Related
Hey guys, today I thought I would venture into the world of custom roms. Since Samsung has failed to release an update I was planning on adding ics. I went to root device and completely wiped everything. I have managed to flash clockworkmod but have no roms on sdcard to install onto device. Now i have a tab with zero software. I have a stock 3.2 honeycomb, and the new AOKP 32. is there anyway to flash these through Odin without having them on sd card already? If not what should I do?
Please help lol.
If you can get in Odin just flash the stock rom from ( samfirmware ) and then redo the ROM installation. Hope it helps
I am completely new. I have clockworkmod on tab. thats it. I have odin on computer. How do I go about flashing that way. I am really over my head here lol. I know when i flashed clockwork it was in pda section and those were tar files. is there a way to flash a firmware without it being on sdcard already and what file do i put through odin. I realize these are simple tasks and all could have been avoided but i missed a step
What tab do you have? Wifi only?
Samsung tab 10.1 4g GT-p7500 its on Bell.
I have clockworkmod installed with nothing else but it will connect to odin
Hey guys, thanks for all the help. I found a 3.2 and flashed. What was throwing me off was the files i had were not tar or md5 but rather Rar.
Today was my first venture into android mods, i appreciate all the help. Currently running AOKP build 32 and loving it!
Don't let it discourage you, we all go thru panic moments! Have fun
Sent from my Galaxy Nexus using xda premium
Kurtie_R said:
Hey guys, thanks for all the help. I found a 3.2 and flashed. What was throwing me off was the files i had were not tar or md5 but rather Rar.
Today was my first venture into android mods, i appreciate all the help. Currently running AOKP build 32 and loving it!
Click to expand...
Click to collapse
Hi, Im having same problem! By chance do you remember where you found the file to install?
NEED HELP PLZ MY tab 2 P5100 wont turn on :
i tried flashing kernel from odin .v 3.7 .and it passed after that tab wont turn on and just showing battery sign not even charging ..when connected to charger.and can bring in download or recovery mode.
plz advice what can i do .
if i connect to computer it keeps on connecting and disconnecting .unrecongnised device
thanx
fnibras said:
i tried flashing kernel from odin .v 3.7 .and it passed after that tab wont turn on and just showing battery sign not even charging ..when connected to charger.and can bring in download or recovery mode.
plz advice what can i do .
if i connect to computer it keeps on connecting and disconnecting .unrecongnised device
thanx
Click to expand...
Click to collapse
This is the tab 10.1 section not the tab 2
purpose:
Obtain a full stock phone rooted with cwm and this mod http://forum.xda-developers.com/showthread.php?t=739530
the mod needs to be applied to a rom on the pc than flashed with cwm to work.
I wish to try both GB and ICS, actually phone has latest gb german open firmware
I found it on sammobile I9100GXXLB1_I9100GDBTKL2_DBT.zip
After days of search I understood that cwm is only available with a modded kernel and the mod needs cwm but I want original kernel.
IS possible to do what I wish or is it an impossible task?
FrankNorton said:
purpose:
Obtain a full stock phone rooted with cwm and this mod http://forum.xda-developers.com/showthread.php?t=739530
the mod needs to be applied to a rom on the pc than flashed with cwm to work.
I wish to try both GB and ICS, actually phone has latest gb german open firmware
I found it on sammobile I9100GXXLB1_I9100GDBTKL2_DBT.zip
After days of search I understood that cwm is only available with a modded kernel and the mod needs cwm but I want original kernel.
IS possible to do what I wish or is it an impossible task?
Click to expand...
Click to collapse
update:
THE GOOD
Finally decided to flash a cwm 5.0.2.8 kernel and rooted with superoneclick, all works: backup.
THE BAD
than I tried to flash the last cyanogenmod9..stuck on boot for 20min, recovery is now cwm 5.5.something.
restored the backup so now I have back 5.0.2.8 cwm. firmware works perfectly, kies does connect.
tried to flash original ics firmware with odin..stuck on setup connection! (whatever I try to flash stucks on setup connection)
is normal that odin can't connecto with cwm? problem is not pc because I tried with another one.
now I have a GB 2.3.6 rooted (kies says is up to date, german phone) but I wish to try cyanogenmod..I understand the problem is I do not have ICS bootloader..but I do not have odin connection too so I am stuck.
Guys please help me, I'm coming from an lg optimus one and really never had so many problem.
Advice to google: all that pain is to make tasker able to switch to 2G 3G, every adnroid I had I spend days of work to have that. Please stop that thing, make it available.
U need ics bootloader before flashing cm9... one way is to flash stock ics to get the ics bootloader...then flash cm9..
Sent from my GT-I9100G using xda app-developers app
U need to go to odin mode in phone then connect to pc... not in cwm mode..
Sent from my GT-I9100G using xda app-developers app
I am aware that I need ics bootloader and that I should flash ics original firmware.
how do I go in odin mode? actually I have cwm recovery and odin is stuck in "setup connection".
thanks for your support, I'm going crazy
edit:
odin mode: dolume DOWN+home+power
cwm mode: volume UP+home+power
this very stupid thing made me crazy for 2 days, I feel very stupid and also I'm still asking myself how is possible that nobody told me that.
Anyway...done.
FrankNorton said:
THE BAD
than I tried to flash the last cyanogenmod9..stuck on boot for 20min, recovery is now cwm 5.5.something.
restored the backup so now I have back 5.0.2.8 cwm. firmware works perfectly, kies does connect.
tried to flash original ics firmware with odin..stuck on setup connection! (whatever I try to flash stucks on setup connection)
is normal that odin can't connecto with cwm?
Click to expand...
Click to collapse
Stuck on setup connection, thats Problem can make a other phone Software (sony etc)
This is not a help/questions forum, its a development forum. These types of topics go into the General or Q&A sections.
See here. Moved
Guys, is there any chance of rooting the phone without flash with odin or from the mobile odin?
Serve unlock root for ICS 4.0.3?
From already thank you very much.
PS: Sorry for my English is not very good
Look at the PhilZ-CWM6 custom kernel. It can be flashed in stock recovery and includes SuperSU, root, ClockworkMod Recovery and Busybox.
It is pure stock based, and doesn't have MMC brickbug.
Thanks for responding! But there would be some way that only makes you root, without installing a modified kernel and without CWM? is that I want nothing more root access
ajen said:
Thanks for responding! But there would be some way that only makes you root, without installing a modified kernel and without CWM? is that I want nothing more root access
Click to expand...
Click to collapse
This method http://forum.xda-developers.com/showthread.php?t=1746794 doesn't flash a custom kernel, but do include CWM. Why don't you want CWM?
23732 said:
This method http://forum.xda-developers.com/showthread.php?t=1746794 doesn't flash a custom kernel, but do include CWM. Why don't you want CWM?
Click to expand...
Click to collapse
You're wrong pal, using the first method will only root your phone, no cwm nor custom kernel. its a single file u flash through stock recovery that gives you root and busybox, nothing else.
Thanks friend! Now I see it, I do not set it up yet because there is no custom rom, just want root : D
Rooting s2 i9100 (ICS 4.0.4 updated)
Hello everyone!
Can anyone guide me on how can I root my device. I update to ICS 4.0.4 via Kies and wish to install cmd 10.1!
shahrozeumar said:
Hello everyone!
Can anyone guide me on how can I root my device. I update to ICS 4.0.4 via Kies and wish to install cmd 10.1!
Click to expand...
Click to collapse
Try flashing a custom kernel through Odin on your PC. Plenty of guides on here and Google. That way you can flash cm through recovery. Keep an eye out for the kernel bug related to 4.0.4. Again lots of documentation on that too.
Sent from my GT-I9100 using xda app-developers app
Risks
MarkyG82 said:
Try flashing a custom kernel through Odin on your PC. Plenty of guides on here and Google. That way you can flash cm through recovery. Keep an eye out for the kernel bug related to 4.0.4. Again lots of documentation on that too.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks and one more thing, Is there any risk of getting my phone bricked during rooting part only? I mean we are not installing a firmware so why would the phone get bricked!
shahrozeumar said:
Thanks and one more thing, Is there any risk of getting my phone bricked during rooting part only? I mean we are not installing a firmware so why would the phone get bricked!
Click to expand...
Click to collapse
There is ALWAYS a risk when doing anything to your device. The level of risk is down to what you are doing and what state the battery is in etc.
As long at the rooted kernel you are flashing is compatible with the current firmware then all SHOULD be fine.
Sent from my GT-I9100 using xda app-developers app
ExynosExploit by chainfire can root it. Has got a dangerous tag attached to it tho.
Stuck in bootloop
Hi,
So, this is what happened
I have a galaxy SII gt-i9100, About 5 months ago I rooted it and installed the galaxy nexus update to android 4.0.4. and everything was ok except it wasn't showing me the option to transfer via blue tooth (but that didn't bother me much). These were the things I used
1. GT-I9100_ClockworkMod-Recovery_4.0.1.4
2. Odin3 v1.83
3. GT-I9100_XWKI8_insecure
4. GT-I9100_XWKI8_original
Now, yesterday I a friend had galaxy S II i9100P and he updated the firmware using kies and it had working blue tooth. I thought ok let's change it to that and my blue tooth might work also. I was at work and I (in a hurry) tried rooting it with only Odin. No backup, No Clockwork :laugh: nothing. ( and "Now it's stuck at the startup screen. I can go to download mode and recovery mode but it has samusg recovery not clockwork. I don't know what to do and in need of help. I'd really appreciate a quick response. (hoping to get atleast the mass data back )
These were the only 2 things used.
1. Odin3 v1.83
2. I9100JPLPH_I9100OJPLPF_PAK
wg_Sniper said:
Hi,
So, this is what happened
I have a galaxy SII gt-i9100, About 5 months ago I rooted it and installed the galaxy nexus update to android 4.0.4. and everything was ok except it wasn't showing me the option to transfer via blue tooth (but that didn't bother me much). These were the things I used
1. GT-I9100_ClockworkMod-Recovery_4.0.1.4
2. Odin3 v1.83
3. GT-I9100_XWKI8_insecure
4. GT-I9100_XWKI8_original
Now, yesterday I a friend had galaxy S II i9100P and he updated the firmware using kies and it had working blue tooth. I thought ok let's change it to that and my blue tooth might work also. I was at work and I (in a hurry) tried rooting it with only Odin. No backup, No Clockwork :laugh: nothing. ( and "Now it's stuck at the startup screen. I can go to download mode and recovery mode but it has samusg recovery not clockwork. I don't know what to do and in need of help. I'd really appreciate a quick response. (hoping to get atleast the mass data back )
These were the only 2 things used.
1. Odin3 v1.83
2. I9100JPLPH_I9100OJPLPF_PAK
Click to expand...
Click to collapse
ok, the galaxy nexus update? you mean Jelly Bean or Supernexus / chamaleon?
I think that you've installed a stock ROM over a custom ROM and that's why you are stucked at the logo.
read a little bit about flashing because you are up for it.
Learn about SD card data when flashing and follow a tutorial to flash stock ICS 4.0.3 via odin thru Download mode.
Also make sure to flash a safe kernel so you wont get the brick bug (see warning post sticked in the general section).
I don't know what to put here...any ideas?
fixed.Thanks
gastonw said:
ok, the galaxy nexus update? you mean Jelly Bean or Supernexus / chamaleon?
I think that you've installed a stock ROM over a custom ROM and that's why you are stucked at the logo.
read a little bit about flashing because you are up for it.
Learn about SD card data when flashing and follow a tutorial to flash stock ICS 4.0.3 via odin thru Download mode.
Also make sure to flash a safe kernel so you wont get the brick bug (see warning post sticked in the general section).
I don't know what to put here...any ideas?
Click to expand...
Click to collapse
Thanks for reply.
The thing is I was trying to save my data as I had not backed up . i flashed it and put yhe custom room again with Odin and it started working again.
cheers.
Glad to hear that. Be careful next time.
I don't know what to put here...any ideas?
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.
Hi everyone,
I gave it a shot at rooting my phone and upgrading it from android 4.0.3 to 4.2.1 (rootbox) but I failed miserably. Somewhere in between the phone got stuck at that warning yellow marker and it would only allow me to get into download mode. After trying 5-6 different firmware versions, I finally managed to get one of them to work with Odin and the phone works once again but this firmware version does not work with kies.
I have no idea what the original version was, but I can get all the details from an identical phone from the same operator if you tell me what would be needed. I know it is a silly question, but is there a way to download the firmware from another identical phone used by the same operator?
I want to either restore the phone to a firmware version of local Swiss operator or properly manage to upgrade the firmware to a light version of android so I won't have to deal anymore with all those useless default apps which start automatically and eat up the battery.
I welcome any and all advices.
Thanks in advance.
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
You can download stock from
http://www.sammobile.com/firmwares/ just search for your phone and carrier then flash back to stock.
As the previous post said did you wipe first? Try a factory reset then flash the rom.
Sent from my GT-I9100 using xda app-developers app
danskiro said:
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
Click to expand...
Click to collapse
Thanks a lot for the help. With this new firmware on I finally managed to install RootBox 3.8 with Android 4.2.2.
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
gn82 said:
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
Click to expand...
Click to collapse
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
WardenBerret said:
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
Click to expand...
Click to collapse
Thanks for the feedback. Be it basic or not, it simply does not work. I used the basic Rootbox as described in this thread.
1. No matter how much I move my fingers on the screen no menu appears
2. System settings >> Sound >> "vibrate on touch" is disabled yet the phone vibrates when I type on the screen keyboard which is really annoying to others if I am in a meeting ... I googled for about 6 hours for a solution and when I failed to find one I posted here. I am sure that the time of everyone here is quite precious I would never want to waste it.
Flash stock jb with mobile odin and that's that.
Sent from the little guy
gastonw said:
Flash stock jb with mobile odin and that's that.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot gastonw. I am now cMIUI which should be based on CM10 and even though it is based on Android 4.1.2 instead of 4.2.2 it is still running great.
Good news then
Sent from the little guy
Stuck at samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Click to expand...
Click to collapse
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
now trying to install a stock rom
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
algorithm101 said:
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
Click to expand...
Click to collapse
If you're attempting to flash a stock ROM through CWM recovery, stop now. That'll never work. The only way to flash a stock ROM is to use Odin, Mobile Odin (which in your case won't work, requires phone to boot) or Heimdall (I've never used this personally). So if you're using recovery, DON'T flash stock. You have two options to flash a ROM at present:
1) Stock ROM using Odin
2) Custom ROM using CWM recovery.
Done and working Thanks a Lot
Hopper8 said:
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
Click to expand...
Click to collapse
I flashed into stock rom XXLSJ variant. phone is working fine but lost access to root. in order to regain recovery menu i rooted my phone.
1. Now i want to backup my ROM using titanium backup. But its stuck at Gaining Root Access Screen What do i do now?
2. Stweaks,Super User and CWM have disappeared how do i get it back??
3. Strange thing Whatsapp is not working Unable to connect using my datapack
4. Can i Software update irrespective of the JB Stock ROMs region I am from.
Good job getting it working again now, time for you to do some reading. Read about what flashing a custom kernel will do for you. Then pick one that's compatible with your firmware and flash it.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Stuck on boot logo
Hi i just flashed the stock firmware acquired from this link:
http://www.sammobile.com/firmwares/3/?download=12748
I got all green in Odin v1.85 but it is stuck on the boot logo
I have rooted/flashed my phone many times so I'm quite confused.
Help much appreciated!!
Wipe data/factory reset?
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Which is the main stock firmware for the i9100?
Hi I am using a vodafone UK branded i9100 firmware and recently decided to cancel my contract. I would like to flash to a stock JB but im not sure which is the right one to download.
I checked the firmware on sammobile but still unsure. Please see attached file.
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
gastonw said:
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
Click to expand...
Click to collapse
Can you flash any s2 stock rom? I see there is difference in the modem code for different countries...
I have
PDA: I9100XWLSH
CSC: I9100OPSLSB
MODEM: I9100XXLS9
So i belive only this ver of stock rom can be flashed???