the wrong BOOT.IMG file and the cellphone keeps stuck on SAMSUNG LOGO screen.:crying::crying::crying:
I have wiped the factory data and partition from the android recovery mode, which is the original one not CWM one.
Also once I tried to connect with ODIN and flash a CWM recovery, but it seems disconnect with the computer.
What should I do now? Please help !!!:crying::crying::crying::crying::crying:
You can try kies emergency recovery.
Kies will get you the latest firmware available for your device.
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
440bro said:
You can try kies emergency recovery.
Kies will get you the latest firmware available for your device.
1. On a PC open
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
Click to expand...
Click to collapse
Thank you so much !!! i am going to do it right now. Hope it will work.
PS. I just install the CWM recovery with another laptop. seems sth wrong with mine...
After that, I download the CM10 ATT rom and install from CWM recovery but it failed again.
Is there any idea what's wrong with it?
guojiachang said:
Thank you so much !!! i am going to do it right now. Hope it will work.
PS. I just install the CWM recovery with another laptop. seems sth wrong with mine...
After that, I download the CM10 ATT rom and install from CWM recovery but it failed again.
Is there any idea what's wrong with it?
Click to expand...
Click to collapse
There is another problem. The Kies forced to stop update the rom automaticlly which really drived me crazy.
And I think the problem is that Kies is not able to connect with my cellphone.
Anybody can help???
One UI 3.0 beta has been released for Galaxy A51 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
You may also roll back to One UI 2.5 or update to stable One UI 3.0, when it's released with this method:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
Thank you for your support and I hope I helped you!
Added SD Card Method too!
Added Odin Method!
Hi do you have a link for the one ui3.0 firmware cheers
Hello,
I'm currently trying to install lineage 17.1 and following the instructions from https://wiki.lineageos.org/devices/j7elte/install but after i install the recovery img it wont boot the factory reset menu.
This is my first time doing something like this, i'm not a power user so please be kind.
hello there, i see but can you please be more specific describing the problem, like attaching some pictures, what steps did you do or anything else that can be helpful, so the others can help your way out?
It was my fault, i didn't see it was volume up for recovery mode. But at the moment i have a much bigger issue. My device needs a firmware update but i cannot find the exact model. The one under the battery is just a basic version i presume so i cannot find the appropriate firmware.
what is it? j700f or j700m?
Just post the code you see that the above person posted.
It might be on the battery or on the box the phone came with.
It starts with SM-
J700h.
I downloaded a file from sammobile but it's single tar.md5 file don't know how to use it.
ah, you nneed odin, download it and put the tar.md5 file to AP field
Download Odin3
and dont forget to put the phone to download mode too
I recommend one of the patched versions cause they error less
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Keno_I said:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Click to expand...
Click to collapse
except that in this case you only need to put the file to the AP only
Keno_I said:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Phone) push Power + Volume Down buttons, while pushing them plug-in USB-cable to PC. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
Click to expand...
Click to collapse
7th step is the issue atm. The zip i downloaded contains just one tar.md5 file inside
DifferentPlays said:
except that in this case you only need to put the file to the AP only
Click to expand...
Click to collapse
okay then. just start? or do i need to check AP box?
Yeah, I couldn't type on my useless iPhone so I copied it from a text file I used to instruct people how to install firmwares with Odin.
Yeah only AP is needed so keep that in mind.
Although odin mode is red the bar is moving right now.
I'll update the result.
Dermenc said:
Although odin mode is red the bar is moving right now.
I'll update the result.
Click to expand...
Click to collapse
If it is flashing then no worries.
Samsung logo flashing.
Dermenc said:
Samsung logo flashing.
Click to expand...
Click to collapse
?
If it's not too idiotic can i install lineage after this? Or would that be dangerous?