Hi all
I purchased what seemed to be a xt910 from ebay once arrived it worked on the android gb retailasia.03 , what was weird about it is that the outside was branded with verizon and behind was written on the phone xt912 while the about page said it was a XT910.
On the phone was superuser which i guess it had to be rooted
I messed up and used Matt's utility to tro to update the phone to ics and got stuck in a bootloop it wont start , go into recovery or anything i have been trying to flash with verizon ics , gb , asiaretail ics and gb it is very confusing since i dont know if it's a verizon or xt910 orignally.
I have not been updating over 4.0.4 since i read that once you update you can't turn back although i tried to update it never booted and received errors on RSDLITE 5.7 cdt.bin Failed on every time
I was low on battery and ordered a factory cable from ebay , If this is helpfull
I am hopeless and gave it to a shop , of course he couldn't do it so this is my last resort and anyn help will be much apreciated i couldn't even use and tryout this amazing phone and yet i have it 1 month stuck on fastboot
I am currently located in israel and people just don't know this stuff here
i will provide pictures as well and hope some of you can help me since i am a noob in this and it's way more complicated then i expected
IT will be greatly apreciated
thanks!
Jeremy S
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
adamivie said:
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
Click to expand...
Click to collapse
Thank you for responding , you mean in mat's utility? which i used 1.7 ? i can't access anything in the boot menu when opening recovery it will reboot in ap fastboot mode.
thank you
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
adamivie said:
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
Click to expand...
Click to collapse
I understand well i tried what you say the motorola red logo appears for 1 second after pushing the recovery option and then goes back to Fastboot it doesnt go further to the option of wipe/data i think i must have corrupted the bootloader or something
Thanks for trying to figure it out
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Yea. Try to use Matt's 1.90 utility for the Razr
I have replied ya fo ya question just check ya inbox and try that .
Thx
Please hit that thanks button if i helped ya
Gus194 said:
Yea. Try to use Matt's 1.90 utility for the Razr
Click to expand...
Click to collapse
So i tryed using Matt's Utility 1.7 and i attached the results still a lot a failed messages i added the 6.16.211 update on the sd card and that didn't work i am afraid to update to jelly bean and if it doesn't work ill be stuck and could maybe not go back to ICS .
My current Bootloader is on 0A.6C and am still stuck on the bootloader with error (Invalid sp data , 0x0004E , CG system)
Since my recovery is corrupted i am not able to install anything before it flashes correctly
thank you guys for trying to figure it out with me
jerjer01 said:
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Click to expand...
Click to collapse
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
I have tryed using CMD flashboot commands to flash and put system_sugned and recovery into the same folder and it still failed at the same errors it would with razrutility 1.6,1.7,1.82 thanks maybe i need to put xt910 flashboot files since matts utility has no effect and although it looks like a xt912 i received the phone with asiaretail xt910 firmware which then i screwed with matt's utility to to update to ics
I am very desperate to make it work please help me guys ,
jerjer01 said:
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
Click to expand...
Click to collapse
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
jerjer01 said:
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
Click to expand...
Click to collapse
Eh..no...Maybe my english is too bad to explain.Give me your email or somethig,I will update to somewhere to let you download it.
Sent from my XT910 using xda app-developers app
I would really like to make this phone work and for this reason i am giving out a reward (donation) to the one who goes with me through the process and help me unbrick my phone
Thanks!
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
我顶你个肺隔膜 said:
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Follow the steps below.
1.Doawload a RsdLite,you can find it online.
2.Download a XT912 Jellybean Fastboot
File on internet.
3.Connect your phone to the computer with AP mode.(You can get into AP mode with this way ress the volume - button and power button about 10 seconds,when the screen turns into black,release the power button and keep pressing the volume button.)
4.Run the RSDLite,pull your Fastboot file into the RsdLite window,click the button in the middle.Wait the process over and the phone will reboot automaticly.
If your really can solve the problem in tjis way,dont give any donation to me,donation isnt the reason why I want to help.
Sent from my XT910 using xda app-developers app
unfurtunately that didnt work out and it failed as well
any other tips are very wecome
thank you
Related
MY RAZR IS IN STATE OF SOFT BRICK, WHEN WILL ISSUED AN ORIGINAL ROM file-base SBF TO FLASH WITH RSD LITE? PLEASE HELP ME!
Have you tried hard reset it?
yes but doesn't work, i wait a sbf file to flash with rsd lite!
I do not believe they make sbf's anymore they switched to fxz's with the bionic but either way you may be waiting a while
Yea if I were you go exchange it
Sent from my DROID RAZR using xda premium
OP, how'd you do it?
Sent from my DROID RAZR using xda premium
I accidently uninstalled Blur, now the text message app, contacts, and pretty well everything don't work. Anyway to get it back
P.S. I figured since we are on the topic of soft brick, why waste a thread.
Hmm and this is why Verizon is so strict on returns/exchanges now. People messing up their own phones and stating its a manufacterer defect. Not to sound rude or anything, but perhaps a little research was in order first? That or atleast wait for a sbf if you're going to be delete happy.
A word to all that rooted
Adb pull /system before playing with it
Sent from my XT910 using XDA App
Can I fastboot system.img on locked bootloader phone?
Sent from my XT910 using XDA App
polaris441 said:
Can I fastboot system.img on locked bootloader phone?
Sent from my XT910 using XDA App
Click to expand...
Click to collapse
I would advice against it. I played with fastboot flash and although it said flash fail, the next time I turned on my phone, I would go straight into the fastboot menu with a Fastboot (Fail Flash). If anyone do encounter this error, there is a easy fix (at least for me), just hold vol up+vol down when turning on, and select Normal boot. Done.
If you've got a system.img with the right files and signatures, you'll be able to recovery your system in most cases.
kholk said:
If you've got a system.img with the right files and signatures, you'll be able to recovery your system in most cases.
Click to expand...
Click to collapse
Any instruction on how? i have all of the IMG files because i have a back up
why not have someone share a dump with you?
Im having a similar issue i was replacing some stock apps with adb by pushing them and rebooted when i was done. Now im stuck in a bootloop and i cant connect the phone to adb with the usb no matter how hard i try.
thars sys dump
Thars a sys dump in razr form that should Fix it. Ps i want sbf or a stock flash
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
For the stock apps gust facter rest aka flash data it reinstalls them only stock ones and superuser
have you try flashing your phone using fastboot files like explained in developers section..?
system dump
Not sure if I have what you need but I have the Motorola Droid Razr Xt910 Rogers. I did an ADB bull of the system folder and zipped it. If you need that I'll upload to Megaupload or something.
If you need an .img file you'll have to give me instructions on how to do it. I've been having trouble trying to get the partitions pull such as modem, system, kernal, etc.
FrAsErTaG said:
A word to all that rooted
Adb pull /system before playing with it
Sent from my XT910 using XDA App
Click to expand...
Click to collapse
Should we do the Adb or softbrick it? I saw that there is a softbrick recovery on another thread
This thread Will eventually Passout
I think it's not a problem, download full SBF ROM you want to flash, unpack to any folder, run phone in AP Fastboot mode and use this:
http://forum.xda-developers.com/showthread.php?t=1453660
Droid Razr
lukas77 said:
I think it's not a problem, download full SBF ROM you want to flash, unpack to any folder, run phone in AP Fastboot mode and use this:
http://forum.xda-developers.com/showthread.php?t=1453660
Click to expand...
Click to collapse
Thanks, i tried this method but my device still won't fully boot. i hear the noise that my device should make when it's meant to boot however it didn't boot
HELP!!!
MattyOnXperiaX10 said:
Thanks, i tried this method but my device still won't fully boot. i hear the noise that my device should make when it's meant to boot however it didn't boot
Click to expand...
Click to collapse
I even get the green light when my phone is stuck on the animation, my phone even recognises that the phone is connected to the pc but still i get no response from the device its self to boot up out of the animation. My phone recognises all button touches (volume keys) but after flashing with both the rsd method and non rsd method it still won't work. I have even tried re downloading the rom but no luck
If you're getting to the boot animation it won't be a hard brick. Flash again, try using Fla**** instead of RSD, then wipe.both data and cache from stock recovery.
Sent from my XT910 using xda premium
lukas77 said:
I think it's not a problem, download full SBF ROM you want to flash, unpack to any folder, run phone in AP Fastboot mode and use this:
http://forum.xda-developers.com/showthread.php?t=1453660
Click to expand...
Click to collapse
Flash as pointed in above post
After rsd flashing do
Factory reset
Wipe dalvik cache
Wipe user data
Thanks!
Sent from my XT910 using Tapatalk
Holyish
LOL, YOU LOT DONT UNDERSTAND< I tried all methods but they didn't work. I KNOW HOW TO FLASH BECAUSE I HAVE A TUTORIAL ON IT.
However i figured out after a while that if i recently tried to update to 2.3.6, my phone must be trying to upload something from the sd, so i removed my sd card and instantly i was put into the home launcher
I dunn0 if that made sence
MattyOnXperiaX10 said:
LOL, YOU LOT DONT UNDERSTAND< I tried all methods but they didn't work. I KNOW HOW TO FLASH BECAUSE I HAVE A TUTORIAL ON IT.
However i figured out after a while that if i recently tried to update to 2.3.6, my phone must be trying to upload something from the sd, so i removed my sd card and instantly i was put into the home launcher
I dunn0 if that made sence
Click to expand...
Click to collapse
If you don't have it working you're doing it wrong. You obviously haven't tried it all. Try clearing all caches and then flash new sbf. Please note it will take quite a while to do "first boof"
Sent from my DROID RAZR using Tapatalk
Superthrust said:
If you don't have it working you're doing it wrong. You obviously haven't tried it all. Try clearing all caches and then flash new sbf. Please note it will take quite a while to do "first boof"
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
Dude.....read my last comment. I hav flashed before ..loads of time. It was jus that my phone was trying to load a file from the SD
OMG. Counter Strike On Android! http://cs-portable.net/
Nevermind lol.
wut? huh? wtf?
iolinux333 said:
wut? huh? wtf?
Click to expand...
Click to collapse
Hahaha don't comment
OMG. Counter Strike On Android! http://cs-portable.net/
Before I explain the problem let me type and show you what my droid razr (CMDA) does everytime i boot since last night
AP Fastboot Flash Mode (S) (Recipe Failure)
0a.66
Device is LOCKED. Status Code:0
Battery OK
OK to program
Transfer Mode:
USB Connected
AKA the problem is the Recipe failure. Now I can successfully RSD to 744,748,and 173 however when i reboot i have to hold power + volup/down and go to normal power up to continue. Biggest issue i have is having to do this EVERY SINGLE TIME which also makes getting into recovery a pain.
I can put up pictures if need be but they will taken with my xoom. AKA not all that great.
-Derrick
Comment if you need more details. Dont ask for android version. I've flashed 744, 748 via OTA, and 173. Yes i've RSD'ed with the newest RSD, I've also used Matt's Droid Razr Utility 1.51, and I've used windows cmd promt and the fastboot.exe to fastboot the files manually.
No such luck.
Any help PLEASE!
You tried a wipe data on Motorola Recovery?
I got that problem, when i first flashed an rom (don't know if the text on screen was the same) Always booted into AP.
So i wiped Data with Motorola Recovery and everything works fine.
Gesendet von meinem XT910 mit Tapatalk
I think i had this problem more than once. I'm pretty sure its a mismatch of mbmloader to the rest of your system. I fixed it by manually fastbooting the whole .173 zip
Sent from my DROID RAZR using XDA
SilentViper said:
I think i had this problem more than once. I'm pretty sure its a mismatch of mbmloader to the rest of your system. I fixed it by manually fastbooting the whole .173 zip
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
+1 What he said.
I got this same behavior the first time I RSD'ed back to 173 when an OTA update failed. I ignored the errors from the default XML file. I fixed the errors in the XML, reflashed the whole image, and it worked.
Edit the XML, remove the two operation = "oem" entries, save, RSD.
Yeah I have the 744, 748, and 173 zips. I even tried manual fastboot, the utility, and RSD and i still get it.
When I did try the RSD I used a homemade USB host cable so from what i hear from hashcode its possible i corrupted one of the system partitions with a bad usb transfer and since i was doing so on a low battery level thats also a possibilty as to what caused the issue.
My main question is there anyway to reset the versions of the paritions without us having a means unlock the BL?
I have the same problem with my razr maxx.
anyone can help us to solve it?
derrickmehaffy said:
Before I explain the problem let me type and show you what my droid razr (CMDA) does everytime i boot since last night
AP Fastboot Flash Mode (S) (Recipe Failure)
0a.66
Device is LOCKED. Status Code:0
Battery OK
OK to program
Transfer Mode:
USB Connected
AKA the problem is the Recipe failure. Now I can successfully RSD to 744,748,and 173 however when i reboot i have to hold power + volup/down and go to normal power up to continue. Biggest issue i have is having to do this EVERY SINGLE TIME which also makes getting into recovery a pain.
I can put up pictures if need be but they will taken with my xoom. AKA not all that great.
-Derrick
Comment if you need more details. Dont ask for android version. I've flashed 744, 748 via OTA, and 173. Yes i've RSD'ed with the newest RSD, I've also used Matt's Droid Razr Utility 1.51, and I've used windows cmd promt and the fastboot.exe to fastboot the files manually.
No such luck.
Any help PLEASE!
Click to expand...
Click to collapse
After flashing, do a factory reset/wipe user data and wipe cache in recovery menu. Will fix it.
Thanks
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
After flashing, do a factory reset/wipe user data and wipe cache in recovery menu. Will fix it.
Thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Which method I should use flashing rom ,RSD or RSD alternitave? Thank your help.
retyings said:
Which method I should use flashing rom ,RSD or RSD alternitave? Thank your help.
Click to expand...
Click to collapse
if you are on Android ver.2.3.6 use RSD alternative.
retyings said:
Which method I should use flashing rom ,RSD or RSD alternitave? Thank your help.
Click to expand...
Click to collapse
Both will work. With RSD lite you have a safe verification of signature of the rom.
Cheers
Sent from my XT910 using Tapatalk 2
SilentViper said:
I think i had this problem more than once. I'm pretty sure its a mismatch of mbmloader to the rest of your system. I fixed it by manually fastbooting the whole .173 zip
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
how do you manually fastboot all files
hi guys....i'm getting fail to boot 4 message when turning on my phone. it happened after flashing 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf coz i had a boot loop after flashing a custom ROM and forgot to wipe data. i got a unlocked phone using deprunlock.sbf. i also tried reflashing 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf but when i get to "Switching device to BP Pass through..." its goes to "Error Switching device to BP Pass through.." and fails flashing....need help pls!
Are you able to get in fasboot mode or android recovery? Or is it the standard failed to boot 4 rsd starting error?
Sent from my MB855 using xda app-developers app
mof9336 said:
Are you able to get in fasboot mode or android recovery? Or is it the standard failed to boot 4 rsd starting error?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
its the standard failed to boot 4 starting rsd mode. can this still be fixed?
Make sure your battery has a good charge( do the usb trick if you have to) and try flashing another sbf. Did you try the derpunlock.sbf
Sent from my MB855 using xda app-developers app
mof9336 said:
Make sure your battery has a good charge( do the usb trick if you have to) and try flashing another sbf. Did you try the derpunlock.sbf
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
sorry but i'm kinda new to Motorola Phones, what is the usb trick?last night i tried flashing the 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf but had the re-enumerate error coz i ran out of battery. Will try still get a charger today but i'm really intrigued about the usb trick thingy....could you help me out?
Google charge any phone with out a charger. Lot a videos on it
Sent from my MB855 using xda app-developers app
mof9336 said:
Google charge any phone with out a charger. Lot a videos on it
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
ahahahahaha....it looks kinda wierd....but anyways when i get a good charge....what's the next thing i should do?should i flash the 198_7?i tried deprunk last night but didn't work....failed to flash....
G69D said:
ahahahahaha....it looks kinda wierd....but anyways when i get a good charge....what's the next thing i should do?should i flash the 198_7?i tried deprunk last night but didn't work....failed to flash....
Click to expand...
Click to collapse
thanks for your help man....fixed my phone now....thanks a lot!
G69D said:
thanks for your help man....fixed my phone now....thanks a lot!
Click to expand...
Click to collapse
my phone is also showing Failed to boot 2
please share how you managed to restore it.
thanks
portman said:
my phone is also showing Failed to boot 2
please share how you managed to restore it.
thanks
Click to expand...
Click to collapse
I too am getting the failed to boot 2 after the motorola update came out. please explain how to fix this issue please
mrperez83 said:
I too am getting the failed to boot 2 after the motorola update came out. please explain how to fix this issue please
Click to expand...
Click to collapse
go to fastboot mode and find android recovery. wipe date and cache. then reboot your phone. download the 198_7 and flash using RSDLite....that should put you on stock ROM.hope it helps you guys....
Do not flash any sbf, after ota update installation.
how you fixed your phone
G69D said:
thanks for your help man....fixed my phone now....thanks a lot!
Click to expand...
Click to collapse
hi sir,
i have the same error as you had please help me how to fix this and which sbf file i need to download and flash it.......
on starting screen it says "failed to boot error 4"
thank you
G69D said:
its the standard failed to boot 4 starting rsd mode. can this still be fixed?
Click to expand...
Click to collapse
please explain me for fixed failed to boot 4 or please upload file img for fix this trouble
thank's
I was using D-WiZ ROM (3.0.2) with BMM (3.0.2 also)... I erased my cid a few weeks ago ( I clicked on the backup but... it seems it didn't backed up :/ ) changed to latest EU ICS kernel and after noticing a battery drain with the ROM, I decided to fastboot to 4.0.4 so I could get everything back to normal... The process went okay but when it tries to boot... the black screen appears. I tried using BP tools but it's stuck at boot animation -.-
Any ideas? Thanks in advance <3
Re: [Q] Bricked my phone :\ PLEASE HELP :'(
Someone please help me :/
AW: [Q] Bricked my phone :\
Wipe data and try to reboot again.
Sent from my BataKanged XT910
How can I wipe data? I can only access the stock recovery!
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Ive faced this before. Also from d-wiz. But i can totally say its my fault. Dunno about u,but.
1) The custom recovery is gone because I didnt untick the reboot option in the last phase of rom installation.(The OP n even the aroma installer clearly state to untick,back to custom recovery 1st before 1st reboot)
2) I also face the black screen issue after flashing stock with rsd. But turn out when i flashed other rom,means,download another choice of rom but still for the region,it worked ok at last. Maybe u should try?
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Ive faced this before. Also from d-wiz. But i can totally say its my fault. Dunno about u,but.
1) The custom recovery is gone because I didnt untick the reboot option in the last phase of rom installation.(The OP n even the aroma installer clearly state to untick,back to custom recovery 1st before 1st reboot)
2) I also face the black screen issue after flashing stock with rsd. But turn out when i flashed other rom,means,download another choice of rom but still for the region,it worked ok at last. Maybe u should try?
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Do you have to boot with BP tools? 'Cause the main proble here is that my CID is erased and it doesn't want to boot stock :\
Arachnida said:
Do you have to boot with BP tools? 'Cause the main proble here is that my CID is erased and it doesn't want to boot stock :\
Click to expand...
Click to collapse
Oh my.. Which means u didnt put ur backup of cid in a safe place.. Then i guess even if im in ur place,i won't know what to do.. Sorry..
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Oh my.. Which means u didnt put ur backup of cid in a safe place.. Then i guess even if im in ur place,i won't know what to do.. Sorry..
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
It didn't even backed up :\ I realized when I was searching for it :S:S what's the name of the cid backup? so I can search again in my SD.
Arachnida said:
It didn't even backed up :\ I realized when I was searching for it :S:S what's the name of the cid backup? so I can search again in my SD.
Click to expand...
Click to collapse
Its cid.img
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Its cid.img
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Can I fastboot the cid.img? or how can I try installing one? Sorry for bothering :/
Originally Posted by williemeiser<br />
Its cid.img<br />
<br />
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
<br />
<br />
Can I fastboot the cid.img? or how can I try installing one? Sorry for bothering :/
Click to expand...
Click to collapse
Apparently we cant. Its unique for every single device,if im not mistaken.
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Apparently we cant. Its unique for every single device,if im not mistaken.
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Yeah I know it's unique but I saw someone who could do it just to boot... so my question is, can I install the .img while on stock recovery or in another way? I just want to try any option :\
I don't wanna lose $300 right away u.u
Anyone can help me?? Still no phone
Arachnida said:
Anyone can help me?? Still no phone
Click to expand...
Click to collapse
Did you tray another ICS OTA? I have my CID on dropbox and mail and other places, but I remember flashing to Stock ROM with RSD without CID and it boot
If you can enter into stock recovery, try wipe/format cache and factory reset. Then fastboot with rsd.
Then root your phone, but remember after it reboots (during root) to reboot using BPtool.
Then you can retore your CID. If you lose it, you can boot only using bptool or BMM wich can handle the missing CID
Try flashing a GB ROM with RSD Lite, then booting BP Tools.
Its my only suggestion.
But as long i know...if you lost your cid, you're screwed up bro.
I never had to worry about CID (i have a unlocked bootloader) but i still have a backup of it on my computer, googledrive, email and dropbox
heblu said:
If you can enter into stock recovery, try wipe/format cache and factory reset. Then fastboot with rsd.
Then root your phone, but remember after it reboots (during root) to reboot using BPtool.
Then you can retore your CID. If you lose it, you can boot only using bptool or BMM wich can handle the missing CID
Click to expand...
Click to collapse
I will try this first and I hope it works :\
pablobhz said:
Try flashing a GB ROM with RSD Lite, then booting BP Tools.
Its my only suggestion.
But as long i know...if you lost your cid, you're screwed up bro.
I never had to worry about CID (i have a unlocked bootloader) but i still have a backup of it on my computer, googledrive, email and dropbox
Click to expand...
Click to collapse
Then I will try this one
Thanks for the answers guys...
If anyone else have opinions, PLEASE POST THEM.
I still have no phone :\ This backup blackberry phone sucks, I want my razr back
If your phone shows the bootanimation, then I think there's no problem. Just make a factory reset from stock recovery and reboot.
blackhawk_LA said:
If your phone shows the bootanimation, then I think there's no problem. Just make a factory reset from stock recovery and reboot.
Click to expand...
Click to collapse
When I hit ''recovery'' on the menu (power button + vol up/down) it enters and show's an image of an android robot laying in the ground with an exclamation sign... how can I wipe data, factory reset, etc?
OMG IT WORKED AFTER THE FACTORY RESET, WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOT
THANKS A LOT, THIS IS THE BEST DAY EVER :')
Got accepted by germany so I can go to study there and got my phone fixed omg
THANKS!!!!