Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Related
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
xgeek.cub said:
Hello;
i search up and down and i dont find any official rom for JXD S9100. here is 2 isusses
a. if there's any other rom to flash the device with.which rom is better and which one is rooted or could be rooted .
b. this device is not going to rom recovery mode.with volume up and power or volume down or even power with back buttom.so how could i flash it with supposed rom.
Click to expand...
Click to collapse
Check the link in my signature
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
xgeek.cub said:
Thanks but there are two issues:
Is anyone wrote especial time for this device. If not how could I write my own rom. Preferably the 4.0.4.
The second one is the version of android that Mapan has. What is the android version on that rom.
And also is an English version of livesuite pack. I have one but it is chinese.
Really thanks for your answer.
(^ム^)
Click to expand...
Click to collapse
Livesuite-- The one in the link on my guide is in English.
Also the version on the Mapan site is 4.0.4
You could check over at TechKnowForum. There is quite a bit of info there about these generic tabs...
more info
restlessrob you are a life saver.
but I would be happy to have a link that you directed me to.
and what is the mapan CPU overclock ratio? 1.2 or 1.GHZ
but important stuff
could I change the cpu rate after installation of rom?
I heard I have to use something called LCD density moder. what is it where could I get it
and what is the values for my tablet to set within?
is it possible to change the internal device memory with trade?
P's: i found a ciyogen mode for alllwinner a10 what is it? is it a firmware like mapan!? ♡(^ム^)♥
I never got that far. I got the kindle and so gave the tablet to my mum. I believe it to be 1.0 I am not sure.
Sent from my KFTT using Tapatalk 2
info
Hello there,
Thanks for you your kindness.
I did flash with both rom.
Both are great mapan has some power in it. Nice governer battery. Also nice kernel defenetly no shen. More speed in it. And more organized defenetly great backbone.
And freelander sweet as a honey and smooth as a butter. Very very nice reselution. Indeed nice battery usage. Nice fonts and so much speed and agility. Defenetly compatible with EA and Gameloft games. Top speed. Thought nothing to be picky about it comes with five chinese app which are are in dalvick and can not be removed but you can freeze the sweet by titqnum backup.
I HOPE HERBY THAT FREELANDER HEARS ME AND CONTINUES TO BUILD FIRMWARE FOR FREELANDER PD60.
Please someone tell them.:silly:
Ps: mapan doesn't have any chinese or additional app.
Do you know if any other firmware matches our device?
Hello again
Ps
Mapan is clocked at 1and freelander at 1.2 but you can easy could root the newly flash device install a cpu overclocking app and change the frequency but don't go over 1.2¡¡¡¡¡¡¡
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Hello my dear friend
It is a common mistake which I did it it the last time.
You should only use what is provided by the rom company you choose.
Ie. If you want to flash the pd60 rom use the very only livesuit which they provide .
and in their livesuite, you can find the usb driver.
after you flashed, For usb debuging mode driver go to folder named usb-driver out side the livesuite not in it.
It is worth to note you could use usb driver inside the livesuite of mapan mx913 for flashing time. Only for flash not the usb debugging driver which mapan provided.
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet
link
egguibs said:
hi guys i have de freelander pd60 but i got some issues with the freelander rom on pandawill
livesuit didn't reckognise it so i can"t install it where did you find your firmwares ??
can you give me a link ?
Click to expand...
Click to collapse
PHP:
http://www.pandawillforum.com/soft/PD60%20smart%20120801%281%29.rar
http://pan.baidu.com/share/link?shareid=191236&uk=2351629104
both are the same.
i think you have the issue with the driver. i that case you should use the drivers come with th MAPAN MX 913 in here:
PHP:
http://index.maixin-china.com/download/software/MX710A%20Update%20Tool%202012.rar
http://index.maixin-china.com/download/software/MaPan_MX913_Firmware_201212.rar
Sorry the second batch of link is wrong. i mean they are rom
the link is
PHP:
http://index.maixin-china.com/download/software/win7_UsbDriver_For_MaPan.rar
TABLET OFF VOL- then CONNECT THE TABLET TO PC then install the DRIVER
TABLET OFF, VOL+ then CONNECT THE TABLET TO THE PC to make Livesuit find the tablet (if you do it right the live suit start to flash by itself just don't forge to say yes to format the internal disc). :beer:
Hello Everyone,
I have a Penta IS709C tablet with specifications as follows:
Operating System Android 4.0.4
SOC Rockchip RK2906 (Basically a RK2918 SOC without HDMI Output)
Processor Cortex A8 1.0 GHz
GPU Vivante GC800 Graphics Engine
RAM 512MB (~323MB Available)
Internal Memory 4GB (~2.04GB Available)
External Memory Expandable up to 32 GB with a TF (Micro SD) Card
Display Type LCD
Display Size 7 Inch
Touch Type Multi-touch Capacitive
Sensors
Accelerometer (MMA8452Q – Present and Active/Enabled),
Light Sensor (AL3006 – Present but Inactive/Disabled),
Magnetic Field Sensor (AK8975 – Present but Inactive/Disabled),
Orientation Sensor (AL3006 – Present but Inactive/Disabled)
Proximity Sensor (AL3006 – Present but Inactive/Disabled)
Camera 0.3 MP
Speakers Stereo Speakers
Battery Capacity 3000 mAh
USB Port Mini USB (On-the-Go)
Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n
Connectivity Supports 2G and 3G USB Dongles (GSM and CDMA)
I have rooted it and am looking for a good custom ROM (Jelly Bean preferred) for it (one which can enable all disabled kernels and more importantly the kernel which supports RAM swapping. Can some one help me get one?. I also have the firmware (update.img) for it and am ready to share it with someone, who is willing to create a custom ROM out of it.
Thanks for all your help....
Have I posted on the wrong place? Or is it so that there is no one kind enough to help me? It has been more than 24 hours, but I have not had any responses.
Please help....
Sent from my Full AOSP on Rk29sdk using xda app-developers app
Hey,
I'm quoting some fellow RCs I asked about this:
Oh a Rockchip tablet?
Oma's ROMs for the RK2918 should be able to help
Click to expand...
Click to collapse
I used to own a couple different rockchip tablets, only place I know of developers working on those is freaktab.com have him talk to finlessbob who knows the ins and outs of these.
Or here on xda have him search for the nextbook premium 7, there are a couple devs who worked on that tab here and made a few custom ROMs, I and a few others tried to get cwm on it and failed but the way you flash those things it isn't needed for custom ROMs kernels etc, its all done with the flash tool.
Click to expand...
Click to collapse
Let me know if you have other questions, and I'll forward them.
Good luck
Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
GermainZ said:
Hey,
I'm quoting some fellow RCs I asked about this:
Let me know if you have other questions, and I'll forward them.
Good luck
Click to expand...
Click to collapse
amit_aks_007 said:
Hi Germainz,
Thanks for the reply....
I tried Oma's ROM and my tab was unable to move any further to first screen during boot. I also searched a lot for other custom ROMs but could not find one which is the reason I decided to prepare my own custom ROM with at CWM recovery. For this I extracted recovery,img from updated.img (obtained from vendor) and uploaded it to builded.clockworkmod.com.
The question now is: Is this the correct way of obtaining stock recovery image for upload to builded.clockworkmod.com or should the recovery.img only come from device?
Thanks for you help...
Regards,
Amit Srivastava
Click to expand...
Click to collapse
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.
Thanks...will get back to you should I need any further help....
GermainZ said:
That is the correct recovery, but even if you get it to build, you may have a tough time getting to work on your tab. With the other rockchip tabs a fellow RC used, no one could get it working. Again, a recovery may be nice but it's not needed for what you's looking for.
Also, even though these may all be similar tablets, flashing custom ROMs from one to another most certainly won't work, so try to port the ROM you wants to your tab using your vendor's ROM as a base then flashing it with the flash tool.
There are some useful tutorials on xda about porting ROMs, too. Good luck again.
Click to expand...
Click to collapse
Some good news
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
amit_aks_007 said:
Thanks...will get back to you should I need any further help....
Click to expand...
Click to collapse
amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse
Mouse? Don't you mean touch?
CWM for Penta IS709C
I meant mouse for sure...touch is working fine....
GermainZ said:
Mouse? Don't you mean touch?
Click to expand...
Click to collapse
Thanks to Fun_
I missed to thank Fun_ for this generic CWM...
amit_aks_007 said:
Hi Germainz,
Finally, I have a working CWM recovery on my device now, it is a generic one and has been obtained from androtab.info/clockworkmod/rockchip/rk2918/. The only issue now is I am unable to use mouse with it and am looking for ways to resolve it.
Thanks,
Amit
Click to expand...
Click to collapse
Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C
Hello Everyone,
The 1st Custom/ Unofficial Jelly Bean 4.2.2 ROM for Penta IS709C is available here: http://forum.xda-developers.com/showthread.php?t=2361857
Please click thanks if I've helped you ever
Enjoy....
Q&A for [ROM][Linux/XBMC] Native Linux for Amlogic based Tv-Box's {08/24/2014}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
addons dont work
So, i'm sorry if my question was solved in last pages....
Install...done
XBMC works smooth
But i cannot install any addons, or skins or anything...
How i can solve this?
Thanks very much!
MX Linux on G18REF with build 6/5/14
I just received my generic "MX" box which is a G18REF and currently has build JDQ39.20140605. Kernel version is 3.0.50. I would like to install MX Linux on this box and am wondering if I needed to a firmware 1.1.5 downgrade first as I saw mentioned elseware. How can I confirm this? Thanks!
remote
Hi all,
great work, I have a vcom dv141d box I have tried the mxlinux and the openelec and I have the same issue, as soon as the image is applied the remote stops working, I can use a usb remote but the IR won't work, as anyone got any ideas how to get this to work again ?
Thanks for the great work
---------- Post added at 09:44 AM ---------- Previous post was at 09:26 AM ----------
Hi,
Thanks for the great work, I have tried the mxlinux image, when I convert using the stvmx conversion, my remote stops working I have a vcom dv141d box that's a g02 ref, everything works fine but I have to use a usb keyboard its like the IR as been killed, does anyone know how to solve this
Thanks
Jynxbox M1V2 Pure Linux
Hello everybody,
is it possible to flash this rom to the box mentioned on the title?
Thank you very much for your time and answer
G02 kernel source and config
Hi,
Thanks for these ROMs - working great on my ATV1220 (G02).
Please could you point me at the source code and config used for the kernel build? I see some kernel repos at https://github.com/CoreTech-Development but none that seem new enough given that the release changelog suggests that a kernel from March 2014 is being used.
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
@perro69
i was reading another thread and found that an openelec M8 image has been released :
http://forum.xda-developers.com/showpost.php?p=56366456&postcount=211
G02REF
I beleive on page 72 of MX-Linuxs thread it stated that gotham-beta2 was a working broadcom version on a droidstick a2
now yes i can get rc1 to work no problem but with no connection it was useless last year.
Excited reading about Vitaly_S work i flashed an old A2 stick laying around with BETA 2 (didnt work) and the next comment as an updated build MX_LINUX-G02REFDONGLE_170514.....
I apprecite everyone and anyones work over the past year roughly as i was watching this thread from the beginning
IE.. croniccorey and vitaly_S
just wanted to share that after upgrading screen goes black then after restarting stick its a greenish yellow.
so the AM6086A ------ A2 stick is not complient with this release
Thanks guys, any ideas otherwise please let me know.
Please help me
I got this box http://www.ebay.com/itm/201132479393?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT I think its a cheap mx 2 android tv box
and ive been trying to get xbmc to work on it with no luck, i flashed it with xbmc linux, I followed these steps - http://forum.xda-developers.com/showthread.php?t=2418029 and it worked without wifi but when i turnd the box off for the first time it wouldnt come back on so i sent it back for a replacement one. my new one should be here soon and the only thing i care about is xbmc. the problem i have with xbmc on android software it comes with is it works fine till i turn it off and back on then it only loads like 1min of my movies and its like wifi quits working or something, please help so i dont ruin another box. any help would be appreciated
Thanks
reefmonger said:
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
I just reread all 107 pages again to see if I missed something. Has anyone had success with these roms on Bluetimes mx5 g02ref meson6 ?
Sent from my SGH-I747M using Tapatalk 2
imx6 box
Hi, bought a mx clone from aliexpress want to upgrade the firmware, can I use matricon updates?
toothpick doesn't work
How to Restore your Recovery when toothpick doesn't work for mx android box?
MXQ S85
Hi
I bought this box from Gearbest. Its the MXQ S85 Amlogic S805 Quad-Core Multimedia Android 4.4.2 TV Box
I am looking to load Linux on it for XBMC, any recommendations out there for versions available that will work? Thanks
Mygica atv1200 rebooting over and over
I tried to install the mx Linux build for atv1200 posted in the forum here. it said to run the conversion file first then flash the latest release for geniatech/mygica atv1200. I made the sdcard up following the instructions in the readme file included. when I popped the sdcard in and did the upgrade process, it booted to a screen with the Linux penguin, and a yellow progress bar. I seemed to finish then reboot. but it has been doing that same process over and over for the last hour, and it seems not to be working. I tried to revert back to android but it would not boot. I tried making bootable sdcard with geniatech uboot bin, and mygica rom, but it woin't boot. then I made the sdcard with the mx Linux conversion files again, and it boots, but just keeps rebooting with the penguin screen and the progress bar. any help would be greatly appreciated. seems like there are not a lot of people having the same problem cause I cannot find a solution anywhere.
mx2update.zip for v1.1.5 is corrupted
mx2update.zip for v1.1.5 is corrupted
I can open all the other version mx2update.zip, like 1.1.6, but not for 1.1.5.
---------- Post added at 06:57 PM ---------- Previous post was at 06:50 PM ----------
Hi,
How to un-brick this box.
G-Box Midnight rev 2.2, 4GB Storage, 1GB RAM, A9 Neon CPU.
was running "Linux inside, XBMC 12.2" tried to update to android firmware 1.2.2.
now only getting black screen. The blue light comes on, but none of the firmware i put on my 1GB SD card get me any display. I try holding the toothpick for about 2 mins, but no sign that it is working.
Can't get into recovery, even if i am there no way to be sure.
Can someone help me?
Thanks.
Amlogic M3
I managed to flash an early xios linux "the hydra" xbmc onto my amlogic droid stick but the wifi is completely gone which makes it hard to do anything. For some reason my unit doesn't have a bootloader, nor a reset button (so i'm doing the advancedlauncher -> sh -> reboot recovery way in xbmc) and there doesn't seem to be any other recovery roms available for it.
Figured i'd try the M3 linux from here, but apparently this is configured to assert a getprop for specific hardware. I can change that myself, but when i sign the zip my unit refuses to go past that verification. With this rom the signing verification is fine, but assertion fails. I can fix that myself but how did you go about and sign the zip? I've tried a few different ways (apksigner, jarsigner) to no avail. There is very little information on what recovery (3e) actually checks, any clues on how to resolve that? (All it says is signature verification failed when i sign, with test keys and self made other keys).
Best
Crypth
Which firmware for generic G18REF
Hi I purchased a generic MX2 G18REF,
Which firmware should I install Matricon 1.1.5 or 1.1.6 before installing Linux MX?
Thanks
Cheap DX M3 stick won't work.
I just flashed the M3 (f16ref) based one on my cheap Amlogic AML8726-M3 stick (1gb ram, 4gb nand, 1.5Ghz), this didn't quite work out and it seems i can't flash other stuff on it either now. Just want to warn anyone else trying this
Codesnake help needed
I have a square s802 M8. I recently tried several different OpenELEC zips, most zips received NO FOOTER errors and would not install but most of the ones that did install, did not have any access to wireless networks under OpenELEC settings. Including Codesnakes ROMs. They would not allow access to wireless networks. So, I finally came across a Russian zip on xbmc.ru that installed and it is the latest developer zip found at: OpenELEC-Amlogic.S82.arm-devel-20150113183017-r20272-g0481f0c.zip. After zipping it to the s802, I realized it is for the S82. It still worked but it seems to have some bugginess. It is getting stuck on the opening stream window and the working spinning wheel is getting stuck too often. I am used to Stane's MX Linux and got spoiled with speed. Please help, I need a network working .zip with audio/video synced properly and speed. Any suggestions on a more suitable ROM zip? All of codesnake's OpenELEC ROMs seem to not have wireless networks enabled. Is there a way to have ethernet hooked up after installing codesnake's zip and then get wireless by downloading a network setting addon or enabling an OpenELEC setting feature??
Q&A for RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Alcatel T10 Upgrade
tinko975 said:
finally, i did my alcatel t10 working right..
flashed it with Oma_Odys_Loox_JB_CM10_4.1.2_v1.2, used Oma_CM10_intSD_to_NAND_OTG_fix and Oma_CM10_v1.2_Format_NAND with JK-CM10-Pascal2-oc1104_20121203 kernel. no bugs, no rotations and cpu oc 1.1 ghz..
tnx, but we want cm11..
Click to expand...
Click to collapse
Hi!
I saw your post regarding your alcatel t10 being upgraded to jellybean..
can you please guide me on how to do it and what are the items that i need to install..
Thanks!
i forgot it, sorry.. now is stock rom on that device..
Hi Oma,
Can you please help me determine what are the things that I need to download in order for me to upgrade my Alcatel T10.
I've been reading threads about upgrading its firmware to Jellybean but it came to a point that I got confused and really don't know what are the stuffs that I need in order to upgrade my tab to jellybean.
I am new to this kind of stuff and I will appreciate if you can also provide me the step by step guide on how to upgrade may to tab to jellybean..
Thanks in advance!
If you never did this there are very big possibility that will btick device.. I tried several roms but return to stock debloated and rooted.
Problems with generic RK2918 ICS tablet
Hi all!!
I'm new to this forum (and pretty much to Android scene in general), so please, be lenient with me in case I unadvertedly infringe any forum norm. The matter is, I've been looking for some info about a generic RK2918 tablet I bought about 2 years ago, to no avail. As of late, the device is acting strangely (random reboots and/or stuttering running apps that it managed effortlessly a couple months ago...). I'd like to know how to flash it, as well as which rom I should install in order to make my tablet reach its maximum potential. I've heard great things about Oma's CM 10.1 AOSP roms, but I don't know which one would suit my device best.
My device's specs go as follows:
The tablet is a IMD "|97D", a 9.7" inch, 4:3 aspect ratio screen running under Android ICS 4.03
RK 2918 CPU at 1.2 GHz
1 GB DDR3 memory
16 GB NandFlash
max 32GB microSD support
WIFI 802.11 b/g/n support
G-Sensor
dual micro USB, one of them OTG
10 point capacitive screen with IPS 1024 * 768 resolution
2MP front and back cameras
The device is currenly running under its default firmware (i.e. no root access). Any help and/or piece of advice on how to proceed would be extremely welcome. Thanks in advance!!
Sir Oma,
I flashed this rom to my Alcatel One Touch T10, CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 with stock kernel 308 Alcatel T10 and
applied CrewRKTablets_AOSP_4.2.2_Format_NAND_fix. It is pretty stable however the battery status monitoring is not working. I have also
tried the other kernels said to be compatible with T10 notably the Pascal2 kernels. They seemed to work Ok but the screen display was
off-center, display was leaning to the right side of the screen. Same result when using the other stock kernel 308 Alcatel T10_2.
My only concern is the battery status monitoring, it remains stationary all through the whole hours of tablet use. Charging detection
is also not working. The rom however can detect the current battery status only when rebooting. I did try to apply the akku fixes for
JB and CM10, (though not intended for the AOSP rom) none worked. It ended up in bootloops.
Can you suggest a battery fix intended for CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 rom? Of all the JB 4.2.2 offering found
at CrewRKTablets site, this rom proved to be useful and stable to my Alcatel One Touch T10 tablet. There are some minor function
issues like display resize "fit to standard screen" option, it does not work. Camera image is upside down. But I guess to a standard
user (like me) these function should not pose a serious problem as installing and running apps intended for JB 4.2.2 works smoothly.
Thank You and More Power!
@ tinko75, tried the BQ-pascal kernels too but to no good.
Hello,
I´ve got the neo X7 and because my sis and i want to use it and i have heard that you can choose between two accounts at this ROM i want to installt it.
I have the s4mini with CyanogenMod 12 but about that i´m clear but with the Neo X7 i have no Idea how that works... so can anyone explain me how to install it (maybe a step for step Instruction)
The Tablet is in a originally condition (there is no CWM or anything else. So i need all...
Thanks in advance
and I´m sry for my bad Englisch but i´m from Germany and just at school.
greetings by Kainze
Arnova 10b g3
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
---------- Post added at 11:38 AM ---------- Previous post was at 11:13 AM ----------
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
i've also some issues with the TouchScreen... it seems to be not well calibrated, i've to touch the screen just under the spot i want to...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
Bricked Pmp5097
After flashing my PMP5097 cm10 I got bricked device. At startup tablet defined as "unknow device", but the screen is black
Help, please
Sorry for my english
Hello forum, please excused my poor english.
A few month ago i was writing a text message when my phone screen doesn't work some parts of the left side (in that moment i was using cm11 android 4.4.4, recovery bigpart). So in that moment i do not care, i was using it with the keyboard horizontal. But with the passage of time the bluetooth, font camera and wifi doesn't work correctly.
I think it was a rom trouble, so i reset my phone, but it doesn't work. I reinstall the rom, doesn't work too. Even i installed the mokee rom (android 5.0.2).
Before cm11 i used cm7, cm9 4.0.4, cm10 cm10.1 (android 4.1.1, 4.1.2, 4.2.2, 4.3) and the phone work correctly (except some bugs ). So i reinstalled every of that's roms... the same problem.
I followed the instructions in this article https :// phenobarbital.wordpress.com/2014/08/22/motorola-android-rescatando-al-soldado-atrix-4g . Doen't work too
Searching in youtube i saw a lot of people with the same problem and one of the user comment that it should be the kernel, so i flash every kernel for atrix mb860 that i found in the internet... guess what, nothing.
I'm actually using a miui rom android 4.2.2., it work AMAZING and do not reheat instead from cm7 to cm11 and mokee rom, but i have the same trouble jaja.
with this rom and cm10.1, cm11 and mokee the kernel is the same 3.1.10, i think perhaps this is the cause, but when i try to flash another rom i loss android, then i have to reinstall it (now i know why).
I'm searching for a different kernel that work in android 4.2.2 up.
I'm sorry if i bored you and excused my poor english again if anyone can helpme i being really really grateful, i love that cell phone.
Forza Motorola Atrix 4g mb860 <3
I share a srennshot that show what is the part of sreen that do not work, it is just the space between the vertical lines, ignore the horizontal lines mega : /// #!5IgjmIRI!OFwb0qz2XHv3GvkkZCQiB5NRyL6PceMbfGmxXKLa6qc .
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
I don't understand. In the left side of the touch doesn't work. I try with a rom named darksideblur etc i think it is 2.3, but it's the same. When i using a recovery touch the left side work, that's the reason beacause i think that may be it is a kernel trouble.
I should try with a 2.3 stock rom.
And you should try with a miui rom jaja
lokr said:
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
Click to expand...
Click to collapse
Do you have the link of your rom and parches? Or may be i can fix mine?
pendejete said:
Do you have the link of your rom and parches? Or may be i can fix mine?
Click to expand...
Click to collapse
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
lokr said:
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
Click to expand...
Click to collapse
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
pendejete said:
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
Click to expand...
Click to collapse
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
pendejete said:
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
Click to expand...
Click to collapse
Interesting, the same problem occurred at my screen too, and precisely in this section (like it is on your screen) screen not work,
when I move a finger across that part of the screen, cursor skips that part.
Have you solved the problem, and how?
Motorola Atrix 4g, 4.4.4 KitKat