Hey all,
I thought my USB port was broken given that it didn't charge and I couldn't connect it to the PC.
So I bought a nice one and replaced it.... no dice. Still doesn't work. However, the odd thing is, I also bought a USB jig and that does work. Anyone got any clue what could be going on?
Cheers
Maybe the wrong USB board, there's a couple of different ones, best way to work it out is match up with the one already in the phone. Search for similar threads in Q&A over the past few mths; there's been detailed discussions (and pics from memory) of which board is which.
Check on this thread.....
http://forum.xda-developers.com/showthread.php?t=2335961
it might help.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
USB Connectivity Problem
mirey said:
Hey all,
I thought my USB port was broken given that it didn't charge and I couldn't connect it to the PC.
So I bought a nice one and replaced it.... no dice. Still doesn't work. However, the odd thing is, I also bought a USB jig and that does work. Anyone got any clue what could be going on?
Cheers
Click to expand...
Click to collapse
As you said that even after replacing the port.... it didnt work. And it worked out after you connected it to your new USB jig. This means that there might be a problem with the original USB wire which comes with phone when you Buy it. It might even be a problem with the Connectivity Board in the phone as it must have been damaged. I'm not really sure about this but it might even be a problem with software... Maybe you should have tried to atleast wipe the whole system... maybe then you would get to know more about the problem.
Cheers
heh, yeah, I did check that and ordered a 2.2, but they sent me a 2.3.
However, I stuck my old 2.2 one back in, and tried it with the jig, and the jig works :S
So no my USB doesn't work, but the USB jig does... that's really got me confused
EDIT: Yeah, I did think about software, so I tried to install a different ROM and then I got scared and thought I bricked the phone (it didn't like that wrong USB version was there I guess). I'll see how that goes.
I tried a different cable. The weird thing is it sort of slowly died, and I had to stick the cable in at a weird angle and stuff, so that's why I thought it was the USB port.
As I understand it, there are 5 (?) connectors in the socket. Each connector when paired with the common or ground contact (probably the shielding on the outside of the socket) will perform a different task (that's probably an over simplification of the sockets functionality.........but you get the idea)....eg/ data transfer in, data transfer out, charging, jig resetting, usb docking, usb otg.....that sort of thing.
When you get the situation you're in, it simply means that the relevant connector for the required task is damaged or worn out.....but that doesn't mean that ALL the connectors are affected.... ..that is why some functions work while others don't.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Related
I haven't seen any similar threads and I'm sorry if there is already an existing one.
My X10 USB port has suddenly gone wonky. At first the phone had no problems charging, but when trying to connect to the computer, the cable had to be held in a certain position or it would not connect. This later began to affect charging as the usb cable had to be held in a certain position to charge. Now even after wiggling around the USB cable and reinserting the battery, the phone will not charge.
Given that the USB port used to work while being held in a certain position, it seems that this is a hardware issue. After finding nothing here, I searched the interwebs and found that poorly soldered USB ports are actually a fairly common problem on the X10.
I was wondering if anyone else has experienced this problem or has any insights?
tinythetiger said:
I haven't seen any similar threads and I'm sorry if there is already an existing one.
My X10 USB port has suddenly gone wonky. At first the phone had no problems charging, but when trying to connect to the computer, the cable had to be held in a certain position or it would not connect. This later began to affect charging as the usb cable had to be held in a certain position to charge. Now even after wiggling around the USB cable and reinserting the battery, the phone will not charge.
Given that the USB port used to work while being held in a certain position, it seems that this is a hardware issue. After finding nothing here, I searched the interwebs and found that poorly soldered USB ports are actually a fairly common problem on the X10.
I was wondering if anyone else has experienced this problem or has any insights?
Click to expand...
Click to collapse
this happened to me too, are you using the usb that came with your phone? because when mine broke i bought a new cable and everything worked fine so try the cable on a different phone and see if it charges
Sent from my X10a using XDA App
I have tried 3 different USB cables, including the one that is included with the phone. Thanks for your input.
My last x10 went down the same way. I had to buy an external battery charger which was a royal pain. SE refused all knowledge of this defect.
tinythetiger said:
I have tried 3 different USB cables, including the one that is included with the phone. Thanks for your input.
Click to expand...
Click to collapse
whoa not cool how long have u had your device?? will se fix it?
Sent from my X10a using XDA App
The problem is most likely due the actual design of the phone, where the USB connector is not properly strain-relief. This causes the solder joints to break, and ripping off the solder pads after a while. You used to be able to charge your phone because the pads very only "lifted" but after a while they become completely broken. I'm currently still in the process of trying to figure out whether it would be possible to repair those connections by finding an alternate location to solder the connector pins.
I've had my x10 since April when it launched. Other than this it has been rock solid, but this is really disappointing considering how tank my old W810i was.
I also think that there is either a problem with the design or the manufacture of the phone because it's somewhat common, as it does appear that the soldering of the USB port is not very good.
Looking around the internet, it doesn't seem like SE acknowledges this problem, but luckily it's still under warranty with Rogers for a replacement. I still want to get this issue out on this forum though, because I think it should be something that people are aware of.
I had the same problem a while ago. Called Orange France and they replaced my phone without any comments. If your phone is still under warranty you should go to your provider.
Hey guys. I need help returning my x10 back to stock without a usb cable. I have an AT&T x10a, but unfortunately the other day one of the pins in my usb module (ground, I believe-pin 1) snapped off. I can't charge or connect my phone at all.
Is there any way of flashing the phone back to stock AT&T firmware using like a terminal emulator so I can send it back to AT&T? Btw - the phone is running Nordic 2.1 and it's rooted. Thanks for anyone who can help.
Sent from my X10a
I was looking through the forums for a method like this too but couldn't find one so far. Perhaps you could figure out what makes it look like it's on stock firmware:
i.e. change the boot screen, change the model to x10a, unroot and make it look as much as possible like stock.
Look at the "broken usb connector" thread
Sent from my X10i using XDA App
My SGS2 keeps disconnecting and reconnecting the usb with my computer. This is hapenning for quite a long time now.
I keep hearing the windows connect/disconnect usb sound when my phone is plugged in, making it unable to recognize the device.
Today, it finally didn't had this problem for a while, so I took my chance to get back to stock ROM (because I need to send my phone to Samsung for camera problems). So I flashed stock ROM with ODIN, but I encoutered a problem: it didn't get further than the boot animation.
When I tried to reflash, ODIN didn't recognize my phone anymore, just like before. When I plug in my SGS2 to my computer while on download mode, it just keeps reconecting the USB, so the device can't be installed.
Tried a different computer. It kept being connected, but that comp sucks and it couldn't recognize my phone at all. My own computer also has problems recognizing the SGS2, but also has the problem that it can't stay connected.
Things to know:
- Other usb devices do stay connected, it's just for my sgs2
- I've tried different USB hubs etc., reinstalling Kies, uninstalling drivers.
- It does keep charging the phone, even when the computer makes the disconnect sound. That makes it even weirder!
Basically I'm seriously out of clues how to revive my phone
I don't want to send it to Samsung, scared of losing warranty.
You guys are my last hope!
to start the ball rolling, YOU SHOULDNT BE connecting sgs2 to a HUB, thats probably the fault, second, have you tried a different usb lead or a different computer with the same lead to either verify if its the phone or lead at fault??
No one on here can answer your question because it sounds like a hardware issue, wire or hub or charger port, but it is an elimination process and only you can do that.
If you try everything and still get no joy, restore your pc to an earlier point, uninstall the samsung drivers and re-install them etc etc.
I very much doubt its a software problem tho, looking at what you tried already, lots of people use hubs, if youre flashing roms and your connected to a hub then ya play a dangerous game and risk soft bricking your phone, most of the time odin wont recognise your phone through a hub, same if ya usb lead is too long, itll charge but no data. always connect it directly to the pc usb 2 port.
gazza35 said:
to start the ball rolling, YOU SHOULDNT BE connecting sgs2 to a HUB, thats probably the fault, second, have you tried a different usb lead or a different computer with the same lead to either verify if its the phone or lead at fault??
No one on here can answer your question because it sounds like a hardware issue, wire or hub or charger port, but it is an elimination process and only you can do that.
If you try everything and still get no joy, restore your pc to an earlier point, uninstall the samsung drivers and re-install them etc etc.
I very much doubt its a software problem tho, looking at what you tried already, lots of people use hubs, if youre flashing roms and your connected to a hub then ya play a dangerous game and risk soft bricking your phone, most of the time odin wont recognise your phone through a hub, same if ya usb lead is too long, itll charge but no data. always connect it directly to the pc usb 2 port.
Click to expand...
Click to collapse
Ow, I think I used the wrong word. I meant to say port instead of hub.. Translation fail there. So that's not the problem, I've put the cable directly into the USB port.
I think you are right about the hardware problem. I'm just not sure where the problem is. I only have one cable, so I can't test that atm. But like I said, the connection problem does NOT occur on another computer. It keeps the device connected (as an unknown device though).
So it's weird: it looks like a SGS2 hardware problem, but on the same time it has a different problem on a different computer. It's really confusing...
Thanks for the quick reply by the way
sebas156 said:
Ow, I think I used the wrong word. I meant to say port instead of hub.. Translation fail there. So that's not the problem, I've put the cable directly into the USB port.
I think you are right about the hardware problem. I'm just not sure where the problem is. I only have one cable, so I can't test that atm. But like I said, the connection problem does NOT occur on another computer. It keeps the device connected (as an unknown device though).
So it's weird: it looks like a SGS2 hardware problem, but on the same time it has a different problem on a different computer. It's really confusing...
Thanks for the quick reply by the way
Click to expand...
Click to collapse
Android Sync manager Wifi is the answer you're looking for ^^
no more plugging in this... mounting that...
NB, has a pc side component
King_Rat said:
Android Sync manager Wifi is the answer you're looking for ^^
no more plugging in this... mounting that...
NB, has a pc side component
Click to expand...
Click to collapse
Then please explain me how I could ever do that when there is no working ROM on my phone. I'm stuck on the 'restore with Kies' screen, like I told in my post (yes, still). And how it will ever work with ODIN? It won't...
Now not any computer is connecting with my sgs2. It just doesn't show anything (not even unknown device). I'm going to try to buy a new cable. Is it needed to buy a Samsung cable? Because it's harder to find than just a regular usb to micro usb cable (and more expensive ). This is my last hope. When it's not working, I need to send it to Samsung.
sebas156 said:
Then please explain me how I could ever do that when there is no working ROM on my phone. I'm stuck on the 'restore with Kies' screen, like I told in my post (yes, still). And how it will ever work with ODIN? It won't...
Now not any computer is connecting with my sgs2. It just doesn't show anything (not even unknown device). I'm going to try to buy a new cable. Is it needed to buy a Samsung cable? Because it's harder to find than just a regular usb to micro usb cable. This is my last hope. When it's not working, I need to send it to Samsung.
Click to expand...
Click to collapse
You need to replace your usb board within your phone. New part can be found on ebay for around $10. It's a really simple task replacing it. No soldering or anything.
It's been well documented on these boards.
Sent from my GT-I9100 using Tapatalk 2
The problem:
I can't get into download mode, when turn off the phone and connect it to USB or WALL charger it automatically boot the phone instead of show the battery charging image
The PC doesn't recognize it (tried many drivers), nothing happens its like I've never plugged it in!!! no messages, no icons NOTHING it just charge
What I've tried:
3 different usb cables
3 different PC (all usb ports)
3 Different galaxy s
Debuggin mode on/off thing
A lot of drivers
Also disassembled the phone to see if something as wrong with the usb port and everything seems in order.
Specs:
Stock 2.1-update1
T959UVKA2
Kernel 2.6.29
ECLAIR.UVKA2
Update 07/21/2012
using the sd card adapter mounted a update.zip called Overstock (It'll have a lock screen loop) but fortunately I comes with CWM and i had a ROM called [ROM][2.2 Froyo][Stock] T959UVKB5 [Deodexed w/Lockscreens+Power Menu] .It has a power menu where I can acces to the download mode but the problems stated above persist.
i cant believe this a hardware problem because it charge normally but this's going me crazy
HEEELP PLEASE!!
Because of this I cant even odin soo I dont know what to do
Early I opened the phone again to check usb port and connections, everything seems to be ok... Installed a ICS ROM called SLIM and have the same problem sooo it has to me a hardware problem T_T but there are no usb port pins loose!!! if nobody have something to add I officially give up here...
inmortal009 said:
Early I opened the phone again to check usb port and connections, everything seems to be ok... Installed a ICS ROM called SLIM and have the same problem sooo it has to me a hardware problem T_T but there are no usb port pins loose!!! if nobody have something to add I officially give up here...
Click to expand...
Click to collapse
I'm not sure what else you can do. For me personally the only usb data cable that works for me is the one from the Tmobile store. I have 2 cables from amazon.com and my old usb cable. None of them work for some reason but they do work with my friends vibrant (weird). If a cable from tmobile doesn't work then the data pins on your usb port could be damaged while your charging pins are still ok( this happens). Tmobile has a 30 day return policy on the $15 usb cable so give that a try if you haven't already. If you end up having to replace your usb port I recommend www.mobiletechvideos.com, lots of users have had success with them in the past.
Sent from my SGH-T959 using xda premium
i just fixed it!! :laugh: :laugh: :laugh:
Today I disassembled the cellphone for 3rd (I would be the last) time and clean with cotton and a lot of alcohol the USB port, removed the dust and scraped the terminals. Anyhow thanks and you know, never give up :good:
inmortal009 said:
i just fixed it!! :laugh: :laugh: :laugh:
Today I disassembled the cellphone for 3rd (I would be the last) time and clean with cotton and a lot of alcohol the USB port, removed the dust and scraped the terminals. Anyhow thanks and you know, never give up :good:
Click to expand...
Click to collapse
Nice job, glad your up and running again.
Sent from my SGH-T959 using xda premium
inmortal009 said:
i just fixed it!! :laugh: :laugh: :laugh:
Today I disassembled the cellphone for 3rd (I would be the last) time and clean with cotton and a lot of alcohol the USB port, removed the dust and scraped the terminals. Anyhow thanks and you know, never give up :good:
Click to expand...
Click to collapse
Any chance you could be more specific?
I am in the same boat friend, and I'm not even remotely sure how to go about cleaning a usb port @[email protected]
A month or two ago I started experiencing problems while connecting my S2 to the PC or laptop using the data cable.
When I connect the cable to my S2 on the PC or laptop it comes up with the balloon messages in the system tray:
USB device not recognised.
Then a short while later it comes up with another balloon message:
This device can perform faster.
Sometimes while transferring data, it will disconnect and the file transfer fails.
Sometimes if the cable is moved slightly it will cause the device to disconnect from the PC.
And, of course, the file transfers are much slower than they should be and much slower than they used to be.
GT-I9100 Rooted.
I9100XXKKI3
Gingerbread 2.3.6 Stock (Frankenstein)
I haven't touched any ROM or flashed anything on this in like over 8 months so it's nothing to do on that front.
I removed micro SD card and tried reconnecting again, still the same problem.
I've tried different computers, still the same problem.
I've used different cables, still the same problems. Tried enabling and disabling USB debugging. Same problem still remains.
The USB cables and computer and laptop work fine with my S3.
All the correct drivers are installed for the S2.
I'm resigned to thinking it's a hardware issue as I've exhausted other options. Is there a simple fix or will this need sending back to Samsung?
I've had the phone over a year now but someone told me the warranty is two years?
All help appreciated guys. Thanks in advance.
Why don't you upgrade to ICS?
przemcio510 said:
Why don't you upgrade to ICS?
Click to expand...
Click to collapse
Probably because his USB port doesn't currently work properly.
@OP, this is often caused by a dirty or faulty USB port. You can try cleaning it, but you may need to replace it.
Try cleaning it out with a dry toothbrush first.
If that doesn't work, take the battery out, and try cleaning the port with a small q-tip with a small amount of isopropyl alcohol; let it dry for a while after that, then replace the battery.
If THAT doesn't work, you'll probably need to replace the part for the USB port.
If your warranty is still good, you could try to go that route, but you'll need to unroot your phone. Otherwise, I've heard it runs about $15 for the part, and you can replace it yourself. If you don't feel up to it, you can have a cell repair shop or Samsung service center do it for you, but it will probably be significantly more expensive than $15.
My opinion based on your description is the USB socket on the phone is wearing out/damaged. The USB socket is on a small circuit board separate from the main logic board. It's easy to replace and the part is cheap on EBay. Search for a disassembly/tear down video and judge whether you can do it yourself.
Sent from my GT-I9100P using Tapatalk 2
Thanks for the very quick responses guy. They were very thorough as well.
I will look into cleaning the port and if it still doesn't work I'll consider having it repaired. My soldering skills were excellent but I haven't done it for a few years, so may leave it in someone else's hands.
I haven't upgraded to ICS as I was very happy with my phone at the time. Also, a couple of friends who had upgraded to ICS on their S2 regretted it due to numerous problems, which put me off upgrading.
You can still use mobile odin and theres no soldering needed with the usb,it comes as a board with a ribbon cable.
Sent from my GT-I9100 using xda premium
theunderling said:
You can still use mobile odin and theres no soldering needed with the usb,it comes as a board with a ribbon cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I've had a look on the Samsung website here:
w ww.samsung.com/uk/support/warranty/warrantyInformation.do?page=POLICY.WARRANTY
It seems as though the warranty period on my phone is 24 months so I might just get it done via Samsung.
I'll contact them in the morning and see where I stand. If not, then the replacement USB board connected by a simple ribbon cable sounds like a doddle. I've seen a grade A condition part on ebay for about £8 delivered.
Thank you once again.
Communist99 said:
A month or two ago I started experiencing problems while connecting my S2 to the PC or laptop using the data cable.
When I connect the cable to my S2 on the PC or laptop it comes up with the balloon messages in the system tray:
USB device not recognised.
Then a short while later it comes up with another balloon message:
This device can perform faster.
Sometimes while transferring data, it will disconnect and the file transfer fails.
Sometimes if the cable is moved slightly it will cause the device to disconnect from the PC.
And, of course, the file transfers are much slower than they should be and much slower than they used to be.
GT-I9100 Rooted.
I9100XXKKI3
Gingerbread 2.3.6 Stock (Frankenstein)
I haven't touched any ROM or flashed anything on this in like over 8 months so it's nothing to do on that front.
I removed micro SD card and tried reconnecting again, still the same problem.
I've tried different computers, still the same problem.
I've used different cables, still the same problems. Tried enabling and disabling USB debugging. Same problem still remains.
The USB cables and computer and laptop work fine with my S3.
All the correct drivers are installed for the S2.
I'm resigned to thinking it's a hardware issue as I've exhausted other options. Is there a simple fix or will this need sending back to Samsung?
I've had the phone over a year now but someone told me the warranty is two years?
All help appreciated guys. Thanks in advance.
Click to expand...
Click to collapse
This is a Cable problem. The USB port of your device is wider now, that's why the cable doesn't fit well. Buy a micorUsb cable for blackberry, it's always very full and thick, then use it to connect your phone. The issue should be resolved.
I once had the same problem with my Nokia N8 and using a Samsung cable (which looks fuller and thicker) solved it.
Yeah warranty should be 2 years BUT youll have to unroot it first if your sending it to them.
They may also wipe your phone and stick on 4.0.4.
If you get the board yourself,check the number is going to be the same i.e the spare one I have here is GT-I9100 rev2.2.
Also other people have got a replacement board and the mic doesnt work(think the boards are sold as refurbished).
So its up to you which option you go for.
Sent from my GT-I9100 using xda premium
Hi,
Having a problem since a few weeks with my s3.
Normally i could connect wiht my phone to any pc,, without any problems. Either it be unix, win, whatever...
Suddnely it stopped working, only thing that happens is charging when i connect it to my pc. Different cables tested, original one, etc..
Connecting it to different pc's resulted in a no go.. so it must be phone related.
No windows pop up, or anything!!
So I figured: Let's install a new rom.
Tried ultima 15 rom, got a different CM rom now (sentinel)... all to no avail.
Is it possible that this has something to do with my radio?
rom info:
android: 4.3
baseband: CEEMG2
Anyone have an idea what to do? Even ADB push ain't working..
See your identical post
I experienced the same problem when m using the Galaxy Nexus S But it was solved by using the app from play store named SD booster... In this app m just set the value of sd card to 1024 give root access and Boom my phone is connected as normal
If this not help then i seriously recommend you to replace the charging port of the mobile through samsung outlet
Go into developer settings, some ROMs may have different ways to get into develop er setting and after you get in make sure USB debugging is enable ^.^
Sent from my SPH-L710 using XDA Premium 4 mobile app
Usb debugging is not required for phone to pc connection see basic faqs and guides .
But as OP has ruled out drivers and cable that only leaves the phone so its worth trying .
Usual replies are
Drivers
Cable
Dirty USB Ports
Not connected to main-board usb port .
I had same issue with my Galaxy SII and when i took it to service center they said mother board needs to be replaced.
So after that SII was good as new.
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
hani93 said:
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
Click to expand...
Click to collapse
if anybody interested:
i've got it working again :victory:
basically, the problem was the hard way (crap usb data connections on motherboard)
soldered new ways for data+ and data-, and now it's back alive again...
(pictures of ways in attachment)
Martin
see you fixed it already but a note to others :
try using usb port right on the motherboard instead of the case front panel usb ports.....connecting to the front usb ports didn't work for me on some roms, but the rear one always connected so I just have a long cable running out of the back to connect my phone and it works on all roms I've used so far
Nice work hani93, i unfortunately do not dare to desolder and solder this stuff
I've noticed another thing though which is weird!!
When i tried to charge my phone via the power charger (the ac one?), when i check my battery view it still says that i'm charging via USB.
I don't think this is correct, i thought it should say AC or something and when charging via USB port on pc it should display USB?
I think this might be one of the issues that it's also not popping up on the computer.
Anyone know what is causing this or someone can confirm that when charging via power supply it should say something else then USB?
Just confirming your question when charging by PC it says (USB) and when its charging from the Mains it says (AC).
hmmm... guess it must be a hardware issue then?
Either usb port or mainboard... christ...
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Morbie said:
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Click to expand...
Click to collapse
try to go into Download mode (volDown+Home+Power) and then connect usb, same situation?(eg, no data connection to pc ?)
if nothing again.. try to clean usb port inside (where you plug usb cable), sometimes there is dust and etc. then it stops working.
also, how did you clean contacts on motherboard ? i suggest to take soldering iron with clean bit, and drag iron along the pins.