Hi,sorry to bother you,i've searched for this situation on wiki and of course on the internet,but I wasn't able to get a clue about it.
Here's my issue:
I've flashed my GT-S5830i with [Aroma Mod v.11] using the stock kernel in order to see SIM contacts,but i was forced to install the stock firmware from India (as suggested by the Rom developer/creator),because with italian firmware i was stuck on the GT-S5830i logo...
Now my question: Indian stock firmware Baseband Version is S5830iDDLA1 ,the italian one that I've got at Samsung drivers is different.
Should/Can I replace only the modem "firmware"?
Also this value is different XXLA2 is for Indian stock firmware , XXMB2 is for italian one,what is this value and where i can check it in Aroma Rom,since it's not listed under "Phone Information" ? Just wondering if this can lead to any kind of issue.
If i replace the phone firmware could this break the ROM ? Where to put the XXMB2 file in Odin,in case you suggest me to replace it?
Thanks in advance for your time,consideration and awesome works!
Sorry for my english.
Hey friend here you can get all info about how to flash stock rom by odinhttp://forum.xda-developers.com/showthread.php?t=1840645
And latest firmware of your choise you will get on sammobile just google it
Hit Thanks if I Helped
Hitesh2626 said:
Hey friend here you can get all info about how to flash stock rom by odinhttp://forum.xda-developers.com/showthread.php?t=1840645
And latest firmware of your choise you will get on sammobile just google it
Hit Thanks if I Helped
Click to expand...
Click to collapse
Thanks for the reply,but prolly, I've explained myselft in the wrong way,so far the cellphone is working without any issue,but since i'm a perfectionist ,
I wanna know if it is possible to flash only the Phone part and leave the rest untouched ,and if that could "break" the Rom and revert it to stock.
I've got the latest firmaware for my phone,what I wanna know is if I need to check Re-partion too or not.
Same story for the XXLA2 vs XXMB2 (what is that value by the way ?? ) and what file do i need to use once i've splitted the md5.
Thanks again.
[email protected] said:
Thanks for the reply,but prolly, I've explained myselft in the wrong way,so far the cellphone is working without any issue,but since i'm a perfectionist ,
I wanna know if it is possible to flash only the Phone part and leave the rest untouched ,and if that could "break" the Rom and revert it to stock.
I've got the latest firmaware for my phone,what I wanna know is if I need to check Re-partion too or not.
Same story for the XXLA2 vs XXMB2 (what is that value by the way ?? ) and what file do i need to use once i've splitted the md5.
Thanks again.
Click to expand...
Click to collapse
hey see if you want some part of firmware and leave another untouched i think these is not proper see in the firmware's file Phone,Modem,CSC you have to use same files only see at before i also tried these thing to change some file and all but i failed it wont boot thats why i preffer to use all same files by the way why you want to change those file ?
Hit Thanks if I Helped
Hitesh2626 said:
hey see if you want some part of firmware and leave another untouched i think these is not proper see in the firmware's file Phone,Modem,CSC you have to use same files only see at before i also tried these thing to change some file and all but i failed it wont boot thats why i preffer to use all same files by the way why you want to change those file ?
Hit Thanks if I Helped
Click to expand...
Click to collapse
Actually I'm just wondering if a different BaseBand version could lead to some phone signal issue,like low band signal and so on,that's why I'm asking;but if you're telling me that the phone will work perfectly fine.even with that diffrent BaseBand version,I'll be good (I've installed Aroma v11 yesterday,so I'm "testing" it)also what are XXLA2 and XXMB2 ?
Related
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Not sure what you are asking .
Firmware is not kernel whatever your correct firmware is that includes the kernel .
You have a 1900P whatever the P is .
Find the firmware not the kernel here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Alternative
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero .
Return to service centre .
jje
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
wowandroid said:
Thanks for your fast reply JJEgan. Could you please tell me which stock fw/rom i need to download as the only one that looks close to mine (KI3) is a poland one and i'm in UK.
Click to expand...
Click to collapse
No idea what your firmware is as you have fl;ashed it .
Based on OP KI3
Then use KI4 CPW UK firmware is what i would do to get back to a working phone ,
CPW (UK): http://www.multiupload.com/QROGHPRZVK
jje
Many thanks for showing me the correct version. I wasn't too sure as i didn't want to mess up the phone permanently. So i simply follow the ODIN boot loop guide?
The way it looks to me is that CWM/Phone is corrupted as i've tried everything - mount/format/unmount/re-mount sd, but it won't detect.
OH BTW! Can you please clarify something for me. I thought that since my orange stock rom said "KI3", i must always get a "KI3"....have i got that wrong? if so how can a KI4 work on a KI3 and why is it not necessary to stick with KI3?
Hey there wowandroid, the KI* is, in my humble opinion just a revision number, higher could mean better reliability in terms of signal and perhaps even battery drain
Sent from my GT-I9100 using XDA App
thanks AJ. It's just that my i9100 is P model (i9100P) and has NFC capabilities. I've managed to flash the phone back with the ki4 rom, so big thank you to JJEgan. I just thought that because i have a p model, i might end up removing features once i flash with a ki4.
Anyway, now that i've got it working, can i go ahead and use odin to flash villianrom/checkrom back again?
wowandroid said:
Hi guys,
I got my orange samsung galaxy s2 less than a week. Yesterday after rooting, flashing villianrom, i like an idiot, installed Clearglass 1.6 Theme zip via CWM. After rebooting, the phone has now gone into a boot loop. But since i had a nandroid backup (NOT A ZIP FILE!), i thought i'll simply restore...but i can't! The sdcard won't mount. So then i found THIS THREAD.
After following the instructions, i still can't mount the SD Card, yet it's fine in windows 7.
I also thought i'd try to use the ODIN method to reflash my stock fw, but i can't find the correct kernel version . FYI, i'm from uk and the details of my phone are below:-
MODEL: GT-I9100P
ANDROID VERSION: 2.3.4
BASEBAND VERSION: I9100PBVKI2
KERNEL: [email protected] #2
BUILD NO: GINGERBREAD.BVKI3
PLEASE PLEASE HELP ME! I can't be without my phone
Click to expand...
Click to collapse
Should help you http://forum.xda-developers.com/showthread.php?t=1108499
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
wowandroid said:
hi checkrom, nice way of upping ur post count, lol. if you hadn't noticed, i have already managed to get the phone working...i now want to know if its safe to reflash villian, since i've lost CWM.
Click to expand...
Click to collapse
Ok sure!
Best would be just flash a suitable CF Root
And then u will get CWM after that baam install Villan
(LOL 5 min wate took me so long)
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
wowandroid said:
cheers mate. I assume from your nick on forum that you've got checkrom? If so, could you tell me how you get a great looking theme installed after checkrom has been flashed? The last time i tried it, i messed up and none of the kitchen apps themes ever changed the looks (just boring samsung looks)
Click to expand...
Click to collapse
checkrom is compactable with every Theme out there if its built for the latest XWKK5 version which checkrom is on!
So first
1)Install ROM
2)Use there Kitchen Download only any one of the themes, and hit apply and then install (Obviously)
OR
You can Download manually from the Forums any theme or any thing for stock XWKK5
3)After a theme install u will reboot.
4)Then use there Kitchen to flash any mods etc u want
Personally i use this via Kitchen http://forum.xda-developers.com/showthread.php?t=1310527
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
wowandroid said:
thanks checkrom. I don't suppose we can chat on skype/msn/yahoo? I just need some help, and could do with instant answers if i get stuck. If you can, pls PM me.
Thank You
Click to expand...
Click to collapse
just post here if u get suck i am available for an hour haha
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
wowandroid said:
thanks...the problem is that i'm fixing a DSi for the kids...i'm going to be at least an hour or two.
Click to expand...
Click to collapse
Just pm me i will reply asap i gt the pm
thats kool, thanks!
wowandroid said:
thats kool, thanks!
Click to expand...
Click to collapse
My pleasure
hi guys,
i'm about to get started with the update. couple of questions though:-
1. What kernel do you recommend? I need a kernel which gives it the longest battery life if possible.
2. What theme do you recommend? I need a theme which is good eyecandy, but isn't too bloated. Something like this for the villianrom:- http://forum.xda-developers.com/showthread.php?t=1229723
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
wowandroid said:
hi guys,
i'm about to get started with the update. couple of questions though:-
3. Is there a rom posted that has already been customised and tweaked with popular kernels/themes? Saves me messing around.
Click to expand...
Click to collapse
Yep look in development section .
jje
hey guys
need a little help plz.
first it was all right i used loads of custom ROMs on my phone and they all worked perfect. now also they work good but people who are trying to call me are not able to reach me easily.the call doesn't get completed only .. what could be the problem ? baseband change ? if yes then how to keep it to stock baseband ?and since yesterday am not facing any problem as i put the stock ROM ! (but i want to use cutsom ROMs )
thank you
roddem said:
hey guys
need a little help plz.
first it was all right i used loads of custom ROMs on my phone and they all worked perfect. now also they work good but people who are trying to call me are not able to reach me easily.the call doesn't get completed only .. what could be the problem ? baseband change ? if yes then how to keep it to stock baseband ?and since yesterday am not facing any problem as i put the stock ROM ! (but i want to use cutsom ROMs )
thank you
Click to expand...
Click to collapse
when using Custom Rom's try changing the Baseband/Modem and see
u can dwnld them HERE and flash the same thro ur custom recovery, try a cpl of them to see the one that gives u best results.
Also dwnld 'GetRil' app from stores and try to match the 'RIL (Radio Interface Layer) with the modem
Sun90 said:
when using Custom Rom's try changing the Baseband/Modem and see
u can dwnld them HERE and flash the same thro ur custom recovery, try a cpl of them to see the one that gives u best results.
Also dwnld 'GetRil' app from stores and try to match the 'RIL (Radio Interface Layer) with the modem
Click to expand...
Click to collapse
thank you so much ! i guess i should flash the same baseband as is of the stock ROM ! will give it a shot and post back
thank you
roddem said:
thank you so much ! i guess i should flash the same baseband as is of the stock ROM ! will give it a shot and post back
thank you
Click to expand...
Click to collapse
I had this same problem because I wasn't paying attention and flashed a i9100 phone with i777 ROM. Everything worked perfect except for the phone. Double check and make sure you are flashing the correct ROM for you phone.
n2nin said:
I had this same problem because I wasn't paying attention and flashed a i9100 phone with i777 ROM. Everything worked perfect except for the phone. Double check and make sure you are flashing the correct ROM for you phone.
Click to expand...
Click to collapse
m still having the same problem
no flashing the correct ROM !
Sun90 said:
when using Custom Rom's try changing the Baseband/Modem and see
u can dwnld them HERE and flash the same thro ur custom recovery, try a cpl of them to see the one that gives u best results.
Also dwnld 'GetRil' app from stores and try to match the 'RIL (Radio Interface Layer) with the modem
Click to expand...
Click to collapse
still the same problem flashed the baseband also
Pretty simple question here. I searched the forums before starting this thread, but I got contradicting results...
I have Stock Samsung ICS 4.0.4 XWLPW on my GT-I9100. It has the default modem for my country, but I want to flash KH3 modem on it for better reception and battery life. Is it possible? (I didn't wanna try as last time I lost my CSC when I was flashing another modem and then did nandroid restore... )
I hope to get a reply.
Thanks!
jj_95nano said:
Pretty simple question here. I searched the forums before starting this thread, but I got contradicting results...
I have Stock Samsung ICS 4.0.4 XWLPW on my GT-I9100. It has the default modem for my country, but I want to flash KH3 modem on it for better reception and battery life. Is it possible? (I didn't wanna try as last time I lost my CSC when I was flashing another modem and then did nandroid restore... )
I hope to get a reply.
Thanks!
Click to expand...
Click to collapse
u can as long as u get a tar file (or the Modem.bin file of KH3) of the same to flash vide ODIN, if ur Stock 4.0.4 is not rooted.
If rooted with a wrk'ng CWM then u can flash the Zip version which is easily available
Hey,
Just flash trough Odin(If tar) or CWM(if zip) And nothight bad will happen..
Just do NANDRIOD BACKUP
I flashed modem many times and and nothing happened..
Sun90 said:
u can as long as u get a tar file (or the Modem.bin file of KH3) of the same to flash vide ODIN, if ur Stock 4.0.4 is not rooted.
If rooted with a wrk'ng CWM then u can flash the Zip version which is easily available
Click to expand...
Click to collapse
Paulius7 said:
Hey,
Just flash trough Odin(If tar) or CWM(if zip) And nothight bad will happen..
Just do NANDRIOD BACKUP
I flashed modem many times and and nothing happened..
Click to expand...
Click to collapse
What about RIL? Should I use GetRIL? According to certain users, they loose signal if they match baseband and RIL using GetRIL...
I don't know if my getRIL matches but I have good signal So Do if you want.
P.S. I Created my Rom so I edited settings in What I want and my battery life is good
Paulius7 said:
I don't know if my getRIL matches but I have good signal So Do if you want.
P.S. I Created my Rom so I edited settings in What I want and my battery life is good
Click to expand...
Click to collapse
So i went ahead and flashed KH3. Everything is fine but Ril and baseband don't match. As of now I have excellent ovenight battery drain. Lost just 2% over 9hrs that the phone was left sleeping. I just hope that I won't face any problems
due to the mismatch...
Sent from my Bathtub using bubbles
Like I said
Send form Galaxy S2. But I don't have it :-\
Hello guys....
I am very thankful to the xda forum and all the members who helped me to get through a serious problem..
Recently I installed 4.3 Leaked version on my GT-I9300 and the ROM proved to be worst ROM of life. So I decided to go back to 4.1.2.
I installed the Stock ROM via Odin but I confronted a serious issue, when I was finished the installation I found that there was no network at all... Samsung's official told me that it is impossible to reverse the Android version...
I had no clue what to do. I flashed many ROMs but no solution at all. My IMIE was also kinda jumbled..
Many guys said it is EFS issue... But it is not EFS issue...
It is all because of different Modem issue.. all you need to do is just install a clean Stock ROM from http://www.sammobile.com/firmwares/2/ and Install the patched modem... you are done..
So here is the solution:
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijpxqjms/Patched_Modem_I9300XXEMG4.zip
You are done....
This problem is all about MODEM version, so I don't think if EFS tricks are involved here.....
Finally credits go to all the XDA Members who put their heart and soul to present all the required guidance for me to be able to downgrade to lower Android Version.. I have only compiled the whole stuff into a single thread....
Thanks,,,
Custom rom from sammobile ???????since when have sam made custom roms .
STOCK ROM yes .
The Downgrading from 4.3 to 4.2.1 and the No Network Issue...
Is well posted in the faqs and guides for those that actually read them .
Sadly most are to lazy /
Sorry for the Wrong Term...
JJEgan said:
Custom rom from sammobile ???????since when have sam made custom roms .
STOCK ROM yes .
The Downgrading from 4.3 to 4.2.1 and the No Network Issue...
Is well posted in the faqs and guides for those that actually read them .
Sadly most are to lazy /
Click to expand...
Click to collapse
Sorry I wrote that mistakenly...... My bad...
Thanks for the guide you save me from a lot of work :good::good:
hugs
First time flashing a Samsung device, are there any risks involved in the above process i.e. wrong country and secondly, @featherknox why is a custom recovery required, is there no way to flash a stock rom straight over another stock rom with out it?
featherknox said:
Hello guys....
I am very thankful to the xda forum and all the members who helped me to get through a serious problem..
Recently I installed 4.3 Leaked version on my GT-I9300 and the ROM proved to be worst ROM of life. So I decided to go back to 4.1.2.
I installed the Stock ROM via Odin but I confronted a serious issue, when I was finished the installation I found that there was no network at all... Samsung's official told me that it is impossible to reverse the Android version...
I had no clue what to do. I flashed many ROMs but no solution at all. My IMIE was also kinda jumbled..
Many guys said it is EFS issue... But it is not EFS issue...
It is all because of different Modem issue.. all you need to do is just install a clean Stock ROM from http://www.sammobile.com/firmwares/2/ and Install the patched modem... you are done..
So here is the solution:
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijpxqjms/Patched_Modem_I9300XXEMG4.zip
You are done....
This problem is all about MODEM version, so I don't think if EFS tricks are involved here.....
Finally credits go to all the XDA Members who put their heart and soul to present all the required guidance for me to be able to downgrade to lower Android Version.. I have only compiled the whole stuff into a single thread....
Thanks,,,
Click to expand...
Click to collapse
I can confirm that this method works. XEMB5 (4.1.2 stock rom) on top of the crappy 4.3 update, rooted it and then installed CWM. flashed the patch modem from the link he gave and the XEMB5 rom is working with network running again. but it seems like the battery is awful, 95% in just 10 minutes? lost 5 percent for that short amount of time -_-
then again, thanks for this!
Battery Drain
thehavoc said:
I can confirm that this method works. XEMB5 (4.1.2 stock rom) on top of the crappy 4.3 update, rooted it and then installed CWM. flashed the patch modem from the link he gave and the XEMB5 rom is working with network running again. but it seems like the battery is awful, 95% in just 10 minutes? lost 5 percent for that short amount of time -_-
then again, thanks for this!
Click to expand...
Click to collapse
Yes after flashing this modem the battery drains so quickly..
I am looking for any solution. Hopefully any developer would come with a good solution.
In battery system I see The Android System draining almost 25 to 30 percent of battery
I had the same issue, but with the help of xda , now everythings normal. but i have a question, with no oficial advances from samsung can i go back to flashing with no danger ?
thx , sorry for my english
Josemonteiro90 said:
I had the same issue, but with the help of xda , now everythings normal. but i have a question, with no oficial advances from samsung can i go back to flashing with no danger ?
thx , sorry for my english
Click to expand...
Click to collapse
My problem is little different. I can flash any ROM via Odin[DO NOT FORGET TO CHARGE YOUR MOBILE ABOVE 80% battery level!]:
1. Goto recovery by pressing "vo upl+home+power" release when you Samsung's bootloader.
2. Do factory reset/wipe everything.
3. Remove battery for 10secs. Then put it back.
4. Now press "vol down+home+power" to bring it into download mode. Then follow odin flashing procedure. It will work for any Samsung rom. No need to intall any custum roms.
Now going to my problems:
A. My s3 shuts down when it's idle.
B. Bluetooth button does not work. It tries to go to ON position but goes back OFF after 2/3 sec.
After downgrading from earlier 4.3 [SWC] I have even upgraded it with latest 4.1.2 xxemh4 but no luck!
Every thing works network, wi-fi etc. except above two problems!
Help me please!!
I FOUND SOMETHING, WHEN I DO *#1234* IT SAYS CSC: UNKNOWN though my network is ok and wi-fi works fine. Lemme try patching CSC as featherknox suggested!
@featherknox, But your patched modem can not be flashed in recovery[stock] mode as it says "Signature verification failed". HELP ME WHAT I SHOULD DO?
problem after flashing rom
why when i flashing that rom to downgrade from 4.3 to 4.2.1(ROM from sammobile) it stuck at samsung logo and always repeat the samsung logo. help me please. thanks
wannn97 said:
why when i flashing that rom to downgrade from 4.3 to 4.2.1(ROM from sammobile) it stuck at samsung logo and always repeat the samsung logo. help me please. thanks
Click to expand...
Click to collapse
first of all 4.2.1 or 4.1.2 ?
secondly have you wiped data/cache/dalvik cache and format system ?
Third did you try flashing any other supported kernels for your current android version ?
Galaxy S3 Updating causes Emergency Calls Only
Hi People i want to share my problem here which im facing from many days , I have updated My Galaxy S3 from Android 4.0 ICS to Offical Android 4.1.2 Jelly Bean for my country which i have downloaded from Sammobile via Odin After updating my phone im facing Emergency Calls only problem and also lost my IMEI which changed like 0049 i have searched many time on google nut cannot find a perfect solution for it plz any one help me it will be appriciatiable Thanx
Go read the efs thread in general forum, stickies.
Sent from my GT-I9300 using Tapatalk
Unknown baseband and null IMEI on samsung gs3 (I9300) after downgrading from 4.3
Dear All, pls give me a solution for my problem.
i have intl version of GS3 (I9300), recently i have updated my GS3 to 4.3 via ODIN then i have rooted my mobile to install slimbean rom. all was well until yesterday. but i decided to go back to 4.1.2 and flashed official ROM with baseband (MG4). from then onwards my mobile is showing sim not found, unknown baseband and null imei.
can anyone help me in solving this problem. thousand thanks in advance.
rajugsg2702 said:
Dear All, pls give me a solution for my problem.
i have intl version of GS3 (I9300), recently i have updated my GS3 to 4.3 via ODIN then i have rooted my mobile to install slimbean rom. all was well until yesterday. but i decided to go back to 4.1.2 and flashed official ROM with baseband (MG4). from then onwards my mobile is showing sim not found, unknown baseband and null imei.
can anyone help me in solving this problem. thousand thanks in advance.
Click to expand...
Click to collapse
Read my signature for your answer.
Sent from my GT-I9300 using Tapatalk
i will test this tuto, because i have the same problem , the generic imei 0049 etc.. i dont have the efs backup , i hope this make my s3 funcional
sorry for my ingles!
Edit
Not working for me.... any ideas?
boomboomer said:
Read my signature for your answer.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
i am still waiting for solution to my problem. can anyone answer pls.
regards
rajugsg2702 said:
i am still waiting for solution to my problem. can anyone answer pls.
regards
Click to expand...
Click to collapse
Have You tried this solution by featherknox ??????
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijp...9300XXEMG4.zip
You are done....
plz try this again and tell me if this works...
Muhammad Ameen said:
Have You tried this solution by featherknox ??????
1. Download your desired Stock ROM for your Country from Sammobile...
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode.
You are done....
plz try this again and tell me if this works...
Click to expand...
Click to collapse
it didnt work for me. i did the sameway as u have mentioned, i have even read featherknox posts in this forum but failed to bring back baseband version. pls suggest me what next
rajugsg2702 said:
it didnt work for me. i did the sameway as u have mentioned, i have even read featherknox posts in this forum but failed to bring back baseband version. pls suggest me what next
Click to expand...
Click to collapse
Read the faqs and guides or take to a service centre .
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Northern.dj said:
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/2/?page=3&download=21565
flash this using odin on your pc
tomosh22 said:
http://www.sammobile.com/firmwares/2/?page=3&download=21565
flash this using odin on your pc
Click to expand...
Click to collapse
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Raulinho7 said:
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Click to expand...
Click to collapse
I agree I don't want 4.3 as its a mess the clue is in the tittle !!!!
Firmware on sammobile Good as it is are single file and its well documented that as this has a partition change to go back you need to do a re partition that can not be done with a single file flash
Northern.dj said:
I agree I don't want 4.3 as its a mess the clue is in the tittle !!!!
Firmware on sammobile Good as it is are single file and its well documented that as this has a partition change to go back you need to do a re partition that can not be done with a single file flash
Click to expand...
Click to collapse
Here is my exp....from 4.3 to 4.1 BTU
i did a manual flash of 4.3 from odin as my s3 is branded and i wanted the 4.3 update ..but then due to all the issue i wanted to go back to 4.1.2 BTU..
so i downloaded the MG4 BTU from sammobile and flashed it using ODIN on top of the 4.3, this of course landed me in a boot loop. I had not backed up my phone so i then re-flashed 4.3 back and that worked fine, i didnt lose any apps etc. So did my back up and the did a full wipe via the custom recovery and flashed MG4 this worked ok....
I dont know why i was in a bootloop after going back to MG4, i guess it was because i needed to wipe data etc before flashing the file?
Anyway this processed worked me...
ive been only flashing Stock rooms from day one...all of them being BTU as my phone is tmob branded and they dont seem to release any updates.
Basic Faqs and Guides its all posted .
If you want to roll back stock but do not want to backup your EFS folder then its your risk .Likewise if you fail to understand EFSv2 etc .
Anyone looking to repartition or mess with PIT on a I9300 is asking for a brick .
JJEgan said:
Basic Faqs and Guides its all posted .
If you want to roll back stock but do not want to backup your EFS folder then its your risk .Likewise if you fail to understand EFSv2 etc .
Anyone looking to repartition or mess with PIT on a I9300 is asking for a brick .
Click to expand...
Click to collapse
Like I said in the original post No firmware from Sammobile will work as the Bootloader has changed hence the boot loop
Samsung has pulled this with no Fix for the users that now have this
They need a way back to 4.1.2 with out rooting involved
Northern.dj said:
Like I said in the original post No firmware from Sammobile will work as the Bootloader has changed hence the boot loop
Samsung has pulled this with no Fix for the users that now have this
They need a way back to 4.1.2 with out rooting involved
Click to expand...
Click to collapse
Contact Samsung .
JJEgan said:
Contact Samsung .
Click to expand...
Click to collapse
:silly: I would of thought XDA would of taken this challenge on i hope some one can come up with a fIx for this
or has XDA given up on doing this
Raulinho7 said:
why would he do that?
he wants to go back to 4.1.2 and u give him a link for 4.3
Click to expand...
Click to collapse
no thats a 4.1.2 rom, i have it as my secondary rom and in settings\about device\ it syas Android Version: 4.1.2
---------- Post added at 10:21 PM ---------- Previous post was at 10:16 PM ----------
No thats a 4.1.2 rom, i have it as my secondary rom and in settings\about device\ it syas Android Version: 4.1.2
EDIT: Hmm, i checked the download page again and it turns out you were right and it does say 4.3. Maybe because of were i live the phone reverted back or something. Sorry for the inconvenience.
Northern.dj said:
Stock UK BTU Rom Only no leaked ones or custom Roms
Ok Guys I no there is alot on here at the moment on how to Roll Back to 4.1.2 but that seems to be custom roms (pleas point me in the right direction if wroung)
Now I no a Single file Flash will not work so it needs to be a three file
But Here in the UK as you may or may not no 4.3 was rolled out and well its a mess so we need to help people roll back to stock BTU
Battery drain connection issues and others are the main problems
so we need a way to Help UK BTU users a way Back that works and does not brick there phones
I no the custom Guys Have managed this but that involves rooting and saving the EFS fold
that is all to complicated to get a Normal user to do
I no back in the days of Flashing we used three files and a pit file and re partition the phone
Back in the day we had to do this on the Galaxy S so no worries
we just need to know How and has it worked
So can you Guys Help Here ??????
Click to expand...
Click to collapse
Man, I am now consider myself a victim to Samsung's trick- JB 4.3 leaked vodafone test files [no matter whether it xxxx.vdi/vdf/btu [thanks to faryaab] they all have same thing- change log/apps etc. too... I tested first two releases on top of my xxemh4. Both turned out during first boot "Deustchland" as primary language and felt something wrong on contrary Ireland/swisscom tags...However I kept on trying and voila...i found both as emulated version. However, i liked battety backup[w.r.t. me], camera, connecting to pc with previews of images and some other features. Then I saw this samsung's latest 4.3 Chinese version with different changelog. I tried flashing it but failed. Then I thought it might be a problem of that emulated ireland/swisscom version of 4.3. Just thought, back to original 4.1.2 may get me flashed this this Chinese 4.3. So thus did data flash/factory reset/ cache wipe etc from stock recovery mode and flashed this 4.1.2... it worked fine[downgrade method]. Then tried to get installed the Chinese 4.3. But failed still. Now, suddenly today I found that my s3 i9300 suffering from two problems with this stable rom 4.1.2 xxemh4 [upgraded through kies from previous another version of 4.1.2 which was kept on my pc for any eventuality]:
1. Bluetooth button does not get turned on
2. Phone shuts down when idle
My next method is to flash with pit, bootloader etc as given inhttp://forum.xda-developers.com/showthread.php?t=2535367
Lemme see whether it helps myself
IT DIDN'T HELP! Though my network is ok, and so thus wi-fi, I just checked *#1234* and says CSC: UNKNOWN!!!
I am now trying to patched CSC with this one from " this as suggested featherknox]