Related
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Gahu said:
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Click to expand...
Click to collapse
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
SmG67 said:
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
Click to expand...
Click to collapse
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Gahu said:
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Click to expand...
Click to collapse
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
SmG67 said:
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
Click to expand...
Click to collapse
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Gahu said:
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Click to expand...
Click to collapse
I've updated mine whenever it requested it and in mine it is still there...
SmG67 said:
I've updated mine whenever it requested it and in mine it is still there...
Click to expand...
Click to collapse
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Gahu said:
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Click to expand...
Click to collapse
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
SmG67 said:
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
Click to expand...
Click to collapse
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Gahu said:
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Click to expand...
Click to collapse
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
SmG67 said:
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
Click to expand...
Click to collapse
OH yeah =)
So long to the Bootloop =D Thanks =)
Gahu said:
OH yeah =)
So long to the Bootloop =D Thanks =)
Click to expand...
Click to collapse
Good luck flashing m8 Keep it lying around, you can always get out of trouble
SmG67 said:
Good luck flashing m8 Keep it lying around, you can always get out of trouble
Click to expand...
Click to collapse
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
SmG67 said:
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
Click to expand...
Click to collapse
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Kubaz said:
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Click to expand...
Click to collapse
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
SmG67 said:
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
Click to expand...
Click to collapse
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Kubaz said:
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Click to expand...
Click to collapse
The 'Apply Update.zip' does exactly the same thing as the 'Install zip from sd-card', but the first option only works for zip-files named 'update.zip' in the root of your sd-card, the second option will let you browse the sd-card and select a zip-file with any name. The second option is the one you use to install your ROM.
Restoring from nandroid, just fills your internal phone-memory with the old stuff you had in there, it won't affect your sd-card, other than that it reads the nandroid from that sd-card.
Your sd-card needs to be formatted with the fat-filesystem to work properly, so partitioning or not makes not much of a difference, only that the available space for your stuff (music, photo's, etc.) is less because the other partitions take up space too.
If you can flash your ROM in CWM from sd-card I don't really see any problem with your sd-card.
worked like a charm. many thanks!
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
"Alternatively, on start up, I can get into cwm recovery".
I have the exact same problem though i cant get into clockworkmod recovery. May i know how you got into cwm recovery? Any help is appreciated.
Thanks!
Hello kind sir,:highfive:
My phone is the xperia sola i rooted it alright,but i wanted to play MC3 on it and apparently i had to modify the system.prop,the game worked fine ,Later on i installed Chainfire,I installed its driver but the phone was STUCK on the boot screen(Sony),I was able to access the CWM i wiped EVERYTHING data,system... But yet NOTHING THE PHONE WAS still stuck on the sony screen...Any help here?...Since i have modified the system.prop i cannot reinstall my rom,I will need a modified Rom's system.prop to match with mine,I changed the system.props value to those of Galaxy nexus S,the other settings remained untouched I dont know WHAT TO DO,any help will be Very VERY VERY welcome
I modified the .prop accordingly to these instructions: I CANT POST THE LINK :/
You wiped system, which means you erased your whole ROM AND you wiped data which means you erased the rest. You need to reflash to stock with flashtool and your data is now lost and can't be recovered.
K900 said:
You wiped system, which means you erased your whole ROM AND you wiped data which means you erased the rest. You need to reflash to stock with flashtool and your data is now lost and can't be recovered.
Click to expand...
Click to collapse
Yes i am aware of that fact..Flashtool will work for me since i have a custom system.prop?
Meateater21 said:
Yes i am aware of that fact..Flashtool will work for me since i have a custom system.prop?
Click to expand...
Click to collapse
You don't have a custom system.prop. You have a completely empty /system.
K900 said:
You don't have a custom system.prop. You have a completely empty /system.
Click to expand...
Click to collapse
Im glad i have a nice person to help me out with these Thank you
PS:downloading flashtool right now(im owrried a bit on how am i going to do this)
Can't you just enter recovery and flash rom again?
Sent from my Kang Phone
RomWiz said:
Can't you just enter recovery and flash rom again?
Sent from my Kang Phone
Click to expand...
Click to collapse
Well no,I tryed that and it says Installation aborted... :/ to the rom ...Soooo no
K900 said:
You don't have a custom system.prop. You have a completely empty /system.
Click to expand...
Click to collapse
Alright bro,
Downloaded flashtool now what? :s
Meateater21 said:
Alright bro,
Downloaded flashtool now what? :s
Click to expand...
Click to collapse
Download a stock firmware and flash it!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Download this
http://forum.xda-developers.com/showthread.php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
humza123 said:
Download this
http://forum.xda-developers.com/showthread.php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
Click to expand...
Click to collapse
Hmph i fixed with my own way,i edited a rom to mach with mine and the install was succcesful,even though when i install another rom the installation aborts but oh well,Everything is cool now thanks for your help:laugh:
Hello there!
This question might have appeared alot but I'll try to be as short and accurate as possible on the following:
About two weeks ago, I decided to root my Sony Live With Walkman (4.0.4 Ice cream sandwich) and now I'm thinking of installing Cyanogenmod 9 stable release. But I'll leave this mod for the last part and let us focus on the rooting process I've done.
I've used the following tutorial: talk.sonymobileDOTcom/thread/41119?start=0&tstart=0
At first, I was unsuccesful but in the second try I had managed to root my device (Unlocked bootloader).
Being a bit tired over the official Sony ICS, I thought of putting Cyanogen to my device. This is where the things get confusing for me:
I've spotted multiple tutorials and each one is different and unclear to me. These two are the ones I'm thinking of as the most reliable sources:
- wiki.cyanogenmodDOTorg/wiki/Sony_Ericsson_Live_with_Walkman:_Full_Update_Guide
- technologic101.wordpressDOTcom/2012/03/12/tutorial-how-to-install-cyanogenmod-9-0-ics-on-your-se-xperia-2011-device/
So, I have Cyanogen9 coconut, drivers, fastboot, google apps and proper FTF file downloaded.
But what now? Which tutorial is better and accurate for my state of device? Am I risking a brick by doing this? What are the current downsides of Cyanogenmod9 for this device?
Please, write your opinions, explain or link me to the proper guides for my case. I am grateful for any kind of information you give me!
Thanks!
First and foremost have you unlocked your bootloader?
Sent from a mango
andogeek10 said:
First and foremost have you unlocked your bootloader?
Sent from a mango
Click to expand...
Click to collapse
Yup, I did.
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
xhanafix said:
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
Is kernel the TFT file or the Cyanogenmod zip file (about 125MB)? And how do I flash this with Flashtool?
Boot.img inside the zip is the kernel. Extract and flash that file using fastboot. After flashing the kernel, start your phone and enter recovery. From recovery flash the zip files
Sent from my SK17i using xda app-developers app
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
In my signature, there's a guide how to install a custom rom/custom kernels, maybe this could help you!
I would use the cyanogenmod full update guide :good:
You don't need any ftf, you flash a custom rom with clockworkmod (cwm), but this should be explained in the guide
andogeek10 said:
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
Click to expand...
Click to collapse
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
aljazeek said:
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
Click to expand...
Click to collapse
Welcome.
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
aljazeek said:
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
Click to expand...
Click to collapse
No, just the fastboot drivers to flash the kernel. Go to flashtool installation folder > drivers and install all of them for all devices, that should be all :good:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
aljazeek said:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
Click to expand...
Click to collapse
Have you flashed a custom kernel?
Sent from a mango
andogeek10 said:
Have you flashed a custom kernel?
Sent from a mango
Click to expand...
Click to collapse
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
aljazeek said:
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
Click to expand...
Click to collapse
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
andogeek10 said:
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
Click to expand...
Click to collapse
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
aljazeek said:
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
Click to expand...
Click to collapse
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
andogeek10 said:
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
Click to expand...
Click to collapse
That didn't work. When the Sony logo gets brighter, a blue LED lights up for that moment.
In cwm, selecting 'Flash ClockworkMod Recovery' opens up a box where my phone model is displayed. After that, it says it's unsupported and I can manually select either 2.x or 3.x+. I've selected the 3.x+ one and in the menu it says 'Current Recovery: ClockworkMod 5.X.X.X
Shall I try with 2.x? I have no clue here.
System setting>about phone
Mind telling us your kernel version? From there we would know your current kernel
Sent from my SK17i using xda app-developers app
I was running CM 11 nightly 17 and then I wanted to go back to CM 10.1 RC1 so I flashed kernel and go to recovery to flash the rom but while going into recovery my phone reboot . I tried few times and phone still reboot while opening recovery. I can conect to my pc ( fastboot and flashmode )
But on every kernel I tried still the same my phone is stuck in a preety weird bootloop. Any Idea of what can I do ?
Thanks
ps. sorry for my english
toster jp said:
I was running CM 11 nightly 17 and then I wanted to go back to CM 10.1 RC1 so I flashed kernel and go to recovery to flash the rom but while going into recovery my phone reboot . I tried few times and phone still reboot while opening recovery. I can conect to my pc ( fastboot and flashmode )
But on every kernel I tried still the same my phone is stuck in a preety weird bootloop. Any Idea of what can I do ?
Thanks
ps. sorry for my english
Click to expand...
Click to collapse
Try to flash stock system or full rom.
How can I flash stock without usb debugging ?
And I can't do this with pc campanion or SUS because i run unoriginal software..
toster jp said:
I was running CM 11 nightly 17 and then I wanted to go back to CM 10.1 RC1 so I flashed kernel and go to recovery to flash the rom but while going into recovery my phone reboot . I tried few times and phone still reboot while opening recovery. I can conect to my pc ( fastboot and flashmode )
But on every kernel I tried still the same my phone is stuck in a preety weird bootloop. Any Idea of what can I do ?
Thanks
ps. sorry for my english
Click to expand...
Click to collapse
Which key did you use to enter recovery???
Moriarty82 said:
Which key did you use to enter recovery???
Click to expand...
Click to collapse
well I tried to enter recovery on few kernels. I tried pressing power button after the phone vibrate and on diffrent kernel volume down
BTW. I wanted my phone to turn off so I made a hard reset . Maybe my phone lock/freeze and I need to wait till battery dies ?
toster jp said:
well I tried to enter recovery on few kernels. I tried pressing power button after the phone vibrate and on diffrent kernel volume down
Click to expand...
Click to collapse
Its power up I guess....
Also you can flash ftf by force shut down and then connecting in flashmode.
Moriarty82 said:
Its power up I guess....
Also you can flash ftf by force shut down and then connecting in flashmode.
Click to expand...
Click to collapse
Can I flash ftf. file with usb debugging off ? Are you sure ?
Yes. It does for me (I use the official flashtool) but it should work with the other flashtool as well
Sent from my LT22i using XDA Premium 4 mobile app
toster jp said:
Can I flash ftf. file with usb debugging off ? Are you sure ?
Click to expand...
Click to collapse
Yes. Flashing fTF needs your device to be in "flashmode".
win
thank you very much guys I think I recover to stock
merry christmas everyone!
toster jp said:
thank you very much guys I think I recover to stock
merry christmas everyone!
Click to expand...
Click to collapse
Press Thanks instead of writing.
It cost less energy and time.
Merry Christmas to you too. :angel:
Hi,
I had flashing the SLD gaming CusRom, but I mistaken to installing the rom from micromax not the ported rom from this http://forum.xda-developers.com/len...rom-ported-sld-ultimate-gaming-p780-t276a9434 and all my life gone be wrong, my heart was sick because i can't entering the system 'n always bootloop whenever I install many rom, i can'
t mount my internal storage 'n data. :crying:
Urttee said:
Hi,
I had flashing the SLD gaming CusRom, but I mistaken to installing the rom from micromax not the ported rom from this http://forum.xda-developers.com/len...rom-ported-sld-ultimate-gaming-p780-t276a9434 and all my life gone be wrong, my heart was sick because i can't entering the system 'n always bootloop whenever I install many rom, i can'
t mount my internal storage 'n data. :crying:
Click to expand...
Click to collapse
Hi. I hope you have backup, because you must reflash base firmware.
stympy said:
Hi. I hope you have backup, because you must reflash base firmware.
Click to expand...
Click to collapse
where I can find the file? backup, for what?
Urttee said:
where I can find the file? backup, for what?
Click to expand...
Click to collapse
Backup of your system. You cannot find the file if you don allready have backup. For restoryng your settings ans system and... all.
stympy said:
Backup of your system. You cannot find the file if you don allready have backup. For restoryng your settings ans system and... all.
Click to expand...
Click to collapse
Can I flash via recov? I'm confused flashing via sp tools, is sp tools really need i-net connection? I alway fail to download with my mini speed.
Urttee said:
Can I flash via recov? I'm confused flashing via sp tools, is sp tools really need i-net connection? I alway fail to download with my mini speed.
Click to expand...
Click to collapse
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
stympy said:
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have TWRP 2.7 by Javum, but i can't flash the stock rom with it, is stock rom n stock firmware different?
stympy said:
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I try flash with SP FT, put the scatter file, check DA DL, check the preload with this path, but nothing happen, no progress bar appears (yellow,purple n red).
Urttee said:
I try flash with SP FT, put the scatter file, check DA DL, check the preload with this path, but nothing happen, no progress bar appears (yellow,purple n red).
Click to expand...
Click to collapse
You dont have the drivers installed or installed correctly.
Sent from my Lenovo P780
stympy said:
You dont have the drivers installed or installed correctly.
Sent from my Lenovo P780
Click to expand...
Click to collapse
where I can found the correct drivers? I try flahsing anothe device with SPFT, the purple bar appears when I click the firmware > upgrade, then I try combining button on my device, the red bar appear but before reach the green circle I unplug my device. And now my device dead, pressing the power button but no respond, I was charging the phone full of night yesterday before. Any solution
Urttee said:
where I can found the correct drivers? I try flahsing anothe device with SPFT, the purple bar appears when I click the firmware > upgrade, then I try combining button on my device, the red bar appear but before reach the green circle I unplug my device. And now my device dead, pressing the power button but no respond, I was charging the phone full of night yesterday before. Any solution
Click to expand...
Click to collapse
Here is the link: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12.
At the bottom of the page.
LenovoUsbDriver_autorun_1.0.10.zip
MTK_USB_ Driver GOOOOODDD.rar
stympy said:
Here is the link: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12.
At the bottom of the page.
LenovoUsbDriver_autorun_1.0.10.zip
MTK_USB_ Driver GOOOOODDD.rar
Click to expand...
Click to collapse
Hi stympy, I think the main problem is my usb driver, it can detecting, not showing the mtk 6.5.x.x , any idea?
Urttee said:
Hi stympy, I think the main problem is my usb driver, it can detecting, not showing the mtk 6.5.x.x , any idea?
Click to expand...
Click to collapse
'What windows do you use ?