Here is a guide to rooting the Medion E4002 Android Dual Sim Phone.
First you need the following tools installed which can be sourced from the following links:
1. USB Preloader Drivers -> http://forum.xda-developers.com/showpost.php?p=38868757&postcount=1
2. MTK ADB Android Drivers - > http://gizbeat.com/1273/pdanet-adb-auto-driver-for-windows/
3. MtkDroidTools -> http://forum.xda-developers.com/showpost.php?p=43512610&postcount=311
4. SP Flash Tool -> http://forum.xda-developers.com/showthread.php?t=1982576
Follow steps from the following URL to create the custom ClockworkMod Recovery for the Medion E4002:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
On step 4, the Medion E4002 is a phone with EXT4 blocks, so use the cache block address from the scatter file as the Length.
Step 5 is not required for the Medion E4002 as it uses EXT4 blocks.
Make sure you follow the instructions carefully as an error could brick the phone.
Once the Custom ClockworkMod Recovery is downloaded onto the phone, you can then boot into the Recovery by holding Vol+ and the Power button together.
Using CWM Recovery, make a backup so you can restore the phone if required.
While still in CWM Recovery, run MtkDroidTools.
On the 'root,backup,recovery' tab, click on the SuperUser button which will install SuperUser and root the phone.
Remember, there is always a risk of bricking a device when rooting or loading new firmware so use at your own risk.
Update: Here is the Recovery that includes ClockworkMod Recovery that I used to download to my phone along with the scatter file that was used.
Thanks for this Athua, it's good to know it's possible to get root on this phone. I'll give it a go in the next couple of days. Hope you're around to help when I get stuck!
Cheers.
Thanks athua for doing all the hard work ... but im getting stuck.
athua said:
Here is a guide to rooting the Medion E4002 Android Dual Sim Phone.
....
Follow steps from the following URL to create the custom ClockworkMod Recovery for the Medion E4002:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Click to expand...
Click to collapse
Im getting stuck at the start of making CWM recovery ... I just will not boot properly
this is the first time I have rooted a phone without a scripted setup. so please be kind on the noob
Marteni said:
I'll give it a go in the next couple of days.
Click to expand...
Click to collapse
Any luck ???
JDaus said:
Im getting stuck at the start of making CWM recovery ... I just will not boot properly
Click to expand...
Click to collapse
As I have included the CWM recovery I used, there is no need to make it again. You can use the recovery and scatter file from the first post and download it to your phone using the Flash Tool.
The trick is that the phone needs to be completely powered off when using the SP Flash Tool. It even works without the battery in the phone.
athua said:
Here is a guide to rooting the Medion E4002 Android Dual Sim Phone.
First you need the following tools installed which can be sourced from the following links:
1. USB Preloader Drivers -> http://forum.xda-developers.com/showpost.php?p=38868757&postcount=1
2. MTK ADB Android Drivers - > http://gizbeat.com/1273/pdanet-adb-auto-driver-for-windows/
3. MtkDroidTools -> http://forum.xda-developers.com/showpost.php?p=43512610&postcount=311
4. SP Flash Tool -> http://forum.xda-developers.com/showthread.php?t=1982576
Follow steps from the following URL to create the custom ClockworkMod Recovery for the Medion E4002:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
On step 4, the Medion E4002 is a phone with EXT4 blocks, so use the cache block address from the scatter file as the Length.
Step 5 is not required for the Medion E4002 as it uses EXT4 blocks.
Make sure you follow the instructions carefully as an error could brick the phone.
Once the Custom ClockworkMod Recovery is downloaded onto the phone, you can then boot into the Recovery by holding Vol+ and the Power button together.
Using CWM Recovery, make a backup so you can restore the phone if required.
While still in CWM Recovery, run MtkDroidTools.
On the 'root,backup,recovery' tab, click on the SuperUser button which will install SuperUser and root the phone.
Remember, there is always a risk of bricking a device when rooting or loading new firmware so use at your own risk.
Update: Here is the Recovery that includes ClockworkMod Recovery that I used to download to my phone along with the scatter file that was used.
Click to expand...
Click to collapse
Thanks a Ton Mate, worked like a charm on the first go!
FACTORY ROM or BACKUP for Medion E4002
hi guys, I need to restore my phone but I have no backup
can anyone provide a FACTORY ROM or BACKUP for Medion E4002, ...
thanks
[email protected]
Instructions work great. For anyone with the OTA update, the original scatter file is identical to the one generated after doing the update so no need to repeat those steps when re-routing.....at least on my phone.
rooting E4002 Stuck at last part please help!!
athua said:
Here is a guide to rooting the Medion E4002 Android Dual Sim Phone.
First you need the following tools installed which can be sourced from the following links:
1. USB Preloader Drivers -> http://forum.xda-developers.com/showpost.php?p=38868757&postcount=1
2. MTK ADB Android Drivers - > http://gizbeat.com/1273/pdanet-adb-auto-driver-for-windows/
3. MtkDroidTools -> http://forum.xda-developers.com/showpost.php?p=43512610&postcount=311
4. SP Flash Tool -> http://forum.xda-developers.com/showthread.php?t=1982576
Follow steps from the following URL to create the custom ClockworkMod Recovery for the Medion E4002:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
On step 4, the Medion E4002 is a phone with EXT4 blocks, so use the cache block address from the scatter file as the Length.
Step 5 is not required for the Medion E4002 as it uses EXT4 blocks.
Make sure you follow the instructions carefully as an error could brick the phone.
Once the Custom ClockworkMod Recovery is downloaded onto the phone, you can then boot into the Recovery by holding Vol+ and the Power button together.
Using CWM Recovery, make a backup so you can restore the phone if required.
While still in CWM Recovery, run MtkDroidTools.
On the 'root,backup,recovery' tab, click on the SuperUser button which will install SuperUser and root the phone.
Remember, there is always a risk of bricking a device when rooting or loading new firmware so use at your own risk.
Update: Here is the Recovery that includes ClockworkMod Recovery that I used to download to my phone along with the scatter file that was used.
Click to expand...
Click to collapse
I cannot connect phone to MtkDroidTools when phone is in CWM, I cannot get the Backup or superuser buttons to work :silly: your help would be grateful and thankyou for the great info shown thus far top stuff...
fitzy71 said:
I cannot connect phone to MtkDroidTools when phone is in CWM, I cannot get the Backup or superuser buttons to work :silly: your help would be grateful and thankyou for the great info shown thus far top stuff...
Click to expand...
Click to collapse
Make sure you have the following drivers installed otherwise the phone will not be recognised when connected via USB:
2. MTK ADB Android Drivers - > http://gizbeat.com/1273/pdanet-adb-a...r-for-windows/
More detail
Hi Athua
Thanks for these instructions. But it would be great if you can rewrite them with a bit more detail. I'm getting very confused between your instructions and the instructions of the other forum's link that you've incorporated.
Also, do the text-file and image-files that you've included at the bottom of your post, override any of the other instructions? And if so, which ones?
hey,,
i recently bought Medion P4501 i rooted it already but i need cwm or any recovery will this cwm recovery would work on P4501 device?
Original file
Hi
Can some samartian post backup of Medion ROM. got blank screen after following the steps. maybe i have used the latest version of SP tools.
or PM please if they have. i will send email ID.
Thanks
Need help restoring Medion E4002
Through the incorrect use of SPTools I have managed to get my phone into the state that it won't boot, charge or even be recognized by the device manager in windows. Prior to my screwup I was seeing the Mediatek USB VCOM in device manager now I get nothing.
The reseach I have done suggests that I will have to find a test point and short it to ground. Question I have is there anybody out there know where this test point can be found OR is there an other way to go about this.
Any help will be appreciated ....
Hey guys,
a colleague of me asked me how to root his Medion E4005. Is it the same procedure like with the E4002?
Thanks.
help, please. my medion E4002 phone has looked .its asking to give email and password. but data connection is not on so I can not sign in .i also can not able to on data connection. So I need to hard reset .but how to hard reset??? please write soon to [email protected]
TimeTurn said:
Hey guys, a colleague of me asked me how to root his Medion E4005. Is it the same procedure like with the E4002? Thanks.
Click to expand...
Click to collapse
Update: kingRoot is working now.
Related
Anyone can help will be very much appreciated.
It is this model = http://www.lelong.com.my/zte-v793-a...alcatel-hidamari-129512382-2014-05-Sale-P.htm
I also have this phone and still looking for a working method to root it. Please share the info if you know. Thank you.
ZTE V793 rooted
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
zte v793
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
1. Can u teach me how to root zte v793 step by step and give also download link?
2. I also have another problem : after update zte v793 my phone keep restarting...
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
Hi
Can you teach us step by step to root zte v793 and the link to download the software you use.
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
edit: I also in need of usb driver for this phone because whenever I switch off phone for Flash tool, my XP laptop always ask for drivers of which I don't have.
Thank you in advance. I'll wait for your files and guidance to do it. :good:
Dear all,
my method ultimately becomes obselete now. to root, you can just use one of these 2 methods:
1. Ishuaji
2. e-root
the supersu included is in chinese, so you might need to flash CWM to change to english supersu.
as for flashing CWM, you can find tutorials using Mobileuncle.
thanks!
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about this custom CWM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
All the files needed are in this google drive folder:
https://drive.google.com/folderview?id=0BzFjevWXftUyY3RQUlZjZ2s1QjA
Detail of files:
1. zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip
USB VCOM driver. needed when you want to flash the phone (This is when you strip the battery off the phone and connect it to USB). this driver is unsigned, so for win8 users, pls google how to install unsigned drivers.
2. SP Flash Tool v3.1216.05.7z
Flashing tool. you need this to flash the custom CWM attached.
3. MT6575_Android_scatter.txt
Device-specific memory map. we need this to tell SP flash tool where to put the custom CWM when flashing.
4. ZTE-V793_130615__recovery_130802-123951.img
Custom CWM generated from my phone (ZTE V793) bought from Happy Mobile (DiGi) under SKMM package.
DISCLAIMER: this is generated from my phone's settings and intended only for my phone's usage. I will not be responsible for any damage caused by your act of flashing this file onto your phone.
I successfully generated the file using the tutorial from a russian site
http://forum.china-iphone.ru/viewtopic.php?p=496116#p496116
also an xda tutorial here
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
You can generate your own CWM using tutorials above, but if you agree with the disclaimer, you can use the custom recovery attached. With no warranties, of course.
5. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip
The rooting tool to be installed by our custom CWM to the phone to obtain root
Click to expand...
Click to collapse
Method:
This can be divided into several process:
1. Download all related files
2. Install Driver
3. Flash custom CWM
4. Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
1. Download all related files
Pretty self explanatory. Download and extract all files.
First, download and install USB Driver:
http://www.mediafire.com/download/f7h1f7i7skggmtg/ZTE+Driver.rar
2. Install Driver
We need 2 drivers to be installed:
- ZTE_Handset_USB_Driver.exe
- JoinMe_for_Android.exe
the Joinme driver is needed when flashing custom CWM. However, it didn't work for me. so I installed zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip manually. To install it, remove battery from phone, connect to usb. Wait for computer to start searching for drivers, select Browse for drivers and select the vcom drivers downloaded.
3. Flash custom CWM
1. Open Flash_tool.exe from SP Flash Tool v3.1216.05 folder extracted earlier.
2. Click "Scatter-loading". Select "MT6575_Android_scatter.txt" that you downloaded earlier.
View attachment 2159248
3. Click to deselect ALL checkboxes in the list. ONLY TICK RECOVERY.
View attachment 2159266
4. Double click on the word RECOVERY and select "ZTE-V793_130615__recovery_130802-123951.img" downloaded earlier
View attachment 2159267
5. Click Download. A warning will pop up "Not ALL images are correctly loaded blah blah blah". just click Yes.
View attachment 2159283
6. If you see below the application, it will say "Searching" next to NAND. Time to plug in your phone. DON'T FORGET TO REMOVE THE BATTERY BEFORE PLUGGING IN YOUR PHONE.
View attachment 2159284
View attachment 2159285
7. Now you're done flashing, it's time to boot into CWM. Unplug the phone from USB. Put on battery. Press Vol+ & Power Button simultaneously. When ZTE logo appear, RELEASE ALL BUTTON.
8. Let's hope you boot straight into CWM
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
1. Copy the "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" onto the root of SD Card on your phone as normally you would (I wouldn't elaborate since this is android 101 knowledge)
2. Boot into Clockworkmod (CWM) recovery. To do this, turn off your phone normally. 5 seconds after the phone vibrates (fully off), press volume up (vol+) and power button. Wait until ZTE logo appears, then release both buttons.
If you do this correctly, you will see "CWM v 5.5.0.4 for ZTE V"
to navigate, use volume up (vol+) & volume down (vol-). to select, use power button.
3. Select "install zip from SD CARD" > "Choose zip from sdcard" > Look for "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". REMEMBER: Navigate using volume button, select using power button.
then, confirm by selecting "Yes - Install Root_Superuser_" and pressing power button.
when completed, go back to main menu and select reboot.
if nothing goes wrong, you will see SuperUser and busybox icon in your App drawer.
UPDATE:
12082013 - finished 4th item - install root & busybox
todo - revise SP Flash tool version
kokokranc said:
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
Hi kokokranc..appreciate if you could continue
Will Try
kokokranc said:
First, disclaimer:
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
want to try it after buaka puasa :laugh:
error
got this error
maybe it because my pc just detects then undetects preloader drivers
my phone cannot power after format using spf tools
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Cannot On
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
same here
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
When the red bar reaches 100% just disconnect and reconnect phone before timeout.
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 02:54 AM ---------- Previous post was at 02:49 AM ----------
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
saifudinbesoot said:
same here
Click to expand...
Click to collapse
Log file from spf tool?
Sent from my GT-I9500 using xda app-developers app
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
pls continue to Install Root & Busybox zip file using CWM
sadmanex said:
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
pls continue to Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Error 8038
Please help, my phone is still OK, can ON, but I got this error. I've tried another version of SP Flash Tool but still got the same error..
Root Success
kokokranc said:
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
.
.
.
.
[COLOR="Red"][B]4. Install Root & Busybox zip file using CWM[/B][/COLOR]
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks[/QUOTE]
Of course you can. Btw, I successfully root my phone using your recovery.img and scatter file. The only thing I need to change is SP Flash Tool. I downloaded new version SP_Flash_Tool_v3.1224.01, because your provided version doesn't work for me.
Anyway, thank you very much for all the files.
Click to expand...
Click to collapse
kokokranc said:
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Click to expand...
Click to collapse
yes
and can on/start my phone normally
just use new SP_Flash_Tool_v3.1224.01 (download at softpedia)
cannot on phone
some have link to download PRELOADER image?plzzz share...my phone cannot on after flash format...
saifudinbesoot said:
same here
Click to expand...
Click to collapse
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
remove your battery and replace it again, and then turn on. I got the same problem back then and those steps worked for me.
So. I deceided to join this forum in order to ask for some help from all those people I saw while searching the net.
I have to admit I am quite a noob with mobile systems, although I have gone way too far the last 3 days!
Here is the problem: I have an mt6575 processor phone in which want to add Greek Language settings. I have downloaded a folder form the manufacture's site, but it didn't contain any instructions. Just some .bin files (ALICE.BIN VIVA.bin, SANSTAR50_6464_11B_BOOTLOADER_V005_MT6250_MAUI_11B_W11_32_SP_V1.bin and ZIMAGE_ER.bin)and a scatter file that can not be read by flash tool (scatSANSTAR50_6464_11B.txt).
After a lot of reading around here and a lot of other forums and sites I realised that in order to do anything, I had to root my phone. I wasn't able to do it through superclick or mtk droid tools so I followed the instructions I found here:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
However, I am stuck on the final step.. I can't seem to get my phone on cwm mode... In fact I am not sure I know what exactly this is. I manage to open my phone on the android recovery utility but I am not able to make any choice. Everytime I press some of the menu's choises an android robot with an exclamation mark fills the screen and nothing happens...
Anyway..even if I manage to finalize the rooting process.. I still don't know what to do with the files I have... should I use them somehow on flash tool?
By the way.. The files come with a tool called Multiport Download Flash Tool which looks like Sp flash tool but has too many port options.
I'd be glad if someone helped me with this!
Thank you in advance,
Irene
1. Dump your stock recovery image then make a cwm or twrp (preferably twrp) from yueweng's thread for mediatek devices via old cwm or twrp port tool
2. Flash it via sp flash tool (download MTK 6575 scatter from internet)
3. Then reboot into recovery and if in twrp then reboot and it will ask you to root it or not
Or
If in cwm then download supersu Flash zip file and flash it
You have root access now
Press thanks if helped
Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk
Hi!
I tried many apps to root my phone, but nothing has worked.
Is there any chance to get root permission for Mediacom PhonePad Duo S520? I'm on Lollipop 5.1.
Please help. :crying:
Thank you.
BigCityKnight said:
Hi!
I tried many apps to root my phone, but nothing has worked.
Is there any chance to get root permission for Mediacom PhonePad Duo S520? I'm on Lollipop 5.1.
Please help. :crying:
Thank you.
Click to expand...
Click to collapse
Same for me! I tried several solutions from software to manual root... No success!!!
I really hope someone will develop a root for this device
dannyo2 said:
Same for me! I tried several solutions from software to manual root... No success!!!
I really hope someone will develop a root for this device
Click to expand...
Click to collapse
I hope so. ?
Finally I succeed in installing a non standard recovery and in getting root permission.
I don't know if someone is still interested in such device, but here is the material you need.
In the enclosed zip you'll find:
recovery.img: it's a PhiltZ touch recovery (based on CWM), the only one I got working because it uses the phisical buttons of the phone. In this device the touch is not working in recovery mode. I tested all the main functions (wipe, install, backup e restore), and they are all working, the minor ones are untested. This recovery reads and writes only from internal storage (not from the external SD). To install it, you need "SP Flash Tool", which can be downloaded from Mediacom site, in the relative device page.
MTK_AllInOne_DA.bin e MT6735M_Android_scatter.txt: are the "download-Agent" and the "Scatter loading file" you have to use in SP Flash Tool to flash the recovery. The scatter file is already setted to flash only the recovery, not other parts of the firmware. Be sure, before flashing, that only recovery item is checked in the Download page of SP Flash Tool, with the proper recovery path in "Location".
BETA-SuperSU-v2.52.zip: it's the zip archive to get root permission. Install it via recovery, after you have tested that the recovery is working for you.
recoveryORG.img: it's the original recovery, for restoring purposes. Install it (if you need to restore your phone to the original state) with SP Flash Tool, in the same way.
N.B.: Of course, I do not take any responsabilities about brick or problems may occur to your phone after using this material. . If you decide to use it, you do at your risk, aware that this type of changes always involves a minimum of risk if something goes wrong.
Herewith enclosed the archive:
Recovery_SU.zip - 24.9 MB
i downloaded the custom recovery for t20 (TWRP-3.2.3-TwrpBuilder-t20-2019-01-18_20-02) from gethub "i cant attach the link because of the forums rules"
then flashed it using fastboot , but then the tablet didn't boot into normal mode but i was getting the boot mode selection when i hold the (power + volume up) which gave me access to recovery mode and fastboot mode
the problem is that this custom recovery had issues with the touch screen and was basically not usable .
so i switched the phone into fastboot and i flashed the patched boot image that was working before but the tablet still didn't boot into normal mode , then i flashed the stock recovery image and now every thing gone .
the tablet has no options to boot into fastboot or recovery anymore.
basically the tablets boots and i get the teclast logo then the image of the broken android with a "no command" on screen and nothing else
i tried holding the volume up and plug in the usb-c cable but i got the same broken droid
holding volume up and power doesn't give the options for boot modes anymore
i would appreciate any help a this moment , thanks
hany20006 said:
i would appreciate any help a this moment , thanks
Click to expand...
Click to collapse
SP Flash tool should help you. Install stock firmware and everything should be restored, a device on MTK isn't so easy to kill. Just check the revision of your device (E1 or E2, on the back cover). I tried this TWRP and already spoke of that control it only with mouse (https://forum.xda-developers.com/showpost.php?p=78710093&postcount=5). I have my own version of the TWRP (3.2.2), there's also a problem with orientation of the screen. But PhilZ recovery works without problems, the management of keys.
ViAlexSt said:
SP Flash tool should help you. Install stock firmware and everything should be restored, a device on MTK isn't so easy to kill. Just check the revision of your device (E1 or E2, on the back cover). I tried this TWRP and already spoke of that control it only with mouse (https://forum.xda-developers.com/showpost.php?p=78710093&postcount=5). I have my own version of the TWRP (3.2.2), there's also a problem with orientation of the screen. But PhilZ recovery works without problems, the management of keys.
Click to expand...
Click to collapse
thanks for the reply my version is E2
i tried flashing the stock but i keep getting an error that the preloader file is not valid . can u upload yours so i can try with it
hany20006 said:
my version is E2
Click to expand...
Click to collapse
Here's firmware T20 (T2E2)-Android7.1.1_V1.02_8F48 specifically for revision E2: Chinese storage or my Y.Disk
If stock firmware doesn't help you, here's my read preload-partition, I have E2 (I hope you know how to restore it in SP Flash Tool using Write Memory option).
Partition address and size:
Code:
linear_start_addr: 0x0
physical_start_addr: 0x0
partition_size: 0x40000
ViAlexSt said:
Here's firmware T20 (T2E2)-Android7.1.1_V1.02_8F48 specifically for revision E2:
If stock firmware doesn't help you, here's my read preload-partition, I have E2 (I hope you know how to restore it in SP Flash Tool using Write Memory option).
Partition address and size:
Code:
linear_start_addr: 0x0
physical_start_addr: 0x0
partition_size: 0x40000
Click to expand...
Click to collapse
thank you very much for providing the y.disk link , i spent the whole yesterday searching for a way to download from baidu without luck.
i managed to flash the stock software (using format all +download) and it worked and now the tablet is up and running (unfortunately its chines ) i changed the language but there is bits here and there with chines still i cant complain.
there is no recovery image with this tablet , do u think i should flash the twrp recovery even if it has touch issues.
i cant thank u enough for your help
have a nice day
hany20006 said:
do u think i should flash the twrp recovery even if it has touch issues
Click to expand...
Click to collapse
See here: https://forum.xda-developers.com/showpost.php?p=78758523&postcount=7
ViAlexSt said:
See here: https://forum.xda-developers.com/showpost.php?p=78758523&postcount=7
Click to expand...
Click to collapse
yeah i just rooted the device and then flashed the recovery using the Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek (TWRP 3.2.1-0)
the touch screen is till having issues , but i guess i have to use mouse as you said
Hey guys, have either of you had trouble using the flash tool to flash the patched boot image from Magisk? it will not flash no matter what I do. I just get a red bar .... THanks
Draiter said:
Hey guys, have either of you had trouble using the flash tool to flash the patched boot image from Magisk? it will not flash no matter what I do. I just get a red bar .... THanks
Click to expand...
Click to collapse
Those are the notes i made for my self regarding your issue:
at the end we may get an error when flashing the patched-boot.img using sp flash tool
so we need to use fastboot instead
first we need to install ADB and fastboot in the PC (follow link bellow):
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
then power off the device then (hold the volume up+ power ) to enter the BOOT mode (the usb must be disconnected)
then select the fastboot from the menu
then we can use the commands :
#fastboot flash boot c:/patched_boot.img --> make sure the image is in the C folder
if this failed we need to unlock the OEM
#fastboot oem unlock -- > then confirm from the tablet
then try again
#fastboot flash boot C:/patched_boot.img
and when its done we can issue the command for restarting tablet
#fastboot reboot
hany20006 said:
Those are the notes i made for my self regarding your issue:
at the end we may get an error when flashing the patched-boot.img using sp flash tool
so we need to use fastboot instead
first we need to install ADB and fastboot in the PC (follow link bellow):
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
then power off the device then (hold the volume up+ power ) to enter the BOOT mode (the usb must be disconnected)
then select the fastboot from the menu
then we can use the commands :
#fastboot flash boot c:/patched_boot.img --> make sure the image is in the C folder
if this failed we need to unlock the OEM
#fastboot oem unlock -- > then confirm from the tablet
then try again
#fastboot flash boot C:/patched_boot.img
and when its done we can issue the command for restarting tablet
#fastboot reboot
Click to expand...
Click to collapse
Hey thanks for the quick reply, I will give it a go
Sent from my SM-G935F using Tapatalk
Got the boot.img flashed and recovery flashed (Phil's), but cannot do a full backup in recovery, cannot Mount data.
Have you been able to do a full backup?
Sent from my SM-G935F using Tapatalk
Draiter said:
cannot Mount data
Click to expand...
Click to collapse
Standard phenomenon for Nougat/Oreo: to mount a partition /date, must first format it. With loss of user data!
Some TWRP editions don't require this, /data mounted.
Hello.
Thanks ViAlexSt for the help, but I´m still having problems with root
, I try with (MTK) Auto TWRP recovery porter and with MTK Auto Philz recovery porter, with success only with TWRP.
Wiith Philz only get into recovery, when go to the OS the screen freeze with Teclast Logo in red.
With TRWP have an error, not able to mound device.
Is no possible install zip or create a backup.
Any idea??
I have a T20 T2E1
Thanks
I format with SPFlashtool with format+flash option, but not work, no backup, no any wipe.
Still with message Unable to mount parition.
I will try with an older version OF TWRP.
Some screenshots.
Thanks
https://photos.app.goo.gl/qwmLqnhxVk8vRmWA8
https://photos.app.goo.gl/VP5vJCDC7HaDpgaB8
AWLanzarote said:
Still with message Unable to mount parition.
Click to expand...
Click to collapse
Did you manage to do it? It's necessary to format the partition from CWM/TWRP!
Do you need additional explanations?
ViAlexSt said:
Did you manage to do it? It's necessary to format the partition from CWM/TWRP!
Do you need additional explanations?
Click to expand...
Click to collapse
Thank you very much for yor reply.
Yes I try formating with twrp but the same problem, at the end I take the risk and use a downloanble image "TWRP-3.2.3-TwrpBuilder-t20-2019-01-18_20-02". The one generated with the porter doesn´t work for my Teclast T20 (T2E1).
With this one "TWRP-3.2.3-TwrpBuilder-t20-2019-01-18_20-02.img works at the first".
And after that I was able to install "Magisk-v18.0.zip" and "no-verity-opt-encrypt-6.0.zip".
And finally I get root access, but after a wile I see the propblem with the IMEI wich was Inavild, after try with many options like generate the file MP0B_001, use Uncletools, droid tools, and many other Apps.
Finally today... I found a solution in a Spanisf Forum Dual Sim, Thanks to user "pedrogem" the most easy way to set an IMEI.
https://play.google.com/store/apps/details?id=com.rungetel.ghostphone&showAllReviews=true
Many Thanks..
AWLanzarote said:
Thank you very much for yor reply.
Yes I try formating with twrp but the same problem, at the end I take the risk and use a downloanble image "TWRP-3.2.3-TwrpBuilder-t20-2019-01-18_20-02". The one generated with the porter doesn´t work for my Teclast T20 (T2E1).
With this one "TWRP-3.2.3-TwrpBuilder-t20-2019-01-18_20-02.img works at the first".
And after that I was able to install "Magisk-v18.0.zip" and "no-verity-opt-encrypt-6.0.zip".
And finally I get root access, but after a wile I see the propblem with the IMEI wich was Inavild, after try with many options like generate the file MP0B_001, use Uncletools, droid tools, and many other Apps.
Finally today... I found a solution in a Spanisf Forum Dual Sim, Thanks to user "pedrogem" the most easy way to set an IMEI.
https://play.google.com/store/apps/details?id=com.rungetel.ghostphone&showAllReviews=true
Many Thanks..
Click to expand...
Click to collapse
Are you able to make a T20 root step by step guide with all the necessary download's (patched boot.img included) ?
would be very appreciate.
regards
toxstoxs said:
Are you able to make a T20 root step by step guide with all the necessary download's (patched boot.img included) ?
would be very appreciate.
regards
Click to expand...
Click to collapse
Hi toxstoxs.
Is already done in this link with all the downloads https://romprovider.com/2019/01/teclast-t20-root-twrp/.
I follow these steps exept the use of adb. In stead, I used SP Flash Tool, the utility included in the the original ROM which you can download from the official Teclast website.
Be sure to make the backups mentioned in the procedure NVRAM and nandroid, in case you lose your IMEI you will need restore the NVRAM backup.
With SP flash tools, upload the recovry.img "the downloaded TWRP from the link above" and your boot.img "patched on your device with magisk manager from you original"
I use the boot image from the original rom downloaded from Teclast, which I flash previously.
Be sure to make the backups mentioned in the procedure NVRAM and nandroid, in case you lose your IMEI you will need restore the NVRAM backup.
Just take in mind... touch screeen is not working well in TWRP you should use a mouse, the touch screen is in portrait possition but wou will see the screen in landscape, I do it without a mouse but is not easy, if you can get a mouse will be bether.
Regards.
AWLanzarote said:
Hi toxstoxs.
Is already done in this link with all the downloads https://romprovider.com/2019/01/teclast-t20-root-twrp/.
I follow these steps exept the use of adb. In stead, I used SP Flash Tool, the utility included in the the original ROM which you can download from the official Teclast website.
Be sure to make the backups mentioned in the procedure NVRAM and nandroid, in case you lose your IMEI you will need restore the NVRAM backup.
With SP flash tools, upload the recovry.img "the downloaded TWRP from the link above" and your boot.img "patched on your device with magisk manager from you original"
I use the boot image from the original rom downloaded from Teclast, which I flash previously.
Be sure to make the backups mentioned in the procedure NVRAM and nandroid, in case you lose your IMEI you will need restore the NVRAM backup.
Just take in mind... touch screeen is not working well in TWRP you should use a mouse, the touch screen is in portrait possition but wou will see the screen in landscape, I do it without a mouse but is not easy, if you can get a mouse will be bether.
Regards.
Click to expand...
Click to collapse
I went troght that step by step guide but :
1) into Pre requirement steps, i made a NVRAM backup with SP Tool.
step 2 is not so interesting to me as the tablet is new so no personal data are saved.
point 3 : How suppose to make a nandroid backup if no TWRP is intalled???
then.. i suppose that it mean to INSTALL a TWRP and just after make a nandroid backup right?
but...
just after ulock the bootloader and reaching step by step the point 7 and 8 of the guide,
after the command "fastboot boot recovery.img" the device reboot and go in permanent loop.
No way to access the recovery.
is there something that i may check? just once i been able to enter the twrp and the main problem were the impossibilty to access and format the /data partition so, no factory reset were possible and obviously no bbot as well (permanent boot loop).
Im not use adb tools, im only use sp fash tool.
I do it like this.
1 flash the downloaded Rom from Teclast with SP flash tool, to get all fresh.
2 Enable usb debug and oem unlock
3 copy in your device the stock boot.img from the folder firmware from the zip downloaded from Teclast,
4 in your device install the app Majisk manager and use it to patch your original boot.img
5 copy into sd the files magisk.zip, No verity opt encrypt.zip,
6 with sp flash tool flash the patched boot.img and the downloaded TWRP-3.2.3-TwrpBuilder-2019-01-18_20-02"]twrp renamed to recovery.img ”this was the only one trwp which works on my T20”https://github.com/TwrpBuilderTests/android_device_teclast_t20/releases/tag/TWRP-3.2.3-TwrpBuilder-2019-01-18_20-02
7 reboot in recovery with TWRP and install magisk.zip and no verity opt encrypt.zip