Hello,
I have a weird problem, I put CM 10.1.0 RC5 on my Motorola Razr xt910 and the mic stopped working when in calls.
This is most probably not a hardware issue since it works fine during video recording and I am able to hear the sounds just fine then.
But the person on the other end cannot hear me when I make/receive a call.
Also, whenever I try to open voice search or google search mic icon then I get an error "Unfortunately google search has stopped working" and the application does not open up.
I updated the RC5 to 10.1.0 stable and then also put on yesterdays nightly, no luck, everything else works except the mic during calls.
Any pointers to what I should do to get this resolved?
Thanks,
Saket
Related
Strange that no one has written about this issue?
In Android 4.2.2 (CM10.1, AOKP) not working voice dialing over Bluetooth.
Program crashes, you can not give a voice command through BT headset.
Did anyone find a solution to this problem?
Sorry for my bad english...
im on Omega 4.2.2 and i have the same problem.i tryed also S-Voice.I have a zip file for S-Voice to flash over Recovery.It is working but i dont now how to set it to default App when i want to use it over Bluetooth...Everytime i start my hands free function in the car the default app is opening and freez my phone...
Also a problem with AOKP is navigon over a2dp.the sound is very very low.im searching for a solution for it now for 2 weeks....
maybe the next update will fix...
kulek79 said:
Strange that no one has written about this issue?
In Android 4.2.2 (CM10.1, AOKP) not working voice dialing over Bluetooth.
Program crashes, you can not give a voice command through BT headset.
Did anyone find a solution to this problem?
Sorry for my bad english...
Click to expand...
Click to collapse
I have the same problem, would love to find a solution! Also, very often I can't hear any audio (phone or media) though the bluetooth even though it is properly connected. I have to turn the bluetooth device on and off, and after a few tries it starts working again...
Also experiencing the same
Hi, I have the same issue. Handsfree was working fine in 4.1.2, upgraded to CM 10.1 (4.2.2) and I hear no sound, nor does the other side of the call hear me. I then switched to AOKP(4.2.2), but still the same issue continues.
Did anyone here find a solution?
mikemtlv said:
Hi, I have the same issue. Handsfree was working fine in 4.1.2, upgraded to CM 10.1 (4.2.2) and I hear no sound, nor does the other side of the call hear me. I then switched to AOKP(4.2.2), but still the same issue continues.
Did anyone here find a solution?
Click to expand...
Click to collapse
Somebody gave me a solution when I posted this on another forum (unfortunately XDA doesn't allow me to post the link but here is the solution):
In your apps manager wipe the cache/data for bluetooth share!
That worked for me to solve the audio issue, but voice dialling still hangs.
Bluetooth Voice Dial
I have same problem. Bluetooth works fine with headset, car kit and motorcycle headset until i try the "press button to voice dial" on whatever headset is connected.
I am running SlimBean v4.3 stable version on SGS2 GT-i9100
I am unable to ask devs direct as i cannot post in dev forum on the ROM.
Stumped and really want to get solved. Have tried using Google Now, SVoice, and !Utter but none seem to work. Voice dial on all including voice dialler app work fine when used with no bluetooth but when i press the magic button, voice dialler pops up and freezes.
Hudba přes Bluetooth
Čau , mám Samsung Galaxy S2 s cyanogenmod 10.1.3 a androidem 4.2.2 . Problem mi nastal s tím , že mi nejde hudba do Bluetooth sluchátek . Hovory fungují bez problému. Pak mi nejde přes Bluetooth volat s aplikaci Viber : Rolleyes:Setkal se už někdo s tím? Děkuji
pezzz74 said:
I have same problem. Bluetooth works fine with headset, car kit and motorcycle headset until i try the "press button to voice dial" on whatever headset is connected.
I am running SlimBean v4.3 stable version on SGS2 GT-i9100
I am unable to ask devs direct as i cannot post in dev forum on the ROM.
Stumped and really want to get solved. Have tried using Google Now, SVoice, and !Utter but none seem to work. Voice dial on all including voice dialler app work fine when used with no bluetooth but when i press the magic button, voice dialler pops up and freezes.
Click to expand...
Click to collapse
I ended up going to NeatRom and Aroma which unfotunately puts me back on 4.1.2 which has the annoying "wobble" when using bluetooth every xx secs.
rom 4.2.2
You try a different view 4.2 stars
Hello,
I have a weird problem, I put CM 10.1.0 RC5 on my Motorola Razr xt910 and the mic stopped working when in calls.
This is most probably not a hardware issue since it works fine during video recording and I am able to hear the sounds just fine then.
But the person on the other end cannot hear me when I make/receive a call.
Also, whenever I try to open voice search or google search mic icon then I get an error "Unfortunately google search has stopped working" and the application does not open up.
I updated the RC5 to 10.1.0 stable and then also put on yesterdays nightly, no luck, everything else works except the mic during calls.
Any pointers to what I should do to get this resolved?
Thanks,
Saket
saketkale said:
Hello,
I have a weird problem, I put CM 10.1.0 RC5 on my Motorola Razr xt910 and the mic stopped working when in calls.
This is most probably not a hardware issue since it works fine during video recording and I am able to hear the sounds just fine then.
But the person on the other end cannot hear me when I make/receive a call.
Also, whenever I try to open voice search or google search mic icon then I get an error "Unfortunately google search has stopped working" and the application does not open up.
I updated the RC5 to 10.1.0 stable and then also put on yesterdays nightly, no luck, everything else works except the mic during calls.
Any pointers to what I should do to get this resolved?
Thanks,
Saket
Click to expand...
Click to collapse
The mic randomly muting is a known issue in kexec kernel/ROMs.
However generally it works after a reboot.
Check your stock ROM if mic is working there or not.?
Sent from my XT912 using Tapatalk 2
neo.ank said:
The mic randomly muting is a known issue in kexec kernel/ROMs.
However generally it works after a reboot.
Check your stock ROM if mic is working there or not.?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
It was working for a few days but with reduced volumes.
I also did check by going into Stock and it does not work there too. The error that I get there is also same, the search crashes.
Reboot wont help because I did it many times after reading a couple of forum responses.
Thanks,
Saket.
saketkale said:
It was working for a few days but with reduced volumes.
I also did check by going into Stock and it does not work there too. The error that I get there is also same, the search crashes.
Reboot wont help because I did it many times after reading a couple of forum responses.
Thanks,
Saket.
Click to expand...
Click to collapse
Then its a hardware fault. As you said it worked with reduced volume, also suggests the same.
Get to the customer support and get it replaced.
Sent from my XT912 using Tapatalk 2
neo.ank said:
Then its a hardware fault. As you said it worked with reduced volume, also suggests the same.
Get to the customer support and get it replaced.
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Yes, but it works during video/sound recording.
Is the mic used different at these times or is it the same?
saketkale said:
Yes, but it works during video/sound recording.
Is the mic used different at these times or is it the same?
Click to expand...
Click to collapse
Its the secondary mic. It is used for noise cancellation too.
Sent from my XT912 using Tapatalk 2
Secondary/Camcorder mic
The primary mic on this machine is soldered on the PCB!!!
Is it possible to use an app or a system tweak/mod to force the use of the secondary/camcorder mic? Have not found anything yet.
cibic89 said:
The primary mic on this machine is soldered on the PCB!!!
Is it possible to use an app or a system tweak/mod to force the use of the secondary/camcorder mic? Have not found anything yet.
Click to expand...
Click to collapse
Same here!
I've been changing the order in audio_policy.conf but no success... Does anybody know how we can force the phone to avoid using front mic?
I've been using the nightlies for about a month now and recently installed the M1 snapshot. In both the nightlies and M1 the speaker phone does not work while in a call. I can hear the caller but they can't hear me as if the mic is muted. Also, things like voice commands doesn't work either in Google Now for instance. I searched the CM Jira bug tracker, but the only report of this I could find has been closed as not an issue. I saw someone else reporting this problem in a thread here and was wondering if anyone knows of a fix/workaround or is having the same problem.
speakerphone mic
splittheatom said:
I've been using the nightlies for about a month now and recently installed the M1 snapshot. In both the nightlies and M1 the speaker phone does not work while in a call. I can hear the caller but they can't hear me as if the mic is muted. Also, things like voice commands doesn't work either in Google Now for instance. I searched the CM Jira bug tracker, but the only report of this I could find has been closed as not an issue. I saw someone else reporting this problem in a thread here and was wondering if anyone knows of a fix/workaround or is having the same problem.
Click to expand...
Click to collapse
Have had the phone 4 days. on VZW. last night caller complained she couldn't hear me (I use the speakerphone almost without exception). Again this morning. Called a friend and we tested.. he could hear me when I talked in regular mode and as soon as I turned on the speakerphone, I could still hear him but I was muted. Called VZ. reboot with/out sim card etc.. they know nothing. A buddie at VZ reset some stuff and nothing. said to return the phone.. might try a full reset first.. love to know of a fix. Thx!
UPDATE: took the phone into VZW and exchanged it.. hours of set-up.. but so far so good.. really like the phone...
Hello guys,
I've been having this issue for a while now, whenever I use (or even open) a VoIP software (Skype, Viber, Textfree etc.), my headphones stop working and I can't hear anything through them if I play any video or audio. Weirdly, my headphones work when I make calls through those softwares but even after I quit them, I cannot get sound through my headphones until I restart the phone. Speakers work fine in any case.
I noticed it first on Cyanogenmod 4.2.2 but it has persisted through Liquidsmooth 4.3.1 and CarbonROM 4.3.1. I would appreciate any help on how to fix this annoying issue.
Thanks,
So after updating to CM12
Whatsapp voice notes over internal speakers isn't working
Viber call too, have to activate loud speakers to be able to hear although regular phone calls works fine.
This is an known bug which stopping me from using CM12... I hope our developers will soon find a fix for this.