This is my first time rooting any android device.
I have done the following already
1. Installed Drivers with Kies
2. Installed Odin3
3. Downloaded the .md5.tar pre-rooted file 1.1 gb
4. Went into Odin, And selected PDA and choose the .tar file
5. Unchecked the Re-Partion
But! for some reason, it will stop at boot.img
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> prerooted.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
And it will stop. Im using the Samsung USB, and ive changed ports. Nothing seems to work! Help! D:
xxtoxicriotxx said:
This is my first time rooting any android device.
I have done the following already
1. Installed Drivers with Kies
2. Installed Odin3
3. Downloaded the .md5.tar pre-rooted file 1.1 gb
4. Went into Odin, And selected PDA and choose the .tar file
5. Unchecked the Re-Partion
But! for some reason, it will stop at boot.img
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> prerooted.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
And it will stop. Im using the Samsung USB, and ive changed ports. Nothing seems to work! Help! D:
Click to expand...
Click to collapse
would be best if you download stock firmware from sammobile for your sgs3 and flash it again and than download cf auto root for rooting sgs3. u should read guides properly on how to root sgs3 here at xda. i ts available in general sgs3 forum.. if any problem presist or if u need help u can pm me..
Odin won't work with kies installed, you only needed the drivers which come separately.
xxtoxicriotxx said:
This is my first time rooting any android device.
Nothing seems to work! Help! D:
Click to expand...
Click to collapse
Make sure Kies is not running at the same time as Odin and use CF auto root as suggested by suyash1629 the link is in my signature
Related
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Rempit said:
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
what steps did you do prior to flashing with odin. ?
Did you wipe chache and davik chache ?
did you do a reset/data format ?
flash your file with odin.
if these to steps did not work.
You need to go into recovery do a complete format of your internal sd, then flash with odin. it will work then.
saywhatt said:
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
Click to expand...
Click to collapse
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Rempit said:
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Click to expand...
Click to collapse
You can use the steps, but instead use another file from sammobile.com
Sent from my GT-I9300 using xda premium
Hey Guys,
i guess i need your help. I've flashed diffrent ROM's with Odin before so i got an rough idea how it works.
Story so far:
GT-I9100 4.1.2 Official ROM (I9100XWLSD_I9100DBTLS7_DBT) with PhilZ Kernel (PhilZ-cwm6-XWLSD-OXX-4.87).
Phone swithed itself off for any reason and i tried to reboot it. Phone started up and was stuck at the screen with "Samsung Galaxy S II". Nothing happened for like an hour. After waitin i decided to flash the ROM again. And here it just got worse.
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Can anyone help me with this? I'm quite bummed out. I need my phone
Thanks in advance.
Daniel.
i.am.dirt said:
Using Odin3 v1.85 (Kies tasks killed, original samsung usb cable) i selected the ROM mentioned above and tryed to flash it. At first everything was running good, but the i got stuck at:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
i left it for half an hour or even more... nothing happened. I tried to flash Philz Kernel again, but i got stuck too.
Same for ICS ROM and GB.
I can't get into recovery mode (which i should have done before thinking of flashing stuff )
Download mode is all i can choose now. I'm not getting any further right now.
Click to expand...
Click to collapse
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
immortalneo said:
Odin flash fails? Check out this guide:
http://forum.xda-developers.com/showthread.php?t=2345831
Click to expand...
Click to collapse
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
i.am.dirt said:
Thanks for that fast reply. I've skimmed over that guide and i have to say i've already tryed nearly all of it... that's a bad sign, huh?
I'll try diffrent Odin versions but i've been reading nearly everywhere that v1.85 is the correct version for my GT-I9100...
Click to expand...
Click to collapse
It wouldn't hurt to try then, would it?
Believe me when I say this, but a lot of members have reported this issue before, which led to the creation of the above guide. And its instructions are based to an extent on the successes reported by some members. So try all you can and see what happens! :good:
I've tried to figure it out to what extend different ODIN versions will give different results. Here's what i've been encountered with:
v1.3:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Check MD5.. Do not unplug the cable..
<ID:0/007> Please wait..
<ID:0/007> Checking MD5 finished Sucessfully..
<ID:0/007> Leave CS..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.83:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.img
got stuck at cache.img
v1.85:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
same sh!t here
v3.04:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
what a surprise!
v3.06:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
failed for any reason
v3.07:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
it doesn't get any better
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
i.am.dirt said:
Seriously what is going on with that device?
Seems like it doesn't matter which ODIN version i use... the results are poor.
Any suggestions?
Click to expand...
Click to collapse
Keep trying out everything in that guide and in every possible combinations you can, until you're absolutely sure that your phone's NAND is borked. Then take it to a Service Centre.
Flash a packaged ROM (modem, code & csc) with the 3.06 version.
Sent from...this is not even my S2
i91000 brick at cache
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
milo_sc said:
Any ideas for this thread ? I have a simmilar problem, my i9100 can't flash any software any kernel ?
Click to expand...
Click to collapse
i have same problem with my s2. did you fix it ? please reply fast
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
NickSaul said:
Same issue. Was this ever resolved? I can't even get the tablet to stay powered off now!
Click to expand...
Click to collapse
Has anyone tried gastonw's advice yet?
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
justb2 said:
I was having the exact problem described in the original post on my Galaxy Note Pro 12.2 (SM-P900 wifi). I was able to fix my device by flashing TWRP through Odin. This allowed me to reboot my device as normal.
After I was able to boot back into my device, I went into developer options and realized that USB Debugging was NOT enabled. I ticked the box and reset back into Download mode. This time, the Odin flash went smoothly and quickly and I now have a rooted Note Pro 12.2.
So for those of you who are having Odin fail at flashing cache.img, try my solution and let me know if it works.
#1. Download TWRP (I got mind from the official TWRP website)
#2. Flash TWRP through Odin in the same method that you flashed CF Auto Root
#3. Boot into your device normally and open Developer Options in the Settings Menu
#4. Enable USB Debugging
#5. Connect your tablet to your PC
#6. A pop-up window will arise on your tablet asking to Allow the connected computer to debug your tablet; tap OK to Allow it
#7. Reboot into download mode
#8. Reflash CF Auto Root using Odin
These steps worked for me so hopefully they can help someone else out as well
Click to expand...
Click to collapse
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
CryserCore said:
Thx! good answer for unbricking my phone but... still get the same error with enabled debugging mode
Click to expand...
Click to collapse
I have the same problem with my s3 neo! I tried to root my phone with Odin , and phone now is bricked. Firat i have installed TWRP , und everything was fine. Than , i tried to flasch superuser to get my phone rooted. Now i can´t reach TWRP (??) , and only thing that i can do ist download mode.
I am tryin to flasch stock firmware through Odin, but ever the same - cache.img error! Help please!
Hi
Please anyone help me
I am also having the same error. It stucks at cache.img. I am trying I9100XWLPT_I9100XXLQ6_I9100XEULPA_HOME.tar.md5 downloaded from sammobile.com
My model is GT-I9100 .
Can anyone help please ?
Earlier , i was having cm-12.1-20151116-SNAPSHOT-YOG7DAO1JN-i9100.zip and one day, it all gone bad. I can only use Odin mode.
I cannot even go to Recovery mode.
I tried boot.bin alone and that runs fine and it shows me Samsung logo screen.
I then tried renaming cache.img to cache.img.tar and that also runs fine .
But overall, it does not run when i think it tries to write to Nand or whatever.
I have tried all version of odin and various cables as well.
Any help will be hugely appreciated.
best regards
I had the same problem.....resolved it by extracting the tar.md5 file to the c:/ directly instead of the desktop...
Yo.
Had the same issue on the GT-I9506.
The issue occurred for me after I had accidentally attempted to flash an auto-root file to bootloader in ODIN, can confirm that flashing CWMR as through PDA solved my issue, as I was then able to flash the same auto-root file direct through PDA.
Hope this helps somebody, as I wasted an hour ****ing around trying to figure out how to fix. ^^
"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
2-DOWNLOAD ODIN FROM BELOW LINK & EXTRACT IT ON YOUR DESKTOP
http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
3-Download and Install Moborobo PC Suite from below link It will install Drivers for your phone
http://www.moborobo.com/products/moborobo.html
OR
YOU CAN DOWNLOAD & INSTALL USB DRIVER DIRECTLY FROM BELOW LINK
http://downloadcenter.samsung.com/c...Driver_for_Mobile_Phones_v1.5.23.0-retail.exe
4-NOW FOLLOW BELOW ACTIONS:
1).FIRST CONNECT THE PHONE TO PC IN DOWNLOAD MODE:-
PROCESS FOR DOWNLOAD MODE WRITTEN BELOW
SWITCH OFF YOUR PHONE & PRESS VOLUME DOWN + HOME + POWER TOGETHER YOU LL GET A SCREEN SHOWING WARNING NOW PRESS VOLUME UP IT WILL SHOW YOUR PHONE IS IN DOWNLOADING MODE.
2).THEN OPEN THE ODIN AND YOU LL SEE ID;COM COLOR IN BLUE (IT MEANS PHONE IS CONNECTED).
3).SELECT PDA AND GO TO DESKTOP WHERE YOU HAVE EXTRCTED THAT STOCK FIRMWARE SELECT IT - WAIT FOR CHECKING MD5 TO BE FINISHED CLICK ON START N WAIT FOR 5 MINUTES PHONE WILL BE REBOOT.
DONE YOU HAVE SUCCEFULLY FLASHED STOCK FIRMWARE ON YOUR SAMSUNG GT-S5282.
dashingdwivedi said:
"GUIDE FOR FLASHING STOCK FIRMWARE"
1-DOWNLOAD STOCK FIRMWARE FROM BELOW LINK (TOTAL 498MB FILE) & EXTRACT IT ON YOUR DESKTOP.
https://docs.google.com/file/d/0B5ETeurHSoZNNUtUaEFXYTBObFU/edit?pli=1
Click to expand...
Click to collapse
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?
Hmmm u can flash other countey s frmware too ... ..nd can select language in setup .....
Its india s frmware.....
Sent from my GT-S5282 using xda premium
Nice work
AdibSul said:
Thank you for your work, Does it support arabic language as a main language? and is this firmware specific for a country? i mean if i flash it will i have a problem with my network?
Click to expand...
Click to collapse
It has saved my phone many times . Thanx bro for ur easy guide.
My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?
Wipe user data and cache and then try it
ordinary_laks said:
My phone is from Indonesia. When I flashed this ROM, it ended up with boot loop. Any suggestion?
Click to expand...
Click to collapse
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country
works like a charm! thanks!
rahulsinghal said:
Wipe user data and cache and then try it. Hope it helps. If it doesnt help then try firmware of your country
Click to expand...
Click to collapse
Hit like button is better than commentinf
Sent from my GT-S5282 using Tapatalk
this is odex or deodex!!!
spidys02 said:
this is odex or deodex!!!
Click to expand...
Click to collapse
Odexed
Remember by name Rahul Singhal , thats enough for me
Odexed dude.
Sent from my GT-S5282 using xda app-developers app
My phone is keep booting will it work for me??
Flashed successfuly but net connection is not turning on
What to do?? Plzz help
stock firmware download
Sir GOOD DAY. can you help me. i downloaded ur stock firmware for 4times and its always says unconfirmed network error. does it mean that the file is no longer there?. thanks a lot.
Flashing Stock Firmware on S5282
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad
Need Help!!!!
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help
try to flash the stock rom again before doing reset ur device..... it will work
by the way from past two years m not using it anymore
atulsaini_22 said:
@dashingdwivedi
i did all the steps as mentioned, once phone rebooted, it has attached error, it's in "Factory Mode", dont know how to remove this, also IMEI no is 0000000000000000, Power button is not working.
Please help
Click to expand...
Click to collapse
for this issue you can flash pre_rooted_stock firmware provided by @Chirtagh ....it has happend to me also so flashed @Chirtagh's prerooted firmware...
tpsonwani said:
Dear Dwivedi,
I tried to flash stock firmware on GT-S5282, by following exactly the steps suggested by you. However I did not succeed as ODIN stuck at "<ID:0/010> NAND Write Start!!" for hours together. I tried the procedure with ODIN 3.09 and 3.10 with different compatible stock ROM but ended with same result. Messages as displayed in the status box of ODIN are as under:
Odin 3.07
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXAMEA_S5282ODDAME5_S5282DDAME2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Odin 3.09
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5282XXANA2_S5282ODDANA1_S5282DDAMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> SPRDDSP.img
<ID:0/010> NAND Write Start!!
Will be thankful you if you could kindly suggest some way out in this regard. In fact the handset could not be upgraded through KIES and the display now stuck at " try emergency recovery through KIES" with yellow triangle above.
Thanks,
T. Prasad
Click to expand...
Click to collapse
great. I really need it for my dad's phone.
very very good man very thx
Sorry, currently a new member but being the noob I am- it seems I flashed my International I9300 to a different device (SGH-I747)...
My device is stuck on the Samsung start-up (no biggie), and I believe it's soft-bricked but currently I have no idea what to do.
I've been on Odin and followed many guides to get it back to stock but to no avail. It all fails. I believe something with the MTP failing to install is also a problem. I've done the CMD command and went into regedit and a number of other things.
Right now Kies can't even do an Emergency Firmware Recovery won't pick it up.
Also when I get it in Recovery Mode it exits out and turns to a black screen after a couple of seconds.
I follow this : http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
As the PIT seems to PASS but from there all the other PDA's I try to start fail.
---
I can get it into Odin Mode.
And currently has
Product Name : SGH-I747
Custom Binary Download: Yes (7 counts)
Current Binary : Custom
System Status : Official
QualComm SecureBoot: Enable
---
Help would be much appreciated.
How did this occur? Well actually, I just did a Factory Reset when it worked and then it got stuck loading for hours... Then tried to flash something in... Apparently got the wrong one. And here I am.
simonheros said:
Sorry, currently a new member but being the noob I am- it seems I flashed my International I9300 to a different device (SGH-I747)...
My device is stuck on the Samsung start-up (no biggie), and I believe it's soft-bricked but currently I have no idea what to do.
I've been on Odin and followed many guides to get it back to stock but to no avail. It all fails. I believe something with the MTP failing to install is also a problem. I've done the CMD command and went into regedit and a number of other things.
Right now Kies can't even do an Emergency Firmware Recovery won't pick it up.
Also when I get it in Recovery Mode it exits out and turns to a black screen after a couple of seconds.
I follow this : http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
As the PIT seems to PASS but from there all the other PDA's I try to start fail.
---
I can get it into Odin Mode.
And currently has
Product Name : SGH-I747
Custom Binary Download: Yes (7 counts)
Current Binary : Custom
System Status : Official
QualComm SecureBoot: Enable
---
Help would be much appreciated.
How did this occur? Well actually, I just did a Factory Reset when it worked and then it got stuck loading for hours... Then tried to flash something in... Apparently got the wrong one. And here I am.
Click to expand...
Click to collapse
it seems I flashed my International I9300 to a different device (SGH-I747)??? what does this mean? flashed SGH-I747 firmware in I9300? just want to make sure that what i understood is right because your post is making some confusion..
Can you tell me if your device is 16GB or 32GB or 64GB? pit file for all three of them is different. if you will use correct one than this should not fail.. i dont think that mtp has to do anything with odin but if it does than uninstall all the drivers that are currently install(your device drivers) and download and install samsung drivers from here: http://www.mediafire.com/?7iy79emc0bf1fb4 and then try to connect the device again.. I hope this helps you..
suyash1629 said:
it seems I flashed my International I9300 to a different device (SGH-I747)??? what does this mean? flashed SGH-I747 firmware in I9300? just want to make sure that what i understood is right because your post is making some confusion..
Can you tell me if your device is 16GB or 32GB or 64GB? pit file for all three of them is different. if you will use correct one than this should not fail.. i dont think that mtp has to do anything with odin but if it does than uninstall all the drivers that are currently install(your device drivers) and download and install samsung drivers from here: ----------- and then try to connect the device again.. I hope this helps you..
Click to expand...
Click to collapse
Thank you for the response.
Yes I flashed I747 firmware in I9300. I apologize for the poor wording. My device is 16 GB. The one from the thread I linked is said to be used by 16 GB variant, so I believe it works. (Passes)
I don't get that MTP driver error anymore, but now when I try to put a Bootloader in it says that it's an unsupported dev type.
A person got a similar problem here : s3forums.com/forum/galaxy-s3-help/5772-stuck-download-mode-diffrent-device-type-9300-sgh-i747 ( can't post link) but it appears to be bricked flat out...
simonheros said:
Sorry, currently a new member but being the noob I am- it seems I flashed my International I9300 to a different device (SGH-I747)...
My device is stuck on the Samsung start-up (no biggie), and I believe it's soft-bricked but currently I have no idea what to do.
I've been on Odin and followed many guides to get it back to stock but to no avail. It all fails. I believe something with the MTP failing to install is also a problem. I've done the CMD command and went into regedit and a number of other things.
Right now Kies can't even do an Emergency Firmware Recovery won't pick it up.
Also when I get it in Recovery Mode it exits out and turns to a black screen after a couple of seconds.
I follow this : http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
As the PIT seems to PASS but from there all the other PDA's I try to start fail.
---
I can get it into Odin Mode.
And currently has
Product Name : SGH-I747
Custom Binary Download: Yes (7 counts)
Current Binary : Custom
System Status : Official
QualComm SecureBoot: Enable
---
Help would be much appreciated.
How did this occur? Well actually, I just did a Factory Reset when it worked and then it got stuck loading for hours... Then tried to flash something in... Apparently got the wrong one. And here I am.
Click to expand...
Click to collapse
I think mate you should check if your bootloader in locked or unlocked. As you mention above about QualComm Secure boot :Enable. may be before you was using gt-i9300 firmware it must be unlocked but after you flashed wrong firmware may be your bootloader got locked.
try to download complete stock 4.3 firmware from sammobile.com for correct variant i.e GT-I9300.
Download it and extract it and you will get .tar files
download latest Odin ( google it ) and open it.
put your phone in download mode by pressing volume down + home key + power key for few deconds until download mode screen appear.
press volume up key to goto download mode. connect your phone to your computer and wait till it install all the necessary driver. if you drivers are not installed properly then you have to manually installe the driver for your phone. download galaxy toolkit for s3 from xda and install it. search for the folder name galaxy toolkit in your computer. basically it will be in c:/ drive. open that folder and you will find driver folder under it. Inside the driver folder there will .exe file of driver. but before installing disconnect your phone computer and then install the driver. after the installation of your driver plug in again and wait till it install all the drivers.
Inside odin you must have to see that there is COM ID in 1st box and below it is written attached. if you dont see that then your driver are not installed correctly. uninstall and install it again.
after the driver install click on AP and select the AP .tar file that we extracted after downloading. select the appropriate file associated with it.
click on start and wait few minutes till the process gets complete.
If all things goes right you may get your phone back again.
Mustakim_456 said:
I think mate you should check if your bootloader in locked or unlocked. As you mention above about QualComm Secure boot :Enable. may be before you was using gt-i9300 firmware it must be unlocked but after you flashed wrong firmware may be your bootloader got locked.
try to download complete stock 4.3 firmware from sammobile.com for correct variant i.e GT-I9300.
Download it and extract it and you will get .tar files
download latest Odin ( google it ) and open it.
put your phone in download mode by pressing volume down + home key + power key for few deconds until download mode screen appear.
press volume up key to goto download mode. connect your phone to your computer and wait till it install all the necessary driver. if you drivers are not installed properly then you have to manually installe the driver for your phone. download galaxy toolkit for s3 from xda and install it. search for the folder name galaxy toolkit in your computer. basically it will be in c:/ drive. open that folder and you will find driver folder under it. Inside the driver folder there will .exe file of driver. but before installing disconnect your phone computer and then install the driver. after the installation of your driver plug in again and wait till it install all the drivers.
Inside odin you must have to see that there is COM ID in 1st box and below it is written attached. if you dont see that then your driver are not installed correctly. uninstall and install it again.
after the driver install click on AP and select the AP .tar file that we extracted after downloading. select the appropriate file associated with it.
click on start and wait few minutes till the process gets complete.
If all things goes right you may get your phone back again.
Click to expand...
Click to collapse
Thank you for the response.
Drivers work and it's been able to connect to ODIN but it fails regardless of the stock firmware I flash via PDA.
I get this :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For Bootloader
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
----
It would help to mention that I have a second i9300 that works and hasn't been touched or anything. Can I do something with that?
edit* It says unsupported dev type on my screen when it fails..
simonheros said:
Thank you for the response.
Drivers work and it's been able to connect to ODIN but it fails regardless of the stock firmware I flash via PDA.
I get this :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For Bootloader
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
----
It would help to mention that I have a second i9300 that works and hasn't been touched or anything. Can I do something with that?
edit* It says unsupported dev type on my screen when it fails..
Click to expand...
Click to collapse
Looks like your Nand maybe corrupt try flashing the rescue firmware >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
tallman43 said:
Looks like your Nand maybe corrupt try flashing the rescue firmware >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
SECURE CHECK FAIL : PIT
Unsupport: dev_type
---
None of the PIT's work now... And pretty much none of the files passed... D:
simonheros said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
SECURE CHECK FAIL : PIT
Unsupport: dev_type
---
None of the PIT's work now... And pretty much none of the files passed... D:
Click to expand...
Click to collapse
Any progress??
suyash1629 said:
Any progress??
Click to expand...
Click to collapse
None what so-ever. I hit a dead end and had to get a replacement.
I'm just not going to mess with the new one anymore...
I'm trying to install Philz Touch or TWRP on my Galaxy S3(GT-i9300) using Odin(I have tried using Odin 1.85, 3.09, 3.10.7, and 1.3)
I'am using the motherboard's USB ports.
But everytime it stops at the "Get PIT for mapping.." step...
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
Click to expand...
Click to collapse
(That log above is from Odin 1.85)
Can anyone help me? I'm trying to do this for weeks...
Thanks in advance.