I recently bought an unlocked Atrix 4g off ebay to use on my tmobile plan. Everything went smooth except that I'm having issues with slow internet. I've looked all over for a solution(youtube, google, xda forums, etc.) All I've been able to come up with was that until late 2012 this phone wasn't even able to connect to tmobile except on 2g, and a bunch of useless(to me) instructions on how to change my APN.
At this point the phone tells me I'm on 3g, and I consistently have 3-5 bars. My old sidekick had 4g in 90% of the area and 3g everywhere else, so I know for a fact that there is coverage. However when I do a speed test I get an average of 25-50Kbps download and upload, occasionally I get 170Kbps. I've called tmobile and verified that there is EDGE network support in my area(apparently also HSPDA but no HSPA+). I just installed GSM Singal Monitoring app from the play store which is also telling me I'm on EDGE network type.
I've tried every combination of APN settings I can find on the internet including cingular settings and have come up with nothing. This data transfer rates don't drop, and don't get better. Does anyone have any suggestions? I'm sure it's not the phone, I can get 18Mbps at work on the wifi(running tests, downloads I've seen up to 4MB/s or 32Mbps). Also if there's anything I need to do on the phone to get internet speeds which requires root, I've already rooted the phone. The only thing I've installed since the root is CWM.
I have used both the Atrix 4G and Atrix HD on T-Mobile. The 4G does not have the radio frequencies needed for 4G / LTE data service from T-Mobile, but the HD does. In fact the HD is a perfect match for T-Mobile frequencies. You can check out the detailed specs for these phones on GSMARENA.
Sent from my MB886 using xda app-developers app
I also am on TMOUS, the best I've gotten is 5.3 Download 2.7upload on edge.
Im not sure why but I cannot use 3g.Not for a lack of trying though.(tried many apn settings,and even playing with the Dev radio settings)
I want to set the facts straight. The only T-Mobile frequencies that are compatible with the bands on our 'specific' devices are for 2G, Recently T-Mobile has refarmed their towers to support unlocked AT&T devices like ours, specifically they refarmed the towers in 'certain' areas to broadcast and receive 1900 mhz waves that our device's can use for 3G and so called "4G" If you only get 2G that's because there are no nearby towers functioning on the 1900 mhz frequencies.
jeffreygtab said:
I want to set the facts straight. The only T-Mobile frequencies that are compatible with the bands on our 'specific' devices are for 2G, Recently T-Mobile has refarmed their towers to support unlocked AT&T devices like ours, specifically they refarmed the towers in 'certain' areas to broadcast and receive 1900 mhz waves that our device's can use for 3G and so called "4G" If you only get 3G that's because there are no nearby towers functioning on the 1900 mhz frequencies.
Click to expand...
Click to collapse
I would like to add that I own an Atrix 4G on T-Mobile (in Chicago), and I get Edge, 3G AND HSPA+ signals. OP was correct in that the phone wasn't able to connect to the other bands except on 2G until about december 2012 (they expanded in order to entice iPhone users to switch providers).
But currently the MB860 (Atrix 4G) *does* work on HSPA+ (which is often called 4G, even though it is not true 4G LTE), which is still much faster than 3G.
post or send be a copy of your apn settings.I'm in Houston and they've reformed their towers here.
Sent from my MB860 using xda app-developers app
I would love it to already get fast 3g for anything else I also have an ahd
Sent from my MB886 using Tapatalk 4 Beta
Related
I may have gotten in over my head and am wondering if anyone can advise if I just blew it or if there is something I can do.
I am a Cincinnati Bell Wireless (CBW) customer and am less than satisfied with the Motorola XT720 and Samsung Galaxy S.
I looked at the specs for the Atrix (3G Network HSDPA 850 / 900 / 1900 / 2100 ) vs the Samsung (3G Network HSDPA 1700 / 2100 ) and since I thought CBW worked on 1700 and 2100) I thought the Atrix may work on it as I was under the impression that if any one of the 3G bands matched the phone would work.
As a side note - part of my issue with the Samsung is the GPS issues. Part of it is more the issue that CBWs 3G network is not super strong and hence I am on edge even in their 3G coverage area.
Anyhow, I can only get an edge connection. While roaming this week end I did get 3G from time to time. The simple answer may be that I screwed up and bought a phone that I can't get to work with Cincinnati Bell Wireless, but I thought I would place a post out here to see if I am overlooking something. Something odd like AT&T locking out the 2100 or something that there may be a hack to open up which would let the phone work with CBW on 3G or something like that.
If anyone has ideas I would appreciate it. The Atrix is an awesome phone. Not sure that I am ready to pay the AT&T rates over what I have with CBW, especially without unlimited data so I thought I'd put a post out here and see if there is something I can try.
Thanks!
Hey man,
Im in the Cincinnati Market as well and have been with ATT for about, well since they were Ameritech. (long time) i have the Atrix and Lapdock and have been researching switching to CBW for the savings of about 100 per month for my 5 phone plan. I think that the 3g should work but havent verifited that yet. i have unlocked my phone and am taking it to the florence mall CBW to try a demo phone sim to see if i can get 3g. i currently average 1.5 mg download and .5 up load, i have noticed a difference in the towers, in some areas i can get up to 4.5 mb download and 1.5 upload on ATT 3g towers, My ATT guy says that the 4g towers will be turned on in September. should be way faster then. so i will let you know what i find out when i try the CBW sim. but im still unsure about the switch because CBW girl says their 4g is a ways off.
Good luck.
Thanks. Look forward to hearing back. At the moment i cant get it to work and cbw says it won't work.
Sent from my SGH-T959 using XDA App
Any updates on whether the Atrix would work on CBW? I've been debating if I should switch over to Cincinnati Bell when my Verizon contract is up.
Right now all I can say is that voice and edge work but not 3G data. Personally I am getting fed up with some of CBWs practices and policies. The best i have to say is they have an unlimited data option.
Sent from my SGH-T959 using XDA App
The 2100 3g band is for Europe only. The atrix will not work anywhere in north America on the 2100 band and it does not have the 1700 band. Unless your carrier lets you roam on att you will not be able to use 3g
Sent from my MB860 using XDA App
SO, I have a Samsung Focus and I have a HTC Titan (both AT&T Branded). I also have a AT&T 3g Microcell.
BTW, Has anyone seen an AT&T Titan show 3G at all or anything other than 4G?
Anyways... Here is where the AT&T Titan lies about 4G service.... the 3G Microcell only support a maximum of UMTS. It does not support HSDPA, HSUPA, HSPA, HSPA+, or LTE. Only HSPA+ & LTE are official 4G technologies as classified by the ITU.
On my girlfriends and my phone (when attached to the microcell) it shows 4G (we both have Titans). And Yes, I am positive we are on the microcell since both our phones list AT&T Microcell as the carrier.
I think AT&T is starting to pull one over on people with the Titan. Wish I had a Focus S to verify what it says too....
It has been reported that ATT is branding some H devices as 4G, not even H+... but the Titan is indeed H+. I haven't been very far with my Titan yet, so I wouldn't know if it ever shows 3G.
I may be a bit confused with the network types; to my understanding there is
GSM
Edge
3G
H
H+ (aka '4G')
4G LTE
My HTC Titan has shown E for the Edge network as it has also displayed 4G for HSPA + as well.
link68759 said:
It has been reported that ATT is branding some H devices as 4G, not even H+... but the Titan is indeed H+. I haven't been very far with my Titan yet, so I wouldn't know if it ever shows 3G.
I may be a bit confused with the network types; to my understanding there is
GSM
Edge
3G
H
H+ (aka '4G')
4G LTE
Click to expand...
Click to collapse
I know the Titan does have the HSPA+ capability, that was not my gripe. My grip is that AT&T is listing a true 3G network as 4G which is a bold faced lie altogether and causes us to question if we truely are on 4G or not. Not the fact the device support it or not.
SO, all these throttling threads and stuff about 4G can not use the Titan as a testing source as the tester can not trust if they truely are on 4G or not. Thus skewing true testing results and perceived capabilities.
I live in Las Vegas and AT&T has had HSPA+ for a while and recently LTE. The issue I have, is I can't tell which network I am on wether it be 3G, HSPA+ or LTE since the Titan always will show 4G for all of them.
As added info for you about network types, your 3G disgnation is the same as the network types that I listed. 3G Network types include (In order of evolution):
UMTS - True Desgination for 3G
HSDPA - 3.x
HSUPA - 3.x
HSPA - 3.x
The 3.x is where I am not sure about the history of their release but I know one of them was refered to 3.5g before the true 4g designation came out for HSPA+ & LTE.
I don't think the titan has lte support, so you're definitely not on that.
The best way to go about this I guess is finding the diagnostic menu: where you dial some number and it gives you hidden info and options.
Sent from my PI39100 using XDA Windows Phone 7 App
AT&T GoPhone Service here with X310e from Europe, it stay on H all the time, displayed as "3G" sometime.
maybe the way they display the icon on the Europe Phone is different.
Anyone confirm as H is HSPDA+?
BTW, i don't download torrent on my phone either.
Its not exactly a lie. Yes, 4G is now the old 3G. When the other carriers started calling their service 4G, it made AT&Ts service look slower (when reality is that ATT 3G was the fastest).
4G was supposed to be LTE, but the marketing departments screwed that one by trying to one-up each other.
So, the answer is that where you saw 3G previously, you will now see 4G.
I have two microcells and they both show 4G on my Titan as well.
Blame the marketing departments (at all the carriers) for using the 4G moniker where it did not belong.
LTE will hopefully be LTE.
I've seen E, H & 4G on my at&t Titan
You see H? That's a good sign, at least; we can differentiate from E, H and H+. My town is fairly rural and is also a historical district, so I find it extremely suspect that there is 4G wherever I've gone, but I guess we've somehow become modern.
I have also never seen "H", only E and 4G, but I've only been in 3 small towns since I've had my Titan. My "4G" speeds are very 3G-like too... (between 1-2Mbps down and .75Mbps up)
Is there any way to see more detailed radio information in the OS? I dont really trust the indicator at the top of the screen.
As someone quoted the ITU designations. In their final decission it was declared that only technologies being theoretically able to reach speeds of up to 100 Mbps are actually 4G.
This means that WiMax, LTE and HSPA+ don't qualify as 4G. Currently LTE Advanced and WiMax 2 would be the only ones.
The idea of calling HSPA+ 4G as far as I know originates from T-Mobile USA as they are not about to deploy LTE/Wimax anytime soon.
That's even beyond the point. Didn't ATT say HSPA+ users should see actual speeds of around 6Mbps? Many aren't even getting the upper range of "3G" speeds.
I just got off the phone with ATT CS and he did tell me I am NOT in a 4G area, even though my phone is saying so. He told me the nearest 4G area was about 20 minutes south, which is exactly what their data map shows. From that I take that ATT is just calling their 3G network 4G, at least on this phone.
StevieBallz said:
As someone quoted the ITU designations. In their final decission it was declared that only technologies being theoretically able to reach speeds of up to 100 Mbps are actually 4G.
This means that WiMax, LTE and HSPA+ don't qualify as 4G. Currently LTE Advanced and WiMax 2 would be the only ones.
The idea of calling HSPA+ 4G as far as I know originates from T-Mobile USA as they are not about to deploy LTE/Wimax anytime soon.
Click to expand...
Click to collapse
That is false, the ITU adjusted this decision and enveloped HSPA+, Wimax and LTE into the 4G fold.
"As the most advanced technologies currently defined for global wireless mobile broadband communications, IMT-Advanced is considered as '4G,' although it is recognized that this term, while undefined, may also be applied to the forerunners of these technologies, LTE and WiMax, and to other evolved 3G technologies providing a substantial level of improvement in performance and capabilities with respect to the initial third generation systems now deployed,"
http://www.itu.int/net/pressoffice/press_releases/2010/48.aspx
In relation to this post, I have used my Interop Unlocked Focus all around this area and home. On my Focus I enabled the ability for it to show 3G+ areas and I was able to map out areas that were E, G, 3G and 3G+
However, when I trek those same areas with my Titan, I see a somewhat magical "4G" over all 3G and 3G+ areas.
Whether these areas were all H+ capable the whole time is unsure, but somehow I tend to doubt it.
As of yet, I have never seen 3G but I have seen E and G on my Titan.
link68759 said:
I don't think the titan has lte support, so you're definitely not on that.
The best way to go about this I guess is finding the diagnostic menu: where you dial some number and it gives you hidden info and options.
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I just tried that on my Titan by dialing ##3282#, and all the diagnostics are for 3G, HSDPA, no item for HSPDA+, still on screen my phone shows 4G.
arg... is there any way to infiltrate ATT's customer support and actually talk to an engineer, no tricks or PR crap?
I just thought that I'd chime in and say that my HTC Titan shows "3G" when I am at my place of work in Franklin Lakes, NJ.... so it must say 3G for some networks at least.
Do you have an unlocked international phone or an ATT phone?
Is there a Registry Editor for the Titan yet? If so, I wonder if you can change the 4G to what you want it to be like you can on the Samsung Focus? On the Focus, you have the option to change each individual network to show whatever you want it to show.
HKEY_LOCAL_MACHINE\Software\Microsoft\Connectivity \CellularUx\DataConnectionIcon
6G Speeds on Samsung Focus
Using ATT's methods, I've modified my Samsung Focus to receive 6G Speeds. Yes, this is the SAME method ATT uses to get 4G speeds...
They just edit the Registry like I did.
Ok guys I have an atrix 4g running on t-mobile. My question is why cant I get 4g/3g on this phone ? T-mobile runs on the 2100 band and the phone does support that band so why no 4g or 3g? common sense would tell me that if t-mo runs 4g on 2100 and the phone is capable of running on 2100 that it would work. have searched for a total of about 4 hours or so over the past couple days and cant find a straight answer only thing i can find is that att doesnt run on 2100 band yet the phone does. thanks in advance to anybody that can answer and taking the time to read.
are you getting H+ or H? (This is "3.5g") The Atrix 4g is not a true 4g phone.
Because the 2100 spectrum that you're using the phone on now is part of the quad-band gsm which is edge/2g. The difference lies in the bands used for 3g/4g, in which case AT&T only uses 850/1900 and tmobile only uses 1700/2100.
There is also a bunch of things that include HSPA, AWS, WCDMA, and so on and so on but I don't know enough about that to comment.
EDIT: Also, the only phones I know that can be used on both AT&T and Tmobile 3g/4g are "penta-band" phones like some European Nokia phones and the unlocked Galaxy Nexus that needs to be imported as well.
shattar01 said:
Ok guys I have an atrix 4g running on t-mobile. My question is why cant I get 4g/3g on this phone ? T-mobile runs on the 2100 band and the phone does support that band so why no 4g or 3g? common sense would tell me that if t-mo runs 4g on 2100 and the phone is capable of running on 2100 that it would work. have searched for a total of about 4 hours or so over the past couple days and cant find a straight answer only thing i can find is that att doesnt run on 2100 band yet the phone does. thanks in advance to anybody that can answer and taking the time to read.
Click to expand...
Click to collapse
Wcdma=utms=3g
Yes, WCDMA and AWS(1700), as far as I know, are both from UMTS and the differences in regards to 3G between AT&T and Tmobile lie in the spectrum use (850&1900 vs 1700&2100). And both AT&T and Tmobile use HSPA(+) based off their respected UMTS frequencies.
I just don't understand the "leap" in GSM technology that breaks the quad-band compatibility, that's all.
matthew5025 said:
Wcdma=utms=3g
Click to expand...
Click to collapse
Also I've read 850 is att's main spectrum for large areas and 900 for T-Mobile. All higher spectrums are for smaller, rural areas.
If your looking for 3g maybe find a town or, buy a dual band amplifier? That's IF they have 2100 MHz band working where you are located.
Lower bands ie 850/900 are the download streams. 1700/1900/2100 are upload streams. If I'm not mistaken
Also a T-Mobile vibrant supports att, it also has our main band, 850mhz. Again which is the main large areas, like T-Mobile 900mhz. 1700-2100mhz for att/T-Mobile range is only as good as the towns that still has that band currently operating for hspa/3g data. I've seen alot of T-Mobile phones that have 850/1900/2100, and work on att. If they were 1600/1900/2100 did not for me.
You need that lower frequencies to ensure it to work. Then....
Also for regional based frequencies...
http://en.m.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
That link will let you know what that all really means.
I think you are mixing up gsm and umts.
GSM = 2G/Edge
UMTS (HSPA, HSPA+, HSDPA/HSUPA, WCDMA, AWS) = 3G
Have a look here. You will see they label "3G" as "UMTS" which is HSPA/WCDMA. A little more down you can see they label their data as "HSDPA", which is download, and "HSUPA" which is upload. Further delineating the speeds they label either one as UMTS for down and Edge as up, which to me tells me they use gsm for the upload and only use UMTS for download. Either way, there is not a T-mobile phone available that can be unlocked and used on AT&T's 3G, just 2G and vice versa. As I have previously mentioned, you will need a penta-band phone for that.
Ciloteille said:
Also I've read 850 is att's main spectrum for large areas and 900 for T-Mobile. All higher spectrums are for smaller, rural areas.
If your looking for 3g maybe find a town or, buy a dual band amplifier? That's IF they have 2100 MHz band working where you are located.
Lower bands ie 850/900 are the download streams. 1700/1900/2100 are upload streams. If I'm not mistaken
Also a T-Mobile vibrant supports att, it also has our main band, 850mhz. Again which is the main large areas, like T-Mobile 900mhz. 1700-2100mhz for att/T-Mobile range is only as good as the towns that still has that band currently operating for hspa/3g data. I've seen alot of T-Mobile phones that have 850/1900/2100, and work on att. If they were 1600/1900/2100 did not for me.
You need that lower frequencies to ensure it to work. Then....
Also for regional based frequencies...
http://en.m.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
That link will let you know what that all really means.
Click to expand...
Click to collapse
And don't get me wrong, I'm not trying to give anyone a hard time but it's misinformation to tell anyone that a T-mobile phone can work on AT&T 3G.
And I'll say it again, I'm not an expert so if anyone can better explain then I'm all ears (eyes).
live4nyy said:
I think you are mixing up gsm and umts.
GSM = 2G/Edge
UMTS (HSPA, HSPA+, HSDPA/HSUPA, WCDMA, AWS) = 3G
Have a look here. You will see they label "3G" as "UMTS" which is HSPA/WCDMA. A little more down you can see they label their data as "HSDPA", which is download, and "HSUPA" which is upload. Further delineating the speeds they label either one as UMTS for down and Edge as up, which to me tells me they use gsm for the upload and only use UMTS for download. Either way, there is not a T-mobile phone available that can be unlocked and used on AT&T's 3G, just 2G and vice versa. As I have previously mentioned, you will need a penta-band phone for that.
And don't get me wrong, I'm not trying to give anyone a hard time but it's misinformation to tell anyone that a T-mobile phone can work on AT&T 3G.
And I'll say it again, I'm not an expert so if anyone can better explain then I'm all ears (eyes).
Click to expand...
Click to collapse
I am just merely stating that I have a motorola defy on ATT, and it worked great for a long time with great speeds before I got a motorola atrix and infuse.
Im not saying that every tmobile phone will have working talk/text, or data for that matter. I have just posted an idea, or atleast what to look for when you are cruising for phones not labeled for your carrier.
I was getting my motorola defy with the att "grand fathered internet" for 10 dollars a month and it was about 160-420KB/s down, and 80-190KB/s up. but some phones are capable of this, others arent. I have a general idea, and have played with several different carrier cellphones and used them with att and att's 3g data.
Rogers HTC Dream (x2 of them)
Telus Milestone
Tmobile Defy
Rogers Atrix
ATT Atrix (x2 of them)
ATT Infuse
Rogers and Telus actually use the same 3G bands as AT&T so as long as those are unlocked they will work. And I'm not saying an unlocked T-mobile can't work on AT&T, because they can (they both use quad-band gsm) but you can not use an unlocked T-mobile phone an AT&T 3G. That's all I'm saying.
Now, they did make an European version of the Defy that uses the 850 3G band but not the T-mobile "branded" one.
I'm going to stick to my guns on this one because I don't want to give anyone the wrong idea about interchanging AT&T and T-mobile phones and expecting 3G service. I'm fairly certain about this and unless someone can prove otherwise that's how I will think.
Ciloteille said:
I am just merely stating that I have a motorola defy on ATT, and it worked great for a long time with great speeds before I got a motorola atrix and infuse.
Im not saying that every tmobile phone will have working talk/text, or data for that matter. I have just posted an idea, or atleast what to look for when you are cruising for phones not labeled for your carrier.
I was getting my motorola defy with the att "grand fathered internet" for 10 dollars a month and it was about 160-420KB/s down, and 80-190KB/s up. but some phones are capable of this, others arent. I have a general idea, and have played with several different carrier cellphones and used them with att and att's 3g data.
Rogers HTC Dream (x2 of them)
Telus Milestone
Tmobile Defy
Rogers Atrix
ATT Atrix (x2 of them)
ATT Infuse
Click to expand...
Click to collapse
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
Upon further research, I have found this article, where under certain circumstances, you can use an unlocked AT&T iPhone with T-mobile 3G:
http://www.gsmarena.com/tmobile_usa_running_1900mhz_3g_in_some_areas_iphones_invited-news-3537.php
Now, this shows that an AT&T phone can maybe use T-mobile 3G but not the other way around. Again, I'm always up for learning something new but I need references/proof.
Well I do get att 3g on the defy and vibrant. I am currently getting about 300ish KB/s on them and 600+KB/s on my attic, I'm just going with the facts. Those facts are that certain T-Mobile phones will work with Att, provided they have 850mhz band. That allows you in most towns (near me) to get 3g
False.
300KB/s is Edge speed, which is only 2G.
http://en.wikipedia.org/wiki/2G
http://www.phonescoop.com/glossary/term.php?gid=107
That's why you get faster speeds on the Atrix because it actually uses 3G.
Again, both AT&T and T-mobile use quad-band GSM. Which is why you can unlock a T-mobile phone and use it on AT&T, and vice versa, but it is only 2G/Edge and NOT 3G.
http://www.phonescoop.com/glossary/term.php?gid=139
http://www.phonescoop.com/glossary/term.php?gid=3
Furthermore, here are the wiki pages for AT&T and T-mobile which both inlcude frequency charts outlining the technology (2G or 3G) each one uses:
http://en.wikipedia.org/wiki/AT&T_Wireless
http://en.wikipedia.org/wiki/T-Mobile_USA
Here are the charts:
AT&T:
Frequency Protocol Class
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
T-mobile:
Frequency Band Protocol
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
1700 MHz UMTS (W-CDMA)/HSPA/HSPA+ 4G (formerly 3G[34])
1900 MHz UMTS (W-CDMA)/HSPA/HSPA+ 4G
I check for facts and references, I'm only saying what I find in research.
Again, when unlocked, a T-mobile phone can use AT&T 2G/Edge, not 3G
Ciloteille said:
Well I do get att 3g on the defy and vibrant. I am currently getting about 300ish KB/s on them and 600+KB/s on my attic, I'm just going with the facts. Those facts are that certain T-Mobile phones will work with Att, provided they have 850mhz band. That allows you in most towns (near me) to get 3g
Click to expand...
Click to collapse
How do you enable hspa+ on an atrix 4g? I can never seem to get the "H+" or "4g" icon, only H (i've checked inside the phone settings and it is definitely just hspa, not hspa+, or hspa: category 10 or otherwise)
I bought my atrix 4g off craigslist and used it on ATT straight talk for a month and had horrible speeds and never had hspa+ (only hspa) so I had the phone carrier unlocked and took it to tmobile monthly 4g but still I am only getting hspa (not hspa+).
Basically, is this phone capable of getting "pseduo-4g" hspa+ or is it locked to hspa? I've seen several mentions of ATT shipping the phone with hspa+ disabled, but no way of knowing how to enable it.
Other info: I am currently using neutrino ROM.
Thanks!
You will only get edge on t mobile with any att phone.............
Sent from my MB865 using Tapatalk 2
Well, its now an unlocked phone and I know I get more than edge because I have hspa right now.
tgeo said:
Well, its now an unlocked phone and I know I get more than edge because I have hspa right now.
Click to expand...
Click to collapse
I already gave you the answer... If you believe you can get 3g with an atrix 2 on t mobile, you must be a hero.
The bands are not compatible. A quick google search will plainly show you that.
Sent from my MB865 using Tapatalk 2
fireforhire said:
I already gave you the answer... If you believe you can get 3g with an atrix 2 on t mobile, you must be a hero.
The bands are not compatible. A quick google search will plainly show you that.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Except that Tmobile is refarming their 1900mhz pcs from 2g to 3g... so yeah you can. Las Vegas and Kansas City are already official... so what?
---------- Post added at 05:56 PM ---------- Previous post was at 05:52 PM ----------
Also, someone correct me if I'm wrong, the Atrix 4G does 14.4mbps hspa, isn't the 21mbps the actual hspa+?
I know it may not be possible but, Hes talking about an ATRIX 4g. Not ATRIX 2. READ MUCH???
Sent using AT&T DROID BIONIC.
The Atrix 4G and the Atrix 2 both support T-Mobile's "4G" network which is simply HSPA+ but the best you'll do with the Atrix 4G is 14.4 Mbps (good luck getting that actual speed). The Atrix 2 can hit the 21.1Mbps but not the 42Mbps speeds, and again, good luck with that.
The Atrix 4G is fully capable of being used with T-Mobile now that they are refarming/rolling out their 3G and "4G" 1900 MHz band, people in some areas still haven't gotten the upgrade yet but in many places in the US you can get 3G speeds and even the "4G" HSPA+ with that device on T-Mobile without issues. Here in Vegas when they turned that on a few weeks back (the day the iPhone 5 was released) I had an Atrix 4G and got T-Mobile 3G/HSPA+ service that afternoon with speeds in excess of 6Mbps because I live across the street from a cell site for them, average is about 3-5Mbps most of the time.
The Atrix 4G will most commonly show HSPA:10 when used with T-Mobile, in my experience (that's on ICS or JB ROMs, GB won't show that level of detail/info).
As for the HSPA or HSPA+, they all basically work the same way. 14.4Mbps is considered under the HSPA+ "umbrella" as the saying might go.
br0adband said:
The Atrix 4G and the Atrix 2 both support T-Mobile's "4G" network which is simply HSPA+ but the best you'll do with the Atrix 4G is 14.4 Mbps (good luck getting that actual speed). The Atrix 2 can hit the 21.1Mbps but not the 42Mbps speeds, and again, good luck with that.
The Atrix 4G is fully capable of being used with T-Mobile now that they are refarming/rolling out their 3G and "4G" 1900 MHz band, people in some areas still haven't gotten the upgrade yet but in many places in the US you can get 3G speeds and even the "4G" HSPA+ with that device on T-Mobile without issues. Here in Vegas when they turned that on a few weeks back (the day the iPhone 5 was released) I had an Atrix 4G and got T-Mobile 3G/HSPA+ service that afternoon with speeds in excess of 6Mbps because I live across the street from a cell site for them, average is about 3-5Mbps most of the time.
The Atrix 4G will most commonly show HSPA:10 when used with T-Mobile, in my experience (that's on ICS or JB ROMs, GB won't show that level of detail/info).
As for the HSPA or HSPA+, they all basically work the same way. 14.4Mbps is considered under the HSPA+ "umbrella" as the saying might go.
Click to expand...
Click to collapse
I didn't know tmob where deploying a hspa frequency that at&T use. Thanks for that tip.
10Mbps achieved on Atrix on at&T 3g network here http://forum.xda-developers.com/showthread.php?t=1905464
hspa category 10 is 'characterized' as hspa+ but is not hspa+ (evolved hspa) and should not display h+ or 4g on the status bar for that reason. The 4g branding is exactly that... "branding" and at&T should have never used 4g in the name in my opinion. They always said "4g like speeds"
See post #4 at http://forum.xda-developers.com/showthread.php?t=1912716 where there are also a couple links I posted that I found interesting on this subject.
Sent from my MB860 using Tapatalk 2
Hmm, interesting info guys. I do indeed live in Vegas and have been using a GB ROM (maybe I'm not seeing hspa: category 10 because of this).
Sounds like I've done all I can then, thanks!
tgeo said:
Hmm, interesting info guys. I do indeed live in Vegas and have been using a GB ROM (maybe I'm not seeing hspa: category 10 because of this).
Sounds like I've done all I can then, thanks!
Click to expand...
Click to collapse
Only ics and jb display the additional radio info.
The key is that you are on a radio that is suited to your rom and provider. 36p and 37p are the two most popular at&t radios, 37p being the official production release and used on many releases. Both 36p and 37p operate at hspa 10. Each provider is at differing phases, as well as having differing standards in their network, for how they implement the any bells and whistles of cellular. There is so much to it.
Sent from my MB860 using Tapatalk 2
Terrible speeds with H+ Icon. Hspa marked as H+.
I am only getting Edge, Umts and HsPa.. My phone marks hspa as H+. I check on status and Umts and Hspa is marked as H+.. My speeds are terrible, only getting 1.8 mbps.
ASPTHEONE said:
I am only getting Edge, Umts and HsPa.. My phone marks hspa as H+. I check on status and Umts and Hspa is marked as H+.. My speeds are terrible, only getting 1.8 mbps.
Click to expand...
Click to collapse
Might get the app on Google Play called Antennas, it'll show you the cell sites/towers you're connected to on maps; if you're connected at a given mode (like HSPA or UMTS) but you're pretty far from the site/tower, that could be the primary reason you get the "terrible" speeds. Antennas does work best, however, by putting the phone in 2G/EDGE mode but it is capable of doing 3G/4G/HSPA/UMTS/etc as well.
I live literally across the street from the main site/tower that I stay connected to so I pull 5-8Mbps when I'm in HSPA+ mode but, I keep my Photon in 2G/EDGE mode probably 99% of the time, I have Wi-Fi at home also so there's just no reason to use up any of my 5GB of bandwidth for the "4G" side of things.
T-Mobile 1900 mhz service on Atrix 4G in MD!!
So having played with a couple of 4Gś @ work (and how unawesome they made my G2x look!) I purchased a combo phone and lapdock. This before i realized they worked on different frequencies!!! DOH!
Fortunately, T-Mobś been ahead of me on the curve. I read that they started the long road to providing their service to the souls stranded out in Verizon &/or AT&T limbo...
So I swapped my sim and...Yaaaay! 4 of 5 bars of....wait for it... H+!!!:laugh:
Then, BOOOOO! No data! No MMS. No internet!:crying:
A few hours of online (and Iḿ ashamed to say, trial and error build prop editing) plus 3 calls to T-Mob yielded this in an email:
¨APN settings for data and picture messaging (MMS): Android" on T-mobileś support page (as a noob I cannot post the link):silly:
Iḿ now docked, working, spotifying and sharing ´ẃif my XDA fam!¨
Hope this helps!
Is there an app or command to log the different frequency bands available in an area? I'm thinking of getting a Galaxy Note 2, but the Note 2 doesn't support the 1700MHz frequency band, and I'm on T-mobile. Any way to figure out if the new phone will get reception, other than just plonking down ~$650 and hoping for the best?
TheEyes said:
Is there an app or command to log the different frequency bands available in an area? I'm thinking of getting a Galaxy Note 2, but the Note 2 doesn't support the 1700MHz frequency band, and I'm on T-mobile. Any way to figure out if the new phone will get reception, other than just plonking down ~$650 and hoping for the best?
Click to expand...
Click to collapse
You will have EDGE coverage anywhere, but I wouldn't buy an expensive new phone that doesn't support 3G for your carrier.
Why aren't you buying via T-Mobile, that does support their speeds?
https://www.t-mobile.com/shop/phone...ll-phone=Samsung-Galaxy-Note-II-Titanium-Gray
stevedebi said:
You will have EDGE coverage anywhere, but I wouldn't buy an expensive new phone that doesn't support 3G for your carrier.
Why aren't you buying via T-Mobile, that does support their speeds?
https://www.t-mobile.com/shop/phone...ll-phone=Samsung-Galaxy-Note-II-Titanium-Gray
Click to expand...
Click to collapse
First, because the phone is at least $70 more expensive on T-mobile's store.
Second, even that version of the phone does not do HSPA+ over 1700 MHz (it's actually the same N7100 you see everywhere). The trick is, T-mobile is supposedly switching all of their 1700-band HSPA+ towers to 1900 band, partly in preparation for their LTE rollout and partly because that's the only way they'll be able to get the iPhone to work with their network, but they haven't gotten it done everywhere and I'm concerned that I'll plop down ~$600 on a phone that only gets 2G speeds at work.
TheEyes said:
First, because the phone is at least $70 more expensive on T-mobile's store.
Second, even that version of the phone does not do HSPA+ over 1700 MHz (it's actually the same N7100 you see everywhere). The trick is, T-mobile is supposedly switching all of their 1700-band HSPA+ towers to 1900 band, partly in preparation for their LTE rollout and partly because that's the only way they'll be able to get the iPhone to work with their network, but they haven't gotten it done everywhere and I'm concerned that I'll plop down ~$600 on a phone that only gets 2G speeds at work.
Click to expand...
Click to collapse
You had me worried so I looked it up. According to the news sources I found, T-Mobile is converting it's 1900 2g towers to support HSPA+. So for the present the current 3G network is not in danger. I suppose my Amaze will continue working for a while!
Where did you see a report that they are changing out the 1700 band HSPA+ towers?
-----
"In May, T-Mobile's chief technology officer Neville Ray said the company would be repurposing its existing 1900MHz 2G service with 4G HSPA+, in order to "provide customers with the ability to use a broader range of devices, including the iPhone, on T-Mobile's 4G network.""
http://appleinsider.com/articles/12...nvert_its_4g_network_to_support_apples_iphone
stevedebi said:
You had me worried so I looked it up. According to the news sources I found, T-Mobile is converting it's 1900 2g towers to support HSPA+. So for the present the current 3G network is not in danger. I suppose my Amaze will continue working for a while!
Where did you see a report that they are changing out the 1700 band HSPA+ towers?
-----
"In May, T-Mobile's chief technology officer Neville Ray said the company would be repurposing its existing 1900MHz 2G service with 4G HSPA+, in order to "provide customers with the ability to use a broader range of devices, including the iPhone, on T-Mobile's 4G network.""
http://appleinsider.com/articles/12...nvert_its_4g_network_to_support_apples_iphone
Click to expand...
Click to collapse
Almost every tech news site that discusses the 1900 band refarming mentions that the reason is to re-deploy 1700 for LTE (that, and to get the iPhone running on T-mobile because Apple outright refuses to make the iPhone pentaband for some reason). It's a fairly easy Google away.
TheEyes said:
Almost every tech news site that discusses the 1900 band refarming mentions that the reason is to re-deploy 1700 for LTE (that, and to get the iPhone running on T-mobile because Apple outright refuses to make the iPhone pentaband for some reason). It's a fairly easy Google away.
Click to expand...
Click to collapse
The link I provided quoted a t-mobile representative. And I got it from a Google search...
Sent from my IdeaTabA2109A using xda premium