Hey, i rooted my galaxy s3 using CF-root and it worked fine.
Then the update (don't know what version) came out and i couldn't update, i decided to just get stock rom back on it and remove the root.
So i used the easiest way and just updated my firmware in Kies. This of course lead to emergency firmware recovery and this would let me restore it to stock ROM. The problem now is that it's stuck at 0% doing the emergency firmware recovery. I understand that a fix might be to run Kies as an administrator but that would require me to first exit Kies and try again. The problem is that it is stuck at 0% and it won't give me an error. How do i get out of emergency recovery mode to run it as an administrator?
One other thing that might be related, my phone has been freezing randomly a lot lately. I know how this is caused and this is why i also decided to just restore stock rom. I'm wondering if it has something to do with it being stuck at 0%.
It's also possible the screen it's displaying now (the phone) has just frozen and that may be what's causing the 0% stuff.
I'm just going to leave it at the 0% screen until i get a response telling me how to get out of this screen.
It's been on 0% for well over 30 minutes.
The phone model is the international version (GT-19300)
as far as i know there is a software update for my phone, at least i got prompted for an update and in Kies i also get a prompt for an update.
I don't really care what the update's version is, but i know there is an udate and the version is probably irrelevant.
Update for 4.2.2 please clarify as its not released as far as we know .
Please what phone model as well .
jje
JJEgan said:
Update for 4.2.2 please clarify as its not released as far as we know .
Please what phone model as well .
jje
Click to expand...
Click to collapse
The model is the GT-19300 (international version) and for the software update, i don't know what version it is but i assumed it was 4.2.2
I guess i was wrong about the exact version but anyway there was a software update.
Flash stock rom via Odin
Kies sorry not a product i know or use .
jje
JJEgan said:
Flash stock rom via Odin
Kies sorry not a product i know or use .
jje
Click to expand...
Click to collapse
Okay, i just got an error message from kies which is good since that means it's stopped trying.
Can i just flash it from emergency recovery mode? Every tutorial out there tells me to get into download mode which i can't get into.
I'm going to try it the Kies-way one more time while running it as an administrator and see if that works in the meantime.
Yes!, i just tried it using the "use the recovery code" or something button and it's actually counting now.
Thanks for the help anyway.
dapwnager said:
Okay, i just got an error message from kies which is good since that means it's stopped trying.
Can i just flash it from emergency recovery mode? Every tutorial out there tells me to get into download mode which i can't get into.
I'm going to try it the Kies-way one more time while running it as an administrator and see if that works in the meantime.
Click to expand...
Click to collapse
Let us know if the Kies-way is Working..
I don't really know what happened now but it seems to be stuck again at 0%, maybe i mistook the unpacking binaries-screen for the installing screen. Anyway it's still at 0%...
I'll try a few more times and see if anyone else knows what to do.
Otherwise i guess i'll take it to a store or contact samsung or something even though it had root on it.
Root voids warranty .
JJEgan said:
Root voids warranty .
Click to expand...
Click to collapse
Yeah i know but i'll have few other options... also it's been at 0% for around 2 hours now...
guess i'll just disconnect the cable soon and try with a different USB port and diferfent cable or something.
Well there's one positive thing, it still gets into emergency recovery mode.
Hooray! it's now actually installing it and i didn't mistake it for downloading this time. I switched USB ports and now it works apparently.
Also something people that do this in the future should know: if you unplug the cable, it just gives you the error message saying that it couldn't find it which shouldn't cause any trouble. BUT only do this once it is stuck at 0%.
Related
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
addI was trying to install new radio and it would not finish process. Modem was green but stopped, no action for about ten minutes. I then unplugged it from the computer. pulled battery and tryed to start. " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I also tried to start in recovery and the same screen popped up. HELP I don't like using Odin, coming from an HTC where I just used CWM. What do I do???? Also, I am rooted via 66 method and Verizon
buff31 said:
addI was trying to install new radio and it would not finish process. Modem was green but stopped, no action for about ten minutes. I then unplugged it from the computer. pulled battery and tryed to start. " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I also tried to start in recovery and the same screen popped up. HELP I don't like using Odin, coming from an HTC where I just used CWM. What do I do???? Also, I am rooted via 66 method and Verizon
Click to expand...
Click to collapse
66 method not seen that you would not be yet another one lost and in the wrong forum and maybe flashing wrong products for your phone ????
Read sticky if you are .
http://forum.xda-developers.com/showthread.php?t=1756338
jje
Help,, Firmware Upgrade Issue
I was trying to install new radio and it would not finish process. Modem was green but stopped, no action for about ten minutes. I then unplugged it from the computer. pulled battery and tryed to start. " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I also tried to start in recovery and the same screen popped up. HELP I don't like using Odin, coming from an HTC where I just used CWM. What do I do???? Also, I am rooted via 66 method and Verizon 1535.. Should I try to root again and how would I get the phone in download mode?[
buff31 said:
I was trying to install new radio and it would not finish process. Modem was green but stopped, no action for about ten minutes. I then unplugged it from the computer. pulled battery and tryed to start. " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I also tried to start in recovery and the same screen popped up. HELP I don't like using Odin, coming from an HTC where I just used CWM. What do I do???? Also, I am rooted via 66 method and Verizon 1535.. Should I try to root again and how would I get the phone in download mode?[
Click to expand...
Click to collapse
Do you have an International GS3 or a US model? If you have a US model go to the US thread.
What were you trying to install, a modem or a kernel?
What did you do exactly?
Also, I am rooted via 66 method and Verizon 1535.
I am seeing this as OP has trouble with reading >>>one my reply as to may be in wrong forum
jje
Firmware issue
JJEgan said:
66 method not seen that you would not be yet another one lost and in the wrong forum and maybe flashing wrong products for your phone ????
Read sticky if you are .
http://forum.xda-developers.com/showthread.php?t=1756338
jje
Click to expand...
Click to collapse
I was rooted properly with no issues. The issue came about when I tried to upgrade the radio and pulled the wire during process.
buff31 said:
I was rooted properly with no issues. The issue came about when I tried to upgrade the radio and pulled the wire during process.
Click to expand...
Click to collapse
Do you have a US model or the International one? If you have a US model you`re in the WRONG thread.
InstallNew VRLG1 modem
I have the Verizon SIII and am rooted. I was attempting to install the VRLG1 modem/radio. I was inthe process of flashing all was going well , the box above modem was green but then it just hung ther for 10 minutes or so, I then unplugged the phone, HUGE MISTAKE, pulled the battery and tried to start and the screen " firmware encounter issue.... use Kies for recovery" I also tried to start into recovery with phone off (three buttons) and same screen appeared. Should i go to Kies if am rooted and what would I do? Bricked???
buff31 said:
I have the Verizon SIII and am rooted. I was attempting to install the VRLG1 modem/radio. I was inthe process of flashing all was going well , the box above modem was green but then it just hung ther for 10 minutes or so, I then unplugged the phone, HUGE MISTAKE, pulled the battery and tried to start and the screen " firmware encounter issue.... use Kies for recovery" I also tried to start into recovery with phone off (three buttons) and same screen appeared. Should i go to Kies if am rooted and what would I do? Bricked???
Click to expand...
Click to collapse
I would like to help you you but look in the US forum, maybe you can find a solution there like reflash the whole stock rom an than reroot.
This however is the International forum, we have different hardware and software.
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
bigallo said:
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
Click to expand...
Click to collapse
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
xSpeced said:
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
Click to expand...
Click to collapse
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
bigallo said:
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
Click to expand...
Click to collapse
What happens when you try to boot into CWM?
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Mika83AC said:
What happens when you try to boot into CWM?
Click to expand...
Click to collapse
Notthing, if i hold VolumeUp+Home+Power the phone doesn't turn on, neither on logo screen
holdz said:
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Click to expand...
Click to collapse
I can't use Odin cause when i plugin the phone (in download mode) Odin and the whole PC can't see it. I have win8, i don't know if that's a problem for Odin or something.
Is there a way to check if i have driver/odin/any working without using the phone?
Is there a way to check if i have driver/odin/any working without using the phone?
By plugging another SGS3 in is all .
jje
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
kelvin.m said:
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
Click to expand...
Click to collapse
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Donnie Sins said:
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Click to expand...
Click to collapse
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
kelvin.m said:
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
Click to expand...
Click to collapse
Sorry, I'm not an expert at this point. Search for threads about hard bricks, and possible solutions (or anyone else has to have a better answer). Good luck anyway.
Sent from the Matrix
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
gastonw said:
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
Click to expand...
Click to collapse
my phone will not enter recovery mode or download mode. it will not turn on at all.
If you've completely bricked your phone. ..
Take your Battery out of the phone and charge with external charger. ..
After that use a USB Jig(should get on ebay, isn't much expensive) to boot your phone into download mode and Flash the stock Rom using Odin...
If this doesn't work then going to the official Samsung store should be your move..
Press thanx if I helped...
Sent from my GT-I9100 using xda app-developers app
Hi.
Please read all of what I tried before suggesting something.
I have a S3 GT-I9300 international version. It's from Orange Israel and its warranty recently ended.
All of what I tried below has been done with the phone in the Download mode by turning it while holding the power, volume down and the home key, there is absolutely nothing else this phone can do, if I just normally power it on it'll get stuck on the Samsung Galaxy S3 screen, I can't even get to the animated Samsung logo. Kies is uninstalled completely and I have no AV.
Now here is what I tried so far:
1. Most forums said that I could try a regular flash via Odin by inserting the firmware.md5 file into the PDA section and flashing it, but that just makes Odin get stuck on the process (Setup Connection...) or give me this error [1st screenshot from the left]
2. I also tried attaching the .pit file for my 16GB S3 named (GT-I9300_mx_20120220.pit) alone but that makes Odin get stuck on this process as well [2nd screenshot from the left]
3. I tried attaching both .md5 and .pit files at the same time but it just also gets stuck on the (Setup Connection...) forever. And when I say stuck I don't mean Odin stops responding, I mean it just hangs on that process.
4. I looked in forums even more and they suggested I try different USB ports or cables and I did, still nothing.
5. I tried different Odin versions for all of the things I already tried.
6. I tried flashing different firmware versions for all of the things I already tried.
7.1. I downloaded Heimdall Suite and I tried to use it since a guy mentioned it helped him immensely by him just installing the drivers using the "zadig.exe" file and choosing his S3 from the All Devices list and installing the driver, however I encounter something different because the program has Replace Driver option that gives me this error [3rd screenshot from the left]
7.2. I later discovered that I can install the driver anyway by clicking the arrow next to the button and choosing Install WCID driver, that worked successfully, however it hasn't solved my problem like the guy on the forum, for him, the S3 started to get recognized by Odin and it flashed his device successfully, for me, it still gave me that error.
8. After I installed the driver from Zadig I launched Heimdall Suite in hopes of finally flashing my device but it gave me this error when trying to load up the .md5.gz [4th screenshot from the left]
9. I then proceeded to add the .pit file I downloaded earlier into the Flash tab in Heimdall tool and adding the boot.img because I think that should be enough to get it going, plus I don't know what else to put. It gave me this error [5th screenshot from the left]
I'll keep updating this post when I try new stuff, however I would like you guys to suggest things I haven't tried before or supply me with files I haven't found already (.pit files, firmwares I'm not aware of, etc.). Would appreciate any little help of sorting this problem out, the warranty ended so I don't know what am I gonna do if I don't get it fixed :/
Thanks.
=/
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
XYMan28 said:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Click to expand...
Click to collapse
The problem with the S3 is that there really aren't many options before the last option. From what I can see, you have already tried them all.
It tells me you haven't got SDS, but we already knew you had a NAND issue, regardless of that. It was just a matter of interest.
JJEgan said:
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
Click to expand...
Click to collapse
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
XYMan28 said:
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
Click to expand...
Click to collapse
It could be SDS. We've seen a few failures like this where download mode doesn't show SDS symptoms. It doesn't mean the result is not SDS. Its uncomfirmable.
SDS possible , Nand damaged itself possible but 90% of problems are user error .
That error is often in trying to smash their way out of trouble avoiding the simple correct method and throwing everything at the phone .Following stuff from multiple forums then asking help on XDA at the end when it is to late .
Whatever you have done in the past right or wrong does not matter it is now a service centre job .
Samsung generally offer 24 months limited warranty but would be likely to reject due to custom rom count .
jje