Phone Model: DROIDZ Force
Brand: sprd
CPU hardware: SP6820a
CPU Model: ARMv7 Processor
CPU frequency: 400.0 ~ 1000.0 Mhz
Screen Resolution: 320 x 480
GPU vendor: ARM
GPU renderer: Mali-300
GPU version(OpenGL): OpenGL ES 2.0
Memory Size (Total): 160.0 MB
RAM Size(Total): 205.3 MB
Android version: 2.3.5
Build Number: DRZ_Force-2.3.6_012013
Kernel: Linux Version 2.6.35.7([email protected])
(gcc version 4.4.3(GCC)) #5
Here's my system info. I could not access my adroid system using adb ?
Is there any alternative method to root this? Please help !! http://forum.xda-developers.com/images/smilies/crying.gif
Related
Hello,
I bought a tablet without a name. I would like to install CWM to make a backup of the rom. How do I do?
Rom Manager says: device not listed above
The tablet is already Root
Phone model: TAB950
Brand: DJIX
Hardware CPU: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 30 ~ 1200MHz
Screen resolution 800x432
Screen density 160dpi
Render GPU: Mali-400MP
Android version: 4.04
Kernel: Linux version 3.0.8 +
Feel free to change the forum if I'm wrong
Thank you for helping me
Help
Hi
I have a phone model from Singapore. I want to upgrade OS 4 Jelly Bean. Is there any Rom that suit my model?
Model: SGT-X40
Sim: Dual Sim
Network: GSM, WCDMA
CPU hardware: MT6575
CPU model: ARMv7 Processor
CPU frequency: 1024 MHz
Screen Resolution: 480 x 800 (4.0")
GPU vender: Imagination Technologies
GPU version: OpenGL ES 2.0
Memory size: 222.1 MB
RAM size: 475.3 MB
Android version: 2.3.6
Hello:
I need the original Rom of my Feiteng N9300.
Antutu says it is:
GT-I9300
Brand: sprd
CPU: SP6820A
CPU Model: ARMv7 Processor (VFPv3,NEON)
Frecuency: 400 - 1000 Mhz
Screen:320x480
GPU: ARM Mali-300
Memory avaliable/total:52,9/180 Mb
RAM size: 59,207,3 MB
Camera: 0,3
Android version: 4.0.3
Build Number: MocorDroid2.2.2.W12.09.11
IMEI: 352709000238881
Kernel: 2.6.35.7
Thank you
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Yes I'm searching for the same thing... A junior of my asked me to help him... all I got was this... maybe this works.. try at your risk..http://forum.xda-developers.com/showthread.php?t=2004264 ...this thread shows how to root and install CWM recovery... Give me thanks if i helped
how it possible? have u facebook or whatsapp?
rokrifat said:
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Click to expand...
Click to collapse
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this