Suitable Custom Rom for my special device ... GLX T3 tablet - Android Q&A, Help & Troubleshooting

Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.

Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:​Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this

Related

[Q] How to root "spreadtrum phone" using ubuntu?

Phone Model: DROIDZ Force
Brand: sprd
CPU hardware: SP6820a
CPU Model: ARMv7 Processor
CPU frequency: 400.0 ~ 1000.0 Mhz
Screen Resolution: 320 x 480
GPU vendor: ARM
GPU renderer: Mali-300
GPU version(OpenGL): OpenGL ES 2.0
Memory Size (Total): 160.0 MB
RAM Size(Total): 205.3 MB
Android version: 2.3.5
Build Number: DRZ_Force-2.3.6_012013
Kernel: Linux Version 2.6.35.7([email protected])
(gcc version 4.4.3(GCC)) #5
Here's my system info. I could not access my adroid system using adb ?
Is there any alternative method to root this? Please help !! http://forum.xda-developers.com/images/smilies/crying.gif

NEED HELP!!!!!

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

[q] need help please!!!!!

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Can anyone help change the Android version of the firmware?

Hello guys !
I would like to update the android on my phone. But the manufacturer did no more updates for it . Someone who understands please could put this firmware 4.2 for 5.1 or 6 ?
Original phone firmware:
https://mega.nz/#F!cAQ2HASR!2gUXEmevN5N6uhF8eAFDQg
Photos:
https://images.colombo.com.br/produtos/616800/616800_1223_g.jpg
http://img.olx.com.br/images/98/987616027766881.jpg
Specifications:
Mediatek: mediatek MT6572 - 1,00 ghz
cores: 2
Architecture: 2x ARM Cortex-A7 @ 1,00Ghz
Revision: r0p3
Process: 28nm
GPU Renderer: Mali-400mp
Model: TX340I (kt07_szy_v_wcdma)
Manufacturer: alps
Brand: JTY
Hardware: mt6572
Screen Size : 7
scree resolution: 480x 800 pixels
RAM: 512
Android version: 4.2.2
API level: 17
Bootloader: unknown
Build id: KT07.3G-20150209
Java VM- Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv7I
Kernel Version: 3.4.5 (unknown)
Identical Model device :
https://www.irulu.com/tablet/p-irulu-expro-x2-7-inch-phablet-gps-bluetooth-3g-phone-tablet-pc_1933422.html
https://en.wikipedia.org/wiki/List_of_devices_using_Mediatek_SoCs#MT6572
Help ! :highfive:

My Phone Closing Every Change

Hi. My phone closing (freezing) every ROOT change. I'm rooted with super su. Device İnfo:
DevCheck Report
Vestel
Venus Z10
May 28, 2019 1:43
Uptime: 7m 46s
Deep sleep: 0s (0%)
HARDWARE
Qualcomm® Snapdragon™ 435
Hardware: MSM8940
Cores: 8
CPU:
Cortex-A53
Process: 28 nm
Frequencies:
960 MHz - 1401 MHz
768 MHz - 1094 MHz
Governor: interactive
GRAPHICS
Vendor: Qualcomm
GPU: Adreno (TM) 505
OpenGL: OpenGL ES 3.2 [email protected] ([email protected], I1ef8061d77) (Date:03/28/18)
Max frequency: 475 MHz
Resolution: 1920 x 1080
Screen density: 423.63602 ppi
Screen size: 5.2 in / 132 mm
Panel: boe td4300 1080p video mode dsi panel
RAM
RAM size: 4.0 GB
Type: LPDDR3 933 MHz
OTHER HARDWARE
Bluetooth support: yes
Bluetooth LE support: yes
USB host support: yes
Infrared transmitter: no
NFC support: no
DEVICE
Model: Venus Z10
Codename: Reys
Manufacturer: Vestel
Serial Number: 2787379617001405
SYSTEM
Android Version: 8.1.0 (Oreo)
Build: VR2230 release-keys
Security patch: September 1, 2018
Root access: Device is rooted
Architecture: aarch64 (64-bit)
Instruction sets: arm64-v8a armeabi-v7a armeabi
Kernel: 3.18.71-perf

Categories

Resources