I have a 16GB Nook Tablet running the latest Liquid Smooth 4.2.2
To boot up my nook I have to reboot into recovery 2 times before I can reboot system into my tablet. The first recovery is 5.00.x - blue CWM recovery and then when it boots up into recovery again it boots into 6.x CWM recovery - orange with carbon fiber background. Why is it doing this? Any way to stop it? Any help on this issue is appreciated
I suspect this has to do with how you installed your ROM. Did you by any chance do it from CWM 5 without installing CWM properly?
hipsterindian said:
I have a 16GB Nook Tablet running the latest Liquid Smooth 4.2.2
To boot up my nook I have to reboot into recovery 2 times before I can reboot system into my tablet. The first recovery is 5.00.x - blue CWM recovery and then when it boots up into recovery again it boots into 6.x CWM recovery - orange with carbon fiber background. Why is it doing this? Any way to stop it? Any help on this issue is appreciated
Click to expand...
Click to collapse
Perhaps you have a bootable SD card with CWM in the slot?
If so remove the card and reboot to see if the problem goes away
If it's not the case, you can try flashing one of flashable_CWM_6.0.x.y.zip from Succulent's recovery repository http://goo.im/devs/succulent/acclaim/recovery.
digixmax said:
Perhaps you have a bootable SD card with CWM in the slot?
If so remove the card and reboot to see if the problem goes away
If it's not the case, you can try flashing one of flashable_CWM_6.0.x.y.zip from Succulent's recovery repository http://goo.im/devs/succulent/acclaim/recovery.
Click to expand...
Click to collapse
See it booted properly know. Funny thing is I was trying for ages to get a bootable sd. I eventually gave up and just flashed on my internal sd.
Related
I just flashed Calkulin's ROM but when I reboot, I keep getting stuck at the "gtablet" screen.
I followed these exact directions except I did a wipe before and after flashing.
http://forum.xda-developers.com/showthread.php?t=865245
Any help?
Had a similar problem myself. The way i fixed it is by replacing "part 9" with the recovery image from clockwork and renaming it part 9 (then you reflash again). What this does it install clockwork on your tablet again. Once you get back into clockwork you need to partition your SD card to 2mb/0 swap. Once that finishes you should be able to reboot fully.
thanks
tyranie909 said:
Had a similar problem myself. The way i fixed it is by replacing "part 9" with the recovery image from clockwork and renaming it part 9 (then you reflash again). What this does it install clockwork on your tablet again. Once you get back into clockwork you need to partition your SD card to 2mb/0 swap. Once that finishes you should be able to reboot fully.
Click to expand...
Click to collapse
thanks that really worked
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Tho San Thanh Pho said:
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Click to expand...
Click to collapse
I'd reflash recovery and see what that does.
Tho San Thanh Pho said:
Hi! My friend has a 16gb nook tablet and It only boots into cwm recovery. I tried to flash stock 1.4.2 firmware onto it through sd card method, but it it shows an "X" in the upper right hand corner and then shuts down.
Status of the NT: Can boot into recov. but says cant mount or open /cache/recovery/ [....]
can boot by sd card.
can someone help?
he says that he was on CM9 but tried to go to stock but then boot looped it somehow then flashed jandycane then to stock then CM7 then after doing something, it only boots into recovery now....
Any help appreciated!:good:
Click to expand...
Click to collapse
worse comes to worst flash adamoutlers total wipe ubuntu flash to revert to 1.4.0 stock
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
worse comes to worst flash adamoutlers total wipe ubuntu flash to revert to 1.4.0 stock
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
I will tell my friend this.
[EDIT] He has updated me with some information and boot from sd card as he has tried the usb method and the power+ n home method and he hasn't got the CWM to boot from the sd card, but It does boot the stock firmware restore using the usb method but that doesn't work because of the red "X"...
He also had Cyan boot installed with CM7 but it goes straight to recovery instead of regular booting.
[EDIT2] OK. He told me after a whole day trying to get the Nook to boot off the sd card but he couldn't.... He just wants to know if this Is this a common bug. He also says that He could view the sd card contents in CWM but flashing anything onto internal doesn't work. Any Help Appreciated! :]
[EDIT3] My friend finally gave me his nook to see what was wrong with what he was doing and he didn't do the usb method... I got it booting from sd card now...
Recently decided to try and switch over to CM10, and have been having an issue with recovery. Both of the latest CWM and TWRP recoveries freeze for me after booting into them. The only recovery that works for me is the one that is flashed with the old app by Indirect but that flashes a really old CWM recovery. The recoveries that I have tried flashing are the ones linked to in the http://forum.xda-developers.com/showthread.php?t=1877217 thread. Both http://celticstorage.co.uk/cm10/CWM_v6.0.1.5_emmc.zip and http://celticstorage.co.uk/cm10/TWRP_v2.3.1.1_emmc.zip are doing it. I have a 16GB that ive kept (rooted) stock forever.
What happens is i go to boot to recovery, go through cyanoboot to recovery, and then CWM freezes up and blackscreens after I try to wipe something or install a zip, TWRP just locks up immediately and gives me a black screen. Any help fixing this would be greatly appreciated.
Use this thread to install CWM, I'm not a fan of TWRP. http://forum.xda-developers.com/showthread.php?p=25786947 I used this and had no problems updating
Sent from my NOOK Tablet running CM10
deltantor said:
Recently decided to try and switch over to CM10, and have been having an issue with recovery. Both of the latest CWM and TWRP recoveries freeze for me after booting into them. The only recovery that works for me is the one that is flashed with the old app by Indirect but that flashes a really old CWM recovery. The recoveries that I have tried flashing are the ones linked to in the http://forum.xda-developers.com/showthread.php?t=1877217 thread. Both http://celticstorage.co.uk/cm10/CWM_v6.0.1.5_emmc.zip and http://celticstorage.co.uk/cm10/TWRP_v2.3.1.1_emmc.zip are doing it. I have a 16GB that ive kept (rooted) stock forever.
What happens is i go to boot to recovery, go through cyanoboot to recovery, and then CWM freezes up and blackscreens after I try to wipe something or install a zip, TWRP just locks up immediately and gives me a black screen. Any help fixing this would be greatly appreciated.
Click to expand...
Click to collapse
This has been happening to me occasionally. I have found that when I get the black screen, pressing the Power button launches Recovery (CWM in my case). See if that works for you.
I now have the exact same problem. I've always ran off emmc. It says cwm 6.0.1.5 is installed. When I try to either wipe, or install zip-from-sd, cwm freezes then goes to the black screen. I cannot install any zips, so right now the tablet has nothing installed only a freezing cwm recovery it seems. I can use the power button to get out of the black screen and into cwm thru cyanoboot all day, but get nothing but these same steps reoccurring. Freeze, then black sod. I'm ready to try anything but cannot flash anything.
To the rescue
Ok, I have posted this on a different day. Try this with a blank sd card. Look at the bottom post called "Here is a video"
It a external boot cwm v.5 but you can copy this into your sd then flash and you have cwm v6.0.1.5 internal. Either way you have two ways to do recovery (external and internal):victory:
djd338 said:
I now have the exact same problem. I've always ran off emmc. It says cwm 6.0.1.5 is installed. When I try to either wipe, or install zip-from-sd, cwm freezes then goes to the black screen. I cannot install any zips, so right now the tablet has nothing installed only a freezing cwm recovery it seems. I can use the power button to get out of the black screen and into cwm thru cyanoboot all day, but get nothing but these same steps reoccurring. Freeze, then black sod. I'm ready to try anything but cannot flash anything.
Click to expand...
Click to collapse
Thanks very much for the reply & link!
I'll do this ASAP when I get back home & report. Thx again!
Sent from my Nexus 7 using Tapatalk 2
Well, I think I need to clarify more. Maybe somebody can help if I give more info. I've had cm7 running perfect, then decided to install cm10. I first flashed a cwm 6.0.1.5 zip to emmc. I did a factory reset via this recovery thinking my next move would be to flash the cm10 zip I'd put on the sd. No joy. This is where I'm at now.
In recovery it freezes and reboots to the "2 androids" screen with a sod. I hold power for 20 sec.s to turn off, then turn back on and get to cyanoboot fine. There, if it's allowed to just boot it freezes at the 2 androids. If I hold "n" to get the menu and recovery (6.0.1.5) it looks normal, will boot to recovery OK until anything is selected like the cm10 zip. It freezes before any selections can be finalized, and boots to that sod screen.
I know nothing of ubuntu! Sorta scared to go there with my limited knowledge. But will read up if it's required. Is it possible that this new recovery image don't play with what is currently on the sd? Is there anything I can put there that it may recognize in order to get a flash? Man, I'm lost!
Look pass the fear and go one step at a time, before you know it, your there.
It looks like you have already resolved this from this thread.
Ok, basically I'll go step by step.
1. Download ubuntu iso from ubuntu website (you can donate or put 0$ then download iso) and burn it to cd. 5 minutes
2. Stick the cd into a system that you don't plan to look at the video that is showing you the process and boot it up from a reboot and not from within windows. Select the left square which basically load the ubunbu from cd but does not install anything to your hard drive.3 minutes
3. You can view the whole video but I would skip to the section in video (3:28 watch to 4:43, 6:56 watch to 8:06 ) where I mentioned the setting the two flags in your sd after quick format fat32 and extracting the four files into your sd within ms windows platform from the post . I did this with a normal mini sd card adapter and not the usb stick adapter he used in the video. Since you are doing this to a blank mini sd then there really nothing to worry about since it is blank in the first place. 2 minute
4. If you had your apps backup with titanium backup then it still will be on the main mini sd and not the one that working with for this recovery.
5. I notice you did not mention wipe dalvik cache from your post. You should always wipe dalvik then wipe factory then do a single flash to test boot up.. You can flash gapps after a successful boot up into jellybean. (here's a video showing that I'm using external cwm v.5 even though its recommended to use v.6 .) You can always use cwm v.6 on your next cm10 test rom or use cwm v.6 to reflash to same rom once a successful boot up have been obtained with external cwm v.5. This purpose is to get it running on your nt.
6. Be patient for the first boot. Should not be more than 5 minutes max. It will look black then load. If it boot loops then wipe dalvik then wipe factory and do a single flash to test boot up again.
This will at least get cm 10 flavored rom on to your nt.
djd338 said:
Well, I think I need to clarify more. Maybe somebody can help if I give more info. I've had cm7 running perfect, then decided to install cm10. I first flashed a cwm 6.0.1.5 zip to emmc. I did a factory reset via this recovery thinking my next move would be to flash the cm10 zip I'd put on the sd. No joy. This is where I'm at now.
In recovery it freezes and reboots to the "2 androids" screen with a sod. I hold power for 20 sec.s to turn off, then turn back on and get to cyanoboot fine. There, if it's allowed to just boot it freezes at the 2 androids. If I hold "n" to get the menu and recovery (6.0.1.5) it looks normal, will boot to recovery OK until anything is selected like the cm10 zip. It freezes before any selections can be finalized, and boots to that sod screen.
I know nothing of ubuntu! Sorta scared to go there with my limited knowledge. But will read up if it's required. Is it possible that this new recovery image don't play with what is currently on the sd? Is there anything I can put there that it may recognize in order to get a flash? Man, I'm lost!
Click to expand...
Click to collapse
Got it back! Thank you for your help & patience. Also for the timely responses. I now have a bootable "recovery sd card" for curing these type problems. I've labeled it & filed away for any future borks of this kind! And I have cm10 up & running stable.
Thank you!
Sent from my Nexus 7 using Tapatalk 2
Hi Guys,
I've tried installing Superuser via this method.
http://forum.xda-developers.com/showthread.php?t=2038464
Everything was going good, I ran the commend to flash twrp blob, i rebooted the tablet and it booted up.
I copied the SU.zip file on my sd card slot and I tried botting back into recovery.
All that happens now is that the tablet just loops at the the device is unclocked screen..
Help please?
Thanks
coolhandluke111 said:
Hi Guys,
I've tried installing Superuser via this method.
http://forum.xda-developers.com/showthread.php?t=2038464
Everything was going good, I ran the commend to flash twrp blob, i rebooted the tablet and it booted up.
I copied the SU.zip file on my sd card slot and I tried botting back into recovery.
All that happens now is that the tablet just loops at the the device is unclocked screen..
Help please?
Thanks
Click to expand...
Click to collapse
can you get into recovery ?
(hold volume down while booting)
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
Ultimately, I want to install the CM11...
Thanks in Advance
I used the Root Recovery Tools to run the 4.0.4.8
PfanneKuchenAngriff said:
Hi, I am new to the whole jailbreaking. I followed this video (hZyfWpBJpiE) to root the tablet (6 gb).
In this process, I used NT16or8gbV47SDimagefile and I set the tablet to factory setting, deleted partitions, and deleted dalvik cache. I may have repeated this process because i thought it wasnt rooted because my screen looked different from the video guys tablet
Then followed this video (GZAQpeCtFi0) to install CWM Recovery 4.0.4.8. It booted to the recovery setting screen but I started seeing green lines to the right of my screen then it shut off to restart.
It wouldnt respond when I tried it again so I repeated the first process and tried again but still, same thing happens.
Does anyone have ideas on how to fix this?
...
Click to expand...
Click to collapse
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
digixmax said:
You should not have deleted any partition. Also I am not aware of a CWM v4.0.4.8 for the Nook Tablet, are you sure you downloaded tools intended for the Nook Tablet?
I'd suggest that you try the recovery-to-stock method posted at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/. See http://forum.xda-developers.com/showthread.php?t=2575489 for more info/pointers.
Click to expand...
Click to collapse
Thanks for your reply. I was able to get it back to factory setting but when following direction i get a message that says E: unable to mound /bootdata
I have no idea what is going on anymore
PfanneKuchenAngriff said:
Thanks for your reply. I was able to get it back to factory setting ...
Click to expand...
Click to collapse
Meaning you were able to get your NT back to running stock ROM?
but when following direction i get a message that says E: unable to mound /bootdata
...
Click to expand...
Click to collapse
Which direction are you referring to?
digixmax said:
Meaning you were able to get your NT back to running stock ROM?
Which direction are you referring to?
Click to expand...
Click to collapse
I was able to get back to running stock ROM. Then I followed the other linke ttp://forum.xda-developers.com/show....php?t=2575489
After I went through the directions, I got the unable to mount error
Which version of recovery did you use?
digixmax said:
Which version of recovery did you use?
Click to expand...
Click to collapse
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
PfanneKuchenAngriff said:
I rooted the NT with: NT16or8gbV47SDimagefile.img
I used this version: flashable_CWM_6.0.4.8_chrmhoffmann
And I have these to install:
cm-11-20141102-NIGHTLY-acclaim
gapps-kk-20140606-signed
I think I tried 3 different ways to install it...do I need both TWRP and CMW recovery?
I read that TWRP was buggy and when it didn't work, I tried CMW recovery.
Right now, I have the NT back to rooted stated and nothing else. I followed this direction last, I think:
http://forum.xda-developers.com/showthread.php?t=2692403
The other video said I can use the root flasher app to run the CMW recovery so I tried that as well
Thanks
Click to expand...
Click to collapse
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/showthread.php?t=2670589).
digixmax said:
Since your NT is running (rooted) stock, you'd need SD-based recovery to flash CM/Gapps onto EMMC. Flashing CM11 requires CWM version later than 6.0.4.5 or TWRP version later than 2.6.3.0, unfortunately there does not seem to be any compilation of SD-based CWM versions 6.0.4.5 or later for the Nook Tablet, hence we are stuck with TWRP 2.6.3.0+ as the only SD-based recovery for flashing CM11 onto the NT. (The flashable_CWM_6.0.4.8_chrmhoffmann is for flashing CWM 6.0.4.8 onto your NT EMMC to replace the stock recovery; the root flasher app recovery is likely a too old recover version to be compatible with CM11).
A potential alternative course of action is to first flash CM10.x for which there are SD-based CWM recovery available (see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163), then upgrade from CM10.x to CM11 (see http://forum.xda-developers.com/nook-hd/general/how-to-updating-hd-hd-internal-emmc-to-t2863171).
Click to expand...
Click to collapse
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
If normal, I will try to upgrade to cm11. This is a huge improvement though Thanks!
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
PfanneKuchenAngriff said:
I think I was able to get through the first step in loading cm 10...
Is it normal for cyanoboot to show up before the cyanogenmod flash??
Click to expand...
Click to collapse
Yes
PS. the update from CM10x to CM11 seems to be only for HD or HD+...would this work with NT?
Click to expand...
Click to collapse
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
digixmax said:
Yes
Sorry, the correct URL for the NT CM10.x to CM11 update is http://forum.xda-developers.com/showthread.php?t=2670589.
Click to expand...
Click to collapse
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)? Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
PfanneKuchenAngriff said:
Thanks so much for all your help! For this step do I upload the files straight into the device (not the SD card)?
Click to expand...
Click to collapse
Either way would work.
Also, do i use the flashable_CWM_6.0.4.5_chrmhoffmann.zip or could I use the 6.0.4.8?
Click to expand...
Click to collapse
Your choice.
FWIW I am using 6.0.4.8 on my NT (running CM11 snapshot M12).