Need to return for warranty issue, used triangle away & reset counter
Downloaded stock rom from SamMobile
(I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5)
UK BTU I9300XXALF2 I9300OXAALF2 I9300XXLF2
Following the video here
[VIDEO]How to Root & Install CWM Recovery/How to Unroot and Get back the Warranty
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1715822&highlight=warranty
Did a full wipe, wiped cache partition, wiped dalvek partition etc
Running Odin3 v1.85
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Seem to be getting nowhere, can somebody tell me what I am doing wrong, my phone is still displaying
Downloading
Do not turn off target
By the way I am in Ireland and the stock rom I downloaded seems to be the correct one, im a relative newbie by the way
Stock Rom LF2 posted here certainly works .
http://forum.xda-developers.com/showthread.php?t=1646610
Try that you may have a bad download from sammmy .
jje
http://www.hotfile.com/dl/159515882/30b51b3/I9300XXALF2_I9300OXAALF2_BTU.zip.html
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Thats the same source as the file I originally downloaded but thanks anyway, had an idea I was using the wrong lead from the PC to the phone, switched it is working as we speak, rebooted and now going to do a factory reset, ill let you know how it goes JJEgan, thought the phone may have bricked, phew
All ok now, everything working, thanks for ur input JJ....appreciate very much
I see Odin3 v3.04 is newer than the Odin3 v1.85 I was using so I downloaded this
Odin sometimes has issues and simply does not flash. Restart it, reconnect the phone and everything is fine
Related
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Rempit said:
Good day fellas,
I sold my S advance and get S2,
my friend 'updated' to 4.0.3 and it sucks and sofa king slow.
I tried to revert back to GB 2.3.6 but failed.
I use Odin and download files from internet.
still nothing works, I cant even reset to 4.0.3
I just want to use my phone now.
doesnt matter what it takes GB or ICS or custom ROM
the phone still can go to download mode, but could not boot for now
I guess I already screw the OS.
Please need advise from you guy,
now being very sad cannot use my phone
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9100XWKK5_CL754841_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI4_REV_02_CL1065910.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
what steps did you do prior to flashing with odin. ?
Did you wipe chache and davik chache ?
did you do a reset/data format ?
flash your file with odin.
if these to steps did not work.
You need to go into recovery do a complete format of your internal sd, then flash with odin. it will work then.
saywhatt said:
please follow these steps here http://androidflip.com/how-to-install-flash-firmware-on-samsung-galaxy-s-2-gt-i9100/
Click to expand...
Click to collapse
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Rempit said:
I did follow all the step before. but it does not seems to work. btw, the link to those files inside the guide has been removed by hotfiles
Click to expand...
Click to collapse
You can use the steps, but instead use another file from sammobile.com
Sent from my GT-I9300 using xda premium
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
loveshakeh said:
I own Galaxy s2 white actually i gave to my little brother and the fone is in a mess
fone is running when i am turning it on it is saying firmware upgrade encountered an issue please select recovry mode in kies and try again
I have searched in this forum already but didnt found a working way
i already tried flashing stock firmware with odin but no luck in it
first i downloaded gingerbread firmware belonging to region Pakistan PK
when i tried on odin operation stucks at cache.img
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I then tried with the ICS firmware for Pakistan but no luck and it stucks at hidden.img
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> param.lfs
<ID:0/008> NAND Write Start!!
<ID:0/008> hidden.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
I have already killed background tasks like kies air and kies itself
other things i get in recovery mood are
ODIN MODE
PRODUCT NAME GT-I9100
CUSTON BINARY DOWNLOAD : YES (28 COUNTS )
CURRENT BINARY : CUSTOM
I have already tried re installing odin 1.85
i have original USB cable provided by samsung
I dont know what was the previous version on it
Helppppppppp
Click to expand...
Click to collapse
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
it gives this error in both roms :/
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
testadeferro said:
Try with odin 3.07 and after flash enter recovery mode and do a factory reset if odinf finishes and don´t tick nothing in odin.
Click to expand...
Click to collapse
i again tried it gives cache error again
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> I9100JPLPH_I9100OJPLPF_I9100XXLQ6_HOME.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100JPKJ2_I9100OJPKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
Your phone boots?
testadeferro said:
Your phone boots?
Click to expand...
Click to collapse
when i press power button on it say firmware encountered an error bla bla stuff
when i press power + volume up + menu button nothing happens
when i press power + volume down+ menu button odin recovery mode appears with andriod little green robot downloading do not turn off target
above that its written product name : gt i9100 , custom binary download 28 counts and current binary = custom
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
testadeferro said:
Sent you a PM
---------- Post added at 08:11 PM ---------- Previous post was at 07:54 PM ----------
dis you try this?
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i followed the steps from the thread link u given didnt worked but the custom binary changes from custom to samsung
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi XDA.
I've been trying to search for solutions to my problem, but I really can't seem to find any. If a thread similar to mine exists already, I am sorry.
Today i tried flashing a LiquidSmooth 4.4.4 ROM to my device, but the install of the ROM gives an error (Status 7). Now the phone is stuck in a bootloop.
Now I am trying to flash stock ROM with Odin 3.07 but none of the .tar-files I've been trying will work. I have also tried to install TWRP Recovery through ODIN just now, but it fails every time. I can't seem to figure out what to do now.
Hope you guys can help me. Thanks in advance!
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: When I try to boot up the device just with the power button it now shows white static noise all over the screen. I am in a panic right now, as I don't have the money to buy a new phone. I am afraid I have stupidly installed some kind of bootchain made for a Verizon S3 instead of the International version like mine.
EmilBakke said:
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
tallman43 said:
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
Click to expand...
Click to collapse
Well I surely am an idiot. Thank you so much, it works fine now! Have a nice day.
I've followed the super easy instructions on how to use CF Auto Root but still cannot make it all the way through the first part of the root process. It starts running fine and then stops at NAND Write Start. At one point it got past that but failed at again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Earlier it said something about the PIT partition, but I can't seem to find a 32GB pit file for the Sprint S5 - and it's not saying that any more. I am kind of at a loss here, and now my phone won't boot at all. What else can I do?
Thanks!
Try a different computer, seriously man. I had the same issue. Had to use my dinosaur Windows XP Setup for it to work.