[GUIDE] Flashing Stock Firmware on S5282 - Samsung Galaxy Star

"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
2-DOWNLOAD ODIN FROM BELOW LINK & EXTRACT IT ON YOUR DESKTOP
http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
3-Download and Install Moborobo PC Suite from below link It will install Drivers for your phone
http://www.moborobo.com/products/moborobo.html
OR
YOU CAN DOWNLOAD & INSTALL USB DRIVER DIRECTLY FROM BELOW LINK
http://downloadcenter.samsung.com/c...Driver_for_Mobile_Phones_v1.5.23.0-retail.exe
4-NOW FOLLOW BELOW ACTIONS:
1).FIRST CONNECT THE PHONE TO PC IN DOWNLOAD MODE:-
PROCESS FOR DOWNLOAD MODE WRITTEN BELOW
SWITCH OFF YOUR PHONE & PRESS VOLUME DOWN + HOME + POWER TOGETHER YOU LL GET A SCREEN SHOWING WARNING NOW PRESS VOLUME UP IT WILL SHOW YOUR PHONE IS IN DOWNLOADING MODE.
2).THEN OPEN THE ODIN AND YOU LL SEE ID;COM COLOR IN BLUE (IT MEANS PHONE IS CONNECTED).
3).SELECT PDA AND GO TO DESKTOP WHERE YOU HAVE EXTRCTED THAT STOCK FIRMWARE SELECT IT - WAIT FOR CHECKING MD5 TO BE FINISHED CLICK ON START N WAIT FOR 5 MINUTES PHONE WILL BE REBOOT.
DONE YOU HAVE SUCCEFULLY FLASHED STOCK FIRMWARE ON YOUR SAMSUNG GT-S5282.

dashingdwivedi said:
"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
Click to expand...
Click to collapse
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?

Hmmm u can flash other countey s frmware too ... ..nd can select language in setup .....
Its india s frmware.....
Sent from my GT-S5282 using xda premium

Nice work
AdibSul said:
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?
Click to expand...
Click to collapse
It has saved my phone many times . Thanx bro for ur easy guide.

My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?

Wipe user data and cache and then try it
ordinary_laks said:
My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?
Click to expand...
Click to collapse
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country

works like a charm! thanks!
rahulsinghal said:
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country
Click to expand...
Click to collapse

Hit like button is better than commentinf
Sent from my GT-S5282 using Tapatalk

this is odex or deodex!!!

spidys02 said:
this is odex or deodex!!!
Click to expand...
Click to collapse
Odexed
Remember by name Rahul Singhal , thats enough for me

Odexed dude.
Sent from my GT-S5282 using xda app-developers app

My phone is keep booting will it work for me??

Flashed successfuly but net connection is not turning on
What to do?? Plzz help

stock firmware download
Sir GOOD DAY. can you help me. i downloaded ur stock firmware for 4times and its always says unconfirmed network error. does it mean that the file is no longer there?. thanks a lot.

Flashing Stock Firmware on S5282
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad

Need Help!!!!
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help

try to flash the stock rom again before doing reset ur device..... it will work
by the way from past two years m not using it anymore
atulsaini_22 said:
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help
Click to expand...
Click to collapse

for this issue you can flash pre_rooted_stock firmware provided by @Chirtagh ....it has happend to me also so flashed @Chirtagh's prerooted firmware...
tpsonwani said:
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad
Click to expand...
Click to collapse

great. I really need it for my dad's phone.

very very good man very thx

Related

VerizonGalaxy Note 2 Bricked?

Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
you could also try using a jig, but since it goes into download mode just flash the alt odin package.
shangrila500 said:
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
fredi0014 said:
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
Click to expand...
Click to collapse
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Yes different cord,pc and operating systems

[Q] Flashing ROM with Odin - stuck at cache.img

Hey Guys,
i guess i need your help. I've flashed diffrent ROM's with Odin before so i got an rough idea how it works.
Story so far:
GT-I9100 4.1.2 Official ROM (I9100XWLSD_I9100DBTLS7_DBT) with PhilZ Kernel (PhilZ-cwm6-XWLSD-OXX-4.87).
Phone swithed itself off for any reason and i tried to reboot it. Phone started up and was stuck at the screen with "Samsung Galaxy S II". Nothing happened for like an hour. After waitin i decided to flash the ROM again. And here it just got worse.
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Can anyone help me with this? I'm quite bummed out. I need my phone
Thanks in advance.
Daniel.
i.am.dirt said:
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Click to expand...
Click to collapse
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
immortalneo said:
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
Click to expand...
Click to collapse
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
i.am.dirt said:
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
Click to expand...
Click to collapse
It wouldn't hurt to try then, would it?
Believe me when I say this, but a lot of members have reported this issue before, which led to the creation of the above guide. And its instructions are based to an extent on the successes reported by some members. So try all you can and see what happens! :good:
I've tried to figure it out to what extend different ODIN versions will give different results. Here's what i've been encountered with:
v1.3:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Check MD5.. Do not unplug the cable..
<ID:0/007> Please wait..
<ID:0/007> Checking MD5 finished Sucessfully..
<ID:0/007> Leave CS..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.83:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.85:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
same sh!t here
v3.04:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
what a surprise!
v3.06:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed for any reason
v3.07:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
it doesn't get any better
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
i.am.dirt said:
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
Click to expand...
Click to collapse
Keep trying out everything in that guide and in every possible combinations you can, until you're absolutely sure that your phone's NAND is borked. Then take it to a Service Centre.
Flash a packaged ROM (modem, code & csc) with the 3.06 version.
Sent from...this is not even my S2
i91000 brick at cache
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
milo_sc said:
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
Click to expand...
Click to collapse
i have same problem with my s2. did you fix it ? please reply fast
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
NickSaul said:
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
Click to expand...
Click to collapse
Has anyone tried gastonw's advice yet?
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
justb2 said:
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
Click to expand...
Click to collapse
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
CryserCore said:
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
Click to expand...
Click to collapse
I have the same problem with my s3 neo! I tried to root my phone with Odin , and phone now is bricked. Firat i have installed TWRP , und everything was fine. Than , i tried to flasch superuser to get my phone rooted. Now i canĀ“t reach TWRP (??) , and only thing that i can do ist download mode.
I am tryin to flasch stock firmware through Odin, but ever the same - cache.img error! Help please!
Hi
Please anyone help me
I am also having the same error. It stucks at cache.img. I am trying I9100XWLPT_I9100XXLQ6_I9100XEULPA_HOME.tar.md5 downloaded from sammobile.com
My model is GT-I9100 .
Can anyone help please ?
Earlier , i was having cm-12.1-20151116-SNAPSHOT-YOG7DAO1JN-i9100.zip and one day, it all gone bad. I can only use Odin mode.
I cannot even go to Recovery mode.
I tried boot.bin alone and that runs fine and it shows me Samsung logo screen.
I then tried renaming cache.img to cache.img.tar and that also runs fine .
But overall, it does not run when i think it tries to write to Nand or whatever.
I have tried all version of odin and various cables as well.
Any help will be hugely appreciated.
best regards
I had the same problem.....resolved it by extracting the tar.md5 file to the c:/ directly instead of the desktop...
Yo.
Had the same issue on the GT-I9506.
The issue occurred for me after I had accidentally attempted to flash an auto-root file to bootloader in ODIN, can confirm that flashing CWMR as through PDA solved my issue, as I was then able to flash the same auto-root file direct through PDA.
Hope this helps somebody, as I wasted an hour ****ing around trying to figure out how to fix. ^^

[Q] Rooting"stuck at boot.img

This is my first time rooting any android device.
I have done the following already
1. Installed Drivers with Kies
2. Installed Odin3
3. Downloaded the .md5.tar pre-rooted file 1.1 gb
4. Went into Odin, And selected PDA and choose the .tar file
5. Unchecked the Re-Partion
But! for some reason, it will stop at boot.img
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> prerooted.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
And it will stop. Im using the Samsung USB, and ive changed ports. Nothing seems to work! Help! D:
xxtoxicriotxx said:
This is my first time rooting any android device.
I have done the following already
1. Installed Drivers with Kies
2. Installed Odin3
3. Downloaded the .md5.tar pre-rooted file 1.1 gb
4. Went into Odin, And selected PDA and choose the .tar file
5. Unchecked the Re-Partion
But! for some reason, it will stop at boot.img
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> prerooted.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
And it will stop. Im using the Samsung USB, and ive changed ports. Nothing seems to work! Help! D:
Click to expand...
Click to collapse
would be best if you download stock firmware from sammobile for your sgs3 and flash it again and than download cf auto root for rooting sgs3. u should read guides properly on how to root sgs3 here at xda. i ts available in general sgs3 forum.. if any problem presist or if u need help u can pm me..
Odin won't work with kies installed, you only needed the drivers which come separately.
xxtoxicriotxx said:
This is my first time rooting any android device.
Nothing seems to work! Help! D:
Click to expand...
Click to collapse
Make sure Kies is not running at the same time as Odin and use CF auto root as suggested by suyash1629 the link is in my signature

Nand write starts - and stuck

I have galaxy s3 I9300 16GB
yesterday my phone got in loop of "touchwiz has stopped",
and couldn't do anything.
I tried to wipe cache - but it didn't worked.
I tried to flash new rom, but it failed,
and the phone was stuck on a screen telling me to recover with kies
Kies didn't recognize my device - it just keep connected forever but nothing else
so I search the internet, and advised to repartition the phone using pit file.
I did it, and now samsung logo blinked, and I can't access the volume up menu - only to the download screen.
When I try to flash rom - it starts, and stack on NAND write start - forever
enclosed;
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
please advise
@yalaniv: I guess your internal storage is gone.
What does it mean?
rp158 said:
@yalaniv: I guess your internal storage is gone.
Click to expand...
Click to collapse
Can it be fix?
What should I do now?
@yalaniv: a regular reparation in a service center doesn't make sense. So either look for a cheep way to repair or another phone.
Please find and read this post I just made, follow the directions.
http://forum.xda-developers.com/showthread.php?t=2535367

Help to recover a S2 stucked on boot logo

Hello everyone,
I have installed Resurrection Remix (Resurrection_Remix_KK_v5.1.5-20140609-i9100) and suddenly my phone turned off and stucked at the boot logo.
I can't start the recovery mode only the download mode is possible.
I have tried to reflash the recovery but it doesn't work. I have tried different cables and PCs without any success. I also tried different odin versions.
I think I have a NAND rw issue.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSD-OXX-4.93.6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I have read different threads about stucked phones, but I am unsure which recovery package would be the right one, f.e. http://forum.xda-developers.com/galaxy-s2/development/guide-fix-unflashable-soft-bricked-t1619571
I just want to save as much as possible.
Every help is appreciated.
h3llghost said:
Hello everyone,
I have installed Resurrection Remix (Resurrection_Remix_KK_v5.1.5-20140609-i9100) and suddenly my phone turned off and stucked at the boot logo.
I can't start the recovery mode only the download mode is possible.
I have tried to reflash the recovery but it doesn't work. I have tried different cables and PCs without any success. I also tried different odin versions.
I think I have a NAND rw issue.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSD-OXX-4.93.6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I have read different threads about stucked phones, but I am unsure which recovery package would be the right one, f.e. http://forum.xda-developers.com/galaxy-s2/development/guide-fix-unflashable-soft-bricked-t1619571
I just want to save as much as possible.
Every help is appreciated.
Click to expand...
Click to collapse
Do you installed Samsung drivers firstly? If no, download this and install. Restart PC.
If yes,
Download this kernel (Apollo kernel with TWRP) and flash it! after, you can install what ROM do you want! If you want KK install CM11-M12.
Hit Thanks button if I helped you!
IonutGherman said:
Do you installed Samsung drivers firstly? If no, download this and install. Restart PC.
If yes,
Download this kernel (Apollo kernel with TWRP) and flash it! after, you can install what ROM do you want! If you want KK install CM11-M12.
Hit Thanks button if I helped you!
Click to expand...
Click to collapse
Same odin output as before.
h3llghost said:
Same odin output as before.
Click to expand...
Click to collapse
What version of ODIN do you use?
I have tried 1.8.3, 3.1.6 and the latest one.
try this: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
IonutGherman said:
try this: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
Click to expand...
Click to collapse
I have two issues with that, which package should I choose and the downloads are not available for Germany. Is there another mirror?

Categories

Resources