I am using RAZR XT910.
Recently, I have installed a wrong rom.
Now, when I switch on the phone, it only shows the MOTO logo then a blank screen.
When I connect to PC, only does the LED turned on.
Nothing happened when I try to pass power+vol up+vol+down
So, in the other word, I can't enter boot loader mode nor recovery mode.
While I was using RSD lite, RSD can't recognize the phone.
What can I do?
Can anyone help me. I can't use my phone now!!!:crying:
Ya need to press vol down and vol up at the time and then power button.
Please hit that thanks button if i helped ya
anurag.dj2u said:
Ya need to press vol down and vol up at the time and then power button.
Please hit that thanks button if i helped ya
Click to expand...
Click to collapse
But i tried nothing happened
Did you try connecting the charger when the phone is off?
Does it show the charging battery animation?
Charge it fully and then try power+vup+vdown.
I got into this boot loop once but RSD Lite recognised the phone.
Sent from my Nexus 7 using xda app-developers app
nijom said:
Did you try connecting the charger when the phone is off?
Does it show the charging battery animation?
Charge it fully and then try power+vup+vdown.
I got into this boot loop once but RSD Lite recognised the phone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I once successfully boot into boot loader, but when I choose AP mode, it only hold for a short period
RSD can't recognise as well.
It can show battery animation, i mean the animation which show the current battery percent!
Thx
Arthur Wong said:
I once successfully boot into boot loader, but when I choose AP mode, it only hold for a short period
RSD can't recognise as well.
It can show battery animation, i mean the animation which show the current battery percent!
Thx
Click to expand...
Click to collapse
Do you have motorola drivers on your PC without them RSD cant recognise phone. You can find everthing there http://forum.xda-developers.com/showthread.php?t=1539192
Related
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
New Link
http://www.droidrzr.com/index.php/topic/2248-droid-razr-utility-16-contains-612181-fastboot-files/
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Great Job! Only wish that I knew about this 3 weeks ago! I took the back off and ended up glueing it back on and did a warranty exchange. I hope they don't say anything!!!
Again Great Job!!!!
Sent from my DROID RAZR using xda premium
pedrotorresfilho said:
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
As long as once it is plugged in and the screen comes up in the AP Fastboot it will work. Just hold power plues volume up and down then once that turns off immediatley press the volume up and down and it will boot you right to the boot menu. But just wondering what shows up for you if it is not the fastboot?
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
exactly. for those that got cut off as the phone was in the process of flashing, i dont think it will boot to any phone charging icon because there's no software on the device. I've been trying for a week now
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
dude your a life saver! thank you!!!
solution
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
mestisso79 said:
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
Click to expand...
Click to collapse
did you try the above tutorial? worked fine for me a couple hours ago
jaredakelly said:
did you try the above tutorial? worked fine for me a couple hours ago
Click to expand...
Click to collapse
Definitely didn't work. When that m logo comes up, it disappears and the screen goes off. The charging icon does not show.
Sorry for the late reply but it is good to hear this method to work for jaredakelly . For those who are having problems did you have the phone charging in the wall outlet and not on a computer usb? The best steps is to choose the the tools option then just let the phone boot to the m logo then just leave it there on the wall outlet. Make sure you are using the Motorola usb cable that came with your phone and its usb adaptor that might make a difference.
I just tried this tut and it works as far as I can tell I am at the screen for battery charging but there is a big "?" in the center, the phone doesnt know what level its at lol..
I suggest you space out and make your original steps in bigger and bolder text for the specific buttons because I almost missed the power + vol down + vol up and was just pressing the volume buttons
This thread should be stickied!
Yeah sorry if my instructions were not to clear this is my first time posting anything like this on this site, but I am glad to hear it is working for you too. I don't even have this phone lol , it was my friend's and he had it stuck on the fastboot so I messed around with it and in the end this was the result.
yep
i think my battery is too low to attempt this i got it on 3 times and tried to fastboot restore but battery kept dying before completion so i guess im just screwed
no you should be fine because as long as the power cable is still plugged in it should work regardless of the low battery level. I did this on my friend's phone with 0% battery.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
I have the same problem :/
This method worked for me! Your are the MAN OP!
Sent from my DROID RAZR using XDA
I think this should be stickied
Sent from my DROID RAZR using XDA
Well this got on xda front page
Sent from my DROID RAZR using XDA
Not a very good success rate for being on the front page. I'm going to try it later, though I think that I tried something like this before and it didn't work. I know that I have read this somewhere else.
I just flash from RSD lite... and it's fail.... (maybe because of low battery power)
I already recharge the battery full using external charger...
But now... mu photon Bricked.. I can't start the RSD mode (Power + Vol Down)
is there still any chance for it?
Thanks b4
Have you tried power + up? Does it give you any options when trying it? And are you in a boot loop or stuck at dual core screen?
Sent from my MB855 using XDA
hyem said:
I just flash from RSD lite... and it's fail.... (maybe because of low battery power)
I already recharge the battery full using external charger...
But now... mu photon Bricked.. I can't start the RSD mode (Power + Vol Down)
is there still any chance for it?
Thanks b4
Click to expand...
Click to collapse
Can you describe what the phone does? Does it turn on?
Sent from my Photon
I believe, the RSD mode is [Power+Vol Up].
In any case, take out your battery and reinsert it.
Press [Power+Vol Up] as soon as you insert the battery.
Report back on what happens.
Spmeone has tp unlock the boatloader for 2.3.5 in order to go back to sprint sbf. I woulnt get my hopes up if i were you
melon69 said:
Spmeone has tp unlock the boatloader for 2.3.5 in order to go back to sprint sbf. I woulnt get my hopes up if i were you
Click to expand...
Click to collapse
? What? Unless I missed something I never recall op stating anything about flashing 2.3.5. Anyway, any progress on getting phone into RSD?
Sent from my MB855 using XDA
Try this step.
1. Connect your photon and PC/Laptop.
2. Press RSD protocol (volume up + power)
See if this work.
Was i has same problem, failed when flashing using rsdlite (when entering bp passthough), when try to enter rsd protocol, its just stuck on moto logo. But when i try to connect it with pc/laptop and try again entering rsd protocol, its work.
Hello everyone!! Have problem with my E970...everything was ok before I try to flash new rom ATT-Stock-E97020j, on 50% installation phone has turned off...after he only show LG logo and black screen and restart all the time!! i Try to repair him with Tennybin and flash with LGNPST (evrerything go well, slick) but my phone again only show lg logo and restart all the time. I can only put him into download mod when he is connect on usb, can't go into recovery mode, when I disconnect him from usb no sign of life...
Rooted, unlocked, I have TWRP backup but can't go into recovery :crying:
Sorry for my bad english!!
Thanks
EDIT: something is happened when I try with teenybin(alt) file, red light is blinking, vibrate on power key press, when I push power+vol up I see recovey mod on few seconds but he make restart again and red light is blinking all time ...all this is happened when is phone connect on usb, after disconnect he is dead... Is maybe some problem with battery
Dony28 said:
Hello everyone!! Have problem with my E970...everything was ok before I try to flash new rom ATT-Stock-E97020j, on 50% installation phone has turned off...after he only show LG logo and black screen and restart all the time!! i Try to repair him with Tennybin and flash with LGNPST (evrerything go well, slick) but my phone again only show lg logo and restart all the time. I can only put him into download mod when he is connect on usb, can't go into recovery mode, when I disconnect him from usb no sign of life...
Rooted, unlocked, I have TWRP backup but can't go into recovery :crying:
Sorry for my bad english!!
Thanks
Click to expand...
Click to collapse
Use the "alt teenybin" in LGNPST. You should then be able to get into recovery by pressing vol up + power.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Use the "alt teenybin" in LGNPST. You should then be able to get into recovery by pressing vol up + power.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Dony28 said:
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Click to expand...
Click to collapse
Sounds like a dead battery. Plug it into the wall charger for at least a couple of hours and then see if you can get into recovery. Worse case, may need to do a battery pull. It can be done and is fairly easy...you just need the proper tool.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Sounds like a dead battery. Plug it into the wall charger for at least a couple of hours and then see if you can get into recovery. Worse case, may need to do a battery pull. It can be done and is fairly easy...you just need the proper tool.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
I will try this, don't see any other solution!!
http://forum.xda-developers.com/showthread.php?t=2039707
Dony28 said:
Yes I was try with "alt teenybin"...you can see my edit post up!
- teenybin - no change
-"alt teenybin"- vibrate on power, red light blinking, recovery mode on vol up +pwr but restart again
- ATT E970 20j Stock .bin: LGE970ATT-V20j-Stock.bin.zip with LGNPST - NO CHANGE
Thanks
Click to expand...
Click to collapse
Yes if you can sit in recovery mode, your battery *should* charge there.
[r.]GimP said:
Yes if you can sit in recovery mode, your battery *should* charge there.
Click to expand...
Click to collapse
I can't, he restart immediately. Only download mode when I connect him on usb
Heh i FIX my phone!!! Thanks to xj220gt for useful post " Unbrick phone part: Rapidly Flashing Red Light."
I was disconnect battery on 15 min and after that I was able to enter in recovery
When I click power + volume keys (-, +, and both) nothing happens, 10 seconds later motorola logo appears for 2 seconds and then shuts down again.
Can you give more info?
1. Is your battery charged
2. Did you tried to flash stock roms with RSD, if you did, tell which xml you tried to install.
turffe said:
Can you give more info?
1. Is your battery charged
2. Did you tried to flash stock roms with RSD, if you did, tell which xml you tried to install.
Click to expand...
Click to collapse
1. Was charged 80-90% when it bricked. I cant see how many battery is remaining but if i see the moto logo, something have to have.
2. I need the bootloader before trying that. The RSD doesn't detect my phone.
Hi all,
I have Motorola XT621 Primus, after some playings with it and trying to root and add RTL patching i got a brick.
Now the status is that i have fastboot mode working but bootloader is locked, no recovery working and no ADB working, no boot too.
I tryed many ways to flash or unlock bootloader but nothing works. Any commands like fstboot oem got output like (...)
Is there any way to unlock bootloader via fastboot and flash new rom or it completely bricked?
Thanks!
abutreca said:
1. Was charged 80-90% when it bricked. I cant see how many battery is remaining but if i see the moto logo, something have to have.
2. I need the bootloader before trying that. The RSD doesn't detect my phone.
Click to expand...
Click to collapse
Ok first hold the two volume buttons then push and release the power button. Then click on bp tools and see if the logo comes and than goes to the battery thing. Or try to just go into the same place and say normal boot. If all else fails do a fast boot. and use the droid razr root utility to restore back to stock. Let me know if any of this helps or you have questions.
abutreca said:
When I click power + volume keys (-, +, and both) nothing happens, 10 seconds later motorola logo appears for 2 seconds and then shuts down again.
Click to expand...
Click to collapse
Try this exactly to get into fastboot mode...
Power off phone
Press and hold volume down and power button
When the screen flickers release only the power button.
If you can get into fastboot you can use Matt's DROID utility to flash OEM Jellybean Rom onto it in an attempt to resurrect.
LordGarth said:
Try this exactly to get into fastboot mode...
Power off phone
Press and hold volume down and power button
When the screen flickers release only the power button.
If you can get into fastboot you can use Matt's DROID utility to flash OEM Jellybean Rom onto it in an attempt to resurrect.
Click to expand...
Click to collapse
No need, i had the warranty and they fixed it, also changed battery and the cover for the MS/SIM. I was lucky.
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
ejaybass said:
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
Click to expand...
Click to collapse
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Draxin said:
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Click to expand...
Click to collapse
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
ejaybass said:
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
Click to expand...
Click to collapse
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
welder73 said:
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
Click to expand...
Click to collapse
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
ejaybass said:
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
Click to expand...
Click to collapse
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
welder73 said:
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
Click to expand...
Click to collapse
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
ejaybass said:
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
Click to expand...
Click to collapse
How long are you holding them down.. it can take a good twenty-thirty seconds sometimes. Mine is also finicky if I don't press them all down at the exact same time, it wont let me in then either.
If your getting the boot logo it is just really hard to believe you dont have stock recovery... can the device charge? If you hook it to a computer do you get the white led?
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
https://www.youtube.com/watch?v=LA8og7sbtBY
To unbrick your phone...Don't worry... its not broke
hrishi21007 said:
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
To unbrick your phone...Don't worry... its not broke
Click to expand...
Click to collapse
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
ejaybass said:
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
Click to expand...
Click to collapse
Now I am facing an issue that's really annoying. I can get into recovery (AP Fastboot) if the phone is connected to a power source. As soon as I unplug it, the screen turns black! When I connect the phone to my computer, the LED goes white and I cannot access AP Fastboot....
When no cable is connected to the phone I cannot access any recovery mode.
What is wrong here? Even if I connect the phone to the power source only, it shows the red Motorola logo all the time. It seems as if I cannot turn it off. Is there also a trick how to really turn it off and let the phone charge??