NEED HELP!!!!! - Android Q&A, Help & Troubleshooting

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Related

[q] need help please!!!!!

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Prestigio Custom ROM needed

Hello.
Have a Prestigio Multipad 4 Diamond 10.1 d3g PMP7110
I can not find any newer ROM for my tablet.
Searched but nothing!
Can some one help me out?
Still working with Android 4.2.2.
Rooted tablet but problems with the recovery. Some recovery will be nice.
Thanks a lot.
up
:good::good::good:
unlock bootloader?
custom recowery?
rom?
on the oficial site no download for this tablet
main is stuck on the logo screen
after reset
fastboot working:
recowery working:
Thnx:silly:
FOXCONN INTERNATIONAL HOLDINGS LIMITED PMT7177_3G
SYSTEM (Android 4.2.2)
Model: PMT7177_3G
Manufacturer: Foxconn International Holdings Limited
Device: PMT7177_3G
Product: PMT7177_3G
Brand: Prestigio
Android Version: 4.2.2 (Jelly Bean)
API Level: 17
Build ID: JDQ39
Fingerprint: Prestigio/PMT7177_3G/PMT7177_3G:4.2.2/JDQ39/1395112725:user/release-keys
DISPLAY (1280x800)
Size: 1280x800
Refresh Rate: 57.95 Hz
Default Orientation: Landscape
Physical Size: 10.03" (25.47 cm)
Logical Size: Extra Large
Density: 160 dpi (Medium)
Pixels Per Inch: X: 150.52; Y: 150.52
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 2 (v7l)
Cores: 4
Max Frequency: 1209 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (970 MB)
System RAM: 970 MB
JVM Max Memory: 96 MB
Internal Storage: 13379 MB
External Storage: 13329 MB (Emulated)

Suitable Custom Rom for my special device ... GLX T3 tablet

Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:​Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this

Obscure tablet

Hello everyone, I hope I'm posting in the right spot. I have a China tablet, listed as an Overmax K80, (possibly a Lenovo clone). I'm trying to install a recovery, like TWRP or CWM. There is currently no recovery in this device and it has proven to be unrootable. I've included what I think is the most relevant identifying info below. If more is required, I'll do my best to provide it. Thank you for all the help I have found here in the past, and for any guidance on this tablet. Cheers, and the best of the holiday season from Canada eh.
Manufacturer Overmax
Model K80
Android version 7.0; 1536319863; SDK23
CPU 8 cores; ARMv7 Processor rev 3 (v7l) MT6580; Max: 1500,0 MHz; Min: 604,5 MHz
Display 1280 x 800; DPI: 210; Evaluated Size: 7,2"
Touch screen NOT multitouch 1 point
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB (984 MB available)
Flash 16 GB (14.561 GB actual); 0.5 GB (0.468 GB actual); 32 GB (31.251 GB actual)
KERNEL: Linux version 3.18.19 ([email protected]) (gcc version 4.8 (GCC) ) #77 SMP PREEMPT Tue Sep 4 11:15:34 CST 2018
CODENAME: REL
Mainboard: unknown
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: flycom6580_we_m
DISPLAY: E960V1.0_HJC_01_3G_HNHBOE_GTTP_FL_WXGA_V0.1_2018-09-07
FINGERPRINT: alps/full_flycom6580_we_m/flycom6580_we_m:6.0/MRA58K/1536319863:user/test-keys
HARDWARE: mt6580
ID: MRA58K
TAGS: test-keys
I have the same thing...
But I'm looking to change it's OS.
The OS is some limited not working well piece of $#!" that I can't even upgrade.
So... if you found a way to root it and a system to install on it... that would be great.

Make Custom ROM + Add ROOT for Unbranded Chinese Tablet [HW: MT6797] [Model: TAB910]

I had just received this unbranded Chinese tablet. I shocked when I see its properties as it is all differ from seller description (ram, rom, android version ... etc ) all are fake. I just need to upgrade this too old android version which it kills me to a higher version. I can't download many app or install apk of them like "zoom cloud meetings app" it needs android 5+
Any one can help me as I hove no any experience in this issue. I searched for a custom rom but I did not found any thing except that thread https://forum.xda-developers.com/android/software-hacking/hw-mt6582-make-custom-rom-add-root-t3877701/page46
I did not try it as the tablet mentioned in that thread I think differ than mine. Is there any one can help me and check if this rom matchs my tablet or not? Any effort is highly appreciated.
Notice simple English words is better as English is not my mother tongue
Ok, this is the data I got by AIDA64 app from my tablet.
<<< System >>>
Manufacturer: Jlinksz
Model: TAB910
Hardware: mt6797
Serial: 0123456789ABCDEF
Installed RAM: 8 GB
Total Memory: 8112 MB
Internal Storage Total Space: 127.13 GB
Bluetooth Version: 4+
<<< CPU >>>
SoC Model: MediaTek Helio X20 (MT6797)
Core Architecture: 4x ARM Cortex-A53 @ 2300 MHz
4x ARM Cortex-A53 @ 2300 MHz
2x ARM Cortex-A72 @ 2300 MHz
Manufacturing Process: 20 nm
Instruction Set: 64-bit ARMv8-A (32-bit Mode)
<<< Android >>>
Android Version: 4.4 (KitKat)
API Level: 19
Rooted Device: Yes
Android ID: ecd60217258ebac4
Baseband: MOLY.WR8.W1315.MD.WG.MP.V54, 2020/04/01 11:16
Build ID: TAB910_vEN52S3_20200416
Codename: REL
Fingerprint: G-tab/P789/P789:6.0/MRA58K/20180320.145903:user/release-keys
ID: KOT49H
Incremental: vEN52S3
Java Runtime Version: Android Runtime 0.9
Java VM Version: Dalvik 1.6.0
Java VM Heap Size: 128 MB
Kernel Architecture: armv7l
Kernel Version: 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Thu Apr 16 10:47:37 CST 2020
Tags: release-keys
Type: user
Google Play Services Version: 20.26.14 (000300-320008519)
Huawei Mobile Services Version: < Not Present >
OpenSSL Version: OpenSSL 1.0.1e 11 Feb 2013
ZLib Version: 1.2.8
ICU CLDR Version: 23.0
ICU Library Version: 51.1.0.1
ICU Unicode Version: 6.2
<<< Display >>>
Screen Resolution: 800 * 1280
Screen Size: 97 mm × 155 mm
Screen Diagonal: 7.19 inches
Pixel Density: 210 dpi
xdpi / ydpi: 210 / 210 dpi
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Refresh Rate: 59 Hz
<< USB Device - Linux 3.4.67 musb-hcd MUSB HDRC host driver >>
Manufacturer: Linux 3.4.67 musb-hcd
Product: MUSB HDRC host driver
Serial: musb-hdrc.0
Device ID: 1D6B-0002
Device Class: 09 / 00 (Hi-Speed Hub with single TT)
Device Protocol: 01
Revision: 0304
Supported USB Version: 2.00
Current Speed: 480 Mbps
nee the same help
This looks totaly fake , I also have a device with same device id
cheap Chinese devices are made with a give a F attitude sometimes. leave a bad review and move on.

Categories

Resources