Can anyone help me where can I download S5830XWKPN full package file?
On samfirmware site they only provide one-package file.
Thanks alot!
that one package already include every files needed to fully flash your ace.
if you/re not sure, open that one package tar file using winrar, or 7zip. if you see 9 files total, then you're good
setya5785 said:
that one package already include every files needed to fully flash your ace.
if you/re not sure, open that one package tar file using winrar, or 7zip. if you see 9 files total, then you're good
Click to expand...
Click to collapse
I already did that, but I noticed those files are different compare to usual full package file like in KPH.
those are the individual file.
if you extract all 4 full package files using winrar, you'll get the same 9 individual files
setya5785 said:
those are the individual file.
if you extract all 4 full package files using winrar, you'll get the same 9 individual files
Click to expand...
Click to collapse
I'm confused. for full package, extension file names are ".md5".
But on a one package file some files don't have extension name.
What could be wrong?
those full package are also tar archieve. the same 9 files archieved seperately.
lol, you ectract onepackage, pack into 4 seperate archive and vise-versa
it doesn't matter as long as you have all 9 files needed. ODIN will extract all files and flash individual files.
for those who flash onepackage and failed, mostly due to incomplete onepackage.
You sure it'll work all right? You won't be able to flash the KPN 1 package from say 2.2 right?
setya5785 said:
those full package are also tar archieve. the same 9 files archieved seperately.
lol, you ectract onepackage, pack into 4 seperate archive and vise-versa
it doesn't matter as long as you have all 9 files needed. ODIN will extract all files and flash individual files.
for those who flash onepackage and failed, mostly due to incomplete onepackage.
Click to expand...
Click to collapse
Define an incomplete onepackage and a complete onepackage .
consegregate said:
You sure it'll work all right? You won't be able to flash the KPN 1 package from say 2.2 right?
Click to expand...
Click to collapse
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
EmoBoiix3 said:
Define an incomplete onepackage and a complete onepackage .
Click to expand...
Click to collapse
see above
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
I see.....you win .
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
Hello setya5785. nice explanation!
Just a few questions.
1. Some other mods here said that you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. they said, you must flash with any 2.3.3 with full package before flash KPN with one package file. is this true??
2. What do you recommend more, flash KPN with one package file? or extract files first and archive them with tar.md5 then flash??
Hope to here from you, thanks!
EmoBoiix3 said:
I see.....you win .
Click to expand...
Click to collapse
LOL, there's no win or lose
droidtwoseven said:
Hello setya5785. nice explanation!
Just a few questions.
1. Some other mods here said that you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. they said, you must flash with any 2.3.3 with full package before flash KPN with one package file. is this true??
2. What do you recommend more, flash KPN with one package file? or extract files first and archive them with tar.md5 then flash??
Hope to here from you, thanks!
Click to expand...
Click to collapse
1. it depends. if you can get a complete onepackage, it'll be safe. i flash from DXKC1 directly to XWKPN using onepackage file that include all files (well minus data.rfs, but not that it matter, as long as you wipe before flashing).
so basicly, check your file or where you get your file from.
i use this onepackage - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
most mod advice againts onepackage probably because, some uploader / site only give backup files from PDA files like system.rfs, boot.img, and some other (you can only get this from your phone using normal backup).
when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)
so check your files first.
4 speerate archieve can be easier to identify. but onepackgae file, you need to extract or open teh archieve in some archieving app (like winrar or 8zip)
2. if you already got onepackage file with all needed files. just use it.
setya5785 said:
as long as you use a full one package file. it's work.
all you need is this files :
amss
arm11boot
boot.img
data.rfs (optional)
csc.rfs
mibib
oemsbl
qcsbl
recovery.img
system.rfs
either you get it from a single archive (onepackage), or 4 archieves (seperated into appboot, code, csc and modem). it doesn't matter.
whatever you give ODIN, it will unpack the archieve to get all those files before actually flashing it into the device.
if you get 4 archieve version -like i said, you can actually extract a full onepackage, and pack it again into 4 archieve-
APBOOT tar.md5 should include :
arm11boot
mibib
oemsbl
qcsbl
CODE tar.md5 should include :
boot.img
data.rfs (optional)
recovery.img
system.rfs
CSC tar.md5 should include :
csc.rfs
MODEM tar.md5 should include :
amss
and yea, i did flash my stock froyo (2.2.1 DXKC1) directly into XWKPN.
see above
Click to expand...
Click to collapse
Hello setya5785. Nice explanation.
Just a few more questions.
1. Some mods and threads here said the you can't directly flash stock froyo (2.2.1 DXKC1) to KPN using one package file. They said that you must first flash with any 2.3.3 using full package file before you can flash KPN using one package file. Is this true??
2. About flashing froyo 2.2.1 DXKC1 to KPN what do you recommend more, flashing with one package file? or extracting one package file then archive certain files to .tar.md5 then flash??
Hope to hear form you! Thanks!
double post ? see reply above
Excellent explanation. Mind making a thread to include these details? Will clear up the many questions about flashing Samsung firmwares.
setya5785 said:
double post ? see reply above
Click to expand...
Click to collapse
Sorry for the double post. I thought I didn't post it at first. Thanks for the explanation men. I think I'm now ready to update my Ace.
Anyway, can you tell me more about this "when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)". You said I will stock on boot? What will I do when I encounter this?
i could, but it'll just be a copy and paste and redundant from this one.
might as well refer to this post/thread
droidtwoseven said:
Sorry for the double post. I thought I didn't post it at first. Thanks for the explanation men. I think I'm now ready to update my Ace.
Anyway, can you tell me more about this "when flashing only ginger's PDA files into froyo. you'll get stuck at boot. this is because froyo's bootloader can't boot ginger (and vide versa)". You said I will stock on boot? What will I do when I encounter this?
Click to expand...
Click to collapse
you'll mostly gonna get stuck at galaxy ace GT-5830 samsung boot screen.
when you do encounter this. just turn off your phone.
enter download mode, and flash another rom (back to froyo stock) or another ginger using another source.
setya5785 said:
you'll mostly gonna get stuck at galaxy ace GT-5830 samsung boot screen.
when you do encounter this. just turn off your phone.
enter download mode, and flash another rom (back to froyo stock) or another ginger using another source.
Click to expand...
Click to collapse
What could be the reason for this? The file/s??
You just said you successfully flash your stock froyo to KPN using one package file, can I ask you the files you used?
I can't download the file from the link you'd given
droidtwoseven said:
What could be the reason for this? The file/s??
You just said you successfully flash your stock froyo to KPN using one package file, can I ask you the files you used?
I can't download the file from the link you'd given
Click to expand...
Click to collapse
most incomplete (or should i say update/version) or onepackage only include pds files backup. there's no bootloader, modem/phone/baseband.
so if you flash this ginger's update into froyo, your phone still using froyo's bootloader and baseband. this bootloader can't load ginger's system.
this is why most will advice to flash any full package ginger, to get the bootloader.
but if you already have the full onepackage, it's good to go.
i use XWKPN from the on i linked at post #12
there's 9 mirror from that multiupload link.
i need to extract the amms inside the ROM (which is a tar.md5 file), I tried to extract it with 7zip, but creating a new .tar with the file and using it to flash the baseband, Odin gets stuck on "download AMSS".
i need the amss from a 5830L, i tried to flash the amss from 2.3.4 stock rom in the russian 2.3.6, but for some reason after that the phone starts to lag, so i think i need the amss from the same version.
anyone know how to extract the amss and create a valid file to flash with?
You need to use Linux/Ubuntu to change the permissions from rwxrwxrwx back to rw-r--r--
Herpderp Adreno + Tegra.
You can only extract the file in 7Zip and repack it to Tar. However, you cannot repack it to a Odin Flashable tar. The way to do it is using either Linux or if on a Windows Machine, then Install Cygwin and run the commands from there. The commands is as follows:
tar -H ustar -c filename1.ext filename2.ext filename3.ext filename4.ext > OdinFlash.tar
Include all files to be packed including their extentions by replacing filename#.ext with the relevant filenames to be packed. The resultant tar will be flashable in Odin.
thanks, work perfectly
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Well its simple just rename it to .tar and use winrar to extract it. the md5 extension makes odin calculate a hash to check if the firmware you're flashing is not corrupted.
hi,
I did that and I got a message "there is no correct record at the end of archive"
the files are extracted but I think it is corrupted because dsixda kitchen can't read it.
just extract it by 7-Zip and don't care about message
I have this problem too, my 7-zpi say that can´t open file format unknowed or damage.
your download maybe interupted, try download it again and do md5 checksum
Ace Duos Kernel
how to get s6802 custom kernel??
jeckyvanz said:
how to get s6802 custom kernel??
Click to expand...
Click to collapse
You can find a beta release custom kernel for the Samsung Galaxy Ace Duos from here.
kernel
thanks. but the download link doesnt work again.
MD5
I've problem with restoring through CWM.
it said "md5 sums mismatch. how to troble it?
logic5 said:
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Click to expand...
Click to collapse
You might be opening the wrong file.
You have to download 2 files:
xxxx.tar
xxxx.tar.md5
the first one is the one you have to open.
the second one is the one that only have the MD5 result of the first.
( http://en.wikipedia.org/wiki/MD5 )
jeckyvanz said:
I've problem with restoring through CWM.
it said "md5 sums mismatch. how to troble it?
Click to expand...
Click to collapse
Redownlaod and try to unzip again. Kitchen should open it, make sure u have kitchen scripts for your phone or edit from flashable zip. Afaik
best idea
dont use 7zip but use unoversal extractor. it will extract everything.
I have the same issue for 5301. I have to get either the recovery or system img for creating a custom rom. Usually samsung firmware files can be extracted using izarc, 7zip or universal extract tool. some can be opened with ultraISO or similar tool. I tried dsixdas kitchen as well. That does not even acknowledge this ROM. These firmwares come as a single tar file with md5 sum attached. There is something different about this ROM file that wont even let let the regular tools see what is inside the file. I tried to open it with a hex editor and it looks similar what a regular tar.md5 file would look. Looking at the log file from universal extractor:
TrID/32 - File Identifier v2.02 - (C) 2003-06 By M.Pontello
Definitions found: 2641
Analyzing...
Collecting data from file: C:\Technical\S5301XXALJ7_S5301OXXALJ8_S5301XXLJ7_HOME.tar.md5
99.3% (.TAR) TAR archive (149/5)
0.6% (.LZMA) LZMA compressed file (1/1)
7-Zip Tar archive extractions cannot be logged.
If Odin can flash these files using the same boot, recovery and system... images then there must be a way to extract these img files. wonder if odin extracts to a temp location?
Here is a link to the file http://hotfile.com/dl/198648982/cfb...5301_EUR_1_20130214151121_61bveu8l1b.zip.html
logic5 said:
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Click to expand...
Click to collapse
Use odinatrix to extrat system.img n modem files..
Its the easiest tool do so...
U may also use splitfus2 bt its way trickier to use than odinatrix.
masum73 said:
I have the same issue for 5301. I have to get either the recovery or system img for creating a custom rom. Usually samsung firmware files can be extracted using izarc, 7zip or universal extract tool. some can be opened with ultraISO or similar tool. I tried dsixdas kitchen as well. That does not even acknowledge this ROM. These firmwares come as a single tar file with md5 sum attached. There is something different about this ROM file that wont even let let the regular tools see what is inside the file. I tried to open it with a hex editor and it looks similar what a regular tar.md5 file would look. Looking at the log file from universal extractor:
TrID/32 - File Identifier v2.02 - (C) 2003-06 By M.Pontello
Definitions found: 2641
Analyzing...
Collecting data from file: C:\Technical\S5301XXALJ7_S5301OXXALJ8_S5301XXLJ7_HOME.tar.md5
99.3% (.TAR) TAR archive (149/5)
0.6% (.LZMA) LZMA compressed file (1/1)
7-Zip Tar archive extractions cannot be logged.
If Odin can flash these files using the same boot, recovery and system... images then there must be a way to extract these img files. wonder if odin extracts to a temp location?
Here is a link to the file http://hotfile.com/dl/198648982/cfb...5301_EUR_1_20130214151121_61bveu8l1b.zip.html
Click to expand...
Click to collapse
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
frankito777 said:
You might be opening the wrong file.
You have to download 2 files:
xxxx.tar
xxxx.tar.md5
the first one is the one you have to open.
the second one is the one that only have the MD5 result of the first.
( http://en.wikipedia.org/wiki/MD5 )
Click to expand...
Click to collapse
Now there is only one xxx_home.tar.md5 file..
That was old days.
Be a part of new world.
N now u cnt extract through an archve manager.
U need espicial tools like splitfus2 n odinatrix to extract files.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
Thanks SArnab! so finally I am able to split the files using odinatrix. Now for this type of turbo ROMs how do I create odin flashable file???
I created a regular odin tar file with md5 sum but that does not go past 'NAND Write Start'. Please advise.
masum73 said:
Thanks SArnab! so finally I am able to split the files using odinatrix. Now for this type of turbo ROMs how do I create odin flashable file???
I created a regular odin tar file with md5 sum but that does not go past 'NAND Write Start'. Please advise.
Click to expand...
Click to collapse
Your pc shud b superfast so that odintrix can work witout lag.
My HP G6 lapi took around 10 mins to extrqct the one .tar.md5 file..
The tool will automatically extract diffrnt .tar files such as modem_xxx.tar pda_xxx.tar n csc_xxx.tar
Now u can use these to flash through odin witout any prb.
U can use pda.tar in kitchen to get boot.img n system.img.
Kitchen will also help u extract sysmtem foldr from system.img.
U can also flash through odin the single .tar.md5....
Choose that in pda field...
Odin is smart enough to do rest of the part.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
Appreciate the quick response. I guess my question was not clear enough. I extracted the recovery and created a clockwork recovery named recovery.img. Now I want to flash this recovery back on the device. I created the tar file using:
tar -H ustar -c recovery.img > CWMrecovery.tar
md5sum -t CWMrecovery.tar >> CWMrecovery.tar
mv CWMrecovery.tar CWMrecovery.tar.md5
When I flash this using odin3_v3.07 md5 is verified but he flash does not go through and stops at NAND write start. Is there a special way to create a odin flashable tar.md5 file foe these turbo firmwares?
masum73 said:
Appreciate the quick response. I guess my question was not clear enough. I extracted the recovery and created a clockwork recovery named recovery.img. Now I want to flash this recovery back on the device. I created the tar file using:
tar -H ustar -c recovery.img > CWMrecovery.tar
md5sum -t CWMrecovery.tar >> CWMrecovery.tar
mv CWMrecovery.tar CWMrecovery.tar.md5
When I flash this using odin3_v3.07 md5 is verified but he flash does not go through and stops at NAND write start. Is there a special way to create a odin flashable tar.md5 file foe these turbo firmwares?
Click to expand...
Click to collapse
Sorry, I have no idea bout wat u r talkin.
I never did this so cant help u in tis part.
Oh ya where did u put the tar file in odin??
In pda fieled or csc or modem??
I think its need to be in pda field.
I cnt help more on this.
But ya I wnt leave it here.
A user named Deadly can help u.
He is great in converting odin to cwm n cwm to odin.
Hope u understan wat I mean.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
System App
how to install custom system ui/android status bar on system. my device gt-s6802. what's compatible with mine??
I've read that the latest 4.0.4 release (XWLPO) still has MMC_CAP_ERASE enabled in it's kernel.
Am I correct in thinking if I replace the zImage file in XWLPO's tar.md5 file with Siyah 3.4.1's zImage file, then flash the firmware through Odin then:
1. I will eliminate the possible brick bug
2. Device will be automatically rooted
I might replace the new bootloader (Sbl.bin) with the old one while I'm at it.
I know I'll have to install Tungstwenty's 4.0.4 camera/video fix after flashing.
Is there anything else I should consider if tweaking the official SamMobile tar file?
Cheers
...
I've tried updating the .tar.md5 archive but I have the following problems/questions:
1. When I open the XWLPO .zip file, as well as the .tar.md5 file, there is an SS_DL.dll file. What is this?
2. When I open the .tar.md5 archive with 7Zip it says "no correct record at the end of the archive"
3. Probably because of this error, if I try to update the archive 7Zip then says "not implemented"
Does anyone know how I can add/replace files in a SamMobile .zip file please?
Thanks
1-Ignore this file. Not needed for nothing.
2-Remove .md5 from the the end of extension .tar.md5 and 7zip open file without problem.
3-7zip does not update tar file. You have to unpack the whole archive and recreate the tar file