Hey everyone,
A while back I rooted my device, but I was not able to install a recovery so I eventually gave up, but my device is still rooted.
Long story short, now I want my S3 unrooted, but here's the kicker.
I bought my S3 in Canada with Rogers as my carrier. But shortly after that, I moved to the states and I signed up for att, popped a new SIM card in my S3, and changed my WAP settings so it would work with att. But since I bought it in Canada with Rogers as my carrier, when I unroot my device, would the process be specific to Rogers Canada, or Att USA?.
Also a side note, when I installed the stock ROM through Odin, the rogers version worked, and att did not.
My model number is the i747m
Any thoughts or suggestions would be greatly appreciated.
Thanks!
You can download the stock rom for rogers i747m and reflash that with odin:
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-canadian-galaxy-s3-sgh-i747m-stock-roms/
Related
I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
shaodx said:
I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
Click to expand...
Click to collapse
If you have a AT&T i717 chances are you will not get office Bell ICS. There are a few way of getting tethering to work, BTW.
1) Flash official AT&T ICS, use tethering app like FoxFi
2) Flash official AT&T ICS, root it, use hacks such as Ultracfg trick
3) obviously, flash custom ROMs
4) Wait until devs use Canadian ROMs as base*
* P.S. Not seeing that happen soon though since folks already on LF5 or LF6 but Canadian ROMs (at least for Bell) is only on LF4.
You can use TELUS Stock ICS;
http://forum.xda-developers.com/showthread.php?t=1771979
There is NO carrier bloat at all on TELUS ICS.
Much appreciated, guys. I will try the Telus ROM first.
After using odlin to flash boot and system, system halts on Telus LTE page.
No idea if it's caused by AT&T modem because I did not flash it yet.
Anyway, go back to AT&T official ROM and use FoxFi now.
I have the Samsung Galaxy S II i9100M, which is the Bell Mobility (Canada) variant. Same hardware as the i9100 and capable of running roms for the international version; only difference is the crapload of bloatware Bell Mobility had installed on it.
Though a Canadian phone, the phone worked well using a T-Mobile SIM here in the US. After tinkering with Odin and a couple of ROMs I flashed the phone from a stock Gingerbread ROM to a leaked version of Samsung's 4.2 Jellybean ROM, made for the i9100, a couple months before the update on Kies was ready. Unfortunately, I sim-locked the phone, the cause I assume is a missing CSC file.
Does anyone know how to fix this problem? I have been told already by one phone unlocking company that to restore the CSC file I have to flash a new one. Will I have to flash a ROM with the proper CSC file then have someone unlock the device with a sim unlock code or can I just flash a CSC no sim-unlock needed? I NEED HELP PLEASE!!! I screwed up, and it's really annoying having a smartphone that works for everything but making phone calls or texting (the irony).
PICS I HOPE WILL HELP ARE ATTACHED
I recently unlocked and rooted my AT&T Galaxy S5 to use on T-Mobile network. However I still have AT&T firmware on the phone, and I'd really like to flash cyanogenmod, or at at the very least stock T-Mobile. Is there any way to do this? Thanks in advance!
Demeos said:
I recently unlocked and rooted my AT&T Galaxy S5 to use on T-Mobile network. However I still have AT&T firmware on the phone, and I'd really like to flash cyanogenmod, or at at the very least stock T-Mobile. Is there any way to do this? Thanks in advance!
Click to expand...
Click to collapse
Don't know if there is a Cyogenmod available for your model (SM-G900A) but there is an AllianceRom which is built off the T-mobile SM-G900T firmware which will work on the AT&T S5. However, since that version of the S5 has a locked bootloader you will need to use Safestrap Recovery instead of TWRP. You might want to look among the threads in the AT&T S5 area of this forum for more information and maybe ask your question there. I brought my unlocked AT&T S5 over to T-mobile and used it for a few months before getting a T-mobile S5. AT&T stock s5 firmware worked fine. I also did try out AllianceRom on that phone briefly but stick with stock. I don't think rom slots ever got fixed on Safestrap so only the stock rom slot could be used for flashing which is one of the reasons I chose to stick with stock on that phone.
..
Hello
I have an AT&T i337 with the stock rom android 4.4.2 ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar
I am not sure if this is a US or Canadian phone but the phone is unlocked and I can root. My question is, can I flash a Canadian Bell rom onto this phone. I have tried to do this and odin says it is a good rom but it won't flash to my phone.
Thank you
I purchased unlocked ATT Tab S7 5G and I'm to remove everything with ATT since i'm using T-mobile network. I install T-mobile rom through Odin but only thing that was updated is from Android 11 to 12. I'm trying to remove ATT bloatware and wanted T-mobile startup screen and T-mobile standard apps. After everything install correctly from Odin, I can't get ATT out. Servie provider software version is still showing ATT. Am I doing something wrong?