Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Rempit said:
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
what steps did you do prior to flashing with odin. ?
Did you wipe chache and davik chache ?
did you do a reset/data format ?
flash your file with odin.
if these to steps did not work.
You need to go into recovery do a complete format of your internal sd, then flash with odin. it will work then.
saywhatt said:
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
Click to expand...
Click to collapse
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Rempit said:
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Click to expand...
Click to collapse
You can use the steps, but instead use another file from sammobile.com
Sent from my GT-I9300 using xda premium
Related
Need to return for warranty issue, used triangle away & reset counter
Downloaded stock rom from SamMobile
(I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5)
UK BTU I9300XXALF2 I9300OXAALF2 I9300XXLF2
Following the video here
[VIDEO]How to Root & Install CWM Recovery/How to Unroot and Get back the Warranty
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1715822&highlight=warranty
Did a full wipe, wiped cache partition, wiped dalvek partition etc
Running Odin3 v1.85
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Seem to be getting nowhere, can somebody tell me what I am doing wrong, my phone is still displaying
Downloading
Do not turn off target
By the way I am in Ireland and the stock rom I downloaded seems to be the correct one, im a relative newbie by the way
Stock Rom LF2 posted here certainly works .
http://forum.xda-developers.com/showthread.php?t=1646610
Try that you may have a bad download from sammmy .
jje
http://www.hotfile.com/dl/159515882/30b51b3/I9300XXALF2_I9300OXAALF2_BTU.zip.html
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Thats the same source as the file I originally downloaded but thanks anyway, had an idea I was using the wrong lead from the PC to the phone, switched it is working as we speak, rebooted and now going to do a factory reset, ill let you know how it goes JJEgan, thought the phone may have bricked, phew
All ok now, everything working, thanks for ur input JJ....appreciate very much
I see Odin3 v3.04 is newer than the Odin3 v1.85 I was using so I downloaded this
Odin sometimes has issues and simply does not flash. Restart it, reconnect the phone and everything is fine
Hello, I've recently had a problem updating my S2 GT-I9100.
I'm pretty noob at this and I need your help.
My S2 is currently having the "orange triangle" problem, and I was wondering how to fix it.
I would also like to clarify, when getting the orange triangle with debugging mode on, is it called a softbrick?
If so, i've been trying to follow this guide:
http://forum.xda-developers.com/showthread.php?t=1457458
I followed the GINGERBREAD guide because that is what my phone is.
But whenever I try, Odin gets stuck at boot.bin or just fail.
Code:
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I put all 3 files into the PDA, PHONE and MODEM.
Also, the Kernel for that part of the guide doesn't work.
(Corrupted) If you can, please supply me with another one.
Thanks.
Flash ICS, CF-Root then get rid of triangle using Triangle Away app.
Alright, thanks for the reply.
I'll do it when I get back home.
Fingers crossed :>
EDIT: Can I please have the links so I can download them?
neerajganga was so kind enough to spend approx 3 hours to help me fix softbrick, flash ics and rom.
Thank you so much, it was fun talking to you.
Gave you a reward :>
(I hope it's special)
I bricked my i9100m. Please help!!
So, I was fooling around with flashing a modem in Odin and it failed. My phone ended up saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when I try to go into recovery mode.
I can get into download mode, but when I tried to flash stock firmwares each one failed. I did flash multiple different kernels too. They get rid of the message above, but then it's stuck in boot screen with a yellow triangle.
I was running the leaked 4.1.2 official rom rooted and deodexed before I bricked it. My phone is a Bell Mobility phone from Canada Model i9100M.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't knwo what else to try. Please help. I just want my phone to work again.
UPDATE!
I fixed it. For some reason the same process worked on my laptop and not my desktop.
T12UNK5 said:
I bricked my i9100m. Please help!!
So, I was fooling around with flashing a modem in Odin and it failed. My phone ended up saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when I try to go into recovery mode.
I can get into download mode, but when I tried to flash stock firmwares each one failed. I did flash multiple different kernels too. They get rid of the message above, but then it's stuck in boot screen with a yellow triangle.
I was running the leaked 4.1.2 official rom rooted and deodexed before I bricked it. My phone is a Bell Mobility phone from Canada Model i9100M.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't knwo what else to try. Please help. I just want my phone to work again.
Click to expand...
Click to collapse
Your device was never "bricked".
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Samsung Galaxy 3 Tmobile edition. d2tmo. I am running cyanogenmod 12.(something) and I cant connect to wifi. I cant seem to flash any non lollipop rom, with both twrp and clockwork mod. So I decided Im going to go back to factory settings. So using odin I downloaded the stock firmware and tried to flash it. Odin gives me this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVALEM_T999TMBALEM_T999UVALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
I have not been able to flash anything with odin and I suspect there is something in the phone rolling back and changes odin does. I really would like to get this phone working (current rom works but cant connect to wifi). Ive used guides like this one and I have not had any luck so far.