[Q] [ Q ] Camera Failure following mskip Toolkit use to root - Galaxy S III Q&A, Help & Troubleshooting

US Cellular LTE SG3 - SCHR530, Was build ALK5 on 4.1.1 and was rooted (using free version mskip's Toolkit) and all was fully functional. When the 4.1.2 android update became available for my phone, I performed manual 4.1.2 download/installation, which completed successfully. Build AMD4.
Donated/upgraded to mskip's pro version Toolkit. Began the re-root - exact build wasn't listed, picked closest, completed process, phone was rooted BUT lost all access to camera and any apps that use camera failed due to camera fail. Unable to find a cure for this particular issue, I used the toolkit to unroot my phone. I RE-applied Samsung android update 4.1.2 and have remained UNrooted until last night.
Ran the Toolkit, toolkit auto-updated to the latest version released (says 4.1.2 build AMD4 is supported) , prepared to root phoneagain I find this exact build (AMD4) is not listed, so picked closest one, completed process, phone is rooted..... BUT AGAIN I have no use of camera!
How can I fix this and stay rooted? Or do I resign myself to not having a rooted phone in order to keep functionality of my camera?
Thanks for any helpful insights to this issue.

SAME issue
firstbrick said:
US Cellular LTE SG3 - SCHR530, Was build ALK5 on 4.1.1 and was rooted (using free version mskip's Toolkit) and all was fully functional. When the 4.1.2 android update became available for my phone, I performed manual 4.1.2 download/installation, which completed successfully. Build AMD4.
Donated/upgraded to mskip's pro version Toolkit. Began the re-root - exact build wasn't listed, picked closest, completed process, phone was rooted BUT lost all access to camera and any apps that use camera failed due to camera fail. Unable to find a cure for this particular issue, I used the toolkit to unroot my phone. I RE-applied Samsung android update 4.1.2 and have remained UNrooted until last night.
Ran the Toolkit, toolkit auto-updated to the latest version released (says 4.1.2 build AMD4 is supported) , prepared to root phoneagain I find this exact build (AMD4) is not listed, so picked closest one, completed process, phone is rooted..... BUT AGAIN I have no use of camera!
How can I fix this and stay rooted? Or do I resign myself to not having a rooted phone in order to keep functionality of my camera?
Thanks for any helpful insights to this issue.
Click to expand...
Click to collapse
I am having the exact same issue, I need my camera and my root, might have to go back to 4.1.1 to get it though.
I'm also on a donated toolkit, please post if you find a solution.

This is the i9300 forum, you are in the wrong place. Also have you tried contacting mskip to raise a query?

Re: Camera Failure following mskip Toolkit use to root
slaphead20 said:
This is the i9300 forum, you are in the wrong place. Also have you tried contacting mskip to raise a query?
Click to expand...
Click to collapse
Thank you for your acknowledgement, I truly appreciate it.
I did know this is the i9300 forum, and I have tried to contact mskip a number of times, including directly in the thread that the most recent toolkit was announced. Apparently I cannot post in there (?) due to not having enough posts and not being a developer; at least that's what the "error message" is when I tried. And then the advisement that I must post questions in a Q & A. I guess I'm lost!
In any case, I did several searches for the camera issue combined with rooting and I ended up in this forum. I would greatly appreciate it if you could steer me towards the proper place to post - I haven't seen a specific forum for the US Cellular model SG3, and I'll admit - I'm greatly out of practice these days in my forum using skills.

Follow up - help for root w/toolkit camera lost issue
firstbrick said:
Thank you for your acknowledgement, I truly appreciate it.
I did know this is the i9300 forum, and I have tried to contact mskip a number of times, including directly in the thread that the most recent toolkit was announced. Apparently I cannot post in there (?) due to not having enough posts and not being a developer; at least that's what the "error message" is when I tried. And then the advisement that I must post questions in a Q & A. I guess I'm lost!
In any case, I did several searches for the camera issue combined with rooting and I ended up in this forum. I would greatly appreciate it if you could steer me towards the proper place to post - I haven't seen a specific forum for the US Cellular model SG3, and I'll admit - I'm greatly out of practice these days in my forum using skills.
Click to expand...
Click to collapse
Still no love for my issue, and almost a month later, still the choice of root & no cameras or cameras & no root :crying:
Toolkit support says US CELLULAR MODEL LTE[SCH-R530] support should use AT&T, Rogers, Bell, Telus Samsung Galaxy S III forum, can anyone verify for me if that is the correct place to try to post about my problem? Thank you very much!

firstbrick said:
Still no love for my issue, and almost a month later, still the choice of root & no cameras or cameras & no root :crying:
Toolkit support says US CELLULAR MODEL LTE[SCH-R530] support should use AT&T, Rogers, Bell, Telus Samsung Galaxy S III forum, can anyone verify for me if that is the correct place to try to post about my problem? Thank you very much!
Click to expand...
Click to collapse
See sticky top of the page if its not in there try Google your model xda.
Apparently I cannot post in there (?) due to not having enough posts
you should have now
Try one of the other methods of root and recovery like TWRP .
Google finds
http://forum.xda-developers.com/wik.../SCH-R530#XDA-Developers_Forums_for_the_Phone

JJEgan said:
See sticky top of the page if its not in there try Google your model xda.
Apparently I cannot post in there (?) due to not having enough posts
you should have now
Try one of the other methods of root and recovery like TWRP .
Google finds
http://forum.xda-developers.com/wik.../SCH-R530#XDA-Developers_Forums_for_the_Phone
Click to expand...
Click to collapse
It does seem that most of that info is out of date and there is no real home for the US Cellular LTE Samsung Galaxy S3, and as far as the other methods, I am just not that savvy - the automated toolkit is slick, but I appreciate your suggestions. Thank you.

Related

[Q] Galaxy S2 ATT, which CF-Root?

Good Day!
I just picked up a shiney new Galaxy S II from ATT (from my iPhone 4). I've had various Android tablets, and rooted many droid phones (including the Vibrant I had a week).
However I'm unsure which CF-root to use with this baby, and I don't want to brick it.
Under Settings, About Phone this is what is listed.
Android Version
2.3.4
Baseband
I777UCKH7
Kernel Version
2.6.35.7
My understanding is the CF-Root I need would use KH7, but I haven't found one (at least in the CF-Root thread, but its 200+ pages long!)
Any information would rock my world and save quite a bit of time for me!
Thank you!
Hey there
XDA created a new forum for AT&T SGS2 located here http://forum.xda-developers.com/forumdisplay.php?f=1301 I just did a quick check and see a few rooting threads under development you might want to check out. This forum is for the international galaxy s ii so you most likely won't find the kernel you're looking for to root here since its technically a different model with the soft key buttons and all. I believe Codeworkx created a rooting solution over there
Hope this helps
Thank you, not 5 minutes after I posted this did I find the link to the other forums! rock on xda!
I just got it... can u send me the link?
I have the same problem, do you think you can send me the link to download it?? thanks!
Cf-Root fot ATT SGS2
I have the same problem, do you think you can send me the link to download it?? thanks!
Hi guys...I am a rookie in this items and fell the same problem to install ROMs or Kernel due to our SG2 from AT&T are coming with the 3er edition of the Recovery software that don't permit to open a zip files unsigned we have to downgrade to a 2nd edition using a Cf -Root and have a lot of files.
jcomana said:
I have the same problem, do you think you can send me the link to download it?? thanks!
Hi guys...I am a rookie in this items and fell the same problem to install ROMs or Kernel due to our SG2 from AT&T are coming with the 3er edition of the Recovery software that don't permit to open a zip files unsigned we have to downgrade to a 2nd edition using a Cf -Root and have a lot of files.
Click to expand...
Click to collapse
Dude, this is a 6 month old thread, and the ATT Galaxy s2 forum is linked in post 2 above.

Help Please : 2.3.6 -- 4.5.145 Bootloader unlock and Root HELP

Hi everyone,
I'm a complete noob when it comes to this stuff. Recently, my phone has been running really slow, and I remembered people saying that rooting and flashing custom roms will help increase the efficiency of the phone. I've been looking through tons of threads and countless google searches trying to find a tested and working method for BL unlock and root for a stock MB860 on Android 2.3.6 -- 4.5.145. Yet I haven't found anything. Can I get some suggestions/help? Thanks.
PS - I plan on getting the SGS4, but till I see some actual benchmarks/comparisons between the two chipsets that they phone is shipping with, I'll have to rely on my Atrix 4G. And right now, as I said earlier in the post, it's acting extremely sluggish in every sense of the word.
-Pat
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
robyn402 said:
check this out yet?
http://forum.xda-developers.com/showthread.php?t=1302423
Click to expand...
Click to collapse
Wow thanks. Everyone posting on there says it's real easy to use. Unfortunately no one has system version 4.5.145 like I do. I'm not sure how important that actually is but I have read that version does matter. But it is nice to see people have used it successfully used it with 2.3.6. I posted on that thread and am waiting for a response. Thanks again.

I am not dumb, I do need help with ROMs

I really need some help. I have read through most of the guides, and watched YouTube videos, but there is something I am missing or just not understanding. Does anyone have a step-by-step instruction guide for how to install a custom ROM to get my Vibrant from 2.3.6 to Android 4.4? So far, all I have succeeded in doing is bricking a phone, which fortunately, Samsung repaired for me. ANY help would be greatly appreciated!
scooty809 said:
I really need some help. I have read through most of the guides, and watched YouTube videos, but there is something I am missing or just not understanding. Does anyone have a step-by-step instruction guide for how to install a custom ROM to get my Vibrant from 2.3.6 to Android 4.4? So far, all I have succeeded in doing is bricking a phone, which fortunately, Samsung repaired for me. ANY help would be greatly appreciated!
Click to expand...
Click to collapse
I'm not 100%, but I don't believe you have a Samsung Vibrant. The Samsung Vibrant never received an official 2.3.6 update and even had you installed a custom 2.3.6 ROM I'm not too sure Samsung would repair a rooted/hacked phone (although you could have gotten lucky). What exactly is your phone's model number? If it's not "T959" (and instead is "T959V" or "I9000M", "I9000B", "I9000T", "I9000", etc.) it could explain why your phone bricked the last time you attempted to install a custom rom. If it is "T959" then let me know and I'll see if I can whip you up a guide. :good:
Wow, that is incredibly kind of you!!!:good:
My model number is SGH-T959V, Firmware version 2.3.6, Baseband T959VUVKJ6. I have ODIN, Heimdall, superoneclick, and CyanFox. Just don't know how to make them all work together.
Thank you again!
Ahh, I thought so.. Although the model number is similar to the Vibrant (SGH-T959), your device's model number is SGH-T959V, meaning the device in your possession is not a Vibrant. To be exact, your device is the Galaxy S 4G which has its own dedicated forum here. Vibrant ROMs won't work properly on your device, nor would Galaxy S 4G ROMs work properly on the Vibrant. Sorry bud. From what I see it doesn't appear that the GS4G has CyanFox available for it, however, it does appear to have quite a few other KitKat ROMs for you to tinker with, all of which can be found here.
Lastly, it may not hurt to repost your question here. By posting it in the GS4G forum I'm sure you'll get the help you're looking for.

[Q] Samsung Galaxy S3 i9300t Rooting

I have a samsung i9300t running the new android 4.1.2 that came out last November, having trouble rooting it tho, I've tried framaroot, none of them work and I don't want a root that requires flashing. Could someone help find a root for me thanks,
Nathan
Questions in the q&a forum, you will have to flash you want root. Read the guides.
ranga9800 said:
I have a samsung i9300t running the new android 4.1.2 that came out last November, having trouble rooting it tho, I've tried framaroot, none of them work and I don't want a root that requires flashing. Could someone help find a root for me thanks,
Nathan
Click to expand...
Click to collapse
If you're still at 4.1.2, lucky you. (Don't upgrade to 4.3 unless you're sure you like all the changes. I personally hate quite a few of them except some layout changes)
Toolkit by mskip is REALLY good. I wish I could still use mine though. http://forum.xda-developers.com/showthread.php?t=1703488
I'll just quote this from many users. Read carefully and it'll provide you with some basic knowledge of what to expect and what procedures to take before attempting anything
EFS is really important, you should backup it first thing after rooting.
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221

[Q] Advice on Atrix 4G Root/Unlock/ROM

I know there are a thousand threads on Rooting/Unlocking and Custom ROM's for the Atrix, because I've spent the last 3 days reading every one I could find. However, most of them appear to be very dated and often conflicting. As I'm coming to the game a little late I was hoping for some assistance on how to proceed.
Here's what I have;
AT&T Motorola Atrix 4G (I bought this new under contract, kept it for 2 years, upgraded to another phone and this one has been a paperweight for the past 18 months) AT&T will give me an unlock code if I ask, but I'm a little confused by the conflicting reports on whether to do it this way or not.
It's an MB860
FW Version 4.5.141
OS Version 2.3.6
Baseband N_01.77.37P
Webtop WT-1.2.0-110_OLY-6
Kernel Version 2.6.32.9
Build 4.5.141
I'd like to Unlock it so I can run a Foreign SIM card, I'd like to Root it so I can add non-approved apps, and I'd like to play with some ROM's, Redpill has some very good user reviews so I'm thinking of giving it a try but I'm not stuck on it.
Obviously don't want to brick the phone, so any advice would be appreciated, the more detailed the better
I have Windows 8.1, Mac OS X, and Windows XP-SP3 computers to work with.
Thanks in advance for any assistance.
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
As for rooting, regardless of the variant or firmware version of your device, the preinstall method is the one to use. By far the most universal, plus personally and generally I dislike any "automatic", "one-click" or similar methods - for me at least they are usually more trouble than they're worth.
As for playing with ROMs, you first need to unlock your BL, then install a custom recovery, and then you have a shot at ROMs. So quite a wide topic with plenty enough threads created on the subject, so no point in repeating what's already said countless times. By the time you're done with other things mentioned (SIM unlock, rooting) you should be able to find your way around.
Sequence
ravilov said:
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
Click to expand...
Click to collapse
Thanks for the quick reply. I've requested an unlock code from AT&T, should be good to go in 48 hours.
In the mean time, is it important that I have it unlocked before I root, or will it matter?
Update
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
arkansascontrols said:
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1302423
I just did it with my old A4G. No issues exist in procedure.
Motorola Atrix KCC-MB860- rom
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
manoj panay said:
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
Click to expand...
Click to collapse
Meanwhile you have ROMs all over the place here in the Atrix 4G section of xda that you are not going to go download, rather you are going to request a ROM for the phone instead. Head over to the development section and download a ROM instead of requesting the necessary resources that are already available to you.
Sent from my ATRIX HD using XDA Free mobile app
help me recover my phone
i downloaded and tried to flash with lots of rom.... non of them was working with this model .... please help me. . . . i was rooted and unlocked the boot loader and erased the original rom to flash the downloaded rom . . . know non of the rom in this site is working and in my phone only hardware is remaining, i mean it is not bricked , i can boot it and i can go to fastboot mode, android recovery mode, rsd mode,, atc.... actually i want suitable ram for that model so please......
my phone model: kcc-cmm-mot-w-mb860-0211 ( and all the remaining thing are written in Chinese ) it is a unlocked phone and am using in india . . .

Categories

Resources