i have just compiles cm10.1 for one xl .
it have 1 gb ram but in settings only 789 mb , how i correct that?
thanks in advance :good:
isn't that normal? because it takes about 120mb more to get GPU working.
as far i know, in android you cant get full access of your RAM
pimpcorp said:
isn't that normal? because it takes about 120mb more to get GPU working.
as far i know, in android you cant get full access of your RAM
Click to expand...
Click to collapse
Actually i noticed it today after i flashed my new compiled rom but i will check
pukeup said:
Actually i noticed it today after i flashed my new compiled rom but i will check
Click to expand...
Click to collapse
is it custom or the stock one that you mod and tweak after?
it might be the problem
pimpcorp said:
is it custom or the stock one that you mod and tweak after?
it might be the problem
Click to expand...
Click to collapse
i compiled CM10.1, it is base for another rom
pukeup said:
i compiled CM10.1, it is base for another rom
Click to expand...
Click to collapse
well hopefully the rom help you alot,
for me that rom is little buggy, so i prefer CM9.1 until 10.1 fix up
What's working and what's not working in the 10.1 pukeup? is bluetooth working?
but i agree, when you install your rom the system is going to use some of the resources . and display what is left over.
Warped420 said:
What's working and what's not working in the 10.1 pukeup? is bluetooth working?
but i agree, when you install your rom the system is going to use some of the resources . and display what is left over.
Click to expand...
Click to collapse
Everything works
Sent from my One X using xda premium
Related
Hi, everybody, i'm a member of Tinh Tế Forum, i flashed MIUI rom 2.4.27 ported by HDJACk, everything is ok but 3G not work, and he still has not found way to fix this problem, please help
This rom MIUI 2.4.27 (android 2.3.7): http://www.mediafire.com/?ea8e2ad9nz1n0wy
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
michaeljwestii said:
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
Click to expand...
Click to collapse
Is 3G working for CM7.2 GB 2.3.7 ?
prasad12ka4 said:
Is 3G working for CM7.2 GB 2.3.7 ?
Click to expand...
Click to collapse
This thread is talking about the ICS build, not GB. And 3G does work on mine running CM 7.2.
michaeljwestii said:
This thread is talking about the ICS build, not GB. And 3G does work on mine running CM 7.2.
Click to expand...
Click to collapse
thanks that's all i wanted to know
michaeljwestii said:
I'll flash it over the weekend and see what I can figure out. Can the phone make voice calls at all?
Click to expand...
Click to collapse
voice call is good, but 3G not work, i tried to creat the APN, but can't save it
This ROM is so close to being ready for primetime! Everything seems to work except for 3G. No lag at all, very smooth. I can't wait to see what the guys come up with. I still prefer a CM based ROM though, I'm not a fan of MIUI's graphics.
michaeljwestii said:
This ROM is so close to being ready for primetime! Everything seems to work except for 3G. No lag at all, very smooth. I can't wait to see what the guys come up with. I still prefer a CM based ROM though, I'm not a fan of MIUI's graphics.
Click to expand...
Click to collapse
HDjack is going to release CM9 rom soon, please visit: http://www.tinhte.vn/threads/899475/
changkho1908 said:
HDjack is going to release CM9 rom soon, please visit: http://www.tinhte.vn/threads/899475/
Click to expand...
Click to collapse
thank you friend that was exactly what i was waiting for..
this miui version based on gingerbread 2.3.7?
where is the ics then?
Also headset doesn't work in this new MIUI ROM.
Using this rom, I modify from original rom and you can switch 2G/3G without FC
https://drive.google.com/folderview?id=0B9hsvqns6CCbNGFPeFZPcXVTRG8&usp=sharing
nightstorm8x said:
Using this rom, I modify from original rom and you can switch 2G/3G without FC
https://drive.google.com/folderview?id=0B9hsvqns6CCbNGFPeFZPcXVTRG8&usp=sharing
Click to expand...
Click to collapse
The ROM download link doesn't work.
streak4m3 said:
The ROM download link doesn't work.
Click to expand...
Click to collapse
Link work as it
Thanks, was able to download.
Sent from my Nexus 5 using Tapatalk
how about camera? fix or still fc?
this is a rom port for nexus one based on cm7.2 nightly and lewa 12.09.21
Working
Boot
Touchscreen
Lewa Apps and Launcher
Sd-Card
Wifi
Sms and Call -2g/3g
Bluetooth
Accelerometer
Audio
headphone
Superuser root updated and works
Installing Apps
GPS
Virtual Keys
Brightness
Sensors
Charger
Camera
USB Connection
Deep Sleep
Browser
Other's
Not Working/Broken:
CM7 Bugs
Please test the build and let me know if there are any bugs
Download link
Test Build 3(22nd Sept)
http://www.mediafire.com/?1jpji07o5mv6hlh
Note: I don't have the device as of now so please test it for me and let me know...enjoy
Feedback welcomed!!
Old outdated download
Test Build 2
http://www.mediafire.com/?hasaiz63gb80ohx
Test Build1
http://www.mediafire.com/download.php?d7t0l6klzhrb7e5
MR_EVIL said:
this is my first rom porting for nexus one...will be uploading the build in few mins...the only problem i have is graphical glitches ...screen keeps on flickering..any dev can help me iron out that issue will really be helpful
Click to expand...
Click to collapse
I think this rom was already ported.
Menelkir said:
I think this rom was already ported.
Click to expand...
Click to collapse
yeh i know but the file manager was not working and there were many issues apart from that and the OP has not updated it so i decided to port it
DO this, AND DO IT! take libhardware_legacy.so from a cm7 nexus one working rom and swap it into this port (lewa rom) and tell me how it goes
Wifi issue can be something related to wifi module or wpa_supplicant config file (located in /system/etc/wifi). Give a shot.
Btw, if this rom is cm7 based, you can try using some different kernel, like tiamat.
Menelkir said:
Wifi issue can be something related to wifi module or wpa_supplicant config file (located in /system/etc/wifi). Give a shot.
Btw, if this rom is cm7 based, you can try using some different kernel, like tiamat.
Click to expand...
Click to collapse
thanks wifi issue got resolved...will try tiamat kernal
Madflapjack said:
DO this, AND DO IT! take libhardware_legacy.so from a cm7 nexus one working rom and swap it into this port (lewa rom) and tell me how it goes
Click to expand...
Click to collapse
tried it but screen flickering is still there any other solution..
tiamat kernal gives me black screen on boot...no go..
MR_EVIL said:
tried it but screen flickering is still there any other solution..
Click to expand...
Click to collapse
actually that fix was for wifi, idk about screen flickering... when i get my device back from repairs i will see..
MR_EVIL said:
tiamat kernal gives me black screen on boot...no go..
Click to expand...
Click to collapse
Make sure that you didn't flash the ICS version. Flash v4.1.0 for Gingerbread
Sent from my Nexus One using XDA
Screenshots?
Sent from my Nexus One using XDA
cpm said:
Make sure that you didn't flash the ICS version. Flash v4.1.0 for Gingerbread
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
yeah i tried the GB version V4.1.0 and screen blackout is the result..
citizen-erased said:
Screenshots?
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
will upload the screenshots tonight..
If you followed all the steps properly, It cannot be any errors except for apps/base ROM's error.
I cannot update my port because I am 15 years old(14, in other country) and I have to study for the final exam
ps.I uploaded my latest port 'cause I had free time
reider123 said:
I cannot update my port because I am 15 years old(14, in other country)
Click to expand...
Click to collapse
happy birthday!
updated the lewa Port..enjoy...
hi , here have not updated ?
I love this ROM .
new LEWA is 09.05
MR_EVIL said:
updated the lewa Port..enjoy...
Click to expand...
Click to collapse
When is the new update coming
Sent from my Nexus One using xda premium
Viditoswal said:
When is the new update coming
Click to expand...
Click to collapse
Next friday at 20:00 UTC +9.
tommert38 said:
Next friday at 20:00 UTC +9.
Click to expand...
Click to collapse
LEWA for nexus one ?
Really?
I'm looking forward to it .
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Im going to try this too.
Can i flash it via SS3.11?
what's the base? cm10 aokp etc. ?
will it work @bmm
There is no need to enable USB debugging even if titanium ask for that .it works without enabling since gingerbread. you can switch off the message inside titanium setting.however USB debugging is inside developer settings menu.this ROM is old.that's why it's not listed here
xtam said:
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Click to expand...
Click to collapse
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
xtam said:
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
Click to expand...
Click to collapse
You can enable USB debugging tapping 4 or 5 times (don't remember exactly) over Compilation Number at Phone Info Settings. You will get a notice adverting you about it...
davtse said:
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
Click to expand...
Click to collapse
Yeah, it's Kexec i'm sure... I have seen it on the zip
This rom is not old, it is from 15 mar 2013
Base is probably some cm
Kernel is kexec, you can flash it having already installed any other kernel
In bmm 0.3.4 just enable kexec, i have it on slot_3
kernel inside this rom is 3.0.31 by dhacker29
it can be connected to usb pc and there is no reboot.
davtse said:
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
Click to expand...
Click to collapse
yes, it is kexec, after downloading you can see it in folder /system/etc/kexec
xtam said:
yes, it is kexec, after downloading you can see it in folder /system/etc/kexec
Click to expand...
Click to collapse
hmm tried it for just abit on system 2 of bmm, it's seems pretty stable, but i think i will stick with the non-kexec version for the time being. works better with motomizer for underclocking/undervolting
http://sts-dev-team.crackflasher.com/nightlies/umts_spyder/liquidsmooth/
It's not based on CM or AOKP, Liquid Smooth uses their own source.
Just installed it in Slot_2 using BMM and works like a charm! Smooth, fast and a lot of customization options. Really I love it!!
I hope they can add Spanish language because with morelocale is not enough to get everything in spanish.
Thanks for this!!
shobon said:
It's not based on CM or AOKP, Liquid Smooth uses their own source.
Click to expand...
Click to collapse
are there any other roms based on new kexec kernel, which also uses own sources, not aokp or cm ?
xtam said:
are there any other roms based on new kexec kernel, which also uses own sources, not aokp or cm ?
Click to expand...
Click to collapse
I think Dtrail is trying to come up with one, but i think the current batches are all based on whatever source Hashcode and Dhacker have released so far. Maybe some time in the future..
What about bugs?
xtam said:
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Click to expand...
Click to collapse
I tried doing a search on Google but couldn't find much information of it unfortunately , From what I can tell, it seems to be on 4.2.2 but I guess we all need a tad bit of instructions :laugh:
Edit;
E.g. Information such as bugs, working h/w composer etc.
GSM? or does umts spyder already suggest that it's for gsm
QUICK QUESTION!
Are there any pre-requisites for installing this rom? Currently running Jbx 1.0
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Hello, where to find more on this? I mean, specs, screenshot, etc
Looks interesting, I will try this asap
Sisqo said:
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Hmm.. I've been using Jbx 1.0 and camera flash seems to be working fine
Sisqo said:
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
dhacker29 told on twitter that hashcode0f is working on it and probably will be later, in kernel 3.0.68 should be hdmi
https://twitter.com/dhacker29/status/313566333612736512
and they are working on camera:
https://twitter.com/Hashcode0f/status/312265780156833793
justcookiesncream said:
Hmm.. I've been using Jbx 1.0 and camera flash seems to be working fine
Click to expand...
Click to collapse
jbx is based on the stock 4.1 rom if i'm not mistaken, the roms that have issues with camera flash are the ones that are cm/aokp/liquidsmooth based roms, which are 4.2 and above.
Is their any 5.1 rom available for Karbonn Titanium S2 Plus?
CM12 ?
Prayers listened
Casanova99 said:
Is their any 5.1 rom available for Karbonn Titanium S2 Plus?
CM12 ?
Click to expand...
Click to collapse
Hey man I'm a developer....i've working cm12,cm12.1,resurrection remix,pac man,carbon and many more ROMS...they however take your battery life away...im working on it and will upload soon .....stay tuned
ghousekhasim said:
Hey man I'm a developer....i've working cm12,cm12.1,resurrection remix,pac man,carbon and many more ROMS...they however take your battery life away...im working on it and will upload soon .....stay tuned
Click to expand...
Click to collapse
Any updates bro?
Yes working
Casanova99 said:
Any updates bro?
Click to expand...
Click to collapse
Everything works...currently running on my fav resurrection remix but having 512mb ram is a great disadvantage....I have slow net so uploading is a pain in the....well another uploader has uploaded ill give you a link
ghousekhasim said:
Everything works...currently running on my fav resurrection remix but having 512mb ram is a great disadvantage....I have slow net so uploading is a pain in the....well another uploader has uploaded ill give you a link
Click to expand...
Click to collapse
Okay bro waiting for the link
By the way even i am using resurrection remix 5.1 rom in my phone but it have lots of bugs.
Yeah
Casanova99 said:
Okay bro waiting for the link
By the way even i am using resurrection remix 5.1 rom in my phone but it have lots of bugs.
Click to expand...
Click to collapse
What bugs? me currently on carbon rom....pac has a lot of bugs.......Bliss pop is good but 512mb ram takes away everything
ghousekhasim said:
What bugs? me currently on carbon rom....pac has a lot of bugs.......Bliss pop is good but 512mb ram takes away everything
Click to expand...
Click to collapse
Bluetooth don't work
Can't create hotspot.
Video recording bug
Device don't connect with pc
Random power off
Whenever we power on the device it goes to recovery mode
And many more
So i get back to stock rom yesterday as i don't find any other 5.1 stable rom.
Hey bro I also want the stoke rom. So can u help me out with it..
hi everyone. firstly, excuseme me for my bad english.
ı installed epinter rom cm 10.2 android 4.2.2 but don't work wifi and bluetooth. Do you have a stable ROM that you can advise me?
Hello,
quite stable is cm 7.2 or most stable original firmware but don't install google services because phone will lag.
lokr said:
Hello,
quite stable is cm 7.2 or most stable original firmware but don't install google services because phone will lag.
Click to expand...
Click to collapse
thank you very much. I will try it
ROM Motorola Atrix
Optimus White said:
hi everyone. firstly, excuseme me for my bad english.
ı installed epinter rom cm 10.2 android 4.2.2 but don't work wifi and bluetooth. Do you have a stable ROM that you can advise me?
Click to expand...
Click to collapse
Hi,
here is another one, based on the epinter-source 10.1, working for me. I installed it 10 days ago, using it daily.
http://forum.xda-developers.com/showthread.php?t=2292347
Especially WiFi and Bluetooth are working.
What does not work is Speech-to-text for most apps while Google Voice is working.
On my MB860 I reach about two days while "light" usage between charging.
Hope this helps,
BR
Oliver
oli.r said:
Hi,
here is another one, based on the epinter-source 10.1, working for me. I installed it 10 days ago, using it daily.
http://forum.xda-developers.com/showthread.php?t=2292347
Especially WiFi and Bluetooth are working.
What does not work is Speech-to-text for most apps while Google Voice is working.
On my MB860 I reach about two days while "light" usage between charging.
Hope this helps,
BR
Oliver
Click to expand...
Click to collapse
thank you very much oli.r
I am downloading now, I'll try at tonight or tomorrow. did you install rom of the first post?
also, does it display vibrrate?
Optimus White said:
thank you very much oli.r
I am downloading now, I'll try at tonight or tomorrow. did you install rom of the first post?
also, does it display vibrrate?
Click to expand...
Click to collapse
I ended up with a file called:
SmarT LighT RoM v1.2.3 ______ 1.zip
and
GApps 4.2.2 Minimal.zip (GoogleApps)
Do a factory reset before flashing and reboot between flashing the ROM and the apps.
Good luck!
Oliver
Optimus White said:
also, does it display vibrrate?
Click to expand...
Click to collapse
Forgot about that...Yes, it does...
oli.r said:
Forgot about that...Yes, it does...
Click to expand...
Click to collapse
I installed kernel-cm10.1-20131108_0246-epinter-olympus-hporch32 and vibrate problem was resolved. but I do not know what is the battery performance of this kernel than the other. also, camera perpormance is not good, flash don't work
oli.r said:
Forgot about that...Yes, it does...
Click to expand...
Click to collapse
I want try kernel-2014_03_27_16_06_cm10_1.zip but I can not find download link. can you help me?
Optimus White said:
I want try kernel-2014_03_27_16_06_cm10_1.zip but I can not find download link. can you help me?
Click to expand...
Click to collapse
No idea, sorry, didn't changed that.