[Q] Samsung Galaxy Mini GT-S5570 - Android Q&A, Help & Troubleshooting

Hi guys!
My device seems to be dead.
I tried upgrading from GB2.3.4 to 2.3.6, and that's when the problem occurs.
I used ODIN 4.3.8 to flash the firm ware. But ODIN was downloading MIBIB for the past few hours.
And then, the screen appear a "Phone connecting to a PC, with a exclamation mark in between."
Any idea what has happened? In need of help desperately.
Thanks in advance.
Ben

Tried to flash cm-10.1-20130509-UNOFFICIAL
BenjaminCheng said:
Hi guys!
My device seems to be dead.
I tried upgrading from GB2.3.4 to 2.3.6, and that's when the problem occurs.
I used ODIN 4.3.8 to flash the firm ware. But ODIN was downloading MIBIB for the past few hours.
And then, the screen appear a "Phone connecting to a PC, with a exclamation mark in between."
Any idea what has happened? In need of help desperately.
Thanks in advance.
Ben
Click to expand...
Click to collapse
I also am receiving the same screen upon boot after trying to flash (cm-10.1-20130509-UNOFFICIAL) which I downloaded from a link here.
The info below is from stock mobile before crash:
Model number
GT-S5570
Android version
2.2.1
Baseband version
S5570DXKB1
Kernel version
2.6.32.9-perf
[email protected] #1
Build number
FROYO.DXKG2_______________________________
When I start my phone in recovery this is what I see:
Android System Recovery
Samsung Recovery Utils - for BML -
(then the Options are):
1) reboot system now
2) apply sdcard : update.zip
3) wipe data / factory reset
4) wipe cache partion
(Below that it reads):
#Manual Mode#
--Appling Multi - CSC--
multicsc : src /system/c
c/KOR/System/ .______________________________
Before I did flash I did a search on Sam Firmware and when it diagnosed my mobile it returned the following information:
Model : GT_S5570
Country : Open Asia
Version : Android 2.2.1
Changelist : N/A
Build date : N/A
Product Code: OLB
PDA : S5570DXKB1
CSC : S5570OLBKB1
Modem : None_____________________________
Before I proceeded with flash I installed; SuperSU and Root Checker.
I did a root diagnostic and the return was:
Root Checker
SU: su found [/system/xbin]
Version: 1.45; SUPERSU
Root Access: access granted
UID/GID: uid = 0(root)
gid = 0(root)
Unix Utils: busybox
/system/xbin/busybox
(I don’t know where busybox came from)
PATH: /system/xbin
/system/sbin
/sbin
/system/bin ____________________
Build Info from Root Checker
Board: GT-S5570
Boot Loader: Unkwn
Brand: SAMSUNG
CPU_ABI: armeabi
CPU_ABI2: Unkwn
Device: GT-S5570
Display: FROYO.DXKG2
Fingerprint: Samsung/GT-S5570/GT-S5570/GT-S5570:2.2.1/FROYO/DXKG2; - user/release-keys
Hardware: gt-s5570
Host: DELL135
ID: FROYO
Manufacturer: Samsung
Model: GT-S5570
Product: GT-S5570
Radio: Unkwn
Tags: release-keys
Type: user
Unknown: unknown
User: root______________________________________
I then proceeded to flash (cm-10.1-20130509-UNOFFICIAL), that I downloaded from a link off xda – forum.
About 3 minutes into the flash process it abruptly stopped.
I waited another 5 minutes before disconnecting the usb, then when I rebooted all I get is a screen with Phone connecting to PC with an exclamation mark between them.
If anyone can help me at this point, I would greatly appreciate your input.
Thank You for your time,
Ron Roby

Related

I have problem while I am updating my GARMIN-ASUS M20's Firmware (abi)

I have problem while I am updating my GARMIN-ASUS M20's Firmware (abi).
My M20 cellphone was bought in Continental China, and I want to update to the Hongkong Chinese Firmware.
I have got the Hongkong Chinese Firmware file (.abi) and I use USBLoader in WINDOWS XP, it shows:
=====================================
#####################################################################
# USB image transfer tool for Intel PXA27X USB Development Board #
# Version: 1220'04 Author: O.C #
#####################################################################
try to open \\.\wceusbsh001
try to open \\.\wceusbsh002
try to open \\.\wceusbsh003
The file C:\M20\M20_ALL_V4.5.0.abi was opened
Image total Size 177578153 bytes
Boot record image downloading.....
File C:\M20\M20_ALL_V4.5.0.abi total 177578153 byte read
Size of ACK_PACKET = 20 address of buffer=7c92e920
=====================================
and the program just stopped here.
an hour later the program does nothing.
On my phone screen, the all status is at 0 percent.
What should I do?
ShikiSuen said:
I have problem while I am updating my GARMIN-ASUS M20's Firmware (abi).
My M20 cellphone was bought in Continental China, and I want to update to the Hongkong Chinese Firmware.
I have got the Hongkong Chinese Firmware file (.abi) and I use USBLoader in WINDOWS XP, it shows:
=====================================
#####################################################################
# USB image transfer tool for Intel PXA27X USB Development Board #
# Version: 1220'04 Author: O.C #
#####################################################################
try to open \\.\wceusbsh001
try to open \\.\wceusbsh002
try to open \\.\wceusbsh003
The file C:\M20\M20_ALL_V4.5.0.abi was opened
Image total Size 177578153 bytes
Boot record image downloading.....
File C:\M20\M20_ALL_V4.5.0.abi total 177578153 byte read
Size of ACK_PACKET = 20 address of buffer=7c92e920
=====================================
and the program just stopped here.
an hour later the program does nothing.
On my phone screen, the all status is at 0 percent.
What should I do?
Click to expand...
Click to collapse
Isn't there anyone who can help me?
ShikiSuen said:
Isn't there anyone who can help me?
Click to expand...
Click to collapse
The only thing that I can offer - read Russian forum http://asusmobile.ru/board/viewtopic.php?t=21995 using Google translate. Remember that you can see attachments in the first post with flashing instruments only if you're registered. You free to ask there in English - we will answer.

[Q] Unable to root MTK6575 Chinese Android Phone

Hi , I have tried almost all method to root chinese Phone based on the below configuration none of the Method work
I want to get the root access and get rid of the chinese Rom and install any custome rom can some help me root this phone and guide hot flash the custom rom and where I can get the Rom for below configuration
Hardware : MT6575
Model : hexing15_6626_gb2
Build number : ALPS.GB2.MP.V2.6
Build date UTC : 20121105-041448
Android v : 2.3.6
Baseband
v: MAUI.11AMD.W11.50.SP.V18.F1, 2012/10/23 19:26
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Mon Nov 5 12:11:09 CST 2012
Hellions with BLUE flames !
Method Tried -
1. TPSparkyRoot
2.SuperOneClick
3 .MTKdroidTools
it does not get shell access ,
Can Some champ from XDA guide me how to root this Chinese phone
There is a Tool, which can root most Android 4.x devices:
http://forum.xda-developers.com/showthread.php?t=1886460
To use this tool, you need ADB drivers for your device. If you dont have them, here is a tutorial, how to get ADB drivers for your device:
http://forum.xda-developers.com/showthread.php?t=2157207
Kind regards Uwe
u.k-f said:
There is a Tool, which can root most Android 4.x devices:
http://forum.xda-developers.com/showthread.php?t=1886460
To use this tool, you need ADB drivers for your device. If you dont have them, here is a tutorial, how to get ADB drivers for your device:
http://forum.xda-developers.com/showthread.php?t=2157207
Kind regards Uwe
Click to expand...
Click to collapse
Thanks for sharing this
As attached in the Post and Config file my device is not branded and it runs Gingerbread 2.3.6
although I tried the method but it get stuck ..Gives the Following
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\sjaiswal22>cd dow
The system cannot find the path specified.
C:\Users\sjaiswal22>CD Downloads
C:\Users\sjaiswal22\Downloads>cd "china android project"
C:\Users\sjaiswal22\Downloads\china android project>cd Root_with_Restore_by_Bin4
ry_v18
C:\Users\sjaiswal22\Downloads\china android project\Root_with_Restore_by_Bin4ry_
v18>runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Normal Mode enabled!
.
Pushing busybox....
4155 KB/s (1085140 bytes in 0.255s)
Pushing su binary ....
2721 KB/s (91980 bytes in 0.033s)
Pushing Superuser app
4159 KB/s (996704 bytes in 0.234s)
Making busybox runable ...
.
adb: unable to connect for backup
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
error: device not found
Waiting for device to show up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
C:\Users\sjaiswal22\Downloads\china android project\Root_with_Restore_by_Bin4ry_
v18>runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Normal Mode enabled!
.
Pushing busybox....
3853 KB/s (1085140 bytes in 0.275s)
Pushing su binary ....
2641 KB/s (91980 bytes in 0.034s)
Pushing Superuser app
3877 KB/s (996704 bytes in 0.251s)
Making busybox runable ...
.
adb: unable to connect for backup
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
shanky76 said:
...If all is successful i will tell you, if not this shell will run forever.
Running ...
Click to expand...
Click to collapse
I am sorry, this method can only work on Android 4.x devices, because it uses a small security gap only available at 4.x android devices...
I was my fault, not to have read that you have 2.3.6
In this case, I will look, if I find something different for you
Kind regards Uwe
I used gingerbreak for my android 2.3 phone. But it wasn't a mtk6575 phone.
Thanks mate
Yes they are bit different stupid phones
none of the method specified could work i thought to do Manual rooting but that requires the TWRP to be ported .that is also failing .
I am keen to know how to root all Android Chinese phones too... I have a Hero H4300 MTK6573 device which I use for learning purposes.
no way to root s3/y1?
Hi I bought a ZTC SAMSUNG S3/Y1
i want to make it root but i can't i have read some topics about root but none of them works and also moborobo can not load my device name,
what can i do?
Please help
here is the list detail
linux version 2.6.35.7 ([email protected])(gcc version 4.4.3 (GCC) #1 PREEMPT MON MAR 4 19:06:18 CST 2013
BogoMIPS: 1998.84
Feauter: swp halt thumb fastmult vfp edsp thumbee neon vfpv3
Hardware: MT6575
Revision: 65fb8a00
try this, i am using last method (rooting via twrp) for lenovo a690, and it work fine ...
http://forum.xda-developers.com/showthread.php?t=1923764
Haier W910 Chinese -Rooting Worked with Oneclickroot
aramic said:
Hi I bought a ZTC SAMSUNG S3/Y1
i want to make it root but i can't i have read some topics about root but none of them works and also moborobo can not load my device name,
what can i do?
Please help
here is the list detail
linux version 2.6.35.7 ([email protected])(gcc version 4.4.3 (GCC) #1 PREEMPT MON MAR 4 19:06:18 CST 2013
BogoMIPS: 1998.84
Feauter: swp halt thumb fastmult vfp edsp thumbee neon vfpv3
Hardware: MT6575
Revision: 65fb8a00
Click to expand...
Click to collapse
Haier W910 Chinese -Rooting Worked with Oneclickroot
Worked with Oneclickroot ..google it You can fine easliy
You can try with that

[Help] Smartphone Pb80 Kliver---BRICK---root, rom, recovery

Hi, thank you for the Job in this forum!!..It's my first time here..and my first english tecnical discussion!!..sorry for that!!
First of all I have fought with google to search for drivers for this device that the computer sees as " Spreadtrum " (it will be the brand !) I downloaded a folder from the internet which is called " SCI -android -usb -driver- jungo - v4 " and among the three items not recognized in the device manager of windows I was able to install one !! .. and luckily it was "Android Composite ADB Interface " ...then with a program taken from www , kingoapp , com are able to perform to root the device in two minutes from PC ...
Finally, to overcome the problem of the space exhaustion, I installed to play store "root uninstaller " that allows us to uninstall , freeze or recover smartphone app by default ... And here the error or damage !!! :: I deleted the first "UC browser " (I think you call it that ) that I looked like a Chinese internet browser and the phone began to open windows error who say <interrupted processes> !! ... then I turned it off and it was the wrong thing because you're never more turned on again ... or at least does not go beyond the first part , as well as the Android logo to speak !! .. if I connect it to the computer in this state, it recognize the ADB interface at 2-second intervals !! ... therefore unusable !!
And now my real question : someone would be so kind as to tell me where I can find the stock rom to update from sd -card ?? .. and one last thing : how do I get into recovery before you start ?? ( the usual : POWER + VOL UP and VOL DOWN + POWER never worked even before it crashes )
I was not able to post here the rar folder of the driver and the manual issued by Kliver ... you can find these links on google drive:
drive.google.com/file/d/0B5_LYywCVsA1YlVQaXBSaHRFSm8/edit?usp=sharing
drive.google.com/file/d/0B5_LYywCVsA1Q3ZEckdGUTN3MEE/edit?usp=sharing
For the prog kingo is available for free on the site and the app is on the play store, version with some limitations but free !!
Have fun and let me know also trying to remove facebook and twitter !! ..
I could not find out what processor is installed, but is a one-core arm Cortex-A5 a 1.2 ghz...256mb of ram and only 124mb of ROM available to the user!!.....android 4.2
Idea
sorry for the insistence but enough for me just an idea on how to start it ..
excume for my english
I apologize for my incompetence in using this forum :crying::crying:
==== Wait for phone...
Phone found! [ 34 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name : c935w_pswplus_UUIhvga_fr
Model Brand : Spreadtrum
Model Device: c935w_psw
AndrVersion : 4.4.4
BaseBand CPU: C935W
Project Ver : 7715_4.4.4_c935w_psw_Voltage_fr_V03
Model Ext : c935w_psw
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7715_modem_sc7715_cp2.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img
AndroidInfo created
Firmware Size : 318 MiB
Saved to : C:\Users\kalid\Desktop\C935W_[NAND_b256k]_c935w_psw_4.4.4_7715_4.4.4_c935w_psw_Voltage_fr_V03_c935w_psw\
Done!
Q:someone would be so kind as to tell me where I can find the stock rom to update from sd -card
A:just go to "Factory Data reset" -> reset phone ->erase
when android show "Erasing" you just set VOL DOWN
but now i can't find any rom to put on can you help me
TO chlakh11787 how software are you using for this ???

Zte avid plus z828 frp solution please?

SOLUTION:
1. FIRST PUT PHONE IN FTM MODE
2. ROOT WITH KINGO ROOT
3. KEEP PHONE IN FTM MODE
4. USE GCPRO BOX TO REMOVE THROUGH ADB.
SIMPLE (smile)
PM ME FOR SOUTION AS IT RELATES TO THE ROOTING AND ADB
earching ADB device Please wait..
Device Detected...
model:= Z828
Androids Version:= 5.1.1
Description Version:= P890T09_MPCS-user 5.1.1 LMY47V 20160108.170111 release-keys
Platform:= msm8909 [ qcom ] [ msm ]
Warning Baseband is Unknown or damaged....
BusyBox version := 1.18.4
ANDROID-ID = ?_000040DF43
Detected su binary at /xbin
Detected su binary at /bin
SU Version..kingo 14
Device is Secure Rooted..uid=0
ANDROID FRP REMOVE STARTED...
!!! Success !!!!
Restarted phone...
Total Time Take...00:00:05

[HELP NEEDED] boot kitkat 4.4.2 mediatek device on offline charge mode

Hi guys, im doing a project which requires the tablet to auto start when power is available through USB.
im using a datawind tablet d705 model with a mediatek cpu and kitkat version 4.4.2.
Here is a info dump from MTKtools:
Hardware : MT8312D
Model : D705
Build number : ALPS.KK1.MP7.V1.25
Build date UTC : 20150727-023443
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V64, 2014/08/02 09:47
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Mon Jul 27 10:31:34 CST 2015
Uboot build v : -----
LCD Driver IC : 1-rgb_mt6571_wvga
i have attached files that will help with figuring out the file that is loaded to show charging animation.
i have also tried most of the available methods on various forums to try to boot the tablet but failed.
fastboot oem off-mode charge 0 does not work
1. search in /system/bin/ for playlpm, ipod, lpm, kpoc_charger or any other file that have inside some reference to battery animation.
2. edit that file, delete all content inside and add
#!/system/bin/sh
/system/bin/reboot
i have a ipod file but it is not used for animation, deleteting the file from boot.img makes no difference at all.
1. Unpack boot.img and edit init.rc.
2. Add following to the end of file:
#Check if chargermode and start autoreboot service.
on property:ro.bootmode=charger
start autoreboot
#autoreboott service which command reboot
service autoreboot /su/bin/su /system/bin/reboot -c reboot now
user root
oneshot
none of the above worked. i also tried various methods to edit init.rc and init.charger.rc but nothing worked.
could some one please help me with this. im ready to donate for your kind help

Categories

Resources