Custom ROM for Pantel IS709C - Android Q&A, Help & Troubleshooting

Hello Everyone,
I have a Penta IS709C tablet with specifications as follows:
Operating System Android 4.0.4
SOC Rockchip RK2906 (Basically a RK2918 SOC without HDMI Output)
Processor Cortex A8 1.0 GHz
GPU Vivante GC800 Graphics Engine
RAM 512MB (~323MB Available)
Internal Memory 4GB (~2.04GB Available)
External Memory Expandable up to 32 GB with a TF (Micro SD) Card
Display Type LCD
Display Size 7 Inch
Touch Type Multi-touch Capacitive
Sensors
Accelerometer (MMA8452Q – Present and Active/Enabled),
Light Sensor (AL3006 – Present but Inactive/Disabled),
Magnetic Field Sensor (AK8975 – Present but Inactive/Disabled),
Orientation Sensor (AL3006 – Present but Inactive/Disabled)
Proximity Sensor (AL3006 – Present but Inactive/Disabled)
Camera 0.3 MP
Speakers Stereo Speakers
Battery Capacity 3000 mAh
USB Port Mini USB (On-the-Go)
Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n
Connectivity Supports 2G and 3G USB Dongles (GSM and CDMA)
I have rooted it and am looking for a good custom ROM (Jelly Bean preferred) for it (one which can enable all disabled kernels and more importantly the kernel which supports RAM swapping. Can some one help me get one?. I also have the firmware (update.img) for it and am ready to share it with someone, who is willing to create a custom ROM out of it.
Thanks for all your help....

Have I posted on the wrong place? Or is it so that there is no one kind enough to help me? It has been more than 24 hours, but I have not had any responses.
Please help....
Sent from my Full AOSP on Rk29sdk using xda app-developers app

Hey,
I'm quoting some fellow RCs I asked about this:
Oh a Rockchip tablet?
Oma's ROMs for the RK2918 should be able to help
Click to expand...
Click to collapse
I used to own a couple different rockchip tablets, only place I know of developers working on those is freaktab.com have him talk to finlessbob who knows the ins and outs of these.
Or here on xda have him search for the nextbook premium 7, there are a couple devs who worked on that tab here and made a few custom ROMs, I and a few others tried to get cwm on it and failed but the way you flash those things it isn't needed for custom ROMs kernels etc, its all done with the flash tool.
Click to expand...
Click to collapse
Let me know if you have other questions, and I'll forward them.
Good luck

Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
GermainZ said:
Hey,
I'm quoting some fellow RCs I asked about this:
Let me know if you have other questions, and I'll forward them.
Good luck
Click to expand...
Click to collapse

amit_aks_007 said:
Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
Click to expand...
Click to collapse
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.

Thanks...will get back to you should I need any further help....
GermainZ said:
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.
Click to expand...
Click to collapse

Some good news
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
amit_aks_007 said:
Thanks...will get back to you should I need any further help....
Click to expand...
Click to collapse

amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse
Mouse? Don't you mean touch?

CWM for Penta IS709C
I meant mouse for sure...touch is working fine....
GermainZ said:
Mouse? Don't you mean touch?
Click to expand...
Click to collapse

Thanks to Fun_
I missed to thank Fun_ for this generic CWM...
amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse

Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C
Hello Everyone,
The 1st Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C is available here: http://forum.xda-developers.com/showthread.php?t=2361857
Please click thanks if I've helped you ever
Enjoy....

Related

[Q] Suli MY-7 / LY-F521 / GT-PAD / DIEL FLICK / SENSE V7

SenseV7 1.2GHZ 1024*600 Resolution 7 in Capacitive Android 2.3
CPU telechips 8803 Cortex A8 1.0GHz (800+300MHz) GPU Mali-200 of 320mhz
OS Android 2.3 Flash 10.1
Memory 512 DDR2 Ram, 4GB Nandflash built in Extend Memory up to 32GB via micro sd card
Screen 7 in Capacitive Hi Resolution 1024*600px 16:9
Audio 2 speakers
3.5MM headphone jack
Super Cirrus audio coding chip
Supported Audio Formats: MP3, WMA, MP2, OGG,AAC,M4A, FLAC, APE,3GP, WAV
Video Support AVI(H.264、DIVX、DIVX、XVID), rm,rmvb, MKV(H.264、DIVX、DIVX、XVID),WMV,MOV,MP4(.H.264、MPEG、DIVX、X
ID),DAT(VCD),VOB(DVD),PMP,MPEG,.MPG,, FLV(H.263,H.264),ASF ,TS, TP,3GP,MPG
Features and highlights
1024*600 Resolution on 7 in Capacitive multitouch screen
Android 2.2
Gsensor
1080p video
Hdmi out
USB port
Micro sd card reader
Dc in
Speaker
Supports USB mouse
Supports USB flash disk
Wi-Fi (802.11b/g/)
Slim body
3.5mm audio jack
USB 2.0
Dimensions
193*115*14.3 mm
Battery
Built in Battery 3000mAH 4-5 hours via wifi
Camera
VGA
http://www.merimobiles.com/SenseV7_1_0_GHz..._p/meri0635.htm
http://www.e-ville.com/lang-en/tablet-comp...diel-flick.html
http://www.suli.com.au/my-7#!__my-7
Anyone else got this tablet? I'm wondering if there's any custom ROMs yet for this device?
I bought one yesterday and I'm waiting to receive it
mir2006 said:
I bought one yesterday and I'm waiting to receive it
Click to expand...
Click to collapse
Great! post your experiences when you get it
root functions with superonclick 1.9.1. It is 2.3.1 on the device.
Hi I bought one ttoday. When arrive I will write the impressions.
hey friends,
i own one too. apparently theres a firmware update to fix battery issue.
http://www.99pad.com/thread-23429-1-1.html
http://www.apadcn.com/post-58.html
but its sooo complicated
It's not complicated, I just wish Google could translate that page better, Merimobiles are providing a firmware update guide this week on their site so it should clear things up. I'm defintalely going to try this newer firmware with the guide.
How is It better? sensev7 or rena3? I bought the sensev7 but I don't know. The screen resolution for sensev7 is better, but doesn't have many other things for exemple bluetooth and microfone
Sent from my HTC HD2 using XDA
great news, rena3 on deal extreme (199.99)
http://www.dealextreme.com/p/7-capacitive-lcd-dual-core-android-2-2-tablet-pc-w-camera-wi-fi-bluetooth-hdmi-4gb-cortex-a9-81345
oh ya , guys , the battery life kinda sux doesnt it ?
quantumfusion said:
oh ya , guys , the battery life kinda sux doesnt it ?
Click to expand...
Click to collapse
I get 3+ hours easily, only thing that sucks is the battery indicator as it doesn't show the correct charge, I guess it's just a firmware issue.
How did you update the firmware btw? Did you manage to update it with the chinese instructions?
refer "How to use FWDN" here
http://forum.xda-developers.com/showpost.php?p=14237828&postcount=2
(don't flash any images in this thread. it's for tcc8902 tablet, not for you)
fun_ said:
refer "How to use FWDN" here
http://forum.xda-developers.com/showpost.php?p=14237828&postcount=2
(don't flash any images in this thread. it's for tcc8902 tablet, not for you)
Click to expand...
Click to collapse
ok I got it, thanks, will try it tonight!
Is there something special how to reboot this tablet to FWDN mode? Or do you do it from the FWDN software?
phiit said:
ok I got it, thanks, will try it tonight!
Is there something special how to reboot this tablet to FWDN mode? Or do you do it from the FWDN software?
Click to expand...
Click to collapse
try power off -> hold back & power on.
for reference, on EM71, home + power is FWDN and menu + power is fastboot and back + power is recovery. adb reboot bootloader goes fastboot mode.
fun_ said:
try power off -> hold back & power on.
for reference, on EM71, home + power is FWDN and menu + power is fastboot and back + power is recovery. adb reboot bootloader goes fastboot mode.
Click to expand...
Click to collapse
Will try those, thanks
DO NOT USE FWTOOL TO INSTALL RECOVERY!
TOUCHSCREEN WILL BE DEAD!!!
if you can flash 2.3.3 ROM for LY-F521 posted on 99pad, please try clockworkmod
http://androtab.info/files/tcc8803/cm7/20110615/LY-F521-8K/
I think LY-F521-8K-recovery-signed.zip can be installed from stock recovery.
I don't have LY-F521, so I can't test it. please use with care.
if it doesn't work, please reflash 2.3.3 ROM.
don't use this file on non-2.3.3 ROM or on other tablets. it may brick your tablet!
fun_ said:
if you can flash 2.3.3 ROM for LY-F521, please try clockworkmod
http://androtab.info/files/tcc8803/cm7/20110615/LY-F521-8K/
I think LY-F521-8K-recovery-signed.zip can be installed from stock recovery.
I don't have LY-F521, so I can't test it. please use with care.
if it doesn't work, please reflash 2.3.3 ROM.
don't use this file on other tablets. it may brick your tablet!
Click to expand...
Click to collapse
Any more info on this CM7 ROM? Getting stable complete CM7 for this tablet would be early christmas!! Is it beta or alpha or ?
phiit said:
Any more info on this CM7 ROM? Getting stable complete CM7 for this tablet would be early christmas!! Is it beta or alpha or ?
Click to expand...
Click to collapse
sorry, no "stable" "complete" release are exist. I don't have LY-F521 nor another tcc8803 tablet, I don't know what work and what not work on LY-F521. if you want to know how good, please test and tell me result
by the way, CM7 is just for my fun. I like dev work and I don't care result. I think almost same level on tcc8902. refer following thread
http://forum.xda-developers.com/showthread.php?t=1101094
if someone test CM7 for LY-F521 and basic function works, I'll add LY-F521 for my target. but don't expect progess, it's my spare time project.
I'll give it a try in a day or two when I have more time to play with this thing. If one day there's working CM7 for LY-F521 I'd be glad to help you out
phiit said:
I'll give it a try in a day or two when I have more time to play with this thing. If one day there's working CM7 for LY-F521 I'd be glad to help you out
Click to expand...
Click to collapse
thanks. but please use with care. I can't promise my files doesn't brick your tablet...
if 99pad 2.3.3 ROM works fine on your tablet, my clockworkmod and cyanogenmod will work...I hope so

MT6575 CM9 or 10 ROMS

Hi Everyone!
I want to know if there are CM roms for Chinese smatrphones with the MT6575 processor.
Thanks
Unfortunately there are no kernel sources from Mediatek so there are no Custom ROM like CM, the only way to make a ROM is to add some code to the kernel with reverse engineering and this isn't so good, because there are no ways to port MIUI or similar ROMs :'(
I'm working for some mods on Zopo models like ZP100, ZP200, ZP300, ZP400, ZP900, ZP400+ and ZP300+ but nothing over ROOT, CWM and BusyBox
Thanks AresSieran
You can find many firmware for MT6575 on russian forum *ttp://forum.china-iphone.ru/viewforum.php?f=46
ZP300+
Hello,
Would you know by any chance how to remove Phone storage (internal SD card) of the ZP300+ and liberate that memory for Internal storage ?
I want a stock ROM / Recovery image for MT65XX (BP-I9300)
I want a stock ROM / Recovery image for MT65XX (BP-I9300) as I accidently deleted(Flashed) my Recovery image of my BP-I9300(MT65XX) . Where can I get it?
Details:
Bephone I9300 model niya, Also known as the galaxy S3 clone,
android OS version 4.0.3
Baseband version : MAUI.11AMD.W11.50.SP.V28 2012:09:05 17:06
Kernel Version : 0502D006_20120921
Build Number : ALPS.GB2.MP.V2.18
Yogesh1969 said:
I want a stock ROM / Recovery image for MT65XX (BP-I9300) as I accidently deleted(Flashed) my Recovery image of my BP-I9300(MT65XX) . Where can I get it?
Details:
Bephone I9300 model niya, Also known as the galaxy S3 clone,
android OS version 4.0.3
Baseband version : MAUI.11AMD.W11.50.SP.V28 2012:09:05 17:06
Kernel Version : 0502D006_20121017??{not sure}
Build Number : ALPS.GB2.MP.V2.18
Click to expand...
Click to collapse
Have you tried the cwm recovery?
http://forum.xda-developers.com/showthread.php?t=1921178
help pls
AresSieran said:
Unfortunately there are no kernel sources from Mediatek so there are no Custom ROM like CM, the only way to make a ROM is to add some code to the kernel with reverse engineering and this isn't so good, because there are no ways to port MIUI or similar ROMs :'(
I'm working for some mods on Zopo models like ZP100, ZP200, ZP300, ZP400, ZP900, ZP400+ and ZP300+ but nothing over ROOT, CWM and BusyBox
Click to expand...
Click to collapse
hi buddy i got a ZP 300+ with me now how do you root it and more than that did you find any Custom ROM for Mediatek ??
amyren said:
Have you tried the cwm recovery?
http://forum.xda-developers.com/showthread.php?t=1921178
Click to expand...
Click to collapse
Yes,I have tried. I have the recovery in place..Only problem is,that I can't find any custom rom. for it
Yogesh1969 said:
Yes,I have tried. I have the recovery in place..Only problem is,that I can't find any custom rom. for it
Click to expand...
Click to collapse
There are a few custom roms available in that same thread where the cwm recovery was, you could try some of those.
I'm using the 4.1.9 rom found in that thread.
Also there are a couple of Lewa bases roms for MKTK6575 phones you can try.
I dont have the link right here, but google Lewa mtk6575 and I think you will find something.
But first, is your phone working now or not?
If your phone is working, do make a full backup of the firmware before trying to flash any custom rom.
If the phone isnt working, then it cant be much worse, so then you can try any custom rom without risking anything.
Hi I have a 7" tablet with mtk 6575 dual sim cards, do you know where can I find a custom rom for it, it is similar to freelanders pd something with 3g moudles, bluetooth and gps built in any help will be appreciated...thanks.
Also before flashing the tablet, how can I make a full backup of my actual rom.
gusduenas said:
Hi I have a 7" tablet with mtk 6575 dual sim cards, do you know where can I find a custom rom for it, it is similar to freelanders pd something with 3g moudles, bluetooth and gps built in any help will be appreciated...thanks.
Also before flashing the tablet, how can I make a full backup of my actual rom.
Click to expand...
Click to collapse
There is a tuto here in xda (use search engine) of using MtkDroidTools for backup and SP Flash Tool for flashing (sorry, I lost links)
Kernel source
If anyone is looking for a source for mediatek boards, Alcatel has released its sources. Alcatel phones are made by mediatek. I'm currently attempting to port CM to my S'pop which runs in MT6575 board but I'm not yet done syncing repos from CM. If you anyone is intersted, their sources can be found here.
http://sourceforge.net/projects/alcatel/files/
cyberangel22k said:
If anyone is looking for a source for mediatek boards, Alcatel has released its sources. Alcatel phones are made by mediatek. I'm currently attempting to port CM to my S'pop which runs in MT6575 board but I'm not yet done syncing repos from CM. If you anyone is intersted, their sources can be found here.
http://sourceforge.net/projects/alcatel/files/
Click to expand...
Click to collapse
If u build ur CM then inform in this thread also nd if its possible then make a universal build for all mt6575 like others
Sent from my A2 using xda app-developers app
Reply
stephm69 said:
Hello,
Would you know by any chance how to remove Phone storage (internal SD card) of the ZP300+ and liberate that memory for Internal storage ?
Click to expand...
Click to collapse
Go to system/etc
open vold.fstab and replace the Sdcard mounting
(make a backup)
vidocon a15
qmobilea2 said:
If u build ur CM then inform in this thread also nd if its possible then make a universal build for all mt6575 like others
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
Sir ,
I hav vidocon a15 based on mt6575..can i use this rom to my mobile? if not please develop a rom for my mobile.
Videocon a15
qmobilea2 said:
If u build ur CM then inform in this thread also nd if its possible then make a universal build for all mt6575 like others
Sent from my A2 using xda app-developers app
Click to expand...
Click to collapse
Sir,
I hav videocon a15 mobile.can i use this rom for my mobile .if not can u make universal build or exact rom for my mobile...pls
piratebaysri said:
Sir,
I hav videocon a15 mobile.can i use this rom for my mobile .if not can u make universal build or exact rom for my mobile...pls
Click to expand...
Click to collapse
well there is not any universal rom in android which can work on any phone & secondly i dun hv info about ur phone nor i hv it so i can't make a same looking rom for ur device but post a thread at android general forum for requesting a custom rom with info about ur phone i.e., brand name, processor etc nd upload ur stock rom backup!
amyren said:
Have you tried the cwm recovery?
http://forum.xda-developers.com/showthread.php?t=1921178
Click to expand...
Click to collapse
Yes , I tried and it works. The thing is I'm not finding the working custom rom for it.which can be installed via recovery.
Yogesh1969 said:
Yes , I tried and it works. The thing is I'm not finding the working custom rom for it.which can be installed via recovery.
Click to expand...
Click to collapse
Did you post this by mistake?
You did post the exact same message almost one year ago on page one of this thread. And I did give you a reply as well then.
If you still have the problem, and havent found any working firmware after looking for one year, then I fear you will not find it at all.
But you could always try. Since you already have the cwm on the phone, you could try any rom available for flashing with the cwm, and hope that one will work.
I did learn that these clones can be different even if they are labeled tha same. So one rom for eg. MTK6575 GT-I9300 may fail on a similar looking phone labeled MTK6575 GT-I9300. This happened to me when I tried to flash my wife's phone with my rom. The phones looked the same and was baught from the same dealer at the same time at a marked. So I asumed the hardware was the same. I had a lot of work getting the phone to work again.

[Q&A] RK3066 Tab Genio by Oma rocks !

Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.

Any CWM/TWRP porting tool for MT6580 but 5.1/Lollipop?

Even the auto-search after entering thread title returned only threads with 0 replies...
So i have some no-brand chinese MT6580 running Lollipop 5.1 - not KitKat.
All the automatic and semi-automatic recovery porting tools work only for GB/JB/KK
Sadly the MT6580 kernel source was never leaked, so no compiling also.
Any way to get anything working? i would be even happy with a non-Touch CR...
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
TWRP for MT 6580 w/ lollipop 5.1
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
DISCLAIMER: As everyone says, use at your own risk. If the aliens come and take away your house pets or you experience any other device related or coincidental calamity of any kind, there's nothing I can, should, or will do about it.
Used the Carliv Image Kitchen, my stock recovery image, a TWRP image I found for an Infinix "Hot 2" and the general procedure found at this URL
http://www.xposedgeek.net/how-to-port-philzctrcwmtwrp-recovery-to-your-phone/
If you have the flash stuff for your factory build like I did it is probably a piece of cake, because I am pretty new at this sort of thing and if it can be screwed up I usually can find the way to do so. Took about an hour including thinking time before hitting the button. I was either brave or stupid and didn't even set up a virtual test first, but it works :cyclops: The Almighty must approve of my actions at some level.
Proceed with appropriate caution.
Hope that helps.
nezlek said:
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
Hope that helps.
Click to expand...
Click to collapse
The lack of OTG support is indeed something of a shame, but at least this is something. Thanks for the tip mate!
EDIT: OK, so I managed to port TWRP to my device. Only problem is that I had to fiddle with the partitions, and for some reason there seems to be no other way to flip the screen back other than compiling another TWRP image or google my way through a compatible prebuilt by some kid online. I'll post my flipped-screen version ASAP when I get to compile that thing myself.
Sorry for the double-post, but here's the source-built port I made for inverted framebuffers:
https://github.com/huckleberrypie/android_device_alps_z6u030
I made it for clone devices in mind, but feel free to port or fork this in case you need to use this on your phone.
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
Sir please port samsung c7 clone

Really messed up tablet

I acquired a china tablet running lollipop 5.1.1 arm64v8
The board is al-mt81xx-86v1 with a cpu 8163
Kernel version 3.10.72 [email protected] #6
Build number HY U804MC_20190517_V1.1.00
Custome build version ALPS.L1.MP8.V_ALONG8163.E_p9
Recovery doen't work, just shows a sideways Android with no choices.
I would love a recovery that works and possibile the stock rom.
I can use my puter and get to adb root.
and the bootloader is already unlocked.
Any help would be really appreciated.
-Twilitht Time-
Do you know which commercial Alps tablet is the direct ancestor of your custom U804MC? Maybe if you found the firmware for that, you could fix this.
Thanks for replying
Seekernerd said:
Do you know which commercial Alps tablet is the direct ancestor of your custom U804MC? Maybe if you found the firmware for that, you could fix this.
Click to expand...
Click to collapse
I finally got TWRP ported into the recovery, its upside down on the screen ( ie. you swipe the top when the image is on the bottom )but its at least working
I really want to thank you for replying, Staysafe and COVID free.
Do you think maybe you ported a TWRP for MT8127 into your MT8163? Could be incompatible?
Seekernerd said:
Do you think maybe you ported a TWRP for MT8127 into your MT8163? Could be incompatible?
Click to expand...
Click to collapse
To port TWRP you need the same processor and kernel version for donor and stock....It is the fastest way to port I think

Categories

Resources