I was trying to upgrade my S2 form gingerbread to ICS from odin. When it nearly finished it said fail. After that I Disconected my phone And Try to reboot but It said software update fail. I Cant get in to Download mode or Recovery Mode Anything I Can do?
Sorry for my English.
Borwonsarid said:
I was trying to upgrade my S2 form gingerbread to ICS from odin. When it nearly finished it said fail. After that I Disconected my phone And Try to reboot but It said software update fail. I Cant get in to Download mode or Recovery Mode Anything I Can do?
Sorry for my English.
Click to expand...
Click to collapse
which ICS firmware u tried to load, can u mention the file name of the same.
Sun90 said:
which ICS firmware u tried to load, can u mention the file name of the same.
Click to expand...
Click to collapse
I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3_HOME.tar
Borwonsarid said:
I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3_HOME.tar
Click to expand...
Click to collapse
just try this.
1) remove the battery from phone.
2) hold the Voldwn + home + pwr button simultaneously.
3) reintroduce the battery now and see if u can enter dwnld mode.
no i cant get in to download mode when it boot up it said software update fail
Sent from my GT-S5570 using xda app-developers app
Is this hardbrick or softbrick
Sent from my GT-S5570 using xda app-developers app
tell us more, there is nothing in yout screen? your battery is good? your file is correct? have you checked md5 sum before start flashing process?
Sent from my GT-I9100G using xda app-developers app
Now my Phone is Stuck on GSII logo. And I can get in to Download Mode but when I Flash with Odin but I Fail. How Do I Check MD5?
Borwonsarid said:
Now my Phone is Stuck on GSII logo. And I can get in to Download Mode but when I Flash with Odin but I Fail. How Do I Check MD5?
Click to expand...
Click to collapse
are you still having the same error message?
there are programs for that on the net, you need the md5 hash from where you downloaded the file,
if you can open the package with winrar or 7zip your file is good, if you get an error message it means broken file
if you can enter to download mode now I suggest you to download again the file, or try different odin version (i use 1.85 and never got a problem) and a different usb port may be
Sent from my GT-I9100G using xda app-developers app
crzr said:
are you still having the same error message?
there are programs for that on the net, you need the md5 hash from where you downloaded the file,
if you can open the package with winrar or 7zip your file is good, if you get an error message it means broken file
if you can enter to download mode now I suggest you to download again the file, or try different odin version (i use 1.85 and never got a problem) and a different usb port may be
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
I try 1.83 1.85 this is the error massage
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use this firmware I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5
search for I9100GXXLPN (4.0.3) but the XXLPY should work, I've tried both on my phone
crzr said:
search for I9100GXXLPN (4.0.3) but the XXLPY should work, I've tried both on my phone
Click to expand...
Click to collapse
I've Tried I9100GXXLPN It won't work
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> MLO
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
destrife said:
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
How do you mean by pls explain more I download i9100G
destrife said:
u got rite firmware? u dl i9100 firmware or i9100G firmware?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Can you write normal ? 50% doesn't understand "dl(download),u(you),rite(right)"
And next time read previous posts
@Op
He ask do you download FIRMWARE for gt-9100G
Send form Galaxy S2. But I don't have it :-\
Paulius7 said:
Can you write normal ? 50% doesn't understand "dl(download),u(you),rite(right)"
And next time read previous posts
@Op
He ask do you download FIRMWARE for gt-9100G
Send form Galaxy S2. But I don't have it :-\
Click to expand...
Click to collapse
Yeah I got a right firmware
I've tried odin 3.07 It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Borwonsarid said:
I've Tried I9100GXXLPN It won't work
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> MLO
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Wow, there is something weird with your phone mate, odin can't write anything on your phone, your cable is ok?
Sent from my GT-I9100G using xda app-developers app
crzr said:
Wow, there is something weird with your phone mate, odin can't write anything on your phone, your cable is ok?
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Now It Start write Something when it about to finish It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Borwonsarid said:
Now It Start write Something when it about to finish It Stuck(freeze)on <ID:0/005> MLO And Stay on Download mode forever
Click to expand...
Click to collapse
It doesn't write anything 'cause the writing process start by writing factoryfs.img, doesn't appear on your log
Sent from my GT-I9100G using xda app-developers app
Related
I'm desperated right now. I Tried to install an original 2.3.4 XWKI1 rom, but in odin, with all options right and yellow icon, the update starts but when will start the rom write appear an error and said FAIL! in red upthere.
I Tried another original rom and the same error. I don't khow what to do. Sorry for the english... i know if have other theads about this, but no one solve my problem.
When i start the phone appears: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
But the kies don't recognize the phone
ODIN ERROR:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_JDI_I9100WBKK1_I9100UHKJ1_I9100JDIKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry if i broken any rules, and HELP ME please!
What model phone have you got?
Eg: I9100
Sent from my GT-I9100 using XDA App
Yeah, GT-I9100
Maybe flashing a firmware with PIT?
with the five files. I Found this in other topic with the same issue:
"I encountered the same problem. And I was able to solved it by flashing it with xxkg6 stock firmware downloaded from sammobile.com.. The file must contain 5 files that includes the pit file. I know most of the thread advised not to touch the pit file but I just did(I took the risk). When I loaded the pit file, it automatically checked the re-partition option.. After 5mins my gs2 has born again.."
If you have Kies loaded at same time/in background close it. You cant flash via ODIN while Kies is running.
i killed all running process from kies... i'll try with a firmware with PIT and check re-partition (XXKG6)
rffslow said:
and check re-partition
Click to expand...
Click to collapse
I wouldn't do that if i were you.
peachpuff said:
I wouldn't do that if i were you.
Click to expand...
Click to collapse
why? i don't see any other solution... i don't know what to do so
Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Odin and Kies don't play well together. Uninstall Kies and try Odin again.
****Non of this is of any importance. Just chill the f**k out and relax****
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
ilovecheesypuffs said:
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
Click to expand...
Click to collapse
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
ilovecheesypuffs said:
Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Click to expand...
Click to collapse
When you flash via PC odin don't use .pit file and don't tick repartition (leave all options in odin default). Rom file open as PDA. It should work.
Regards
Sun90 said:
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
Click to expand...
Click to collapse
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
ilovecheesypuffs said:
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
Click to expand...
Click to collapse
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
preseodymium said:
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
Click to expand...
Click to collapse
ok bit noobish, i can use say USA i9100 firmware and try that?
ilovecheesypuffs said:
ok bit noobish, i can use say USA i9100 firmware and try that?
Click to expand...
Click to collapse
Yes. So long as it is for your firmware.
Sent from my potato.
So yeah, for some days ago i have installed a custom rom this one : Leaked Android 4.2.2 XXUFME3 ROM for Galaxy S III
it worked fine but i wanted to get back to stock rom.
So i downloaded a stock rom ( for nordic countries )
After this i re partioned my s3, i used a file for 16 gb cause its my model. after this the phone turned on and i saw samsung galaxy s3 logo blincking, nothing else heppend. But i knew i wasnt done and took the battery out and back, and entered download mode.
Now i chosed a rom with PDA button, i unchecked re partion and hited start button. Odin was stuck at "setup connection".
I have installed and reinstalled drivers, installed and uinstalled kies, i have tried this on all of my usb ports, i tried this on my other pc with installed drivers etc. Nothing WORKS!!!! i am a noob with Android and really need a help. i Have working to get it work 4 hours and nothing...
Btw i have no sd card in my s3.
It looks like i dont have any firmware on my phone now, but i can still enter download mod, but not recovery mod.
What can i do??
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
JJEgan said:
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
Click to expand...
Click to collapse
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
kris222 said:
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
Click to expand...
Click to collapse
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
sriram231092 said:
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
Click to expand...
Click to collapse
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
kris222 said:
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
Click to expand...
Click to collapse
did you do everything as mentioned in this site? http://androidromupdate.com/2012/06...ung-galaxy-s3-gt-i9300-stock-rom-i9300xxale8/
i did!
the only thing i did wrong was to re partition it......
now i dont know how to get it work...
Try flashing again but with the newest ROM from NEE, if flash successful, probably will boot loop again, enter to recovery mode and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=1646610 2nd post.
Good luck
Regards
[email protected]
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Ver3go said:
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
anyone??
kris222 said:
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
Click to expand...
Click to collapse
Do all in one thick re-partition! And put the pit. And choose pda with your rom
Sent from my GT-I9300 using xda premium
Pretty fun that non experienced people are flashing stuffs, rooting etc etc without reading two or three times before so they learn about what could happen if anything are done the wrong way..
In worst case, warranty is the only solution to fix this and re-program PIT layering of your phone. It may cost if there is any sign of modifications / flash counter above zero...
Sent from my GT-I9300 using xda app-developers app
Go to http://forum.xda-developers.com/showthread.php?t=1944196 post #6
Regards
[email protected]
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
?????
kris222 said:
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
Click to expand...
Click to collapse
Your phone is dead sure worst wont do
Sent from my GT-I9300 using xda premium
I think they will repair it for free
Sent from my washing machine using xda premium
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
you could also try using a jig, but since it goes into download mode just flash the alt odin package.
shangrila500 said:
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
fredi0014 said:
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
Click to expand...
Click to collapse
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Yes different cord,pc and operating systems
"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
2-DOWNLOAD ODIN FROM BELOW LINK & EXTRACT IT ON YOUR DESKTOP
http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
3-Download and Install Moborobo PC Suite from below link It will install Drivers for your phone
http://www.moborobo.com/products/moborobo.html
OR
YOU CAN DOWNLOAD & INSTALL USB DRIVER DIRECTLY FROM BELOW LINK
http://downloadcenter.samsung.com/c...Driver_for_Mobile_Phones_v1.5.23.0-retail.exe
4-NOW FOLLOW BELOW ACTIONS:
1).FIRST CONNECT THE PHONE TO PC IN DOWNLOAD MODE:-
PROCESS FOR DOWNLOAD MODE WRITTEN BELOW
SWITCH OFF YOUR PHONE & PRESS VOLUME DOWN + HOME + POWER TOGETHER YOU LL GET A SCREEN SHOWING WARNING NOW PRESS VOLUME UP IT WILL SHOW YOUR PHONE IS IN DOWNLOADING MODE.
2).THEN OPEN THE ODIN AND YOU LL SEE ID;COM COLOR IN BLUE (IT MEANS PHONE IS CONNECTED).
3).SELECT PDA AND GO TO DESKTOP WHERE YOU HAVE EXTRCTED THAT STOCK FIRMWARE SELECT IT - WAIT FOR CHECKING MD5 TO BE FINISHED CLICK ON START N WAIT FOR 5 MINUTES PHONE WILL BE REBOOT.
DONE YOU HAVE SUCCEFULLY FLASHED STOCK FIRMWARE ON YOUR SAMSUNG GT-S5282.
dashingdwivedi said:
"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
Click to expand...
Click to collapse
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?
Hmmm u can flash other countey s frmware too ... ..nd can select language in setup .....
Its india s frmware.....
Sent from my GT-S5282 using xda premium
Nice work
AdibSul said:
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?
Click to expand...
Click to collapse
It has saved my phone many times . Thanx bro for ur easy guide.
My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?
Wipe user data and cache and then try it
ordinary_laks said:
My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?
Click to expand...
Click to collapse
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country
works like a charm! thanks!
rahulsinghal said:
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country
Click to expand...
Click to collapse
Hit like button is better than commentinf
Sent from my GT-S5282 using Tapatalk
this is odex or deodex!!!
spidys02 said:
this is odex or deodex!!!
Click to expand...
Click to collapse
Odexed
Remember by name Rahul Singhal , thats enough for me
Odexed dude.
Sent from my GT-S5282 using xda app-developers app
My phone is keep booting will it work for me??
Flashed successfuly but net connection is not turning on
What to do?? Plzz help
stock firmware download
Sir GOOD DAY. can you help me. i downloaded ur stock firmware for 4times and its always says unconfirmed network error. does it mean that the file is no longer there?. thanks a lot.
Flashing Stock Firmware on S5282
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad
Need Help!!!!
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help
try to flash the stock rom again before doing reset ur device..... it will work
by the way from past two years m not using it anymore
atulsaini_22 said:
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help
Click to expand...
Click to collapse
for this issue you can flash pre_rooted_stock firmware provided by @Chirtagh ....it has happend to me also so flashed @Chirtagh's prerooted firmware...
tpsonwani said:
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad
Click to expand...
Click to collapse
great. I really need it for my dad's phone.
very very good man very thx