Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
New Link
http://www.droidrzr.com/index.php/topic/2248-droid-razr-utility-16-contains-612181-fastboot-files/
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Great Job! Only wish that I knew about this 3 weeks ago! I took the back off and ended up glueing it back on and did a warranty exchange. I hope they don't say anything!!!
Again Great Job!!!!
Sent from my DROID RAZR using xda premium
pedrotorresfilho said:
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
As long as once it is plugged in and the screen comes up in the AP Fastboot it will work. Just hold power plues volume up and down then once that turns off immediatley press the volume up and down and it will boot you right to the boot menu. But just wondering what shows up for you if it is not the fastboot?
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
exactly. for those that got cut off as the phone was in the process of flashing, i dont think it will boot to any phone charging icon because there's no software on the device. I've been trying for a week now
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
dude your a life saver! thank you!!!
solution
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
mestisso79 said:
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
Click to expand...
Click to collapse
did you try the above tutorial? worked fine for me a couple hours ago
jaredakelly said:
did you try the above tutorial? worked fine for me a couple hours ago
Click to expand...
Click to collapse
Definitely didn't work. When that m logo comes up, it disappears and the screen goes off. The charging icon does not show.
Sorry for the late reply but it is good to hear this method to work for jaredakelly . For those who are having problems did you have the phone charging in the wall outlet and not on a computer usb? The best steps is to choose the the tools option then just let the phone boot to the m logo then just leave it there on the wall outlet. Make sure you are using the Motorola usb cable that came with your phone and its usb adaptor that might make a difference.
I just tried this tut and it works as far as I can tell I am at the screen for battery charging but there is a big "?" in the center, the phone doesnt know what level its at lol..
I suggest you space out and make your original steps in bigger and bolder text for the specific buttons because I almost missed the power + vol down + vol up and was just pressing the volume buttons
This thread should be stickied!
Yeah sorry if my instructions were not to clear this is my first time posting anything like this on this site, but I am glad to hear it is working for you too. I don't even have this phone lol , it was my friend's and he had it stuck on the fastboot so I messed around with it and in the end this was the result.
yep
i think my battery is too low to attempt this i got it on 3 times and tried to fastboot restore but battery kept dying before completion so i guess im just screwed
no you should be fine because as long as the power cable is still plugged in it should work regardless of the low battery level. I did this on my friend's phone with 0% battery.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
I have the same problem :/
This method worked for me! Your are the MAN OP!
Sent from my DROID RAZR using XDA
I think this should be stickied
Sent from my DROID RAZR using XDA
Well this got on xda front page
Sent from my DROID RAZR using XDA
Not a very good success rate for being on the front page. I'm going to try it later, though I think that I tried something like this before and it didn't work. I know that I have read this somewhere else.
Related
I was putting the new update on and Odin was doing its thing. it went black now I got the stupid screen of a phone pic a yellow triangle and a computer. I know my phone is hardware locked what can I do? I rooted it with the one click root but no rom was installed.
Do you have adb running? You do know there was a fix for hardware locked vibrants, right?
If you have adb running & your phone can be seen by your pc it might be possible to get the sbl file pushed in to flash. Not sure it would work this way but it might be worth a shot. Not to sure what commands you would need either.
All~G1 said:
Do you have adb running? You do know there was a fix for hardware locked vibrants, right?
If you have adb running & your phone can be seen by your pc it might be possible to get the sbl file pushed in to flash. Not sure it would work this way but it might be worth a shot. Not to sure what commands you would need either.
Click to expand...
Click to collapse
no computer does not see the phone. I used terminal to get into download mode.
What is the fix for the hardware lock?
nomadrider123 said:
no computer does not see the phone. I used terminal to get into download mode.
What is the fix for the hardware lock?
Click to expand...
Click to collapse
Do you not know how to search? God...
http://forum.xda-developers.com/showthread.php?t=804305
Master™ said:
Do you not know how to search? God...
http://forum.xda-developers.com/showthread.php?t=804305
Click to expand...
Click to collapse
I did search and search on hardware locked and bricked phones. My first post was about all I see is the phone, yellow triangle and the computer icons. I pulled the battery hold the volume up and down both put the battery in plugged in the usb cord and It goes right to the symbols of the phone, yellow triangle and the computer. Odin does not see my phone sorry but I have studied for hours how to root and do several things to my vibrant by myself. This has me stumped and looking for help.
nomadrider123 said:
I was putting the new update on and Odin was doing its thing. it went black now I got the stupid screen of a phone pic a yellow triangle and a computer. I know my phone is hardware locked what can I do? I rooted it with the one click root but no rom was installed.
Click to expand...
Click to collapse
I know my phone is hardware locked what can I do?
Nothing. The 3-button fix should have been applied prior to flashing anything! You need a new phone, unless somehow, magically, after searching these forums and trying the (at least) 20+ ways people claim to get into download mode work.
None have worked on mine.
im not asking if ODIN can see your phone. I was asking if ADB sees your phone...
Do you have ADB setup? if so, what happens when you type:
adb remount
If you do have adb setup and nothing happens then you are in the same boat as southplatte.
get the samsung captivate back to download mode
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
get the samsung captivate back to download mode
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
Thank you Tudo525..... That worked. Appreciate it. I have been stuck here for hours.
hello tudo
just can not do what you describe
when I have the phone-yellow exclam-computer picture, i press volume up and power, wait for 3-4 seconds, screen turns black and I release the power button and plug the usb?
JayJayaa said:
hello tudo
just can not do what you describe
when I have the phone-yellow exclam-computer picture, i press volume up and power, wait for 3-4 seconds, screen turns black and I release the power button and plug the usb?
Click to expand...
Click to collapse
No no! Hold vol up/down, not power...
Sent from my SGH-T959 using XDA App
Pull the battery, sim, memory card. Plug the usb. Hold volume up and down and while holding those two buttons put the battery back and it should get you in downloading.
Sent from my SGH-T959 using Tapatalk
Alex9090 said:
Pull the battery, sim, memory card. Plug the usb. Hold volume up and down and while holding those two buttons put the battery back and it should get you in downloading.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Omg Thank You! you just saved me 2hrs. Try this method if you guys get the triangle sign. It works!
Same issue...
Galaxy S 4g Tmobile - tried pulling all cards and battery and 3-button trick but to no avail. Never enters downloading mode. How can I tell if I'm fully bricked?
Dharra, youre in the wrong forum altogether
OP, try a jig. If that doesnt get you into download.mode, listen very carefully: youre ****ed.
Your only remaining options will be to send it to someone with a riff box (pm connexions2005 or go to mobiletechvideos.com) or do the unbrickable mod and run the unbricking app.
If you do fix your phone, do the hw lock fix right ****ing away!!
Sent from a cell tower to the XDA server to you.
tudo525 said:
I have similar problem like that. When i use Odin3 one click flash the ROM. It stuck in the middle of flash. I take off the usb cable out ,try to reboot the phone. Oop .. the screen show the sign of the phone--- yellow triangle with exclamation sign in the middle---computer icon. Can do nothing with it, because the computer now can not connect with the phone.
In my case, I take the USB off the phone but still connect with the computer. Hold the volume button + power until the phone flash in black screen .This moment happen very quick ,it will go back to the unconnected sign again. When the screen turn black just release power button but still press volume button (otherwise it not working) hook the USB back in your phone right on that moment. The Phone go back to download mode. If not work try couple time ,important is timing right on the moment the flash to black screen .
Now ,you can use the odin3 flash the ROM again. It works for me ,and i try again same situation couple times. it really works.
hopefully, this will help for who got the same problem.
Click to expand...
Click to collapse
Oh thank you thank you thank you Tudo525!!! You've saved my phone!! I was trying to upgrade my brand new Galaxy S2 HD LTE through Kies and it froze just like your problem. I did what you suggested and it worked perfectly!! Now I have my phone back!! Thank you!!!!!!!!!!!!!!!!!
The Same Happened I Did what u said with ODIN 3 ... but my phone Continuously restarts with in a minute interval ... Please Hep !!!
The PDA I used is CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1.tar.
Samsung Galaxy S ... 2.3.3 DDJV6
...
Seenu AndhraPradesh !
...
Thanks In Advance !
---------- Post added 11th February 2012 at 12:33 AM ---------- Previous post was 10th February 2012 at 11:56 PM ----------
The Restarts Too Stopped The Same I Did With CF-Root-XX_OXA_JVO-v3.2-CWM3RFS
Thanks Everyone ..!
Everyone Smiles When The Problem Comes To An End !!!
...
i9000 2.3.3 DDJV6
Seenu , AndhraPradesh
...
hello,
need help,
i also have display on my screen (cellphone)...(!)...(PC).
i tried the battery pull and plug in the usb and holding the vol- vol + buttons. still get the same thing. i also tried the holding the all 3 buttons (power) untill the screen went blank then release and plugged in the usb. no change.
i do get a chime on my windows xp that usb is connected but nothing shows up
also odin does shoes connected (comm XXX) but every time i try to re flash it just sits there on the "initialization"
what can i do?
What bootloader do you have? If GB press vol down and power together then plug in USB.
i commited the mistake of partitioning the sd card using rom manager.....so then i tried this http://forum.xda-developers.com/showthread.php?t=745547
flashed the EU version , then i strggled going into dowload mode again....i finally got into download mode using adb ...and when i was flashing it , it suddendly stopped and then the phone to pc symbol appeared
i dont know what else to do...i've been up all night and the phone is not even mine :'( please help
also my phone seems to be locked ....
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
stephenj37826 said:
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i"ve tried that but no luck =/
Can you get adb to work?
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Mothafizzy said:
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Click to expand...
Click to collapse
exactly....we are having the same problem....we cant do anything but watch that damn sign
did you fix it?
sadly mine was that way and I had to get it replaced
nomadrider123 said:
sadly mine was that way and I had to get it replaced
Click to expand...
Click to collapse
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
El Cipitio said:
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
Click to expand...
Click to collapse
If you have tried everything twice and nothing worked .Don't mess around with customer services. You need to talk to tech services they got me a replacement
Download Mode trick.. it worked for me.
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
tee34life said:
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
Click to expand...
Click to collapse
No luck, currently going through a relentless trial-error process of different usb-battery-sim/sd-volume-power buttons. Just found out insurance which I thought was covered on my phone via Asurion through T-Mobile is only covering one of the phones on my line, yet I bought them both with warranties at the same time... Pretty bummed, Only is looking like paying the deductable fee for a new phone as if lost/stolen.. Hope something pulls through.
Just a small deviation
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work
I have order a factory cable, but still i am not able to boot my razr xt910
i am getting this message:
AP fastboot Flash Mode (S) (Flash Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Status code: 0
Battery OK
OK to Program
Transfer mode:
USB Connected
Please help me, i am trying to resolve this problem since two weeks
This happened to me 2 days ago while testing without my daily caffeine.
http://forum.xda-developers.com/showpost.php?p=25354339&postcount=210
IDK if you have access to, or are comfortable with doing what I did. That's your only option until you get that cable.
I have the factory cable
i have the factory cable but still i am not able to install any rom on it
yaloraibi said:
i have the factory cable but still i am not able to install any rom on it
Click to expand...
Click to collapse
What's wrong?
Sent from my XT910 using Tapatalk 2
where did you get the "factory" cable?
yaloraibi said:
I have order a factory cable, but still i am not able to boot my razr xt910
i am getting this message:
AP fastboot Flash Mode (S) (Flash Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED, Status code: 0
Battery OK
OK to Program
Transfer mode:
USB Connected
Please help me, i am trying to resolve this problem since two weeks
Click to expand...
Click to collapse
It's difficult to help when there is a lack of information for anyone to help you.
If you can't update with RSD lite, try RSD alternative:
http://forum.xda-developers.com/showthread.php?t=1453660
If you have the factory cable, always use that when flashing.
pedrotorresfilho said:
What's wrong?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
I am usin RSD to upload the rom but still i am getting error, this is the rome (SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_MEA_RETAIL.xml)
Rouxe41 said:
where did you get the "factory" cable?
Click to expand...
Click to collapse
I got thr cable from ebay
I used the same ROM for my RAZR bought in Kuwait a week ago and everything was just fine. But I had 100% charged battery. Where are you from?
borisgraovac said:
I used the same ROM for my RAZR bought in Kuwait a week ago and everything was just fine. But I had 100% charged battery. Where are you from?
Click to expand...
Click to collapse
I am from Bahrain, if you can help me out to resolve my problem
why dont you go back to stock first?
Sent from my ICS Droid RAZR using xda premium
Rouxe41 said:
why dont you go back to stock first?
Sent from my ICS Droid RAZR using xda premium
Click to expand...
Click to collapse
How i can go back to STOCK?
yaloraibi said:
I am from Bahrain, if you can help me out to resolve my problem
Click to expand...
Click to collapse
This is how I did it. You need RSD Lite 5.6 and ROM you already have and, of course, pretty much battery charged (50% at list, otherwise could be a mess). Also, you need ADB installed on your computer in order to get the phone recognised.
Power down your device. Press and hold the Vol+ and Vol- keys, then press and hold the power button until a white screen appears and you can now release all three buttons.
Use the Vol- key (and ONLY the Vol- key) to scroll through the list. Scroll until “AP Fastboot” is highlighted and press the Vol+ key to select it.
Connect the USB cable to both your PC and phone. NOTE: At this time, you may see drivers trying to install but they may not all be successful (that’s okay). But your computer does need to recognize your Razr as a ADB interface device (if it does not, you probably do not have ADB configured properly and you will not be able to flash your phone.
Open RSD Lite and use the program (button to the right of the “Filename:” box) to open the .zip file containing your fastboot files.
When prompted, select the “Uncompress Only” button on your PC.
After it has uncompressed the files, ensure that RSD Lite shows “connected” on one of the ports and make sure that your phone shows “USB Connected”. If you are still not connected you may need to unplug the device and plug it back in (I had to do this one of the times I did this procedure).
Press the “Start” button at the top of the RSD Lite application and let it do it’s thing. Don’t touch the phone, don’t unplug the phone…just walk away or sit quietly and watch. This process should take approximately 15-20 minutes in total so BE PATIENT and just wait!
Once the steps have completed, your phone will reboot…JUST KEEP WAITING. You will see the stock recovery screen and it will need a few minutes to flash the factory ROM.
When you see the phone’s lock screen you disconnect the USB cable and close RSD Lite.
borisgraovac said:
This is how I did it. You need RSD Lite 5.6 and ROM you already have and, of course, pretty much battery charged (50% at list, otherwise could be a mess). Also, you need ADB installed on your computer in order to get the phone recognised.
Power down your device. Press and hold the Vol+ and Vol- keys, then press and hold the power button until a white screen appears and you can now release all three buttons.
Use the Vol- key (and ONLY the Vol- key) to scroll through the list. Scroll until “AP Fastboot” is highlighted and press the Vol+ key to select it.
Connect the USB cable to both your PC and phone. NOTE: At this time, you may see drivers trying to install but they may not all be successful (that’s okay). But your computer does need to recognize your Razr as a ADB interface device (if it does not, you probably do not have ADB configured properly and you will not be able to flash your phone.
Open RSD Lite and use the program (button to the right of the “Filename:” box) to open the .zip file containing your fastboot files.
When prompted, select the “Uncompress Only” button on your PC.
After it has uncompressed the files, ensure that RSD Lite shows “connected” on one of the ports and make sure that your phone shows “USB Connected”. If you are still not connected you may need to unplug the device and plug it back in (I had to do this one of the times I did this procedure).
Press the “Start” button at the top of the RSD Lite application and let it do it’s thing. Don’t touch the phone, don’t unplug the phone…just walk away or sit quietly and watch. This process should take approximately 15-20 minutes in total so BE PATIENT and just wait!
Once the steps have completed, your phone will reboot…JUST KEEP WAITING. You will see the stock recovery screen and it will need a few minutes to flash the factory ROM.
When you see the phone’s lock screen you disconnect the USB cable and close RSD Lite.
Click to expand...
Click to collapse
The issue is i already try to install the rom with less battery "less than 50 %", then my phone stooped charging and did not work, that why i have ordered the factory cable
yaloraibi said:
The issue is i already try to install the rom with less battery "less than 50 %", then my phone stooped charging and did not work, that why i have ordered the factory cable
Click to expand...
Click to collapse
Here in this forum is thread "Low Battery charge in Ap Fastboot Fix". Might be helpful. Also, I remember the another thread here explaining how to make "factory cable" by yourself. Maybe the cable you've got is mulfunction.
RSD Lite 5.7 failed
borisgraovac said:
This is how I did it. You need RSD Lite 5.6 and ROM you already have and, of course, pretty much battery charged (50% at list, otherwise could be a mess). Also, you need ADB installed on your computer in order to get the phone recognised.
Power down your device. Press and hold the Vol+ and Vol- keys, then press and hold the power button until a white screen appears and you can now release all three buttons.
Use the Vol- key (and ONLY the Vol- key) to scroll through the list. Scroll until “AP Fastboot” is highlighted and press the Vol+ key to select it.
Connect the USB cable to both your PC and phone. NOTE: At this time, you may see drivers trying to install but they may not all be successful (that’s okay). But your computer does need to recognize your Razr as a ADB interface device (if it does not, you probably do not have ADB configured properly and you will not be able to flash your phone.
Open RSD Lite and use the program (button to the right of the “Filename:” box) to open the .zip file containing your fastboot files.
When prompted, select the “Uncompress Only” button on your PC.
After it has uncompressed the files, ensure that RSD Lite shows “connected” on one of the ports and make sure that your phone shows “USB Connected”. If you are still not connected you may need to unplug the device and plug it back in (I had to do this one of the times I did this procedure).
Press the “Start” button at the top of the RSD Lite application and let it do it’s thing. Don’t touch the phone, don’t unplug the phone…just walk away or sit quietly and watch. This process should take approximately 15-20 minutes in total so BE PATIENT and just wait!
Once the steps have completed, your phone will reboot…JUST KEEP WAITING. You will see the stock recovery screen and it will need a few minutes to flash the factory ROM.
When you see the phone’s lock screen you disconnect the USB cable and close RSD Lite.
Click to expand...
Click to collapse
I have tried RSD Lite and Flash me to flash many different stock oms without any success i am getting same error as the message of this thread like bot failure please someone me... i have no factory cable don't know exactly what is that and i am sure its not readily available where i live.
Hey guys,
Just a small advice for those who didn't know.
If you want to flash another rom and you got a "battery low" in bootloader/ fastboot AP, don't be panic: make sure you've booted your device in fastboot mode. Then just press the power button shortly and the device will shut down completely. Now you can charge your device without any factory cable. You will also get the loading Stats displayed.
This works on bootloader version 0A.72 onwards
dtrail1 said:
Hey guys,
Just a small advice for those who didn't know.
If you want to flash another rom and you got a "battery low" in bootloader/ fastboot AP, don't be panic: make sure you've booted your device in fastboot mode. Then just press the power button shortly and the device will shut down completely. Now you can charge your device without any factory cable. You will also get the loading Stats displayed.
Click to expand...
Click to collapse
doesnt work for me unfortunately tried this before, never shows any stats. guess it would work for people who havent screwed up like me.
New Method?
spc_hicks09 From DroirRzr.com posted this. I'm trying it now, Will let you know how it goes.
Press and hold power and volume down until the screen flickers, release those buttons and quickly press all three side buttons (power, vol up and vol down). When the bootloader menu pops up, plug in the charger. Use the volume down button to scroll to the SBF option and use volume up to select it. Now press and hold the power button for about 3 seconds then release. This will automatically put your phone in the "powered down/charging" mode. Wait till the battery charges all the way then complete a fastboot. I just did this 3 days ago so I know it works.
Click to expand...
Click to collapse
aety9 said:
spc_hicks09 From DroirRzr.com posted this. I'm trying it now, Will let you know how it goes.
Click to expand...
Click to collapse
This didn't work btw. Tried it and ended up having to force-charge the battery by opening the case and connecting the terminals with a stripped USB cable.
I tried downloading the new 4.0.4 leak and it didn't work :/
But anyway i set my phone back to original stock and my battery must have died.
So now my phone is doing something weird. I go to turn it on and it wont go past the M logo.
When I plug it into the charger it still wont go past the M logo, nor does it charge my battery. I can't plug it into the computer because the phone is so dead that it gives me "the white light"
I can't send my phone in because I rooted it and they won't do anything..
Please help!
Try following Steps:
Boot in AP Fastboot > Connect your Wall Charger > Press Power
If you're an lucky Guy, your RazR will pass the red M and jump into the Battery Screen.
If your system is broken, you have to order an Factory Cable. With this you can flash the correct system signed or use the modded Utility for CDMA Leaks, to get your Phone back to life.
Wish you luck dude.
HSD-Pilot said:
Try following Steps:
Boot in AP Fastboot > Connect your Wall Charger > Press Power
If you're an lucky Guy, your RazR will pass the red M and jump into the Battery Screen.
If your system is broken, you have to order an Factory Cable. With this you can flash the correct system signed or use the modded Utility for CDMA Leaks, to get your Phone back to life.
Wish you luck dude.
Click to expand...
Click to collapse
I can't boot into AP Fastboot and THEN plug in my phone, becuase my phone is completely dead :/
Fallen_One said:
I can't boot into AP Fastboot and THEN plug in my phone, becuase my phone is completely dead :/
Click to expand...
Click to collapse
i had the exact same situation as you. however mine went down to last resort as nothing would save me. i had to get a motorola factory cable and all back to normal now.
you can still try alternatives incase yours is slightly different situation
i think they meant well plug into wall charger
ur phone boots up automatically so have vol + & - held then pick AP Fastboot then press power button to turn off phone and then see outcome?