Right guys after successfully flashing my partners phone to make it run better i used the Siyah safe kernel 5.0.1 and vanilla rootbox ROM.
i tried the performance option in the kernel options and it was draining the battery big style.
So... decided to re-flash the kernel and put it in battery mode for optimized battery performance and now all i get is a black screen. ive done a factory reset and I've wiped the dalvik cache and fixed permissions but still a black screen straight after the kernel logo.
What have i done wrong? how do i get the phone to boot again?
Cheers Brett
twiztednibbz said:
Right guys after successfully flashing my partners phone to make it run better i used the Siyah safe kernel 5.0.1 and vanilla rootbox ROM.
i tried the performance option in the kernel options and it was draining the battery big style.
So... decided to re-flash the kernel and put it in battery mode for optimized battery performance and now all i get is a black screen. ive done a factory reset and I've wiped the dalvik cache and fixed permissions but still a black screen straight after the kernel logo.
What have i done wrong? how do i get the phone to boot again?
Cheers Brett
Click to expand...
Click to collapse
You can still get to Recovery and Download mode,right? Then flash a Stock Sammy ROM via Odin,then do a Factory reset.
GamingDj said:
You can still get to Recovery and Download mode,right? Then flash a Stock Sammy ROM via Odin,then do a Factory reset.
Click to expand...
Click to collapse
Yeah man. I just ended up flashing the rom again and it worked fine. I was trying to just switch form performance to battery
twiztednibbz said:
Yeah man. I just ended up flashing the rom again and it worked fine. I was trying to just switch form performance to battery
Click to expand...
Click to collapse
It woked? Then press the thanks button
Related
Help me please. i was on firmware:
I9300XXBLFB_I9300OXABLFB_I9300XXLFB
i was having problems with wifi so i did factory reset and flashed the stock rom:
GT-I9300_BTU_I9300XXALE8_I9300OXAALE8_I9300XXLE8.tar
i go through the setup phase and i theres an update so i update the phone to
GT-I9300_BTU_I9300XXALF2_I9300OXAALF2_I9300XXLF2
all good.
when i hold the power button down and click turn off, the phone turns off but then it automatically starts up again. this is doing my head in. i flashed the phone 3 times back to stock ROM but still when the phone turns off it auto turns on again. please help
One factory reset .
Two wipe cache and dalvik cache and install stock rom .
OR
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery install root and cwm if needed
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
thanks man, gonna try that. gonna go for the second method formatting cache data etc
JJEgan said:
One factory reset .
Two wipe cache and dalvik cache and install stock rom .
Click to expand...
Click to collapse
is that wipe cache partition? the second method didnt work. turned phone off and it auto turned on
Now, I know this seems like a stupid question, have you got the phone plugged in to either a pc or external power?
I have a few phones that restart when plugged in to a power source. Might be a feature of the rom you are using.
Just a thought...
nope its disconnected from pc and ex power
still doesnt work?
HELP
take aut battery wait 10sec go dawnload mod and flash again stock rom
Sent from my GT-I9300 using xda premium
CONGRATULATION!!!! you very lucky to have me have this problem before.. change the bustard kernel!! that kernel make it like this. i spend 12 hours to configure this ****.
i have taken battery out and flashed stock rom. and ascariz did you turn your phone off and and did it automatically turn on the phone? which kernel shall i flash?
10076757 said:
i have taken battery out and flashed stock rom. and ascariz did you turn your phone off and and did it automatically turn on the phone? which kernel shall i flash?
Click to expand...
Click to collapse
yes.
depend on you. if you want to stick with stock, then you gonna need to find stock kernel other than this one.
if you ok with custom kernel, just flash cf-root kernel, then use triangle to reset binary count, then install mobile odin to flash speedmod kernel.
or
if you ok to break your warranty, just go for cf-root kernel, then flash speedmod kernel.
or
just flash speedmod kernel..
FIXED
ascariz said:
congratulation!!!! you very lucky to have me have this problem before.. Change the bustard kernel!! That kernel make it like this. I spend 12 hours to configure this ****.
Click to expand...
Click to collapse
thank you man u are a legend. It was the kernel that kept on turning my phone on. I flashed siyah kernel and all is good. Thanks
10076757 said:
thank you man u are a legend. It was the kernel that kept on turning my phone on. I flashed siyah kernel and all is good. Thanks
Click to expand...
Click to collapse
no need to thank me..XDA have put a lot of works to put THANKS BUTTON in the XDA..we all can use it..
Hi guys,
I have an S2 which I installed JB v5.. On to and all seemed OK except I had an issue with the screen going blank during calls. I posted a ? On the forum and some suggested Siyah Kernel which I downloaded to solve the prob......... Prob now is when ever I reboot it comes up with System UI has stopped. This in itself isn't a real issue because I can use CWM and reboot back to original back up of ICS.
My question is why would this be happening, is it a matter of just trying another Kernel (to solve my original prob of the blank screen)
I would like to keep Siyah and use JB if possible as they appear good but I am very new to all this so any suggestions are appreciated
Thanks
JB = JellyBam..? Which version of Siyah did you try? It's important you flash the right one Look at the changelog on www.gokhanmoral.com.
Sent from the Matrix
In the CWM try to wipe dalvik, wipe cache, file permission,wipe factory reset. then restart again
rapnix said:
In the CWM try to wipe dalvik, wipe cache, file permission,wipe factory reset. then restart again
Click to expand...
Click to collapse
Why do a factory reset if it's just a kernel/flash-issue? It seems he just flashed the wrong version.
Sent from the Matrix
Phone stats
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+
android Version-4.0.4
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Phone Stats
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+CWM
android Version-4.0.4
jB-jelly Bam-5.2.0_i9100Stable
CWM-SuperSU -v0.99
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Morieson said:
Thanks for the replays
Phone stats
kernel -3.0.31-Siyah-S2-v5.0.1+CWM
android Version-4.0.4
jB-jelly Bam-5.2.0_i9100Stable
CWM-SuperSU -v0.99
Let me know if you need any more info
I was pretty sure I'd only downloaded the correct stuff but it was late at night
Thanks
Click to expand...
Click to collapse
Try kernel v4 instead. If you still have issues you will need to wipe data/factory reset. You can backup everything via Titanium Backup Pro.
If you still have issues you will need to use a kernel/rom cleaning script like these. Once you have cleaned rom/kernel of old leftover files you can do a fresh install of rom then kernel.
I've been running 10.1.2, but this morning was notified of update. So I installed the update.
However, the update killed my Wi-Fi, in that I was getting signal, but no internet connection.
So I tried to roll back to 10.1.2, but now have the constant CyanogenMod loading animation and it's been like it for an hour. So I held down the power and volume button and it does exactly the same thing, reboots and get's stuck with the animation?
I can't turn if off or anything?
Can someone please help?
WannabeMKII said:
I've been running 10.1.2, but this morning was notified of update. So I installed the update.
However, the update killed my Wi-Fi, in that I was getting signal, but no internet connection.
So I tried to roll back to 10.1.2, but now have the constant CyanogenMod loading animaition and it's been like it for an hour. So I held down the power and volume button and it does exactly the same thing, reboots and get's stuck with the animation?
I can't turn if off or anything?
Can someone please help?
Click to expand...
Click to collapse
Have had similar problems would love a dev input here,think it has something to do with having to separately flashing a compatible kernel? Or a bug in cm recovery when whipe? Anyways flash meow kernel and ROM, then in twmp recovery wipe all under advanced, then reinstall cm, that should fix it for you.
cantenna said:
Have had similar problems would love a dev input here,think it has something to do with having to separately flashing a compatible kernel? Or a bug in cm recovery when whipe?
Click to expand...
Click to collapse
Frustrating, whatever it is...
cantenna said:
Anyways flash meow kernel and ROM, then in twmp recovery wipe all under advanced, then reinstall cm, that should fix it for you.
Click to expand...
Click to collapse
Sorry, but how do I do that?
Can anyone assist please, as I'm pretty stuck at the moment. Thanks.
WannabeMKII said:
Can anyone assist please, as I'm pretty stuck at the moment. Thanks.
Click to expand...
Click to collapse
Download cm-10.2-20131029-UNOFFICIAL-pollux_windy.zip from here
http://www.windowsxlive.net/xperia-ztablet-z-cyanogenmod-10-2-fidelity-edition-build-20131029/
wipe factory reset in cwm recovery and install rom
once booted into new rom reset into twmp recovery
wipe and advanced wipe all check boxes except last and iinstall cm rom
should boot now. let me know if it works for you. Did for me.
also see
http://forum.xda-developers.com/showthread.php?t=2383800
also side note, i upgraded to sony stock 4.2.2 befire goingbto custom
Perfect. I managed to get into CWM, cleared all the old data and re-installed 10.1 that was still on the SD card. I then installed Gapps and updated CM, but not to the latest this time!
Thanks for the help, I can relax now and the Mrs can now go on Facebook again
WannabeMKII said:
Perfect. I managed to get into CWM, cleared all the old data and re-installed 10.1 that was still on the SD card. I then installed Gapps and updated CM, but not to the latest this time!
Thanks for the help, I can relax now and the Mrs can now go on Facebook again
Click to expand...
Click to collapse
Anytime, happy wife, happy life!
cantenna said:
Anytime, happy wife, happy life!
Click to expand...
Click to collapse
Lol, so true! :laugh:
Need a quick advise.
I've been running with SLIM stable 4.2.2 for many weeks now without any issues.
Yesterday the battery was drained accidentally after a radio app was left running for many hours.
After recharging with the phone off, I turned it on, and the SLIM logo stayed on forever.
Re-booted into recovery and wiped caches, re-booted and still stuck on slim logo.
Re-flashed rom and gapps, wiped caches, and it went past the slim logo, did the upgrading android process, then got stuck on starting apps.
any ideas how to fix this ?
kalda01 said:
Need a quick advise.
I've been running with SLIM stable 4.2.2 for many weeks now without any issues.
Yesterday the battery was drained accidentally after a radio app was left running for many hours.
After recharging with the phone off, I turned it on, and the SLIM logo stayed on forever.
Re-booted into recovery and wiped caches, re-booted and still stuck on slim logo.
Re-flashed rom and gapps, wiped caches, and it went past the slim logo, did the upgrading android process, then got stuck on starting apps.
any ideas how to fix this ?
Click to expand...
Click to collapse
This is my reply to your post in Slim's post:
Did you do a FULL wipe with /system formatted? If you did, try to flash another the ROM to see if you can get through, then re-flash Slim. Good luck.
wolftou said:
This is my reply to your post in Slim's post:
Did you do a FULL wipe with /system formatted? If you did, try to flash another the ROM to see if you can get through, then re-flash Slim. Good luck.
Click to expand...
Click to collapse
I'll try. thanks. was hoping I could avoid a full wipe. not sure why draining the battery would screw up the rom
kalda01 said:
I'll try. thanks. was hoping I could avoid a full wipe. not sure why draining the battery would screw up the rom
Click to expand...
Click to collapse
Are you using AJK Kernel? If so try to reset STweaks Profiles and fix permissions.
Hello,
I am running Slim Bean 4.1.1 on my Galaxy S2 for almost one year now. I never had any bigger issues with this rom until yesterday. My battery died so I plugged the charging device in and re-started the phone but the booting animation won't go away. I am caught...I can still get into the recovery but that's it.
Any ideas how to solve this issue?
Thanks in advance
travisbotello said:
Hello,
I am running Slim Bean 4.1.1 on my Galaxy S2 for almost one year now. I never had any bigger issues with this rom until yesterday. My battery died so I plugged the charging device in and re-started the phone but the booting animation won't go away. I am caught...I can still get into the recovery but that's it.
Any ideas how to solve this issue?
Thanks in advance
Click to expand...
Click to collapse
Let the battery charge a bit until you boot it up, then see if you can boot into the rom. If you can't, boot into recovery and wipe regular cache and dalvik.
Best practice is to never let your battery die - these older devices (and some new ones as well) sometimes don't respond well to a complete discharge.
SteveMurphy said:
Let the battery charge a bit until you boot it up, then see if you can boot into the rom. If you can't, boot into recovery and wipe regular cache and dalvik.
Best practice is to never let your battery die - these older devices (and some new ones as well) sometimes don't respond well to a complete discharge.
Click to expand...
Click to collapse
Thanks!! I tried wipe cache and dalvik. Now I was stuck in the "android is upgrading starting apps" loop. So I just decided to do a full wipe and re-install everything...
travisbotello said:
Thanks!! I tried wipe cache and dalvik. Now I was stuck in the "android is upgrading starting apps" loop. So I just decided to do a full wipe and re-install everything...
Click to expand...
Click to collapse
If you're going to do a full wipe why not just upgrade to KK? The JB Slim isn't supported anymore, but @cyril279 has a few options for you, should you chose that route:
SlimSaber: http://forum.xda-developers.com/showthread.php?t=2772468
SlimKat: http://forum.xda-developers.com/showthread.php?t=2760074
SteveMurphy said:
If you're going to do a full wipe why not just upgrade to KK? The JB Slim isn't supported anymore, but @cyril279 has a few options for you, should you chose that route:
SlimSaber: http://forum.xda-developers.com/showthread.php?t=2772468
SlimKat: http://forum.xda-developers.com/showthread.php?t=2760074
Click to expand...
Click to collapse
That makes sense. I just upgrade to SlimSaber...and I love it. :victory: This morning I was soo p*ssed because of this whole thing but sometimes it just needs an event like this to try out new things
Thanks again!