Hello,,
I am trying to flash a rom. my SG i9300 crashed but but i still can access recovery and download mode.
mounting system and data and cache says:
Code:
Error mounting /system!
Error mounting /data!
Error mounting /cache!
Code:
Odin tells the following :(
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me please.
thanks
eng.helewa said:
Hello,,
I am trying to flash a rom. my SG i9300 crashed but but i still can access recovery and download mode.
mounting system and data and cache says:
Code:
Error mounting /system!
Error mounting /data!
Error mounting /cache!
Code:
Odin tells the following :(
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me please.
thanks
Click to expand...
Click to collapse
closed all the background running kies processes? installed all the GS3 drivers? also tried all the ports on the pc? sometimes loose connections cause such errors. (happened to me many times)
Fails try another firmware download .
jje
sriram231092 said:
closed all the background running kies processes? installed all the GS3 drivers? also tried all the ports on the pc? sometimes loose connections cause such errors. (happened to me many times)
Click to expand...
Click to collapse
Thanks for replay ..
i tried that and i do not have kies.
i have samsung drivers of SGS3 Toolkit
i tried all ports and it is not working.
i think the problem is with the device in the recovery mode it can not mount /system and /data and /cache
What does the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
What does the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
it says nothing
i think it couldn't write to the sdcard !!
Download mode not recovery mod .
Vol Down + Home + Power .
jje
could flashing with PIT and repartition solve the problem ?
if so please provide me a links to download resources
Never mention repartition
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Never mention repartition
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Oky Boss i will not mention it again.
So what to do .. the device not boot
What does it say in download mode.
Do you have warranty ???
jje
JJEgan said:
What does it say in download mode.
Do you have warranty ???
jje
Click to expand...
Click to collapse
it says nothing .. i do not have warranty
Nothing ???
Can you access download mode ??
Is battery charged ???
What model phone .
What rom where you trying to flash ??
jje
JJEgan said:
Nothing ???
Can you access download mode ??
Is battery charged ???
What model phone .
What rom where you trying to flash ??
jje
Click to expand...
Click to collapse
Access download mode : Ok
Access Recovery Mode: Ok
Rom: MIUI V5 For Galaxy S 3
Recover title says:
CWM-based Recovery v5.5.0.4 :: CF-v1.5
firmware i am trying to flash now is : KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5
Thats very old recovery upgrade to Philz recovery .
However download mode saying nothing suggests dead phone hardware problem .
jje
i flashed right now a recovery from SGS3 Toolkit and it worked
Code:
recovery-stock-ella-GTI9300.tar
but flashing any rom fails
MIUI V5 is based on 4.1.1 i guess! that was not a good thing to flash! 2 members already asked you about download mode.but you didn't mention about it! get into download mode and post the things you see on the left top corner like PRODUCT NAME, BINARY COUNTER...etc.,
\
sriram231092 said:
MIUI V5 is based on 4.1.1 i guess! that was not a good thing to flash! 2 members already asked you about download mode.but you didn't mention about it! get into download mode and post the things you see on the left top corner like PRODUCT NAME, BINARY COUNTER...etc.,
Click to expand...
Click to collapse
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOD: Yes (5 counts)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
Android Logo
Downloading...
Do not turn off target!!
Thats all .. i thought that is normal and they ask about something odd
sorry about that
The intention is to logical rule out known major problems based upon multiple identical posts .
Related
I was trying to upgrade my S2 form gingerbread to ICS from odin. When it nearly finished it said fail. After that I Disconected my phone And Try to reboot but It said software update fail. I Cant get in to Download mode or Recovery Mode Anything I Can do?
Sorry for my English.
Borwonsarid said:
I was trying to upgrade my S2 form gingerbread to ICS from odin. When it nearly finished it said fail. After that I Disconected my phone And Try to reboot but It said software update fail. I Cant get in to Download mode or Recovery Mode Anything I Can do?
Sorry for my English.
Click to expand...
Click to collapse
which ICS firmware u tried to load, can u mention the file name of the same.
Sun90 said:
which ICS firmware u tried to load, can u mention the file name of the same.
Click to expand...
Click to collapse
I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3_HOME.tar
Borwonsarid said:
I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3_HOME.tar
Click to expand...
Click to collapse
just try this.
1) remove the battery from phone.
2) hold the Voldwn + home + pwr button simultaneously.
3) reintroduce the battery now and see if u can enter dwnld mode.
no i cant get in to download mode when it boot up it said software update fail
Sent from my GT-S5570 using xda app-developers app
Is this hardbrick or softbrick
Sent from my GT-S5570 using xda app-developers app
tell us more, there is nothing in yout screen? your battery is good? your file is correct? have you checked md5 sum before start flashing process?
Sent from my GT-I9100G using xda app-developers app
Now my Phone is Stuck on GSII logo. And I can get in to Download Mode but when I Flash with Odin but I Fail. How Do I Check MD5?
Borwonsarid said:
Now my Phone is Stuck on GSII logo. And I can get in to Download Mode but when I Flash with Odin but I Fail. How Do I Check MD5?
Click to expand...
Click to collapse
are you still having the same error message?
there are programs for that on the net, you need the md5 hash from where you downloaded the file,
if you can open the package with winrar or 7zip your file is good, if you get an error message it means broken file
if you can enter to download mode now I suggest you to download again the file, or try different odin version (i use 1.85 and never got a problem) and a different usb port may be
Sent from my GT-I9100G using xda app-developers app
crzr said:
are you still having the same error message?
there are programs for that on the net, you need the md5 hash from where you downloaded the file,
if you can open the package with winrar or 7zip your file is good, if you get an error message it means broken file
if you can enter to download mode now I suggest you to download again the file, or try different odin version (i use 1.85 and never got a problem) and a different usb port may be
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
I try 1.83 1.85 this is the error massage
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use this firmware I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5
search for I9100GXXLPN (4.0.3) but the XXLPY should work, I've tried both on my phone
crzr said:
search for I9100GXXLPN (4.0.3) but the XXLPY should work, I've tried both on my phone
Click to expand...
Click to collapse
I've Tried I9100GXXLPN It won't work
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> MLO
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
destrife said:
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
How do you mean by pls explain more I download i9100G
destrife said:
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Can you write normal ? 50% doesn't understand "dl(download),u(you),rite(right)"
And next time read previous posts
@Op
He ask do you download FIRMWARE for gt-9100G
Send form Galaxy S2. But I don't have it :-\
Paulius7 said:
Can you write normal ? 50% doesn't understand "dl(download),u(you),rite(right)"
And next time read previous posts
@Op
He ask do you download FIRMWARE for gt-9100G
Send form Galaxy S2. But I don't have it :-\
Click to expand...
Click to collapse
Yeah I got a right firmware
I've tried odin 3.07 It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Borwonsarid said:
I've Tried I9100GXXLPN It won't work
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> MLO
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Wow, there is something weird with your phone mate, odin can't write anything on your phone, your cable is ok?
Sent from my GT-I9100G using xda app-developers app
crzr said:
Wow, there is something weird with your phone mate, odin can't write anything on your phone, your cable is ok?
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Now It Start write Something when it about to finish It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Borwonsarid said:
Now It Start write Something when it about to finish It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Click to expand...
Click to collapse
It doesn't write anything 'cause the writing process start by writing factoryfs.img, doesn't appear on your log
Sent from my GT-I9100G using xda app-developers app
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Look for @Hopper8 thread. Great thread lots of info on Odin problems
No Luck!
andrewwright said:
Look for @Hopper8 thread. Great thread lots of info on Odin problems
Click to expand...
Click to collapse
Hi,
I read through and tried flashing with siyah v6 but even that failed.
Not really sure what the issue is!
mosesadarsh said:
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Click to expand...
Click to collapse
Doesnt seem like the phone is charging either!!
Flash philz kernel and then you should be able to get to recovery then flash a custom Rom
Read this bro
http://forum.xda-developers.com/showthread.php?t=2101610&page=2
Hope it helps !!
I tried everything possible but nothing worked. . I got stuck at factoryffs every time then hit xmit data failure. . M sure I hard bricked it now! ! Must be the motherboard. .
can someone please post links to the philz kernel and a stable india version JB firmware !! Please please ... im desperate!!
Search!! Dont be lazy its not hidden or hard to find.
seriously bro?? I found the thread to that kernel but that list is never ending.. God knows which kernel is for my phone!!
Only comment if you have answers please !!!!
All the videos that i watched online show how to install philz kernel on a working phone.
My phone is kinda dead... so what needs to be done after flashing philz kernel? Tell me the next steps please..
Does it still go to download mode? Does odin still see it?
I tried flashing my phone with philz kernel but even that failed...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSK-ODD-4.92.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<OSM> All threads completed. (succeed 0 / failed 1)
Make is easy on your self and flash lss firmwear and flash lss kernel "near the top of download list" chances are you dont have an os now odin has failed to flash. Hooper8 thread has good info on flashing problems! Read that before you try.
Pics clicked a minute back... does this help...
Pls read hooper8 thrsad
Any joy now op?
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
mosesadarsh said:
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
Click to expand...
Click to collapse
Same problem here, my phone was working fine then all of a sudden i noticed it was dead, tried rebooting it, nothing happened, boot loop, tried to access CWM, i got the lower section menu of CWM but nothing else, a black screen with the buttons.
So next i said, let me use odin to flash a new kernel. That failed and ever since that failed, i cannot do anything except enter download mode. If i power the phone on, i get a [phone-problem-computer] image in yellow with text that says somehting like problem loading software, please conntect to kies recovery mode. of course that never works.
And everytime i try to flash absolutely anything on this device, Odin DOES see the device, and the second i press flash/start, when it reacher nand write start, it hangs there, stuck doing nothing.
I took the phone to a friend who has an Riff jtag box, he soldered his jtag to the phone and said the memory chip is not dead, i can read its capacity normally. But when he tried to write to it, it did not work, kept giving him errors, he said he has never encountered such a behavior before. And then i had to leave.
Up to now, my phone is still dead and i have no idea what to do. It only enters download mode, but at the same time, this is useless since flashing anything simply does not work. Anyone knows what the reason could be?
FYI, i was on NeatROM 5.5, which comes with Philz Kernel.
NAND is stuffed/corrupted. How/why - who knows ? Motherboard replacement if you've already tried JTAG. Could be something hardware going on that caused the chip to become 'damaged'.
Hi, I was trying to upgrade my Samsung Galaxy S3 i9300 ; firmware version 4.1.1 to 4.3
On my first attempt I used:
* I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6_HOME.tar
* Odin 3.07
I turned my phone off, then I went to Download Mode (power + volume down + home buttons), opened the Odin 3.09, opened the tar file on the PDA, ticked F Reset and Auto Reboot and start!
After this odin finished as:
Complete(write) operation failed! ...
On the download screen this is the following information:
Product Name: SGH-I747
Custom Binary Download: Yes (8 counts)
Current Binary: Custom
System Status: Custom
Qualcomm Secureboot: Enable
Unsupport Dev_Type
As you can see the product name is different now. But it is an i9300 as i confirmed on settings before upgrading (and on the battery slot).
I have tried with 2 or 3 differents firmwares and it keeps giving the same error.
Phone will not show Samsung Logo right now, it shows: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Kies does not detect the phone, but the pc and odin does.
Please help.
If it's really a i9300 then it should just be a matter of flashing the right file.
Please try this german 4.3 ROM: http://goo.gl/aJMX7K
If it doesn't work find a threepart-firmware for i9300 (with PIT-file included) and flash it.
Still presenting the issue
Benko111 said:
If it's really a i9300 then it should just be a matter of flashing the right file.
Please try this german 4.3 ROM: LINK ABOVE..
If it doesn't work find a threepart-firmware for i9300 (with PIT-file included) and flash it.
Click to expand...
Click to collapse
Hi, thanks for your response! This was my destiny:
<ID:0/ 004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300DBTGMK2_ I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot. img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On device:
Product name: sgh-i747 (Probably this is what is causing this issue, but it is a i9300)
Unsupport dev_type
I'll still look for more softwares !
re
Ovejox said:
Hi, thanks for your response! This was my destiny:
<ID:0/ 004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300DBTGMK2_ I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot. img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On device:
Product name: sgh-i747 (Probably this is what is causing this issue, but it is a i9300)
Unsupport dev_type
I'll still look for more softwares !
Click to expand...
Click to collapse
Hi. Try chimera tools and flash rom.
I'm beginning to suspect you are on commission for chimera...
It looks like the op flashed a firmware for the i747, try the rescue firmware from general forum else a repair centre.
Sent from my GT-I9300 using Tapatalk
That would definitely be my next step as well. Try the 3-part rescue firmware with PIT.
What do you mean on device it says SGH-i747? Where on device, when it trys to boot? That's from the incorrectly flashed firmware but
should normally be overwritten by the correct firmware without problem.
Again, if you're positiv it really is a i9300 the rescue firmware should do:
http://direct.xda-developers.com/showpost.php?p=30087735
You do need to ensure you get the correct firmware and to do this you need Kies to work.
Uninstal Kies then download Kies and install again, download the 4.3 version, then start Kies go to tools and select the Firmware Upgrade and Installation, follow the instructions, hopefully for you it will see the phone, following the process should wipe the phone and install the correct firmware for it, once this is done the phone should boot up, after that you should have a working phone.
Seems very odd your phone shows i9300 in the About Phone and under the battery but not when you go into download mode it shows the US / Canada phone model.SGH-i747
Hi
I am very new to this forum.Recently I bought a not 2 gt n7100 from ebay.I tried to upgrade it using omnirom 4.4.2 nightly and gaps.I have downloaded the cwm ,ROM and gaps into the SD card.System updated and m stuck in the startup screen with the Samsung logo.Unfortunately I didn't create the backup.Now when I tried to root the phone via Odin it shows snoot.bin ;nand write start;complete operation failed.m worried have I crashed my MB.is there any way to fix it.help will be appreciated. Thanks
dnaha said:
Hi
I am very new to this forum.Recently I bought a not 2 gt n7100 from ebay.I tried to upgrade it using omnirom 4.4.2 nightly and gaps.I have downloaded the cwm ,ROM and gaps into the SD card.System updated and m stuck in the startup screen with the Samsung logo.Unfortunately I didn't create the backup.Now when I tried to root the phone via Odin it shows snoot.bin ;nand write start;complete operation failed.m worried have I crashed my MB.is there any way to fix it.help will be appreciated. Thanks
Click to expand...
Click to collapse
Higher chances your phone can easily be recovered
The only problem is if you havent backed up ur data u could loose it.
Im not sure if u can back it up at this stage unless its on the external memeory card.
Method 1:
- Copy over the flashable OMNI ROM Zip file to an external memory card then insert in phone
- remove battery,
- re-insert battery,
- hold MENU KEY + VOLUME UP + POWER KEY for like 3 - 5 seconds then release
- The phone will enter recovery mode
NOW if it happens to be CWM recovery (u just flashed) and not the Original Stock recovery
then you could do a DATA WIPE / WIPE DATA normally deletes the apps and not personal files but I believe OMNI ROM uses a different file system compared to original Samsung stock ROMS so if your flashing was successful and ur pohone is just suffering from a bootloop then ur personal data (pictures, videos , personal files) may have already already been have wiped. eboot and u could be good to go with OMNI ROM
OR u could use the same recovery to flash the OMNI ROM Zip file on the external SD Card... (google or search on XDA how to flash a ROM using CWM Recovery)
Method 2: will set everything as how it was before if above fails or is complicated
My advice Flash a samsung STOCK ROM using Odin (u need to google or search on XDA on how to flash the phone with Odin ///pretty easy though)
Also download a samsung stock ROM version which was currently on your phone when you bought the phone not any later versions unless your phone was updated via OTA then download that version just to avoid some possibilites of corrupting the EFS..you can download most samsung stock ROMs from here
Your phone should be restored to stock and should work fine. If u still need to use Omni ROM or any other ROM (in most cases) then u would need to ROOT ur stock rom , flash CWM and flash your ROM. but just after rooting its always a good idea to backup ur EFS Folder/EFS Partition (These two links may help you link 1 link 2)
Note: if you dont tick REPARTITION while flashing with Odin chances are your data on the internal memory could be available and not erased just a heads up
Thanks...
But it failed.I have used odin 3.09 the rom which i have downloaded is N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 when i try to flash using odin following msg displays
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is there any fix for this???
dnaha said:
Thanks...
But it failed.I have used odin 3.09 the rom which i have downloaded is N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 when i try to flash using odin following msg displays
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is there any fix for this???
Click to expand...
Click to collapse
Ok i used to have a similar if not the same problem. Are u in download mode when you perform the flash? Try flashing with an Older Odin version1.85 attached here it helped me numerous times .. the newer ones never worked for me. also send me screenshots before & after you flash you phone of odin
Suddenly phone freezed and restarted and asked me to reset to remove encryption
then when i tried formatting using TWRP it displays the following
Unable to open '' to wipe crypto key
unable to format to remove encryption
Updating partition details......
Failed to mount '/efs' (Invalid Argument)'
Failed to mount '/cache' (Invalid Argument)'
Failed to mount '/System' (Invalid Argument)'
Failed to mount '/data' (Invalid Argument)'
Failed to mount '/preload' (Invalid Argument)'
...done
unable to mount storage
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
please let me know how to push CWM from odin . Can you please assist me here
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Help please
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
emptywordsss said:
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
Click to expand...
Click to collapse
Format /cache through recovery (philz). Mounts and Storage --> Format /Cache.
shivadow said:
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I tried flashing with Odin and Heimdall. All i get at the end is failed. Odin fails at NAND and heimdall runs till 100% for all whatever i choose. Suggest me any procedure on how to check if my internal storage is intact and can be retrieved. So that i can atleast sleep peacefully.
reinzl said:
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
RajeshVV said:
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
reinzl said:
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Tried flashing PIT and was unsuccessful. Not sure if the data partition is intact and if so how to know its presence and the status of it.
Anyone solve this problem? I'm using N7100 and get this problem too
Tried to flash PIT with new odin version always noti "failed",
with 3.0.7, 3.0.9, odin freeze at "Get PIT for mapping..", I waited more than 30 minutes but nothing happen,
Tried to flash stock ROM but failed at "NAND Write Start!!"
Someone please help me fix this problem.
Are you using the original Samsung USB cable? Tried other USB cables and USB 2.0 ports?
oh, hi audit13,
Of course I used original Samsung USB cable, I changed some other cables, and USB ports(2.0, 3.0) to test, but nothing new.
I think no one can fix this problem, bring to cell store is the best choice
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
audit13 said:
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
Click to expand...
Click to collapse
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Everytime it end with this failed.
If I flash only PIT, It will stop at
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
I waited for 1 hour but nothing change.
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
audit13 said:
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
Click to expand...
Click to collapse
"the bootloader in the phone is newer than bootloader in the rom"
Sorry, but how to know bootloader in the phone is newer than bootloader in the rom?
I flashed Roms with Android ver 4.4.4, 6.0.1, 7.1.1, and don't know much about bootloader, can you help me find my bootloader ver and find the way to resolve this problem. Thanks