I HAVE A I9300 4.2.2 STOCK ROOTED AND CLOCKWORK WHAT KERNEL IS GOOD FOR OVERCLOCKING?AND SORRY FOR STUPID QUESTION....ODIN KERNEL FOR 4.2.2 STOCK PERFERED
I use the siyah kernal, which allows you to over clock and also dual boot roms, which makes it popular. I am not sure if it supports 4.2.2 roms you would need to check his forum page. I haven't had any problems with it, I am on stock 4.1.2. How this helps.
Sent from my GT-I9300 using xda app-developers app
raylusion said:
I HAVE A I9300 4.2.2 STOCK ROOTED AND CLOCKWORK WHAT KERNEL IS GOOD FOR OVERCLOCKING?AND SORRY FOR STUPID QUESTION....ODIN KERNEL FOR 4.2.2 STOCK PERFERED
Click to expand...
Click to collapse
Why Caps we can read .
What is an Odin kernel ???? do you mean a stock kernel ????
No sources for 4.2.2 released = no development yet .
jje
Related
Is the emmc bug for sgs2 on leaked 4.0.4 rom only? Or is 4.0.3 affected? Thanks
sent from my GT-I9100
»stock GB samsung
»n.e.e.kernel
grasp android a little bit XD
droidstarxx said:
Is the emmc bug for sgs2 on leaked 4.0.4 rom only? Or is 4.0.3 affected? Thanks
sent from my GT-I9100
»stock GB samsung
»n.e.e.kernel
grasp android a little bit XD
Click to expand...
Click to collapse
Only leaked 4.0.4 Kernels with the MMC_ERASE_CAP enabled. No 4.0.3 kernel is affected.
If you have flashed a 4.0.4 leaked ROM, either flash Siyah Kernel to wipe, or flash a 4.0.3 ROM in ODIN (not Mobile ODIN).
P.S. This has been covered in so many threads, if you had searched for five seconds you would have found your answer. Get used to searching.
themadba said:
Only leaked 4.0.4 Kernels with the MMC_ERASE_CAP enabled. No 4.0.3 kernel is affected.
If you have flashed a 4.0.4 leaked ROM, either flash Siyah Kernel to wipe, or flash a 4.0.3 ROM in ODIN (not Mobile ODIN).
P.S. This has been covered in so many threads, if you had searched for five seconds you would have found your answer. Get used to searching.
Click to expand...
Click to collapse
also its on non leaked 4.0.4 just to be clear i think its on all 4.0.4 kernels.
Sent from my GT-I9100 using Tapatalk 2
Thanks for the response brothers. Because of this emmc bug i will not upgrade my cellphone, also my current setup (for me) i think is fast , stable and battery ++++. Haha
Siyah kernel + checkrom revo hd v6
No any voltage uc /oc. And it is very fast.
Sent from my GT-I9100 using xda premium
Hi there!
I am wanting to update my Samsung Galaxy GT-i9300 but am worried about the process because of having installed a custom kernel previously (would this muck up installing a new custom rom I wonder..)
Please find attached a screenshot of the settings and please tell me what I should do (if anything needs done) before I flash a new custom rom.
Cheers!
if you're worried about kernels, then just flash stock kernel then flash a custom rom on it.
mputtr said:
if you're worried about kernels, then just flash stock kernel then flash a custom rom on it.
Click to expand...
Click to collapse
kk, could you provide me with a suitable stock kernel (or links to one) which will be compatible with the rom I have installed?
any stock kernel that is for jb will be fine.
Sent from my GT-I9300 using xda app-developers app
mputtr said:
any stock kernel that is for jb will be fine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I am on android version 4.0.4 (so technically not JellyBean). and its safe to flash a stock kernel for JB despite being on that version before I flash a custom rom?
Sorry for asking, get confused easily..
you should be fine updating with a custom kernel (as all roms flash a kernel as well). Just make sure you factory reset when moving from ics to JB as you will most likely encounter problems if you don't.
Sent from my GT-I9300 using Tapatalk 2
Asimo2012 said:
I am on android version 4.0.4 (so technically not JellyBean). and its safe to flash a stock kernel for JB despite being on that version before I flash a custom rom?
Sorry for asking, get confused easily..
Click to expand...
Click to collapse
I would suggest flashing ICS stock kernel first if you're worried. I thought you were already on jb.
Sent from my GT-I9300 using xda app-developers app
Easy
Reflash the stock ics ROM
And flash any custom ROM you want
Enjoy
Sent from my GT-I9300 using xda premium
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
ssbnasa said:
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Error status code 7 when flashing ROMs usually means the install script failed an assert when trying to determine if you have the correct model of phone that the ROM is intended for.
Where did you download the copy of CM10.1 from? Are you sure that it is for your model of phone? According to your signature, you have an I9100. Are you sure you didn't download CM10.1 for I9100G, for example?
ctomgee said:
Error status code 7 when flashing ROMs usually means the install script failed an assert when trying to determine if you have the correct model of phone that the ROM is intended for.
Where did you download the copy of CM10.1 from? Are you sure that it is for your model of phone? According to your signature, you have an I9100. Are you sure you didn't download CM10.1 for I9100G, for example?
Click to expand...
Click to collapse
Yeah, I think i chose the correct copy and that was too from cm 10.1 thread.
Anyways, if I was wrong. Can u provide me with proper links for cm10.1 for my device? It'll be very helpful of u
Currently I'm running rooted xxlsj jb fm
Sent from my GT-I9100 using xda premium
ssbnasa said:
Yeah, I think i chose the correct copy and that was too from cm 10.1 thread.
Anyways, if I was wrong. Can u provide me with proper links for cm10.1 for my device? It'll be very helpful of u
Currently I'm running rooted xxlsj jb fm
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
https://www.google.com/search?q=cm10.1+xda+i9100
ssbnasa said:
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
TheATHEiST said:
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
Click to expand...
Click to collapse
Thx, I didn't know this about Philz... Mainly because I'm avoiding JB until Samsung releases an official version.
TheATHEiST said:
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
Click to expand...
Click to collapse
But I'm not using philz kernel, I never flashed it..
I just flashed this leaked firmware few days back.. That's it!!
Anyways, but most of them say to not use siyah kernel with cm 10.1... Rather use dorminax kernel with it, what you say about it?
Sent from my GT-I9100 using xda premium
Hey
Flash dorimanax but don't boot and then flash cm10.1
Regards,
Paulius
Spoiler
XDA the best
Just about to flash a ROM on my S3 (first time), and I'm just asking are different version ROMs compatible with the stock version ROM? e.g: I have a s3 running Jellybean 4.1.1 (stock) but can I flash a different ROM that's made for ICS?
Thanks
Mountain_Lion said:
Just about to flash a ROM on my S3 (first time), and I'm just asking are different version ROMs compatible with the stock version ROM? e.g: I have a s3 running Jellybean 4.1.1 (stock) but can I flash a different ROM that's made for ICS?
Thanks
Click to expand...
Click to collapse
Just make sure, that your s3 version is made for the rom. If so you should be able to flash all roms. Why would you want to go back to ics?
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Just make sure, that your s3 version is made for the rom. If so you should be able to flash all roms. Why would you want to go back to ics?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
When you mean s3 version do you mean like GT-i9300 etc.? And so if it was made for that (GT-i9300), I would be able to flash any ROM?
yes
Hello
I'm running cyanogenmod 9.0.0 and I want to dual boot with another from using siyah kernel but whenever I flah it it boots up shows the kernel logo and just stays black!
Sent from my GT-I9300 using xda app-developers app
Well if you read and searched properly you'd know that dual booting doesn't work on ICS...
...and also, no ICS ROM or Kernel can be considered safe from Sudden Death Syndrome...
rootSU said:
...and also, no ICS ROM or Kernel can be considered safe from Sudden Death Syndrome...
Click to expand...
Click to collapse
Siyah kernel doesn't work with 4.2.1 leak or cm 9 .... update to cm 10.1 and it will work 100%
joshua101 said:
Hello
I'm running cyanogenmod 9.0.0 and I want to dual boot with another from using siyah kernel but whenever I flah it it boots up shows the kernel logo and just stays black!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
when you start flashing roms on your phone, you should be aware of what you are doing. how could you be so silly? under siyah kernel it is already said that dual boot is only for sammy JB 4.1.2 and CM10 and above.
note:the thanks i clicked for you was accidental!
Hello everyone one yes your right stupid of me!
Sent from my GT-I9300 using xda app-developers app
Syah kernel + NeatROM 4.2.2 ?
hany kesho said:
Siyah kernel doesn't work with 4.2.1 leak or cm 9 .... update to cm 10.1 and it will work 100%
Click to expand...
Click to collapse
So does it mean siyah still does not have support for any ROM above 4.2?
I'm currently using 4.2.2 NeatROM and I've just tried Siyah 1.8.6 - 1.9.1 and none of them works
3rothebassman said:
So does it mean siyah still does not have support for any ROM above 4.2?
I'm currently using 4.2.2 NeatROM and I've just tried Siyah 1.8.6 - 1.9.1 and none of them works
Click to expand...
Click to collapse
No samsung rom over 4.1.2 but siyah 1.9.1 most definitely works on cm / aokp /aospa 4.2.2 roms
Sent from my GT-I9300 using Tapatalk 2