I bricked my phone so now touch doesn't work on my Galaxy S3. I want to use a windows tool Android Screencast so that I could still use my phone from my PC before I get the replacement part.
To be able to use it I have to enable USB debugging on my phone so that ADB will recognize my device. But as I said I cannot use touch screen. So is there another way to enable USB debugging? Or is there a ROM that has this function pre enabled?
alesko007 said:
I bricked my phone so now touch doesn't work on my Galaxy S3. I want to use a windows tool Android Screencast so that I could still use my phone from my PC before I get the replacement part.
To be able to use it I have to enable USB debugging on my phone so that ADB will recognize my device. But as I said I cannot use touch screen. So is there another way to enable USB debugging? Or is there a ROM that has this function pre enabled?
Click to expand...
Click to collapse
USB OTG cable + USB Mouse
Related
I have an LG L7 II Dual P715, and I was in 4.4.2 before, now I downgraded to Jellybean so that I'll be able to root it [I GOT THE KDZ FILE OF THE JB FIRMWARE FOR MY DEVICE FROM THIS LINK http://lg-phone-firmware.com/index.php?id_mod=21 ]. When I connected my phone to my laptop running windows 7 32-bit without turning on the USB Debugging yet and keep it in MTP connection, my phone got recognized immediately by the laptop (because i already had the drivers installed even before), but whenever I turn on the USB Debugging, when i connect it to my laptop, it just charges and it doesn't automatically enter the USB Connection Type where in i supposedly have to choose whether to use MTP connection or LG Software connection etc. unless I manually go to that section in the settings of the phone.
I have downloaded the driver of my phone. I even downloaded a universal driver of LG yet I still get the problem.
so basically, the problem is I CAN'T CONNECT MY PHONE TO MY LAPTOP IF IT'S IN A USB DEBUGGING MODE. I opened the Device Manager and I can't seem to find any trace of my device when it is in USB debugging mode Except if It is TURNED OFF.
What do you think is the problem with this? Is it my LG phone or the computer who has the problem? When I was in kitkat, I never experienced such issue, but when I flashed it back to JB, I cant rid of this problem anymore, PLEASE HELP, I badly want to connect my phone to the laptop while the USB Debugging is turned on.
heyimCHOLO said:
I have an LG L7 II Dual P715, and I was in 4.4.2 before, now I downgraded to Jellybean so that I'll be able to root it [I GOT THE KDZ FILE OF THE JB FIRMWARE FOR MY DEVICE FROM THIS LINK http://lg-phone-firmware.com/index.php?id_mod=21 ]. When I connected my phone to my laptop running windows 7 32-bit without turning on the USB Debugging yet and keep it in MTP connection, my phone got recognized immediately by the laptop (because i already had the drivers installed even before), but whenever I turn on the USB Debugging, when i connect it to my laptop, it just charges and it doesn't automatically enter the USB Connection Type where in i supposedly have to choose whether to use MTP connection or LG Software connection etc. unless I manually go to that section in the settings of the phone.
I have downloaded the driver of my phone. I even downloaded a universal driver of LG yet I still get the problem.
so basically, the problem is I CAN'T CONNECT MY PHONE TO MY LAPTOP IF IT'S IN A USB DEBUGGING MODE. I opened the Device Manager and I can't seem to find any trace of my device when it is in USB debugging mode Except if It is TURNED OFF.
What do you think is the problem with this? Is it my LG phone or the computer who has the problem? When I was in kitkat, I never experienced such issue, but when I flashed it back to JB, I cant rid of this problem anymore, PLEASE HELP, I badly want to connect my phone to the laptop while the USB Debugging is turned on.
Click to expand...
Click to collapse
If all you need is to root your device then you don't need USB debugging. You just need to use copy Framaroot's apk to your device and install it, and that you can do in MTP mode as well.
Digdis said:
If all you need is to root your device then you don't need USB debugging. You just need to use copy Framaroot's apk to your device and install it, and that you can do in MTP mode as well.
Click to expand...
Click to collapse
But what if for example I have to access the LG Mobile Support tool? (Although I don't need it right now, just in case) And it requires me a good working USB Debugging mode which is I really cant right now cause of a problem i dont even know how and why it exists, do you know how to solve it? Any idea?
heyimCHOLO said:
But what if for example I have to access the LG Mobile Support tool? (Although I don't need it right now, just in case) And it requires me a good working USB Debugging mode which is I really cant right now cause of a problem i dont even know how and why it exists, do you know how to solve it? Any idea?
Click to expand...
Click to collapse
Never had similar problems with the USB drivers nor needed LG's tools, so can't help you there.
Sent from my LG 714 via Tapatalk
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Trenter87 said:
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Click to expand...
Click to collapse
Same problem :crying:
Hello all,
I purchased this phone a month back and would like to install custom roms/root it etc.
I am unable to get my phone to enable USB debugging and allow access for my PC. (I have a unlocked bootloader). The notification (prompt) for USB Debugging which shows up the phone (asking if one wants to grant access or not) doesn't show up. Hence I am unable to use adb or fastboot to install TWRP.
I have tried using the cable provided by the company on both USB 3.0 & 2.0 ports to no avail.
I am aware that there is a "How to Guide" under the News/Discussions section. However, it hasn't helped me much.
Any possible solutions?
Thank you
PS- When I connect to pc using USB cable I get the prompt asking me if I want to use it for file transfer,PTP or no data transfer.
Are the drivers properly installed?
What does the device manager show, when your phone is connected via USB and USB debugging is switched on?
What happen if you type "adb shell" when your phone is connected?
Enable it in developer option
Allow USB debugging and USB debugging Security Settings) in Developer Options
Hello, I Have A Moto E2 2nd Generation Which Boots Up Completely Fine, But Its Display Is Gone. And I Cannot See Anything In Its Screen (But I Am Sure That It Boots Up) So, I Wanna Enable Usb Debugging And Mirror Its Screen In My Pc. But I Am Not Able TO Enable It. Once I Saw Something That Requires To Boot In Recovery Mode And From There We Can Enable USB Debugging But I Am Not Able To Go To Recovery Mode (But I Can Go In Fastboot Mode) Please Help I Wanna Do This, The Thing Shown In This Forum To Recover My Phone
https://forum.xda-developers.com/galaxy-s2/help/bypass-secure-usb-debugging-prompt-t2965462
But I Cannot Please Help!!
@YoYo178
On PC run
Code:
fastboot devices
to check for a valid connection. If phone is connected via USB with PC run
Code:
fastboot reboot
to leave fastboot mode ( means re-start phone normally )
Afterwards run
Code:
adb devices
to check for an established connection. If a connection got successfully established
then you force phone to run in adb-mode
Code:
adb shell "svc usb setFunctions adb"
adb reboot
Now you should be able to recover phone's user data. For example
Code:
adb pull /sdcard/DCIM %TEMP%
Code:
fastboot devices
yes it shows, done.
Code:
fastboot reboot
yes it reboots too.
Code:
adb devices
nah nothing shows in adb devices (USB Debugging Isn't Enabled)
And I Do Not Want To Recover Data, I Want To Mirror Its Screen. Well, There Is A Lil Bit Of Data Too.
I Want To Enable USB Debugging And
Code:
push adb_keys
file Which i got From A Authorised Device.
@YoYo178
You can't enable USB debugging by means of ADB: Having USB debugging enabled is THE requirement to make use of ADB.
YoYo178 said:
yes it shows, done.
...
Too.
I Want To Enable USB Debugging And file Which i got From A Authorised Device.
Click to expand...
Click to collapse
Hi there, I had the exact same problem with my moto e 2nd Gen LTE (surnia). First of all this isn't a software issue, it's a hardware one ! Displays on some of those phones were faulty and I had to take it to repair it (just to clarify).
I had an immense chance because just before that I installed a screen mirroring app. I opened it through Google now (it was 6 years ago lol) and blind clicked because I remembered the layout of the app.
If you didn't have that chance you can try with USB OTG cable to HDMI port, and connect your phone to a PC with an HDMI cable. I didn't tried that on mine, so idk if HDMI through OTG works. Good luck with that :good:
Raiz said:
Hi there, I had the exact same problem with my moto e 2nd Gen LTE (surnia). First of all this isn't a software issue, it's a hardware one ! Displays on some of those phones were faulty and I had to take it to repair it (just to clarify).
I had an immense chance because just before that I installed a screen mirroring app. I opened it through Google now (it was 6 years ago lol) and blind clicked because I remembered the layout of the app.
If you didn't have that chance you can try with USB OTG cable to HDMI port, and connect your phone to a PC with an HDMI cable. I didn't tried that on mine, so idk if HDMI through OTG works. Good luck with that :good:
Click to expand...
Click to collapse
yes i know it is a hardware fault. i want to enable USB Debugging And For That i Need To Go In Recovery Mode Which i Don't Know How To. So Just Tell Me How to Go To Recovery Mode In Moto e 2nd generation 3g Also, My Phone Is 3g Variant Which Doens't Support OTG.
I Have A Question.
What If I Download Stock Rom And Then edit build.prop (idk, somehow) To Enable USB Debugging And Then Flash It?
YoYo178 said:
yes i know it is a hardware fault. i want to enable USB Debugging And For That i Need To Go In Recovery Mode Which i Don't Know How To. So Just Tell Me How to Go To Recovery Mode In Moto e 2nd generation 3g Also, My Phone Is 3g Variant Which Doens't Support OTG.
I Have A Question.
What If I Download Stock Rom And Then edit build.prop (idk, somehow) To Enable USB Debugging And Then Flash It?
Click to expand...
Click to collapse
Sorry to hear it doesn't have OTG, I won't be able to help any further as I'm not experimented enough in that field, hope someone else will do tho.
Have a nice day anyway
Hi
Have honor 8 Pro. Screen broken and no display but phone is on only.
Need to take backup.
Adb don't show devices. Can't accept USB debugger
External display via type also don't work.
Mtp is not getting enabled when connect cable
@madroamer
I guess you'll not have any luck, this because USB mode ADB is basically the door to any Android device. Also take note that MTP only works if this USB mode got enabled on Android device.
madroamer said:
Hi
Adb don't show devices. Can't accept USB debugger
External display via type also don't work.
Mtp is not getting enabled when connect cable
Click to expand...
Click to collapse
If your bootloader is unlocked it might help, but this case smells like secure startup and I don't know if is it possible to bypass it by changing the boot, system, etc - whatever...
Used the USB-C to USB adapter from computer and connected a mouse to your phone. When the lock screen of your phone appeared, pit the code to unlock the screen. With this your will unlock the phone and turn on USB sharing.