I changed my CID according the directions in this thread in order to switch to S-OFF and update my firmware.
My phone now prompts me to activate it every time I turn it on, but when the call is made I get something along the lines of "The number or code you have dialed is incorrect..." and the process fails. I can't make or receive calls until I do this. I appreciate the help.
Let hands free activation finish or call sprint and have them provision it again this happens to a lot of folks after getting S-OFF
bigdaddy619 said:
Let hands free activation finish or call sprint and have them provision it again this happens to a lot of folks after getting S-OFF
Click to expand...
Click to collapse
My problem is that hands-free activation isn't working or doesn't appear to be working at all.
I tried calling customer service and they gave me a 6-digit programming code (053448) and an MSID to manually program my phone, but when I dial ##053448# I get the usual message about my phone not being activated.
The ROM I'm using is CM10.1, is there some way do this from within the phone settings?
sphaugh said:
My problem is that hands-free activation isn't working or doesn't appear to be working at all.
I tried calling customer service and they gave me a 6-digit programming code (053448) and an MSID to manually program my phone, but when I dial ##053448# I get the usual message about my phone not being activated.
The ROM I'm using is CM10.1, is there some way do this from within the phone settings?
Click to expand...
Click to collapse
You need to be running a Sense ROM to activate your phone, update PRL or profile, or use dialer codes.
Sent from my EVO using xda premium
FinZ28 said:
You need to be running a Sense ROM to activate your phone, update PRL or profile, or use dialer codes.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Well there's my problem. Thanks!
Any suggestions as to which Sense ROM I might install? I've tried a few with no luck.
sphaugh said:
Any suggestions as to which Sense ROM I might install? I've tried a few with no luck.
Click to expand...
Click to collapse
Try MeanBean.
Sent from my EVO using xda premium
MeanBean
FinZ28 said:
Try MeanBean.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
^ I'm running this one since I got S-OFF. I was one of the ones that had to reactivate my phone after I gained S-OFF so now I'm going to CM 10.1
Related
Yes, my Amaze is rooted.
Yes, I flashed xboarder's update and kernal.
Yes, I've used the forum search and found a couple people posting about this error but nobody has posted a follow up.
No, I don't want to be flamed so pardon my ignorance if somehow I missed an obvious answer.
Perhaps its a problem with my router and if so does anybody have a hint? I don't really need wifi calling but I hate not having anything work.
and yes, I'm pretty sure I've abused the smiles. PS. Coming from HD2 and loving the Amaze thanks to all the hard work from the XDA community.
You said you read around and saw some problems, but you never said if you saw the new sim card issue and if you're using the new one. You have to use it. If you are, you could be getting the 911 address error, but that one tells you to go to my.tmobile.com to fix it. So using the new sim card is the next troubleshooting step...
Sent from my HTC Amaze 4G using XDA App
Yes, I have the new sim card and 911 address is set
Sent from my HTC_Amaze_4G using XDA App
alrosal said:
Yes, I have the new sim card and 911 address is set
Sent from my HTC_Amaze_4G using XDA App
Click to expand...
Click to collapse
Sorry, that was my only suggestion... Seems like you've done everything, maybe try calling customer support and figuring out exactly what the error code is for. Sorry I couldn't help, good luck!
Sent from my HTC Amaze 4G using XDA App
Thanks. I appreciate the effort. Really any response is welcomed. I'm going to flash the faux kernel and hope for best
Sent from my HTC_Amaze_4G using XDA App
i have the same problem...would love to know a fix...if it even exists.
i've talked to t-mobile customer service for hours trying to resolve and still no resolution.
i get the 911 address missing error, but it's on my profile and t-mobile reps even confirmed that it's in their system.
every once in awhile, wifi calling icon will turn blue and show that i'm able to make wifi calls...but then after a couple seconds, it'll go right back to the error message.
This may have no impact at all, buy have you reflashed the kernel? I reflashed the kernel and it resolved a WiFi issue. You can try it. I hope it works!
Okay, it toook me all night mostly because I am a big ass noob but I flashed quicksence and the kernal again and it resolved the issue. The reason it took so long was because I tried to start from scratch and go all the way back to stock. Big mistake. HTCDev is down and will not issue a new unlock key. Not a bad thing unless you already ran the relocker which I did. luckily I found my old unlock code and was able to unlock the bootloader again and here I am. I think I may have had a bad flash before but now its golden. Xboarder and Binary rock.
im having the same problem at home with stock everything
Just call them and ask to add wifi calling feature to your line.
Sent from my HTC Amaze 4G using xda premium
cndctrdj said:
im having the same problem at home with stock everything
Click to expand...
Click to collapse
Are you having the same error code though?
is there a way to put this phone.apk onto an ICS rom? im on cricket wireless and the voicemail doesnt work native for the rom im on. its the MIK zrd3 rom.
http://forum.xda-developers.com/showthread.php?t=1467511
+100
I'm on cricket as well, what do you mean native voice mail doesn't work? Is it set up with your phone number in the phone settings? I've always just used Google Voice, way better IMHO.
I mean when I person leaves a voicemail it doesn't leave a icon at top. I just gotta call my voicemail every now and then to make sure there isn't one.
Sent from my Evo 3D using xda premium
Oh, ok. yeah I've always used GV. Have you tried pushing that phone.apk to system and reboot? Does it work?
yea i did a nandroid and pushed it. when i rebooted the phone process just kept giving me FC and it was so unusable that i had to go back to my backup. i know it dont work now..lol.
Yeah for awhile I just thought no one was leaving me voicemails till one day I called just to check and my voicemail was full...lol. when you pushed it did you sweet the permissions to rw-r-r?
jtheis23 said:
Yeah for awhile I just thought no one was leaving me voicemails till one day I called just to check and my voicemail was full...lol. when you pushed it did you sweet the permissions to rw-r-r?
Click to expand...
Click to collapse
my file manager auto makes the system rw-r-r..its an option. so yes it does get the permission it needs to write over.
I know you probably want to use the native voicemail, but take a gander at this. Later today I will try and see what is going on with the phone.apk. Can't guarantee anything, but at least take a look at GV, its is awesome.
netwokz said:
I know you probably want to use the native voicemail, but take a gander at this. Later today I will try and see what is going on with the phone.apk. Can't guarantee anything, but at least take a look at GV, its is awesome.
Click to expand...
Click to collapse
yea I used it before but I have my data set to turn off when I don't use it. I've tried it before but gv didn't work to well for me.
Sent from my Evo 3d using Xda Premium
Ok, well I'll try to take a look at a logcat for the phone.apk after work. I can't promise anything, but who knows.
netwokz said:
Ok, well I'll try to take a look at a logcat for the phone.apk after work. I can't promise anything, but who knows.
Click to expand...
Click to collapse
i appreciate it
NP, can you tell me what ROM/version you are on? Or link to it please? Internet is much faster at work than home...
netwokz said:
NP, can you tell me what ROM/version you are on? Or link to it please? Internet is much faster at work than home...
Click to expand...
Click to collapse
im on this rom(v2.0)
http://forum.xda-developers.com/showthread.php?t=1641115
im on hboot 1.4
clockwork mod touch recovery
if any of that helps.
t12icky0 said:
im on this rom(v2.0)
http://forum.xda-developers.com/showthread.php?t=1641115
im on hboot 1.4
clockwork mod touch recovery
if any of that helps.
Click to expand...
Click to collapse
I'm on the same rom hope this works I just tried gv got it set up but voicemail still not receiving notification
Did you dial the correct number to set it up? Its different then what GV tells you. I've been using it for a while now, and never had any problems.
Sent from my PG86100 using Tapatalk 2
netwokz said:
Did you dial the correct number to set it up? Its different then what GV tells you. I've been using it for a while now, and never had any problems.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I used the right # even tried getting a new one stroll no go. I'll play with it later
I meant when it tells you to dial the *28XXXXXXXXXX cricket is different. You also need to make sure you have call forwarding on your plan, but most if not all do.
Sent from my PG86100 using Tapatalk 2
yea gv just never really works for me.
Sent from my Evo 3d using Xda Premium
hopefully you can get this figured out, because I am on Boost, and I have also tried to push a phone.apk that had working voicemail notifications before I upgraded to and ICS rom, and I had the same problem with force closes, and unstability.... I have tried google voice, but unfortunately at this time, GV does not support boost....
There is absolutely no support in the main thread so I decide to create my own thread. CDMA workshop is what's needed to get talk and text working, and QSPT gets data working, correct? If so, can I pay to have the phone flashed with just talk and text, and then get the data working my self or is there a certain process that's need to be done with CDMA workshop in order for QSPT to get the data working? Can anyone Enders this please?
Flashed to what? PagePlus?
Blayznaz said:
Flashed to what? PagePlus?
Click to expand...
Click to collapse
Yes
Someone made a thread with a guide here.
Purpeltendire said:
Someone made a thread with a guide here.
Click to expand...
Click to collapse
I know, but no one seems to give any help in that thread. Usually a thread like this makes me people go on endless rants, making someone want to step in and answer the question. I just need to know if I can have voice and text flashed at a store and then be able to get data working with QPST (or QSPT)
brd912 said:
I know, but no one seems to give any help in that thread. Usually a thread like this makes me people go on endless rants, making someone want to step in and answer the question. I just need to know if I can have voice and text flashed at a store and then be able to get data working with QPST (or QSPT)
Click to expand...
Click to collapse
Have you tried to manually program with CDMA WS?
The first time I tried it didn't work, and I listed my rez on Craigslist, but then, for some reason, I tried again and that time it worked. Just call up a P+ rep, and tell them you need the values for manually programming the phone.
I didn't program the data because I'm not on the monthly plans.
mvmacd said:
Have you tried to manually program with CDMA WS?
The first time I tried it didn't work, and I listed my rez on Craigslist, but then, for some reason, I tried again and that time it worked. Just call up a P+ rep, and tell them you need the values for manually programming the phone.
I didn't program the data because I'm not on the monthly plans.
Click to expand...
Click to collapse
I don't have the full version.
brd912 said:
I don't have the full version.
Click to expand...
Click to collapse
Get the full version and #profit.
Don't mean to invade, but is there a way to remove page plus back to Verizon. Im looking to buy one if I can revert back to Verizon
Sent from my ADR6400L using xda app-developers app
tburns said:
Don't mean to invade, but is there a way to remove page plus back to Verizon. Im looking to buy one if I can revert back to Verizon
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
someone correct me if I'm wrong, but I believe as soon as you pop in a verizon SIM card it will program back to verizon. but I would verify that by someone else first, probably IamTheOneTheyCallNeo or any of the rom devs would know.
mvmacd said:
someone correct me if I'm wrong, but I believe as soon as you pop in a verizon SIM card it will program back to verizon. but I would verify that by someone else first, probably IamTheOneTheyCallNeo or any of the rom devs would know.
Click to expand...
Click to collapse
That doesn't work. Tried it. Calls won't work but data does for internet. The phone will still show up with the page plus number under settings.
Sent from my ADR6400L using xda app-developers app
tburns said:
That doesn't work. Tried it. Calls won't work but data does for internet. The phone will still show up with the page plus number under settings.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
Run a stock RUU and that will restore all VZW settings.
Didnt work!
Hey guys i tried following the link showing hwo to flash. It all seemed to work. i tried making an outbound call and i just get the verizon auto system saying its not active. I thought maybe its because of the sim card. Without sim card it doesnt even try to call and says needs a sim card. Can Anyone help me out on what i might have done wrong? Text doesnt work either! I dont really care about 3g i just want to have my TandT.
I am completely stumped here. Ive been on slimbean cm10.1 Rom for a while and recently flashed viper Rom 3.1.6 and since than, all the incoming calls are going straight to voicemail without a single ring. I've tried four different sense roms and can't figure out the issue.
Going back to cm10.1 Rom fixes the issue. Can someone please help me
Sent from my EVO using xda app-developers app
Try updating your profile on a Sense ROM. Other than that you might have to go into diagnostic mode and play with the settings there.
Sent from my EVO using xda premium
Is there a particular setting I should be looking at in the diagnostics mode? Also, I can get into that mode by dialing ##3282# correct?
JManekia said:
Is there a particular setting I should be looking at in the diagnostics mode? Also, I can get into that mode by dialing ##3282# correct?
Click to expand...
Click to collapse
Diagnostic mode (##DIAG#) is for programs like qpst, DFS, and cdma workshop. There are a lot settings in there that unless you know what you are doing, and are familiar with the program, I wouldn't mess with.
You could try...
##data# (3282) select edit and enter msl
Menu>restore
After it reboots your phone may even try to re provision... Let go through the menus but you can cancel the firmware update.
Make sure to update your profile afterwards.
If this doesn't work you may have to do a hard reset (probably best anyways) but you want to make sure that you do a proper backup. Check the link in my sig, there is faq section at the bottom of post 1 that will assist you. :thumbup::thumbup:
Flowed from my Jewel using Tapatalk 2
Thanks for that suggestion. I followed you guide and performed each step, even the last step of hard reset and I still can't take calls. I just don't understand why sense rom would prevent taking phone calls while CM10.1 works without any issues.
JManekia said:
Thanks for that suggestion. I followed you guide and performed each step, even the last step of hard reset and I still can't take calls. I just don't understand why sense rom would prevent taking phone calls while CM10.1 works without any issues.
Click to expand...
Click to collapse
I would say the next step is to flash a sense rom and call Sprint from another #. Sometimes they give you a number to call to provision. If they can't help you, you will have to take it in.
Flowed from my Jewel using Tapatalk 2
gunfromsako said:
I would say the next step is to flash a sense rom and call Sprint from another #. Sometimes they give you a number to call to provision. If they can't help you, you will have to take it in.
Flowed from my Jewel using Tapatalk 2
Click to expand...
Click to collapse
Did that also, she tried for a good half an hour and couldn't fix it. Do I need to relock my phone before taking it to sprint?
Sent from my EVO using xda app-developers app
JManekia said:
Did that also, she tried for a good half an hour and couldn't fix it. Do I need to relock my phone before taking it to sprint?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Since your s off I would just run viperuu. Sprint isn't going to check your bootloader... Just if it's rooted. :thumbup:
Flowed from my Jewel using Tapatalk 2
gunfromsako said:
Since your s off I would just run viperuu. Sprint isn't going to check your bootloader... Just if it's rooted. :thumbup:
Flowed from my Jewel using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2197909
Sent from my EVO using xda premium
Hello all I was wondering if I am able to change my phone # OTA with sprint if my HTC EVO 4G LTE that is Rooted S-ON? I was going to try to do it online through the Sprint website but thought I should ask first being that I am rooted. I would hate for it not to work. Any and all comment are appreciated.
eepps4503 said:
Hello all I was wondering if I am able to change my phone # OTA with sprint if my HTC EVO 4G LTE that is Rooted S-ON? I was going to try to do it online through the Sprint website but thought I should ask first being that I am rooted. I would hate for it not to work. Any and all comment are appreciated.
Click to expand...
Click to collapse
Shouldn't matter that you're rooted. Might want to make sure that you're running a Sense ROM when you change your number.
Sent from my EVO using xda premium
Buddy of mine changed his number while running viper rom, no prob...
Sent from my EVO using xda app-developers app
FinZ28 said:
Shouldn't matter that you're rooted. Might want to make sure that you're running a Sense ROM when you change your number.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks Fin
drumwizard said:
Buddy of mine changed his number while running viper rom, no prob...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Thanks Drum! nice to know because im running Viper as well.
drumwizard said:
Buddy of mine changed his number while running viper rom, no prob...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Hey drum so i went ahead and tried to change my # completed all the steps it show my # is changed but i cant make or receive calls. it says i need to update my profile but i get an error every time i try.. As we all know sprint is no help.. is there a way to update my profile ? im guessing its because im rooted. I really dont want to have to unroot any sugestions?
eepps4503 said:
Hey drum so i went ahead and tried to change my # completed all the steps it show my # is changed but i cant make or receive calls. it says i need to update my profile but i get an error every time i try.. As we all know sprint is no help.. is there a way to update my profile ? im guessing its because im rooted. I really dont want to have to unroot any sugestions?
Click to expand...
Click to collapse
I believe all that is on sprints end, and I know sometimes it could take an hour or two before your service is restored. How long ago did you change your #?
As far as updating your profile manually, I don't know, there may be a way. But I've never had to do that, as I've had the same number since 2004...search the forum to see if there's a thread about it anywhere.
drumwizard said:
I believe all that is on sprints end, and I know sometimes it could take an hour or two before your service is restored. How long ago did you change your #?
As far as updating your profile manually, I don't know, there may be a way. But I've never had to do that, as I've had the same number since 2004...search the forum to see if there's a thread about it anywhere.
Click to expand...
Click to collapse
Its been about 5 hours still no luck ive even tried flashing to a stock rom I have data but cannot make or receive calls I can send text via google voice. sprint is absolutely no help I know what they are going to say before they say it..lol This sucks I knew deep down I shouldnt have tried it
eepps4503 said:
Its been about 5 hours still no luck ive even tried flashing to a stock rom I have data but cannot make or receive calls I can send text via google voice. sprint is absolutely no help I know what they are going to say before they say it..lol This sucks I knew deep down I shouldnt have tried it
Click to expand...
Click to collapse
Hmmm, thats weird, my boy went about an hour til he got his service back. Can you call *2? If so call and tell em you wanna talk to technical support not the regular customer service people.
Hope they can help you out.
If you're on a Sense ROM try updating your profile, otherwise Sprint needs to reprovision your service.
You can update your profile under the system updates menu.
Sent from my EVO using xda premium
FinZ28 said:
If you're on a Sense ROM try updating your profile, otherwise Sprint needs to reprovision your service.
You can update your profile under the system updates menu.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Aren't you on vacation??????
Check PM
bigdaddy619 said:
Aren't you on vacation??????
Check PM
Click to expand...
Click to collapse
I am, yes.
Doesn't mean I can't try and lend a hand to my fellow XDA'ers
Sent from my EVO using xda premium
eepps4503 said:
Its been about 5 hours still no luck ive even tried flashing to a stock rom I have data but cannot make or receive calls I can send text via google voice. sprint is absolutely no help I know what they are going to say before they say it..lol This sucks I knew deep down I shouldnt have tried it
Click to expand...
Click to collapse
You need to do a full/hard reset of your device.
*This will wipe all of your data/storage*
(doing this from memory, so the steps may not be in exact order)
1. Make a nandroid backup of your existing setup.
2. Backup all of your sdcard stuff to your computer.
3. Download msl reader and get your msl number.
4. Dial ##786# in your dialer, and enter your msl number when it asks for a password.
5. When the page loads, press menu and choose reset.
6. Once rebooted, do a profile and prl update and test your device.
7. Once verified as working, restore your nandroid and sdcard data.
8. Win.
This will wipe the provisions of your phone (as well as everything else) and reactivate your device on sprints network.
Vinchenzop said:
You need to do a full/hard reset of your device.
*This will wipe all of your data/storage*
(doing this from memory, so the steps may not be in exact order)
1. Make a nandroid backup of your existing setup.
2. Backup all of your sdcard stuff to your computer.
3. Download msl reader and get your msl number.
4. Dial ##786# in your dialer, and enter your msl number when it asks for a password.
5. When the page loads, press menu and choose reset.
6. Once rebooted, do a profile and prl update and test your device.
7. Once verified as working, restore your nandroid and sdcard data.
8. Win.
This will wipe the provisions of your phone (as well as everything else) and reactivate your device on sprints network.
Click to expand...
Click to collapse
This was my next suggestion. Thanks Vin
Sent from my EVO using xda premium
drumwizard said:
Hmmm, thats weird, my boy went about an hour til he got his service back. Can you call *2? If so call and tell em you wanna talk to technical support not the regular customer service people.
Hope they can help you out.
Click to expand...
Click to collapse
Well I figured it out the other day if anyone ever has this problem uninstall Google voice disable your account online as well. Hard reset then it should be fine. For some reason Google voice was interfered with make and receiving calls. Thanks for all the suggestions much appreciated