Related
I have a bricked Hermes, I am not able to flash it.
Is it possible to flash a hermes, when it starts till the following picture ?
And I have no usb-connection via active sync, only with the Multi-Port TTY.
No I've read that I can flash it in the bootloader-modus with the command "wdatah " ?
So i pu in following:
USB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>
USB>set 1e 1
USB>wdatah HERMIMG.nbh
Invalid parameter number!
USB>
So what is wrong ?
data is sent in blocks, you can't flash with mtty.
and how can I flash ?
I've also tried it with "hermimg.nbh" on the micro-sd card.
But it only shows loading... and then checking ... and nothing more.
Bundy said:
and how can I flash ?
I've also tried it with "hermimg.nbh" on the micro-sd card.
But it only shows loading... and then checking ... and nothing more.
Click to expand...
Click to collapse
first... what bootloader are you running.
secondly... what's wrong with your phone?
....thirdly what were you doing when the phone became faulty?
first ... i have SPL 1.04 and bootloader 107
secondyl... my phone doesn't start - first it looks like a tv with no antenna and with some numbers at the botton - also no gsm
and then i see the blue "windows-mobile" screen.
thirdly - i have flashe my device and since the flashing the hermes doesnt start
I think I've tries everything - but nothing helped
Try to flash HTC 1.18 rom with bootloader 1.04 and run the RUU two times. If this doesn't work try to flash a radio using HERMflasher.
pof said:
Try to flash HTC 1.18 rom with bootloader 1.04 and run the RUU two times. If this doesn't work try to flash a radio using HERMflasher.
Click to expand...
Click to collapse
Aha this should work because the device was already in bootloader when we ran the RUU for a second time, how we got past CID check in the early days?
Makes sence to try this.
I try it...
Must I start it in bootloader-mode ?
and have I to activate active-sync or disable it ?
Bundy said:
Must I start it in bootloader-mode ?
Click to expand...
Click to collapse
yes
Bundy said:
and have I to activate active-sync or disable it ?
Click to expand...
Click to collapse
disable
So, I've done it serveral times...
After the first time - Error222 : Device not responding
After the 2nd time - Error 250 - Update Error
and I have done it a 3rd time - Update Error again.
why can't i flash the hermes with my micro-sd ?
Bundy said:
secondyl... my phone doesn't start - first it looks like a tv with no antenna and with some numbers at the botton - also no gsm
and then i see the blue "windows-mobile" screen.
thirdly - i have flashe my device and since the flashing the hermes doesnt start
I think I've tries everything - but nothing helped
Click to expand...
Click to collapse
i have the same, except that the reason is that i touched the usb cable and it disconnected and when i try to put the firmware, i have error 260
yes, I have also ERROR260 and not 250. Sorry...
And what have you done with your device ?
I have the same problem! It seem that there in no connection between the pc and pda... Other methods to update? I tried with the micro-sd too... It starts, but when it checks, so it freeze... Maybe the CID of the pda and the ROM's one is different?
Bundy said:
So, I've done it serveral times...
After the first time - Error222 : Device not responding
After the 2nd time - Error 250 - Update Error
and I have done it a 3rd time - Update Error again.
Click to expand...
Click to collapse
I have the same problems. Put WM6 on my device. Now I have the Error 222. Also when I put HERMIMG on a SD card he do nothing. The difference between your device and mine is, that i boot the device but can't change any data. Don´t know what to do....
I am just trying the hermflasher.
Does anyone know how long the flash will last ?
There is no progress shown - only FLASH NBH on the device.
You should not flash a NBH, you should flash a radio: extract GSM.nb from the NBH file and flash it using the command 'hermflasher -F radio GSM.nb'.
@pof :
I've done what you said - and it works.
At start i have the strange screen (like a tv without antenna) but then it works.
Now I have : ROM-Version 1.25.207.2
Funkempf. 1.03.03.10
Prot. 32.34.7010.01H
Thanks a lot for your help.
And now, I consider to put another ROM on it (WM6 ?). to get at least a normal screen at startup.
First consider puting HardSPL to avoid bricking it again
Then flash any NBH containing the splash screens and you'll get the boot screen back
...tried to unlockit with the athena-unlocker! After Step 1 it startet to Step2 und suddenly the connection was lost!
Now the battery lamp of the Ameo is in green mode!
I can make a factory reset, but I see no bootloader mode!
Screen is black an a green light aroundthe joystick! The Connection via active sync to my pc isn't available any mory!
What do you think?
game over - any change to bring my Ameo back to life?
Edit1: ther is no MiniSd Card inside
Hi, I do not think your Ameo is lost. Some else hat the same problem, please check http://forum.xda-developers.com/showpost.php?p=1358430&postcount=35 and try the steps described there. In most cases, it is also possible to flash WM6 if your device is stuck in the bootloader.
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
...you were right - thx a lot 4 the solution
stupiddog said:
There are two things I would like you to try:....
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Thx a lot
Jackpot thx -
Kisses from Austria
Many thx!
utakurt said:
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Click to expand...
Click to collapse
You're welcome, have fun with WM6 However, if you want to kill the SIM-Lock/Net-Lock on your device, you have to run the unlocker again. It seems that WM5 has some problems running the unlocker while WM6 does not.
After you successfully run the unlocker again, remember to flash your WM6 ROM again (watch the battery power, it should always be >50% before starting flashing!) so you have the newest Radio version.
If problems persist after flashing, this page in the XDA wiki might be helpful: http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
stupiddog said:
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
Hi, mate
Wot if those two things does not work??
i mean
if we can not get into boot loader or hard reset
i have this ameo does not go into boot loader or does not do hardreset
only red light on the joystick
problem occured while unlocking with Olipro, completing step 1 (got stuck at the point of saving the spl file)
thank you very much in advance for your help
BR,
Hi does anyone know if there are WM6 ROMs for the SPV C550 if not are there any good WM5 ones?
look topic about wm5 for hurricane, there are also links to wm6 for hurricane device
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Has anybody tried this ROM?
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Ideal thanks
So is the 566.zip the WM5 or WM6 rom and has it been tested?
Whats the new SPL?
hI ALL, can u tell me the mini guide how to install this rom? I did it once to my sda but I dont remember now, where is the nbfupdatetool and RUU and patched RUU..???
when I type l c:\wm6.bin it give me this:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000 MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
cmd>
maybe damaged rom, or any idea?
Gang: Make sure you're CID unlocked. (Eg, when you issue "info 2", it says HTCSuperCID).
How can do that cid unlock? give me some working link to download that tool or something. thx
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
hmm, thx for guide, I believe it will work, but I have little problem : now I cant even connect to activesync so I cant do cid unlock, any idea how to fix that
lazaj007 said:
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
Click to expand...
Click to collapse
Thanks for helping out!
A few questions?
1. This link "http//www.spv-developers.com/content/SPV-Services.zip" takes me to Wikipedia.
2. Where can I find the patched ruu to update the spl. It wasn't in the zip file?
Thanks in advance!
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
gangstaunitg said:
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
Click to expand...
Click to collapse
DoH! I didn't notice the missing ":"
Cheers!
Anybody have idea why I cant connect to activesync after spl upgrade ? Before spl upgrade it all goes well. Can I do something with it?
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
I did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THank u all, thankS
This rom is amazing, everything work perfect, and it looks beautiful,
one more time thank you. jUUHHHUUUUUUUUU
lazaj007 said:
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
Click to expand...
Click to collapse
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
MrMiyagi said:
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
Click to expand...
Click to collapse
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
MrMiyagi said:
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
Click to expand...
Click to collapse
Heh heh ... seems I'm posting to myself ... that's cool I like my own company ... So I reflashed the SPL and some of the problems have gone away.
Phone will boot OK now ... but it will still "go to blank screen" and require plugging into the USB cable to "wake it up"
I'm out of ideas now ...
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
you mast flash with bootloader this rom
http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
and then you can flash any rom
Ok thanks for reply ;-)
I test it ...
:-(
I download this ROM, but it is not functional :-(.
Same problem Device has reboot on 4% flash process :-( :-(.
Any ideas ??? Pls
i have your problem and when i flash, all rom stopped 4%, because are rom cocking. the only one that no stopped was http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html. try again.
when stopped 4% what error appear?
error code
:-( I try flash ROM from you, but same problem. Just i Flash ROM: RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
Flashing process is without a problems, but on 4% my oxygen reboot...
And flash utility write: ERROR [294]: INVALID VENDER ID
I dont know how next, thx for reply...
Hi Jurig
What did you do?
I have the same problem!!
Hard Spl Not Work
You must make hardSPL part boot and not install another version of Statistics is not compatible with HTC Oxygen.Y have 1.005.0000 SPL means that no longer kent install another rum. If you folow carefully written and why not install all the rrom with the SPL and OS but only the bone y had not separate that issue. The only solute is imei-check.co.uk order to unlock part of boothloader and will save the phone.
Thanks Geo 2000
How can I make Hard SPL? The phone is HALTED on splash screen!
I can't synchronise with PC so I can't copy anything to phone memory.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
(I have SPL 1.70.0000)
Thanks friends
There had to install the archive with the bone and spl.Had to extract with Nbextract.exe and Htcrt.exe to recover rom only with the bone. had to do with the first date HardSPL method posted here: http://forum.xda-developers.com/showthread.php?t=340283 after those install rom respectively.Yf no longer open Windows no longer can repair only by sal the program from imei-check.co.uk. good luck
jurig said:
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
Click to expand...
Click to collapse
Try to make hard-reset..
How to do the Hard Reset?
Please help...
My Oxy is halted on HTC logo splash screen...
RA
abramq said:
Please help...
Click to expand...
Click to collapse
Press and keep two top soft-keys. Press "Power".
Wait (keep two top soft-keys!) until message "Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Reyter said:
"Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Click to expand...
Click to collapse
Oh, thans, but... there is: "Press Send key to restore..."
Where is the "Send" key? (pressing "0" doesn't help)
Probably death of my good Oxy...:-((
RA
send key is your dial number key
nemphis said:
send key is your dial number key
Click to expand...
Click to collapse
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Press "Green" button
abramq said:
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Click to expand...
Click to collapse
What SPL are you? IF YOU DO NOT 7.77.7777 and 1.05.0000 MAY CANT NOT DO NOTHING. If you 7.77.7777 May settled once rom.not matter which of them install only itself to be part of the bone
SOLVED)
Thanks to good man it is ok now
http://forum.xda-developers.com/showthread.php?t=391602&page=4
RA
Not Solved for me!
I downloaded that "Russian signed" rom and tryed to flash my Orange SPV C100 (equivalen to Htc Oxygen): Same problem, the operation failed and the phone restarts at 4%
(My SPL version is 1.07.0000)
Hello there! I changed the rom to AP Dual 3 and now the X7500 restart and install all the problem as the first time when the rom launch.
The 3 colours are strange.
Here are some screenshot:
What can I do? Because the rom restart everytime
Thanks!
Read this: http://forum.xda-developers.com/showthread.php?t=408815
cktlcmd said:
Read this: http://forum.xda-developers.com/showthread.php?t=408815
Click to expand...
Click to collapse
Thanks for your answer. I am from Argentina, my english is not good. I tried to read everything but I can't understand how to solve it.
Do I have to download spl 1.2?
To be honest, I don't know. I own a X7510.
I suggest posting your question on the similar thread. I just suggested that thread because the screen description you showed is similar to the other one. Good luck.
By the way, how did you end up with that screen? It might be solved if you flash it again with the original ROM.
mercadocel said:
Thanks for your answer. I am from Argentina, my english is not good. I tried to read everything but I can't understand how to solve it.
Do I have to download spl 1.2?
Click to expand...
Click to collapse
1) check your SPL version. To do this push STRONG the camera button and TOGETHER push the small reset button in the back.
You will see a tri-colour screen , read the model ID ATHE100 (?) and the SPL (1.2? 3.5?) soft reset again to go back. if the model ID is scrambled... you are in trouble. Ask CMONEX help with a PM or follow the instructions from here http://forum.xda-developers.com/showthread.php?t=405604
2) from this thread http://forum.xda-developers.com/showthread.php?t=397518 choose the ROM you want PAY ATTENTION to chose the correct SPL version
3) Follow the link, download the ROM, enjoy
I press STRONG camera en reset but I can't enter in bootload mode, the screen turn grey and says "Loading..."
How can I fix it? =(
mercadocel said:
I press STRONG camera en reset but I can't enter in bootload mode, the screen turn grey and says "Loading..."
How can I fix it? =(
Click to expand...
Click to collapse
Hi
Remove memory card and the sim card from the phone.
Then Vol down+reset (Hard reset).
Then Press strong on camera button+reset then you get the Boot loader.
Then Flash your device's original rom if your device not on SPL 1.2 or SPL 3.5
Good luck
sabes143 said:
Hi
Remove memory card and the sim card from the phone.
Then Vol down+reset (Hard reset).
Then Press strong on camera button+reset then you get the Boot loader.
Then Flash your device's original rom if your device not on SPL 1.2 or SPL 3.5
Good luck
Click to expand...
Click to collapse
Thanks! I solved =)
Thanks for all the help!