Prestigio Custom ROM needed - Android Q&A, Help & Troubleshooting

Hello.
Have a Prestigio Multipad 4 Diamond 10.1 d3g PMP7110
I can not find any newer ROM for my tablet.
Searched but nothing!
Can some one help me out?
Still working with Android 4.2.2.
Rooted tablet but problems with the recovery. Some recovery will be nice.
Thanks a lot.

up
:good::good::good:
unlock bootloader?
custom recowery?
rom?
on the oficial site no download for this tablet
main is stuck on the logo screen
after reset
fastboot working:
recowery working:
Thnx:silly:

FOXCONN INTERNATIONAL HOLDINGS LIMITED PMT7177_3G
SYSTEM (Android 4.2.2)
Model: PMT7177_3G
Manufacturer: Foxconn International Holdings Limited
Device: PMT7177_3G
Product: PMT7177_3G
Brand: Prestigio
Android Version: 4.2.2 (Jelly Bean)
API Level: 17
Build ID: JDQ39
Fingerprint: Prestigio/PMT7177_3G/PMT7177_3G:4.2.2/JDQ39/1395112725:user/release-keys
DISPLAY (1280x800)
Size: 1280x800
Refresh Rate: 57.95 Hz
Default Orientation: Landscape
Physical Size: 10.03" (25.47 cm)
Logical Size: Extra Large
Density: 160 dpi (Medium)
Pixels Per Inch: X: 150.52; Y: 150.52
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 2 (v7l)
Cores: 4
Max Frequency: 1209 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (970 MB)
System RAM: 970 MB
JVM Max Memory: 96 MB
Internal Storage: 13379 MB
External Storage: 13329 MB (Emulated)

Related

NEED HELP!!!!!

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

[q] need help please!!!!!

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Suitable Custom Rom for my special device ... GLX T3 tablet

Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:​Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.​
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this

My Phone Closing Every Change

Hi. My phone closing (freezing) every ROOT change. I'm rooted with super su. Device İnfo:
DevCheck Report
Vestel
Venus Z10
May 28, 2019 1:43
Uptime: 7m 46s
Deep sleep: 0s (0%)
HARDWARE
Qualcomm® Snapdragon™ 435
Hardware: MSM8940
Cores: 8
CPU:
Cortex-A53
Process: 28 nm
Frequencies:
960 MHz - 1401 MHz
768 MHz - 1094 MHz
Governor: interactive
GRAPHICS
Vendor: Qualcomm
GPU: Adreno (TM) 505
OpenGL: OpenGL ES 3.2 [email protected] ([email protected], I1ef8061d77) (Date:03/28/18)
Max frequency: 475 MHz
Resolution: 1920 x 1080
Screen density: 423.63602 ppi
Screen size: 5.2 in / 132 mm
Panel: boe td4300 1080p video mode dsi panel
RAM
RAM size: 4.0 GB
Type: LPDDR3 933 MHz
OTHER HARDWARE
Bluetooth support: yes
Bluetooth LE support: yes
USB host support: yes
Infrared transmitter: no
NFC support: no
DEVICE
Model: Venus Z10
Codename: Reys
Manufacturer: Vestel
Serial Number: 2787379617001405
SYSTEM
Android Version: 8.1.0 (Oreo)
Build: VR2230 release-keys
Security patch: September 1, 2018
Root access: Device is rooted
Architecture: aarch64 (64-bit)
Instruction sets: arm64-v8a armeabi-v7a armeabi
Kernel: 3.18.71-perf

Please port android 4.4 to trekstor surfpad 8.0

Hi guys. Can you port android 4.4 to trekstor surfpad 8.0? I will be happy if it will be done.
Here is the nandroid backup
Here is the specs:
Device: MID ST80208-1
Soc: Amlogic Meson6 g04 customer platform
Cores: 2
Clock speed: 48 MHz - 1,51 GHz
GPU: ARM Mali-400 MP
Os: Android jellybean 4.1.1
API level: 16
Display size: 8"
Resolution: 1024x768
Ram size: 877 MB

Categories

Resources