Related
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
Hello comunity, First of all, I have a WT19 with ICS original + root +version .587. (I have block boot)
I do this, when i try to install the real ics:
1. Mode cwm
2. wipedata/factory reset
3. wipe cache partition
4. Go to advanced: Wipe dalvik cache y (not BATTERY STATS, i don´t know why)
5. Go to mounts and storage: format /cache, format/data y format /system (no FORMAt /SD-EXT, i don't know why too)
6. Next I install zip from sdcard, choose zip from sdcard y begin the installation of realics6.zip.
7. Next i go to REBOOT SYSTEM NOW.
NOTE: I do all of this, but THE BIG PROBLEM:crying:, is when my phone start with the OS, just stay in the image of SONY. And restart and restart....and just stay in the image of sony.
Someone can help me?? Thks a lot!
Usually, i only wipe data, cache, dalvik, n battery.
Never format system. N never got any problem.
Just reflash stock .ftf
Sent from my Nokia 3310 using Tapatalk 2
chepoz said:
Usually, i only wipe data, cache, dalvik, n battery.
Never format system. N never got any problem.
Just reflash stock .ftf
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
Funny, the only thing that i restore is system..
Remember that you need to be on stock ICS fw
boliviano12 said:
Funny, the only thing that i restore is system..
Remember that you need to be on stock ICS fw
Click to expand...
Click to collapse
What's funny?
Sent from my Nokia 3310 using Tapatalk 2
Did you flash the custom kernel???
Echelonex said:
Did you flash the custom kernel???
Click to expand...
Click to collapse
He said he has a locked bootloader, and the Real ICS is supposed to work on both locked and unlocked bootloaders, you even have an option to pick whether yours is locked or unlocked during installation.
I have the same problem. My LWW device has blocked bootloader (unlock not allowed), and was running rooted stock 4.0.4 .587 prior to update.
After installing Real ICS r5.2 I'm stuck on the Sony logo.
After installing Real ICS r6 it gets stuck in a bootloop (Sony logo-->Boot animation-->Restart)
Luckily I can still boot into recovery and restore my rooted stock ICS. Later I will try flashing the Real ICS Lite version, though I really wanted the full version.
Since I cannot post in the development section I'm asking you guys to help, please.
Additional info:
- I wiped user data, cache, dalvik cache before updating.
- I don't want to unlock my bootloader (again the Real ICS is supposed to work on locked BL too)
- Yes my stock ICS was rooted, had CWM Recovery installed, backups created.
EDIT: Problem solved, apparently you need to manually format /system along with /data, /cache and /dalvik cache before flashing!
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Flash the recovery from the computer and try again. You don't have to reboot where you did, you have to continue with the steps.
Did you increase your system partition?
Or it wouldn't work
Sent from my Xperia Neo V using xda premium
Flash via flashtool
Sent from my LT18i using xda app-developers app
thanks guys
thank u so much guys it helped me a lot
Please Suggest Me a Working ROM FOR MY Xperia NEO L
Please suggest me a working rom that works perfectly like jelly bean
please help
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
dabas.dabas said:
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
Click to expand...
Click to collapse
Just flash the CM7 kernel and you'll be up and going.
say no to Drugs and ICS!
plz help me....???
Jerin1991 said:
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Click to expand...
Click to collapse
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
tukulu1991 said:
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
Click to expand...
Click to collapse
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
i have solvd that...
Attitude.SSJ said:
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
tukulu1991 said:
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
Click to expand...
Click to collapse
can u share the img file and the recoverymod file? i mean the the file that u use to repair this problem..
thankyou
Sola stuck at Sony boot logo
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
just flash the kernel and you will be able to boot to recovery then flash the rom..
Sent from my Xperia Neo V using xda app-developers app
ribek said:
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
Click to expand...
Click to collapse
switch on the phone.
Connect using USB cable in ON condition.
After sometime switch off.
Connect in flashmode
Remove
Connect in Fastboot mode
Now try flashing. If it does not work
try SEUS http://sony-ericsson-update-service.en.uptodown.com/
Hit thanks if it helps
where to find kernel for xperia pro rom kitkat
mksallam said:
where to find kernel for xperia pro rom kitkat
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1642480 see this
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Dont worry Bro!! i ve got The solution!!
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Zedfailon said:
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Click to expand...
Click to collapse
did u wipe Dalvik Cache!???
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Note: After installation, first boot may take several minutes (to create cache, dalvik cache etc.) to start your device. Leave your device for 20-30 minutes to settle down the rom. Also at first boot you may notice a high ram usages (less free ram). It is natural because android system occupy a lot of memory while settling down the new rom. After 30-40 minutes reboot your device and you are now ready to fly with your newly installed rom.
Click to expand...
Click to collapse
Sent from my SK17i running stock ics (.587)
yes
superRiyaz said:
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
did u wipe Dalvik Cache!???
Click to expand...
Click to collapse
Yes i've followed every instruction. (wipe dalvik cache, cache, format system, format data) but still i cant go through the sony logo. Now my current rom is the stock rom ics build no. 587. Rooted and installed cwm
Btw, thanks for the reply
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Yes bro. I did it twice already and the same thing happened. I chose xperia mini and followed all other stuff in the aroma installer, untick the reboot device, etc. But still no luck of going through the sony logo. i've left my phone for over 1hour and its still in the sony logo.
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
z1WV said:
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
Click to expand...
Click to collapse
Yes i've selected it. And it still doesn't work. Any help? I really want to use that rom so bad.
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
tym0 said:
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
Click to expand...
Click to collapse
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Zedfailon said:
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Click to expand...
Click to collapse
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
mihahn said:
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
yeah i've never seen a feedback from people that's using the zelly cream rom with a stock kernel, maybe the problem is with the stock kernel. Now i'll try some other custom roms out there maybe they'll work with the stock kernel and a locked bootloader.
Thanks for the support guys!
BTW superRiyaz, mihahn,z1WV,tym0
Hey guys! i've made the rom working for my xperia mini! all i did is install again and follow again the instructions! i don't why the third time i tried to install this rom is working! I did all the same steps again and im shocked that it go through the sony logo!
anyways thanks for cooperating guys! you got my thanks! i'm done with my problem!
Edit: Sorry didn't see the above post. Happy you solved your problem.
tym0 said:
Edit: Sorry didn't see the above post. Happy you solved your problem.
Click to expand...
Click to collapse
yeah thanks anyway
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
ur000s said:
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
Click to expand...
Click to collapse
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
mihahn said:
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
SE wt19i
ur000s said:
SE wt19i
Click to expand...
Click to collapse
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
mihahn said:
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
I actually didn't do that, because when i reboot from CWM (after installing rom) that's where the sony logo flashes in about 10s intervals.
unable to install custom rom
Hi guys..Currently I'm using "Sony Ericsson Xperia Mini Pro".I have rooted my phone by "Flash Tool" for Sony, I also unlocked my bootlocker too that time.
After the rooting process has been finished I have installed "ROM manager" from Play Store. Then I install "CWM v5.0.2.7" via ROM manager. But the whole problem is that now i can't istall custom ROM for my device. Because in the CWM recovey menu it is showing "Xperia Arc[v03] {ICS}".
I am able too wipe factory data, cache and delvik cache, it is also showing installation process of custom rom.After the installation process completed, my phone is not booting into Custom Rom. Its repeatedly showing sony icon, then it is automatically rebooting. I took back up for my phone also,and I can also recover from that.Also I tried "X-parts" app from play store, and installed cwm for xperia 2011 series. But the same "Xperia Arc" is showing till now.
note: I followed all the steps[/B]
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3